User Manual Thank you for buying a Samsung camera. This manual will guide you through using the camera, including capturing images, downloading images and using the application software. Please read this manual carefully before using your new camera.
Instructions Getting to know your camera ƈ Use this camera in the following order. Set up the camera driver Take a picture Insert the USB cable Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in Application software CD-ROM. (p.101) Take a picture. (p.17) Insert the supplied USB cable into the PC’s USB port and the camera’s USB connection terminal. (p.
Danger DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. ƈ Do not attempt to modify this camera in any way. To do so may result in fire, injury, electric shock or severe damage to you or your camera. Internal inspection, maintenance and repairs should only be carried out by your dealer or Samsung Camera Service centre.
Caution CAUTION indicates a potentially hazardous situation which, if not avoided, may result in a minor or moderate injury. ƈ Leaking, overheating, or damaged battery could result in fire or injury. ҮUse battery with the correct specification for the camera. ҮDo not short circuit, heat or dispose of battery in fire. ҮDo not insert the battery with the polarities reversed. ƈ Remove the battery when not planning to use the camera for a long period of time.
Contents ƈPlaying back a still image ōōō45 ƈPlaying back a movie clip ōōō45 ƈMovie clip capture functionōōō46 ƈOn camera movie trimming ōō46 ƈPlaying back a recorded voice ō47 ƈPlaying back a voice memo ōō47 ƃLCD monitor Indicator ōōōōō48 ƃUsing the camera buttons to adjust the camera ōōōōōōōōō48 ƈPlay mode button ōōōōōō48 ƈThumbnail / Enlargement button / Volume button ōōōōōōōō49 ƈInfo / Up (Ɗ) button ōōōōō50 ƈPlay & Pause / Down (ƌ) button ō51 ƈLeft (Ȝ) / Right (Ȟ) / Menu / OK button ōōōōōōōōōōō51 ƈDelete
System chart Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre. < Included items > Computer Camera case User manual, Product warranty DPOF compatible printer (see p.71) Camera strap Software CD (see p.101~102) SD memory card / MMC (see p.12) AC adapter (SAC-45) / USB cable (SUC-C2) PictBridge compatible printer (see p.
Identification of features Front & Top Power button Shutter button Speaker Face Recognition (FR) / Lock button Flash Self-timer / AF lamp Lens Microphone ŝ6Ş
Identification of features Back Earphones jack Zoom W (Thumbnail) / Zoom T (Digital zoom) / Volume button Camera status lamp LCD monitor Camera strap 9 button touch pad (Smart button) ŝ7Ş
Identification of features ƈ Self-timer lamp Side / Bottom Icon Status Blinking Blinking Battery chamber Memory card slot Blinking Description For the first 8 seconds, the lamp blinks at 1 second intervals. For the final 2 seconds, the lamp blinks quickly at 0.25second intervals. For the 2 seconds, the lamp blinks quickly at 0.25-second intervals before taking a picture. A picture will be taken after about 10 seconds and 2 seconds later a second picture will be taken.
Connecting to a Power Source ƈ You should use the rechargeable battery (SLB-0837) supplied with the camera. Be sure to charge the battery before using the camera. Battery life / Number of images Conditions MP3 Approx. 210 MIN Using the fully charged battery Turning off the LCD monitor PMP Approx. 135 MIN Using the fully charged battery ƈ SLB-0837 rechargeable battery Specification Model Multi Media SLB-0837 Type Lithium Ion Capacity 860mAh Voltage 3.
Connecting to a Power Source ƈ You can charge the rechargeable battery (SLB-0837) by using the SAC-45 KIT which consists of the AC adapter (SAC-45) and the USB cable (SUC-C2). When the SAC-45 and SUC-C2 are combined, they can be used as an AC cable. ƃ Using an AC cable : Connect the AC adapter to the USB cable. It can be used as a power cable. ƃ Using a USB cable : Remove the AC adapter (SAC-45). You can download stored images to your PC (p.104) or supply the power to your camera through the USB cable.
Connecting to a Power Source CAUTION ƃ Before inserting any cables or AC adapter, check the directions and do not insert by force. It may cause breakage of cable or camera. ƃ If the charging LED of the AC Charger does not turn on or blink after inserting the rechargeable battery, please check whether the battery is inserted correctly. ƃ If you charge the battery with the camera power on, the battery can't charge fully. Turn the camera off while charging the battery.
Instructions on how to use the memory card ƃ Be sure to format the memory card (see p.83) if you are using a newly purchased memory card for the first time, if it contains data that the camera cannot recognise, or if it contains images captured with a different camera. ƃ Turn off the camera power whenever the memory card is being inserted or removed. ƃ Repeated use of the memory card will eventually reduce the memory card’s performance. Should this be the case, you will need to purchase a new memory card.
Instructions on how to use the memory card INFORMATION ƃ Don't remove the memory card when the camera status lamp is blinking as this may cause damage to data in the memory card. ƈ When using a 512MB MMC (Multi Media Card), the specified shooting capacity will be as follows. These figures are approximate as image capacities can be affected by variables such as subject matter and memory card type. Recorded image Super Fine size ƈ The camera can use SD Memory Cards and MMC (Multi Media Cards).
When Using the Camera for the First Time ƈ When the camera is turned on for the first time, a menu will be displayed to set date, time and language in the LCD monitor. This menu will not be displayed again after setting up the date, time and language. Set up the date, time and language before using this camera. ƃ Turning on the camera To turn on the camera, press the Power button ( )ڹor Open the camera ( )ںas shown. ƃ Setting up the language 1.
Starting the recording mode ڹ ں10 00:00:00 : Optical / Digital Zoom bar / Digital Zoom rate (p.23) ۄ : Battery (p.11) : Number of available shots remaining (p.13) ۅ : Image size (p.29) ۆ : Image quality / ۇ : Continuous shot : Metering (p.31) ؆ : ISO (p.31) ؇ : White Balance ؈ : Exposure ؉ 2007/02/01 01:00 PM : Date/ Time (p.79) ؊ : Camera shake ؋ : Auto Focus Frame : Available recording time (Movie clip / Voice recording) (p.13) ڻ ڼ Frame rate (p.
