AV Receiver System User Manual
Table Of Contents
- Safety information
- Features
- Contents
- Description
- Connections
- CONNECTING A CD PLAYER
- CONNECTING AN iPod
- CONNECTING THE FM ANTENNA
- Basic functions of your AV Receiver
- BEFORE USING THE AV RECEIVER
- Basic functions of your AV Receiver
- Setup
- SETUP MENU TREE
- SETTING THE SPEAKER SIZE
- CONNECTION SETTING FOR SURROUND BACK
- SETTING THE SPEAKER LISTENING DISTANCE
- SETTING THE SPEAKER LEVEL
- SETTING THE TEST TONE
- SETTING DOLBY PRO LOGIC MODE
- SETTING DOLBY PRO LOGIC IIx
- SETTING TONE CONTROL
- SETTING NEO:6 MODE
- SETTING EX/ES MODE
- AV SYNC
- MP3 ENHANCER
- SMART VOLUME
- ASC (AUTO SOUND CALIBRATION) SETUP
- DRC SETUP
- DUAL MONO SETUP
- HDMI SETUP
- VARIABLE SET (Low Power Consumption SETUP)
- VIDEO CONV. (Video Conversion)
- ZONE2 SETUP
- 12-V TRIGGER
- Operation
- USING THE SURROUND MODES
- LISTENING TO THE RADIO
- USING AN iPod
- CONVENIENT FUNCTIONS
- SOFTWARE UPGRADE
- Miscellaneous
- OPERATING YOUR TV WITH THE REMOTE CONTROL
- OPERATING YOUR DVD OR BD PLAYER WITH THE REMOTE CONTROL
- Troubleshooting
- ASC Error List
- Appendix
- SPECIFICATIONS
42
Setup
CONNECTION SETTING FOR SURROUND BACK
Settings for the surround back speaker differ depending on the connection method and installation site of the
speaker to be connected. You must confi gure the SB SETUP settings according to the connected speaker before
you listen to music properly.
Press the SETUP/MENU button on the remote control.
Each time the button is pressed, the mode switches between SETUP
ENTER and SETUP OFF.
Press the ENTER button to select SETUP ENTER.
Press the
▲▼
buttons to select SB SETUP, and then press the ENTER
or
►
button.
Press the ▲▼ to select a proper setting for the surround back speaker.
SURR-BACK : Select this if you want to install the surround back
speaker in the default settings. With this setting, you can enable the
Dolby Pro Logic IIx mode.
PLIIz : Select this if you want to install the surround back speaker in the
top front corner. With this setting, you can enable the Dolby Pro Logic IIz
mode.
ZONE2 : Select this if you want to connect the ZONE2-specifi c speakers (left/right) to the surround back port.
With this setting, you can enable the Powered ZONE2 feature.
Bi-AMP : Select this if you want to connect the Bi-Amp compliant speaker to the surround back port. With
this setting, you can enable the Bi-Amp feature.
Depending on the SB SETUP settings, the surround back speaker or front height speaker menus may not
be activated or may differ in the speaker menu: SPEAKER SIZE, SPEAKER LEVEL, SPEAKER DISTANCE.
Depending on your setting, you may not use different features simultaneously.
If you set SURR-BACK, for
instance, you cannot use the following features: PLIIz, ZONE2 and Bi-AMP.
1.
•
2.
3.
4.
•
•
•
•
M
Æ
Æ
- HW-C900-XAA_0831.indd 42 - HW-C900-XAA_0831.indd 42 2010-08-31 6:22:262010-08-31 6:22:26