Owner's Manual

If the device fails to connect
• If a previously connected Sound bar listing (e.g. " [AV] Samsung Soundbar Q6 T- Series ") appears in
the list, delete it.
• Then repeat steps 1 through 3.
Disconnecting the Sound bar from the TV
Press the cgJj (Source) button on the top panel or on the remote control and switch to any mode but "B T".
• Disconnecting takes time because the TV must receive a response from the Sound bar.
(The time required may differ, depending on the TV model.)
What is the difference between BT READY and BT PAIRING?
• BT READY : In this mode, you can search for previously connected TVs or connect a previously
connected mobile device to the Sound bar.
• BT PAIRING : In this mode, you can connect a new device to the Soundbar. (Press the * PAIR button
on the remote control or press and hold the cgJj (Source) button on the top of the Sound bar for
more than 5 seconds while the Sound bar is in " BT " mode.)
NOTES
• If asked for a PIN code when connecting a Bluetooth device, enter <0000>.
• In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the
Sound bar and the Bluetooth device exceeds 32.8 ft (10 meters).
• The Sound bar automatically turns off after 20 minutes in the Ready state.
• The Sound bar may not perform Bluetooth search or connection correctly under the following
circumstances:
- If there is a strong electrical field around the Soundbar.
- If two or more Bluetooth devices are simultaneously paired with the Soundbar.
- If the Bluetooth device is turned off, not in place, or malfunctions.
• Electronic devices may cause radio interference. Devices that generate electromagnetic waves
must be kept away from the Sound bar main unit - e.g., microwaves, wireless LAN devices, etc.
ENG -12