Starting the recording mode Selecting modes ƈ Mode icons ƈ You can select the desired working mode using the M (Mode) button located on the back of the camera. Mode AUTO PROGRAM MOVIE ASR SHOOTING NIGHT PORTRAIT CHILDREN LANDSCAPE CLOSE-UP TEXT SUNSET Press the M button and a menu show aside will display. Select a desired mode by using the Smart button.
Starting the recording mode ƈ How to use the AUTO mode ( ) Please select this mode for quick and easy picture taking with minimal user interaction. 1. Insert the battery (p.11) taking note of the correct polarity (+ / -). 2. Insert the memory card (p.11). As this camera has a 10MB internal memory, it is not essential to insert the memory card. If the memory card is not inserted, an image [AUTO mode] will be stored in the internal memory.
Starting the recording mode ƈ Pausing while recording a movie clip (Successive Recording) This camera allows you to temporarily stop during unwanted scenes, while recording a movie clip. Using this function, you can record your favourite scenes into a movie clip without having to create multiple movie clips. ƈ How to use the ASR (Advanced Shake Reduction) mode ( ) This mode will reduce the effect of camera shake and help you get a wellexposed image in dim conditions. Press the ASR button.
Starting the recording mode ƈ Wise Shot Two images are taken at a time. One is taken in the Fill-In Flash mode and the other is taken in the ASR mode. You can select and save only one of the images. ƃ How to use the Wise Shot 1. Select the ASR mode by pressing the mode button. 2. Press the Fn button. (p.30) 3. Select the ( ) menu. 4. Press the Shutter button to capture images - Two images are captured in succession.
Starting the recording mode ƈ Face recognition This mode detects the face position of the subject automatically and then sets the focus and exposure. Select this mode for quick and easy pictures of people. Selectable modes : Auto, Program, ASR, Portrait, Children, Beach&Snow, Self shot, Cafe mode. 1. Press the FR (Face Recognition) button ( ) in the selectable modes. The FR icon will be displayed on the screen left top side. 2.
Things to watch out for when taking pictures ƈ The available recording time may vary depending on shooting conditions and camera settings. ƈ When the Flash Off or Slow synchro mode is selected in a low lighting condition, the camera shake warning indicator ( ) may appear on the LCD monitor. In this case, use a tripod, support the camera on a solid surface or change to flash shot mode. ƈ Shooting against the light : Do not take pictures into the sun.
Using the camera buttons to set the camera ƈ The recording mode function can be set up by using the camera buttons. POWER button ƃ Used for turning the camera’s power on / off. ƃ If there is no operation during the specified time, the camera's power will be turned off automatically to save battery life. Refer to page 81 for more information about the auto power off function. SHUTTER button ƃ Used for taking an image or recording voice in the RECORDING mode.
ZOOM W / T button ƃ This camera has a 3X optical zoom and a 5X digital zoom function. Using both will offer a total zoom ratio of 15X. ƃ TELE Zoom Optical zoom TELE Digital zoom TELE ƃ WIDE Zoom Optical zoom WIDE : Pressing the ZOOM T button. This will zoom into the subject i.e. the subject will appear nearer. : When the maximum (3X) optical zoom is selected, pressing the ZOOM T button activates the digital zoom software. Releasing ZOOM T button stops the digital zooming at the required setting.
ZOOM W / T button INFORMATION ƃ Images taken using the digital zoom may take a little longer for the camera to process. Allow time for this to take place. ƃ You may notice a decrease in image quality when using the digital zoom. ƃ To view a clearer digital zoom image, press the shutter button halfway at the maximum optical zoom position and press the zoom T button again.
Macro ( ƌ) button ) / Down (ƌ ƈ While the menu is showing, the DOWN button operates as a direction button. When the menu is not showing, you can use the MACRO / DOWN button to take macro pictures. The distance ranges are shown below. Press the Macro button until the desired macro mode indicator displays on the LCD monitor.
Macro ( ƌ) button ) / Down (ƌ ƈ Available focusing method, by recording mode (ƃ: Selectable, ū: Infinity focus range) Mode Auto macro ƃ Super macro Macro Normal ƃ ƃ ƃ ƃ ƃ ƃ ƃ Mode Auto macro ƃ ƃ SCENE Super macro Macro Ȝ) button ) / Left (Ȝ Flash ( Normal ƃ ƃ ƃ ū ƈ When the menu is displayed on the LCD monitor, pressing the LEFT button makes the cursor shift to the left tab. ƈ When the menu is not displayed on the LCD monitor, the LEFT button operates as the FLASH button.
Flash ( Ȝ) button ) / Left (Ȝ INFORMATION ƃ If you press the shutter button after selecting the Auto, Fill-in, Slow synchro flash, the first flash fires to check the shooting condition (Flash range and Power ratio of flash). Do not move the camera until the second flash fires. ƃ Using the flash frequently will reduce the life of the battery. ƃ Under normal operating conditions the re-charging time for the flash is usually within 5 seconds. If the battery is weak, the charging time will be longer.
Flash ( Ȝ) button ) / Left (Ȝ Self-timer ( ƃ Available flash mode, by recording mode (ƃ: Selectable) ƃ ƃ ƃ ƃ ƃ ƃ ƃ ƃ ƃ ƃ ƃ Ȟ) button ) / Right (Ȟ ƈ When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor shift to the right tab. The right button can also be used to move to a sub menu to select a different setting. When the menu is not displayed on the LCD monitor, the RIGHT button operates as the Self-timer.
