Owner's Manual

07 CONNECTING A MOBILE DEVICE
Connecting via Bluetooth
When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of
cabling .
• The connection is limited to one TV or two Bluetooth devices at the s ame time.
D
OR
Bluetooth device
The initial connection
1. Press the t PAIR button on the remote control to enter the " BT PAIRING " mode .
(OR) a. Press the cgj] (Source) button on the top panel and then select " BT ".
" BT " changes to " BT PAIRING " in a few seconds automatically or changes to " BT READY " if
there is a connect record.
b. When " BT READY " appears, press and hold the cgj] (Source) button on the top panel of the
Soundbar for more than 5 seconds to display " BT PAIRING ".
2. On your device, select " [AV] Samsung Sound bar Q6T - Series " from the list that appears .
• When the Sound bar is connected to the Bluetooth device, [ Bluetooth Device Name ] ➔ " BT "
appears in the front display.
3. Play music files from the device connected via Bluetooth through the Soundbar .
If the device fails to connect
• If a previously connected Soundbar listing (e.g . " [AV] Samsung Soundbar Q6T-Series ") appears in
the list, delete it.
• Then repeat steps 1 and 2.
NOTE
• After you have connected the Sound bar to your mobile device the first time, use the " BT READY "
mode to reconnect. See Page 12 for details.
For more information about Bluetooth connections, refer to "Connecting a TV via
Bluetooth" on pages 11 -12.
ENG - 16