AV Receiver System User Manual
Table Of Contents
- Safety information
- Features
- Contents
- Description
- Connections
- CONNECTING A CD PLAYER
- CONNECTING AN iPod
- CONNECTING THE FM ANTENNA
- Basic functions of your AV Receiver
- BEFORE USING THE AV RECEIVER
- Basic functions of your AV Receiver
- Setup
- SETUP MENU TREE
- SETTING THE SPEAKER SIZE
- CONNECTION SETTING FOR SURROUND BACK
- SETTING THE SPEAKER LISTENING DISTANCE
- SETTING THE SPEAKER LEVEL
- SETTING THE TEST TONE
- SETTING DOLBY PRO LOGIC MODE
- SETTING DOLBY PRO LOGIC IIx
- SETTING TONE CONTROL
- SETTING NEO:6 MODE
- SETTING EX/ES MODE
- AV SYNC
- MP3 ENHANCER
- SMART VOLUME
- ASC (AUTO SOUND CALIBRATION) SETUP
- DRC SETUP
- DUAL MONO SETUP
- HDMI SETUP
- VARIABLE SET (Low Power Consumption SETUP)
- VIDEO CONV. (Video Conversion)
- ZONE2 SETUP
- 12-V TRIGGER
- Operation
- USING THE SURROUND MODES
- LISTENING TO THE RADIO
- USING AN iPod
- CONVENIENT FUNCTIONS
- SOFTWARE UPGRADE
- Miscellaneous
- OPERATING YOUR TV WITH THE REMOTE CONTROL
- OPERATING YOUR DVD OR BD PLAYER WITH THE REMOTE CONTROL
- Troubleshooting
- ASC Error List
- Appendix
- SPECIFICATIONS
33
ENG
●
BASIC FUNCTIONS OF YOUR AV RECEIVER
BEFORE USING THE AV RECEIVER
Turning On/Off
Connect the power plug to the outlet.
This unit will set to Standby mode.
Press the POWER button on the main unit for 2 seconds.
This unit will be turned on.
You can also turn the unit on/off by pressing the POWER button on the remote control.
Remote control functions
You can operate your AMP (this AV receiver)/ TV and BD(Samsung only)/DVD player with this remote control.
See pages 62 ~ 64 for more details.
To select a function
Method 1
Press the INPUT SELECT button.
Each time you press this button, FM BD/DVD SAT TV VCR CD AUX1 AUX2
7.1 MULTI CH IPOD AUDIO IPOD VIDEO will be selected in turn.
Method 2
Press the TUNING/CH, BD/DVD, SAT,
TV/AUX1, CD, MULTI CH, VCR/AUX2 or iPod button.
You can directly select the desired function.
BASICS OF ZONE2
When the ZONE2 speaker is connected properly, turn on the main unit and use MULTI ZONE2 in the front panel
or MAIN/ZONE button on the remote control to select ZONE2.
Press POWER to turn on the ZONE2 feature, and use INPUT SELECT CONTROL to select a source that you
want to output to ZONE2.
You can also use the INPUT SELECT on the main unit.
The mode function as follows :
FM BD/DVD SAT TV VCR CD AUX 1
However, you cannot listen to one FM program in the main zone and a different program in the sub zone.
The SETUP menu will be disabled in ZONE2 mode.
•
•
•
•
1.
2.
M
Basic functions of your AV Receiver
- HW-C900-XAA_0831.indd 33 - HW-C900-XAA_0831.indd 33 2010-08-31 6:22:212010-08-31 6:22:21