M (Mode) button Fn button ƈ Image Size : You can select the image size appropriate for your application. ƈ You can select the desired working mode using the M (Mode) button located on the back of the camera Refer to page 16 for selecting camera modes. Image Size 3072x2304 2592x1944 2048x1536 1024x768 3072x2048 3072x1782 2560x1440 1280x720 640x480 320x240 Still Image Fn button Print ƈ You can select Image size, Quality, Metering, Drive modes, ISO, White Balance and Exposure Compensation.
Fn button ƈ Quality / Frame rate : You can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality. Mode STILL IMAGE mode MOVIE CLIP mode Icon Sub menu Super Fine Fine Normal 30FPS 15FPS File Format jpeg jpeg jpeg avi avi QUALITY FRAME RATE [STILL IMAGE mode] [MOVIE CLIP mode] INFORMATION ƃ This file format complies with the DCF (Design rule for Camera File system).
Fn button ƈ Metering : If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures. - Multi : Exposure will be calculated based on an average of the available light in the image area. However, the calculation will be biased towards the centre of the image area. This is suitable for general METERING use. - Spot : Only the rectangular area in the centre of the LCD monitor will be metered for light.
Fn button ƈ White balance : The white balance control allows you to adjust the colours to appear more natural. Auto WB : The camera automatically selects the appropriate white balance settings, depending on the prevailing lighting conditions. WHITE BALANCE Daylight : For taking images outside. Cloudy : For taking images under a cloudy and overcast sky. Fluorescent_H : For shooting under daylight fluorescent types of three-way fluorescent lighting. Fluorescent_L : Shooting under white fluorescent lighting.
Fn button E (Effect) button ƈ Exposure compensation : This camera automatically adjusts the exposure according to the ambient lighting conditions. If you change the exposure value, the exposure indicator ( ) will be displayed on the bottom EXPOSURE VALUE of the LCD monitor. A negative exposure compensation value reduces the exposure. Note that a positive exposure compensation value increases the exposure and the LCD monitor will appear white or you may not get good pictures.
E (Effect) button : Colour ƈ By using the cameraŖs digital processor, it is possible to add special effects to your images ƃ Press the E button in an available recording mode. (p.33) ƈ Custom colour : You can change the R (Red), G (Green) and B (Blue) values of the image.
E (Effect) button : Special Colour Colour mask ƈ With this menu, you can select a part you want to highlight. The rest of the image will be black and white. ƃ Press the E button in an available recording mode. (p.33) COLOR MASK E Back OK Set Press the OK button and the Mask mark will be displayed on the LCD monitor. SH Capture Fn Edit Press the Fn button. You can change the size and location of the mask.
E (Effect) button : Image editing Saturation ƈ You can change the saturation of the image. ƃ Press the E button in an available recording mode. (p.33) Saturation IMAGE ADJUST Move E Exit Select Saturation menu ( ) and a bar for changing the saturation will be displayed. Move Change the saturation by pressing the ȜȞ button.
E (Effect) button : Fun Preset focus frames ƈ You can make the subject stand out from its surroundings. The subject will be sharp and in focus while making the rest out of focus. ƃ Moving and changing the focus frame You can change the focus frame after selecting a Range menu. ƃ Press the E button in an available recording mode. (p.33) Pressing the Fn button SH Capture High Light FUN Fn Edit SH Capture [Point the camera towards the subject and compose the image by using the LCD monitor.
E (Effect) button : Fun ſ Selecting 2 composite shots Composite shooting ƈ You can combine 2 - 4 different shots in a still image. Pressing the shutter button ƃ Press the E button in an available recording mode. (p.33) SH Capture Fun FUN Composite SH Capture [Ready for taking] Fn Delete [First shot] Pressing the shutter button Move E Exit Composite OK Set Select a desired menu by pressing ȜȞ button and press the OK button. : 2 different shots are combined in a still image.
E (Effect) button : Fun 1. During the composite shots, press the Fn button. 2. A previous image will be deleted and new frame will display. If there is an image taken before, press the Fn button again and a previous image will be deleted again. ƃ Changing a part of composite shot after taking the last shot 1. After taking the last shot, a cursor to select a frame will display. Press the Ɗƌ ȜȞ button to select the frame. 2. Press the Fn button and an image will be deleted.
E (Effect) button : Fun Photo Frame ƈ You can add 8 types of frame-like borders to a still image you want to capture. ƈ Date & Time information will not be printed on the stored image taken with Photo Frame menu. ƃ Press the E button in an available recording mode. (p.33) Fun Photo Frame FUN The selected photo frame will display. Press the shutter button to take a picture.
Using the LCD monitor to adjust the camera settings MENU / OK button ƈ MENU button - When you press the MENU button, a menu related to each camera mode will be displayed on the LCD monitor. Pressing it again will return the LCD to the initial display. - A menu option can be displayed when the following are selected : MOVIE CLIP and STILL IMAGE mode. There is no menu available when the VOICE RECORDING mode is selected.
Sharpness Auto Focus type ƈ You can adjust the sharpness of the picture you are about to take. You cannot check the sharpness effect on the LCD monitor before you take a picture, because this function is applied only when the captured image is stored on the memory. Icon Soft Normal Vivid Vivid+ Back Soft+ Soft Normal Vivid Vivid+ OK Set ƈ You can select your preferred Auto Focus type according to the shooting condition.
Voice Memo ƈ You can add your voice-over to a stored still image. (Min. 2 sec. - Max. 10 sec.) Voice Recording RECORDING Sharpness Contrast Auto Focus Voice Memo Voice Record Back ƈ A voice can be recorded for as long as the available recording time (Min. 2 sec. Max. 10 hour) allows. Off On OK Set - If the voice memo indicator is displayed on the LCD monitor, the setting is completed. - Press the shutter button and take a picture. The picture is stored on the memory card.
Voice Recording Recording the movie clip without voice ƃ Pausing while recording a voice Using this function, you can record your favourite voice clips into a voice recording file without having to create multiple voice recording files. 1. Press the Pause button ( ) to pause recording. 2. Press the Pause button ( ) again to resume the recording. 3. If you wish to stop recording, press the shutter button again. ƈ You can record the movie without voice.
Starting play mode ƈ Turn the camera on and select Play mode by pressing the play mode button ( ). The camera can now play back the images stored in the memory. ƈ If the memory card is inserted in the camera, all the camera functions apply only to the memory card. ƈ If the memory card is not inserted in the camera, all the camera functions apply only to the internal memory. ƃ Playing back a still image 1. Select the PLAY mode by pressing the play mode button ( ). 2.
Starting play mode ƈ Movie clip capture function : capture still images from the movie clip. ƈ On camera movie trimming : You can extract desired frames of movie clip during the movie clip play back. ƃ How to capture the movie clip 1. Press the Play / Pause button while playing the movie clip. Then press the E button. 2. The paused movie clip is saved in a new file name. ƃ If the running time is under 10 seconds, the movie clip can’t be trimmed. 1.
Starting play mode ƃ Playing back a recorded voice 1. Select the recorded voice that you want to play back by using the ȜȞ button. 2. Press the play & pause button ( ) to play back a recorded voice file. - To pause a recorded voice file, while playing it Play back, press the play & pause button again. - To resume playback of the voice file, press the play & pause button - To rewind the voice file while it is playing, press the Ȝ button. To fast forward the voice file, press the Ȟ button.
LCD monitor Indicator Using the camera buttons to adjust the camera ƈ The LCD monitor displays shooting information about the displayed image. ڼ ڻ ں ƈ In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions. ڹ Play mode button ڽ ھ ISO AV TV FLASH SIZE DATE ڿ No.
Thumbnail ( ) / Enlargement ( ) button / Volume button ( ) ƈ You can view multiple pictures, enlarge a selected picture, and crop and save a selected area of an image. ƈ In the MP3, PMP and Text Viewer mode, you can control the volume of multimedia files. ƃ Thumbnail display 1. While an image is displayed full screen, press the thumbnail button. 2. The thumbnail display will highlight the image that had been showing at the time the thumbnail mode was selected. 3.
Thumbnail ( ) / Enlargement ( ) button / Volume button ( ) ƃ Trimming : You can extract part of the image and save it separately. 1. Select an image that you want to enlarge and press the enlargement button. Trimming? 2. Different parts of the image can be viewed by No Yes pressing the ƊƌȜȞ button. 3. Press the MENU button and a message will be OK Confirm displayed as shown alongside. 4. Select a desired sub menu by pressing the Ɗƌ button and press the OK button.
Play & Pause ( ƌ) button ) / Down (ƌ ƈ In Play mode, the play & pause / down (ƌ) button works as follows : - If the menu is displayed Press the DOWN button to move from the main menu to a sub menu, or to move down the sub menu cursor. - If a still image with a voice memo, a voice file, or a movie clip is playing In Stop mode : Plays a still image with a voice memo, a voice file, or a movie clip. During playback : Temporarily stops playback. In Pause mode : Resumes playback.
Delete ( ) button Special Effect (E button) : Resize ƈ This deletes images stored on the memory card. 1. Select an image that you want to delete by pressing the ȜȞ button and press the DELETE ( ) button. Delete? Delete? No Yes No Yes OK Confirm ƈ Change the resolution (size) of pictures taken. Select [Start image], [MP3 Skin] to save an image to be the start-up image, MP3 Skin. 1. Press the play mode button and press the E button. 2. Press the ȜȞ button and select the [RESIZE] ( ) menu tab. 3.
Special Effect (E button) : Rotating an image Special Effect (E button) : Resize ƃ A large sized image can be resized to a smaller sized image, but not vice versa. ƃ Only JPEG images can be resized. Movie clip (AVI), Voice recording (WAV) files can’t be resized. ƃ You can change the resolution of only those files compressed in the JPEG 4:2:2 format. ƃ The resized image will have a new file name. The [User Image] image is stored not on the memory card but on the internal memory.
Special Effect (E button) : Colour ƈ It is possible to add special effects to your images by using this button. 1. Press the play mode button and press the E button. 2. Select menu tab by pressing the ȜȞ button. ƈ Custom colour : You can change the R (Red), G (Green) and B (Blue) values of the image. COLOR Move Move E Exit [Still image] 3. Select a desired sub menu by pressing the Ɗƌ button and press the OK button. : Captured images will be stored in black and white.
Special Effect (E button) : Special Colour Colour mask ƃ With this menu, you can select a part you want to highlight. The rest of the image will be in black and white. SPECIAL COLOR Move Color Mask Select and a mark for selecting part will display. E Exit Press the OK button and you can set the size and location of the part. E Back OK Set Move OK Set T/W Size W / T button : Changing size of part Move Press the OK button twice and the colour mask image will be saved as a new file name.
Special Effect (E button) : Image editing ƃ Saturation control : You can change the saturation of the image. 1. Press the play back button and press the E button. 2. Select menu tab by pressing the ȜȞ button. ƃ Red eye Removal : Red eye effect can be removed from the captured image. 1. Select ( ) by pressing the Ɗƌ button and Red Eye Fix [Processing!] message will dbe displayed. 2. The red eye will be removed. Press the OK button and the image will be saved as a new file name.
Special Effect (E button) : FUN Cartoon ƈ You can add a text box on the image to make the image as a cartoon ſ You can select the size of Cartoon image. 1M, 1MP, 1MW are available. Select a desired position by pressing the ƊƌȜȞ button and press the OK button. Cartoon FUN Select Cartoon ( Move OK Set E E ) E Back Exit Back Pressing the OK button You can input texts by pressing the ƌ button (p.64). Press the OK button twice.
Special Effect (E button) : FUN ƃ Before saving the cartoon image, you can change the selected image. 1. Pressing the Fn button deletes the images in order. 2. Press the OK button and you can select images. ƃ Inserting texts on the text box You can insert texts on the text box. Input Message d Pressing the Fn button OK Search Fn Delete Balloon OK Search OK Set Text Press the ƌ button and a window for inserting texts will display 00/52 Byte abc def ghi jkl mno pqr stu vwx .
Special Effect (E button) : FUN ƃ Moving and changing the focus frame You can change the focus frame after selecting a Range menu. Preset focus frames ƈ You can make the subject stand out from its surroundings. The subject will be sharp and in focus while making the rest out of focus. 1. Select a focus frame by pressing the ȜȞ button and press the OK button. 2. Move the location of the frame by pressing the ƊƌȜȞ button. 3. Press the OK button and the file is saved as a new file name.
Special Effect (E button) : FUN ſ Selecting 2 composite shots Composite image ƈ You can combine 2 - 4 different shots in a still image. Pressing the ƊƌȜȞ button Composite FUN Move OK Set Move OK Set [Changing the position] Move E Exit Composite OK Set Pressing the OK button Press the OK button.
Special Effect (E button) : FUN ƃ Before selecting the last composite image, you can change a part of composite image. 1. During the composite image editing, press the Fn button. 2. A previous image will be deleted. Press the OK button and you can select a new image. After selecting an image, press the Fn button again and the image will be deleted again. Photo Frame ƈ You can add 8 types of frame-like borders to a still image you want to capture.
Special Effect (E button) : FUN Sticker ƈ You can add various stickers to the image. FUN Sticker Select ( Move E ) Sticker Exit Select a desired sticker by pressing the ȜȞ button and press the OK button Press the OK button and the image is saved. Move OK Save Fn Add Select a location of sticker by pressing the ƊƌȜȞ button ſ You can add additional stickers by pressing the Fn button. Press the OK button to store the image.
Special Effect (E button) : FUN Text Typing ƈ You can input text on to a saved image. Text Typing FUN Select ( Move E ) Style Exit Select a desired frame by pressing the ȜȞ button and press the OK button. OK Set Back E OK Set Press the OK button and a window for inserting texts will be displayed. Input Message Input Message d camera d camera Fn Edit OK Set Press the the FR button ( ) and ƌ (OK) button. Texts inserted before will be displayed.
Text Typing ƈ You can input texts in Cartoon of Fun menu. ƃ How to input the texts After selecting the Text typing menu, a window for inputting text will be displayed. You can select Korean, English, Capital letter / Small letter, Number and symbols by pressing the FR ( ) button. Input Message d 00/52 Byte abc def ghi jkl mno pqr stu vwx .
Setting up the play back function using the LCD monitor ƈ PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as follows. To capture an image after setting up the play menu, press the PLAY mode button or shutter button. Menu tab Main menu Show Start Select Album Sub menu Secondary menu Page Play / Repeat Play - p.
Setting up the play back function using the LCD monitor Menu tab Main menu Layout Type Quality Date File Name Reset Sub menu Auto Full 1 2 4 8 9 16 Index Auto Plain Photo FastPhoto Auto Draft Normal Fine Auto Off On Auto Off On No Yes ſ Menus are subject to change without prior notice. ŝ66Ş Secondary menu - Page Slide Show ( ) ƈ Images can be displayed continuously at pre-set intervals. You can view the slide show by connecting the camera to an external monitor. 1.
Slide Show ( ) ƃ Selecting Album : You can playback a selected album. - [All, Myself, Family, Friend, Event, Secret] : The selected album is played back. ƃ Effect : Unique screen effects can be used for the slide show. SLIDE SHOW Show Start Select Album Interval Effect Music Back All My Self Family Friend Event Secret OK Set - [Off] : Normal display. - [Effect1] : Image moves from the top left. - [Effect2] : Image is displayed slowly from the centre outwards.
Album ( ) ƃ Adding images in an album Press the Album menu button. - Press the OK button View ƈ Album mode : Images play back by album. [All] : All images saved in the memory ALBUM play back. View Edit [Myself] : Images saved in the Personal album play back. [Family] : Images saved in the Family album Back play back. [Friend] : Images saved in the Friends album play back. [Event] : Images saved in the Events album play back. [Secret] : Images saved in the Secret album play back.
) 3. Press the OK button and a window for inserting new password will be displayed. Password setup ƃ Inserting the password : when the secret album is selected, password must be inserted. - Select the secret album and press the OK button. A window for inserting password will be displayed. Enter Four Digit Password d Delete Delete Cancel - Insert the password and images on the secret album will be played back. The default password is "0000". 4. Insert a new password and press the OK button.
Voice memo ( ) Deleting images ƈ You can add your voice to a stored still image. (Min. 2 sec. - Max. 10 sec.) 1. Press the ȜȞ button to select an image that you want to insert the voice memo. PLAYBACK Voice Memo Delete Protect DPOF Copy To Card ಒൂ Back Off On Ⴤ OK Set [Voice memo menu] 2. Select the voice memo menu and the voice memo indicator will display. The camera is now ready to record a voice memo. Shutter:Start [Ready for recording] 3.
Protecting images DPOF ƈ This is used to protect specific shots from being accidentally erased (Lock). It also unprotects images that have been previously protected (Unlock). ƈ DPOF (Digital Print Order Format) allows you to embed printing information on your memory card’s MISC folder. Select the pictures to be printed and how many prints to make. ƃ Protecting Images 1. Select a desired sub menu by pressing the Ɗƌ button and press the OK button.
DPOF : STANDARD DPOF : Index ƈ This function allows you to embed print quantity information on a stored image. 1. Select the [Standard] menu by pressing the Ɗƌ button and press the Ȟ button. 2. Select a desired sub menu by pressing the Ɗƌ button. [Select] : Selection window for an image to print is displayed. - ƊƌȜȞ button : Select an image to print. - Zoom W / T button : Select the number of prints. [All] : Configure number of prints for all pictures except movie and voice files.
DPOF : Print size Copy To Card ƈ You can specify the print size when printing images stored on the memory card. The [Size] menu is available only for DPOF 1.1 compatible printers. ƈ This enables you to copy image files, movie clips and voice recording files on the camera's built-in internal memory to the camera's removable SD memory card. ƃ Setting the Print Size 1. Select the [Size] menu by pressing the Ɗƌ button and press the Ȟ button. 2.
PictBridge ƈ You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. Movie clips and voice files cannot be printed. ſ If the [USB] menu is set to the [Computer], you cannot connect a Pictbridge compatible printer to the camera through USB cable with [Connecting Computer] message. In this case, remove the cable and do the step 1, 2 again. ƃ Setting up the camera for connection to the printer 1.
PictBridge : Picture Selection ƈ You can select images you want to print PictBridge : Print Setting ƈ You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and File Name Print menus for printed pictures. ƃ Setting the Number of Copies to Print 1. Press the Menu button and the PictBridge PICTBRIDGE menu will display. Images One Pic Size All Pics 2. Use the Ɗƌ buttons to select the [Images] Layout menu and press the Ȟ button. Type Quality 3.
PictBridge : Reset Sound menu ƈ Initialises user-changed configurations. 1. Use the Ɗƌ buttons to select the [Reset] menu tab. And then press the Ȟ button. 2. Use the Ɗƌ buttons to select the desired sub menu value, and then press the OK button. - If [No] is selected : Settings will not be reset. - If [Yes] is selected : All print and image settings will be reset. PICTBRIDGE Layout Type Quality Date File Name Reset Back ƈ In this mode, you can set up sound settings.
Sound ( ) [ Volume ] ƈ You can set select a volume of sound, start up sound, shutter sound, warning sound and AF sound. ƃ [Volume] sub menu : [Off], [Low], [Medium], [High] [ Beep Sound ] SOUND Volume Start Sound Shutter Sound Beep Sound AF Sound Back Off Low Medium High ƈ If you set sound to ON, various sounds will be activated for camera startup, when buttons are pressed, so that you can be aware of the camera operation status.
Setup menu ƈ In this mode, you can set up basic settings. You can use the setup menu in all camera modes, except Voice Recording mode. The items indicated by are default settings. Menu tab Sub menu Main menu File Series Reset ENGLISH DEUTSCH LANGUAGE Page ESPAÑOL LCD AF Lamp Start Image ŝ78Ş p.81 Power Off 1, 3, 5, 10 min - p.81 LCD Save Off On p.81 Video Out NTSC PAL p.82 - Format No Yes p.83 Reset No Yes p.83 SVENSKA SUOMI p.79 Magyar - Imprint Page 0.
Setup menu 1 ( ) [ File name ] [ LANGUAGE ] ƈ This function allows the user to select the file naming format. ƈ There is a choice of languages that can be displayed on the LCD monitor.Even if the battery is removed and inserted again, the language setting will be preserved. [Series] : New files are named using numbers that SETUP1 follow the previous sequence, even File LANGUAGE when a new memory card is used, or Date&Time Imprint after formatting, or after deleting all LCD pictures.
Setup menu 1 ( ) [ Imprinting the recording date ] [ Auto Focus lamp ] ƈ There is an option to include DATE / TIME on still images. ƈ You can turn on and off the Auto Focus lamp. ƃ Sub menus [Off] : The DATE & TIME will not be imprinted on the image file. [Date] : Only the DATE will be imprinted on the image file. [Date&Time] : The DATE & TIME will be imprinted on the image file. ƃ Sub menus [Off] : The AF lamp will not light up in a low light condition.
Setup menu 2 ( ) [ Quick view ] [ LCD save ] ƈ If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Quick View] setup. Quick view is possible only with still images. ƈ If you set the [LCD save] to On and the camera isn't operated during the specified time, the LCD monitor will be turned off automatically. ƃ Sub menus [Off] : The quick view function can’t be activated. [0.
Setup menu 2 ( ) [ Selecting Video out type ] - NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico. ƈ The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI.
Setup menu 2 ( ) [ Password setup ] ƈ You can set the password on the secret album. (p.69) [ Initialisation ] SETUP2 Quick View Power Off LCD Save Video Out Set Password Format Move ƈ All camera menu and function settings will be restored to their default values. However, values for DATE / TIME, LANGUAGE, and VIDEO OUT will not be changed. 0.5 sec 3 min Off NTSC ƃ Sub menus [No] : Settings will not be restored to their defaults. [Yes] : All settings will be restored to their defaults.
MP3 / PMP / TEXT VIEWER Mode ƈ This camera has an embedded MP3, TEXT VIEWER & Portable Media Player program. You can take a picture, listen to the MP3 files and watch the movie clip (Movie and Video clip) whenever you want. To use the PMP mode, you must convert the multimedia file with the Digimax Converter. In the TEXT VIEWER mode you can see the text on the LCD monitor with listening MP3 music. ƈ If the file name is over 255 (Including 2 Byte language like Korean, Chinese, etc.
MP3 / PMP / TEXT VIEWER Mode INFORMATION ƃ Take care of the illegal duplication of MP3 & multimedia files. It violates various copyright laws. ƃ This camera can only play back MP3 files in the MP3 mode and SDC files (modified XviD MPEG4 video / MPEG Layer2 audio type) in the PMP mode. ƃ If a file can not be played back on this camera, convert it into the supported file format by using the Digimax Converter. (p.108) ƃ Up to 900 files and 100 sub folder can be saved in a folder.
Starting the MP3 / PMP / TEXT VIEWER mode [MP3 mode] INFORMATION 03-Audio Track 03.mp3 01-Audio Track 01.mp3 Move OK Select [PMP mode] [SDC]-move sample.sdc Who bent my camera? Move OK Select [TEXT VIEWER mode] TEST.TXT TEST.TXT Thank you for buying a Samsung Camera. This manual will guide you through using the camera, includin capturing images, downloading images and using the application software. Please read this manual carefully before using your new camera.
LCD monitor indicator for MP3 / PMP / TEXT VIEWER mode ƈ The LCD monitor displays information about the MP3, multimedia and Text file. Indication of present TEXT MP3 mode Battery (p.11) TEXT VIEWER mode Current page / Whole page TEST.TXT Battery (p.11) Lock (p.89) Mute (p.88) Equalizer (p.89) Encoding Type (ANSI, Uni) Thank you for buying a Samsung Camera. Playing time Search speed (p.88) Bit rate (p.86) Playback mode (p.91) Title of file Play & Pause / Control button (p.88) Volume (p.
Using the camera buttons to adjust the camera Volume button ƈ You can control the volume with this button. There are 0 ~ 30 steps. - Mute ( ) : You can mute the MP3 sound with the Up button. Delete button ƈ This deletes files stored on the memory. 1. Select a desired file to delete on the browsing menu and press the Delete button. 2. A message will appear as shown [No] : cancels "Delete files" and the browsing menu will display. [Yes] : deletes the selected file.
Using the camera buttons to adjust the camera Hold / Equalizer button ƃ If you press the Hold button for over 1 second, the camera buttons are locked. - If the camera buttons are locked, the buttons can't be operated while playing back. But Power off, Video out, USB connection and LCD on functions can be operated. Playlist button ƃ While a multimedia file is playing back, you can select a desired file by using the browsing menu. 1. While a multimedia file is playing back, press the Playlist button ( 2.
Setting up the playback function using the LCD monitor ƈ MP3 / PMP / Text Viewer mode functions can be changed by using the LCD monitor. Press the MENU button and the menu will display on the LCD monitor. Menu tab Main menu Resume Play Mode MP3 MP3 Skin Show Play Show Interval Delete All Resume Seeking PMP Player Display Delete All ŝ90Ş Page Sub menu Off On Play All Repeat One Repeat All Random Random Repeat - Default 1 Default 2 User Skin 1 User Skin 2 Menu tab p.91 Resume p.
Setting up the playback function using the LCD monitor Resume Play mode ƈ You can set the playback type. 1. Press the Menu button in each mode. 2. Select a desired playing type in the [Resume] menu by pressing the Ɗƌ button and pressing the OK button. Resume Off On Move Resume Off On MENU Exit [MP3 mode] Move Resume Off On MENU Exit [PMP Mode] Move MENU ƈ You can set various repeat and shuffle options. Play Mode This function is adopted only in the selected folder.
Setting up the playback function using the LCD monitor Playing back the slide show ƈ While the MP3 file is playing back, captured images are displayed on the LCD monitor continuously. Delete all ƈ All files stored on the memory card will be deleted. In the MP3 mode, only MP3 files are deleted. In the PMP mode, only multimedia files are deleted. In the TEXT VIEWER mode, TEXT files are deleted. Show Start Play Repeat Play [Play] : Display the images once. [Repeat Play] : Display the images continuously.
Setting up the playback function using the LCD monitor Display setting ƈ You can set the play back function display on the LCD. [5 sec] : If there is no operation during 5 seconds, Menu bar will disappear. [On] : Menu bar will appear on the LCD monitor. [Off] : Menu bar will not appear on the LCD monitor. Setting up the recording function in the MP3 mode PLAYER DISPLAY 5 sec On [MK Off Move MENU Exit ƈ You can take a picture and listen to the MP3 files at the same time 1.
Setting up the playback function using the LCD monitor Be sure to observe the following precautions! MP3 BGM Setting ƈ You can play MP3 files when you are playing the text. [Off] : You cannot play the MP3 files. [On] : When you are playing the text, you can play the MP3 files. ſ The last played MP3 files will be executed. Important notes MP3 BGM Off On Move MENU Exit ƈ This unit contains precision electronic components. Do not use or store this unit in the following locations.
Important notes ƈ Extremes in temperature may cause problems. - If the camera is transferred from a cold to a warm and humid environment, condensation can form on the delicate electronic circuitry. If this occurs, turn the camera off and wait for at least 1 hour until all moisture is dispersed. Moisture build up can also occur in the memory card. If this happens, turn off the camera and remove the memory card. Wait until the moisture has dispersed.
Warning indicator ƈ There are several warnings that may appear on the LCD display Card Error! ϛMemory card error ƍ Turn off the camera power and turn it on again ƍ Insert the memory card again ƍ Insert the memory card and format the memory card (p.
Before contacting a service centre Battery power quickly drains ϛThe Camera is being used in low temperatures ƍ Keep the camera in warm conditions (i.e. inside a coat or jacket) and only remove it in order to take images Camera does not take images when the Shutter button is pressed ϛThere is insufficient memory capacity ƍ Delete unnecessary image files ϛThe memory card has not been formatted ƍ Format the memory card (p.
Before contacting a service centre No image on external monitor ϛThe external monitor has not been connected properly with the camera ƍ Check the connection cables ϛThere are incorrect files in the memory card ƍ Insert a memory card that has correct files When using the PC’s explorer, the Removable Disk (SAMSUNG) file does not show ϛCable connection is incorrect ƍ Check the connection ϛThe camera is off ƍ Turn the camera on ϛThe operating system is not Windows 98SE, 2000, ME, XP, Vista / Mac OS 10.1 ~ 10.4.
Specification Image Editing - Resize, Rotate Colour : B&W, Sepia, Red, Green, Blue, Negative, Custom Colour Special Colour : Colour Filter, Colour Mask Image Adjustment : Red eye reduction, Brightness, Contrast, Saturation, Noise Effect FUN : Cartoon, Preset Focus Frame, Composite, Photo Frame, Sticker, Text typing Storage - Capacity (MMC 512MB) White Balance Auto, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten, Custom Voice Recording Voice Recording (Min. 2 sec - Max.
Specification Weight Software 161.
Software Notes About the software Please ensure that you read the software instructions carefully before use. ŋThe attached software is a camera driver and image editing software tool for Windows. ŋUnder no circumstances should all or part of either the software or the user manual be reproduced. ŋCopyrights for software are licensed only for use with a camera. ŋIn the unlikely event of a manufacturing fault, we will repair or exchange your camera.
About the software ƈ Digimax Master : This is the all-in-one multi media software solution. You can download, view, edit and save your digital images and movie clips with this software. This software is only compatible with Windows. Setting up the application software ƈ To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program.
Setting up the application software 3. Install the software by instructions on the monitor. 4. To play back the movie clip recorded with this camera on the computer, install the XviD codec.
Setting up the application software ſ The XviD codec is distributed according to and under the terms and conditions of the GNU General Public License and everyone can copy, modifiy and distribute this codec freely, but WITHOUT ANY WARRANTY, IMPLIED OR EXPRESSED, OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE; provided, however, that you have to follow the GNU General Public License whenever you are distributing this codec or modification thereof.
Starting PC mode ƈ Disconnecting the camera and PC : Refer to "Removable Disk" (p.106) 3. Select an image and press the right mouse button. INFORMATION ƃ Before inserting any cables or AC adapter, check the directions and do not insert by force. It may cause breakage of cable or camera. 4. A pop-up menu will open. Click the [Cut] or [Copy] menu. - [Cut] : cuts a selected file. - [Copy] : copies files.
Removable Disk CAUTION ƃ We recommend that you should copy the images to the PC to view them. Opening images directly from the removable disk may be subject to unexpected disconnection. ƃ When you upload a file that is not taken by this camera to the Removable Disk, the [File Error!] message will be displayed on the LCD monitor in the PLAY mode, and nothing is displayed in THUMBNAIL mode. Removing the removable disk 2. Double-click the [Unplug or Eject Hardware] icon on the task bar. [Double Click!] 3.
Setting up the USB Driver for MAC 1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver. 2. Check the MAC OS version during start-up. This camera is compatible with MAC OS 10.1 ~ 10.4. 3. Connect the camera to the Macintosh and turn the camera power on. 4. A new icon will be displayed on the desktop after connecting the camera to the MAC. Removing the USB Driver for Windows 98SE ƈ To uninstall the USB driver, refer to the process shown below. 1.
Digimax Converter ƈ Multimedia (Movie, Video clip, etc) files can be converted into movie clips that can be played back on this camera. This software is only compatible with Windows. ƈ How to use the Digimax Converter 1. Double click the Digimax Converter icon ( ) on the desktop. 2. Click the Add icon ( ) and select a file that you want to add. 3. If you want to add a caption, check "Use subtitles from file (*.smi)". 4. Select settings that you want and click the Convert button.
Digimax Converter INFORMATION - If you installed various multi-codecs on your computer, it may cause converting problems. In this case, remove all codecs and install a proper multi-codec. - Install a latest Windows Media Player. - Visit device (PC, Graphic card, Sound card) manufacturer web-site and upgrade them with the latest version. ƃ Some kinds of multimedia files are not converted. If the converted media files are damaged, they may not play back on the camera.
Digimax Master 4. Select a destination and make a new folder in which to save downloaded images and folders. - Folder names can be made in order of date and images will be downloaded. - Folder name will be made as you want and images will be downloaded. - After selecting a folder that was made before, images will be downloaded. 5. Click [Next >] button. ƃ Image viewer : You can view the stored images. ڹ ڽ ھ ڿ ں ڻ ڼ 6. A window will open as shown alongside.
Digimax Master ƃ Image edit : You can edit the still image. ڹ ƃ Movie edit : You can get the still image, movie clip, narration, music files together in a movie clip. ڼ ڹ ں ں ڻ - Image edit functions are listed below. ڹEdit menu : You can select the following menus. [Tools] : You can resize or crop the selected image. See the [Help] menu. [Adjust] : You can modify image quality. See the [Help] menu. [Retouch] : You can change the image or add effects to the image. See the [Help] menu.
FAQ ƈ Please check the following if the USB connection malfunctions. Case 1 The USB cable is not connected or you are using a cable with an incorrect specification. ƍ Use a USB cable with the correct specification. Case 2 The camera is not recognized by your PC. Sometimes, the camera may appear under [Unknown Devices] in Device Manager. ƍ Install the camera driver correctly. Turn off the camera, remove the USB cable, plug in the USB cable again, and then turn on the camera.
FAQ ƈ When the movie clip doesn’t play back on the PC ſ When the movie clip recorded by the camera doesn’t play back on the PC, the causes are mostly due to the codec installed on the PC. ƃ When codec for play back the movie clip isn’t installed ƍ Install the codec as listed below. [Installing codec for Windows] 1. Installing the XviD codec 1) Insert the CD provided with the camera. 2) Run the windows explorer and select [CD-ROM drive:\XviD] folder and click the XviD-1.1.2-01112006.exe file.
Correct Disposal of This Product Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
MEMO MEMO ŝ115Ş
MEMO ŝ116Ş MEMO
SAMSUNG TECHWIN CO., LTD. SAMSUNG FRANCE S.A.S. SAMSUNG OPTO-ELECTRONICS UK LIMITED OPTICS & DIGITAL IMAGING DIVISION 145-3, SANGDAEWON 1-DONG, JUNGWONGU, SUNGNAM-CITY, KYUNGKI-DO, KOREA 462-121 TEL : (82) 31-740-8086, 8088, 8090, 8092, 8099 FAX : (82) 31-740-8398 www.samsungcamera.com BP 51 TOUR MAINE MONTPARNASSE 33, AV .DU MAINE 75755, PARIS CEDEX 15, FRANCE HOTLINE PHOTO NUMÉRIQUE : 00 800 22 26 37 27(Numéro Vert-Appel Gratuit) TEL : (33) 1-4279-2200 FAX : (33) 1-4320-4510 www.samsungphoto.
