HW-C500 HW-C560S AV Receiver System user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register HW-C500-C560S-XAA_0609.
Safety information SAFETY WARNINGS TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ENG IMPORTANT SAFETY INSTRUCTIONS IMPORTANT NOTE: FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth an uncontrolled environment.
Safety information PRECAUTIONS 2.7 inches SETUP 3.9 inches INPUT SELECT TONE CONTROL ENTER SOUND EFFECT ASC MIC AUDIO ASSIGN ASC MULTI CH INPUT S. DIRECT AV SYNC TUNING MODE SELECT MEMORY 3.9 inches 3.9 inches Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches).
ENG Features Digital AV Receiver iPod This product is a pure digital AV receiver that performs digital signal processing to minimize signal distortion and loss. You can enjoy music files by connecting your iPod/iPhone to the AV Receiver with the supplied iPod dock. Dolby Pro Logic II DPL II processes any high quality stereo signal source into five separate full frequency channels.
Contents SAFETY INFORMATION 2 FEATURES 2 3 4 Safety Warnings Important Safety Instructions Precautions 5 Accessories 8 10 12 13 13 14 Front Panel Rear Panel Display Insert Remote Control Batteries Operation Range of the Remote Control Tour of the Remote Control 16 18 20 21 22 23 24 25 26 27 28 Speaker Positioning Connecting the Speakers Connecting External Devices/Your TV via HDMI HDMI Function Connecting to your TV Connecting a DVD or BD(Blu-ray) Player Connecting a Cable, Satellite or Set-top Box
ENG SETUP 31 44 MISCELLANEOUS 51 TROUBLESHOOTING Setup Menu Tree Setting the Speaker Size Setting the Speaker Listening Distance Setting the Speaker Level Setting the Test Tone Setting Dolby Pro Logic II Mode Setting Dolby Pro Logic II Setting Tone Control AV SYNC MP3 Enhancer Smart Volume ASC (Auto Sound Calibration) Setup DRC Setup HDMI Setup Variable Set 44 45 46 47 49 50 Using the Surround Modes Using the Subwoofer Selection Button Listening to the Radio Using an iPod Convenient Functions Softwar
Description FRONT PANEL 1 2 3 4 5 6 7 8 SETUP INPUT SELECT ENTER TONE CONTROL SOUND EFFECT ASC MIC 9 ASC AUDIO ASSIGN S. DIRECT /STEREO MULTI CH INPUT AV SYNC TUNING MODE 10 11 12 13 14 15 SELECT 16 MEMORY 17 Used to select a source. (FM BD/DVD SAT TV CD AUX 5.1 MULTI CH IPOD AUDIO IPOD VIDEO). 1 INPUT SELECT 2 Used to move the cursor up, down, left or right and select an item in the SETUP menu. UP(,), DOWN(.
ENG ASC BUTTON Used to select the ASC(Auto Sound Calibration) mode. 11 AUDIO ASSIGN BUTTON Toggles to select an input mode for the selected source. 12 S.DIRECT/STEREO BUTTON Used to select the S.DIRECT or STEREO mode. 13 MULTI CH INPUT BUTTON Used to select a connected 5.1 multi channel player. 14 AV SYNC BUTTON Used to select the Audio Delay Mode. 15 TUNING MODE BUTTON Used to select the Manual or Preset mode for FM radio. 16 SELECT BUTTON Used to change the radio frequency.
Description REAR PANEL < HW-C500 > 1 2 3 4 5 6 7 iPod 8 9 10 11 12 13 14 15 < HW-C560S > 1 2 3 4 5 6 7 iPod 8 9 10 11 12 13 14 15 * All those pictures of the Rear panel are based on Model HW-C560S. 10 HW-C500-C560S-XAA_0609.
ENG FM ANTENNA JACK Connect the FM Antenna here. 2 MULTI CH IN JACKS Receives the analog audio signal from an external player with a multi-channel port. 3 VIDEO IN JACKS Receives the video signal from a video player (BD/DVD, SAT, TV). 4 HDMI IN JACKS Receives digital video and audio signals simultaneously using an HDMI cable. 5 HDMI OUT JACK Outputs digital video and audio signals simultaneously using an HDMI cable. 6 USB PORT Can be only used for firmware upgrades.
Description DISPLAY 1 2 3 4 5 7 6 1 SPEAKER INDICATORS Displays the connected speakers. 2 LISTENING MODE INDICATORS Displays the current listening mode. 3 TUNING INDICATORS Displays the status of the current radio broadcast. 4 AUDIO INPUT INDICATORS Displays the audio input signal type of the currently connected external audio source. 5 SPEAKER LEVEL INDICATOR Displays the speaker level. 6 RADIO FREQUENCY INDICATORS Displays the current radio frequency range.
ENG INSERT REMOTE CONTROL BATTERIES * Batteries (AAA size) ● DESCRIPTION M Follow these precautions to avoid leaking or cracking cells: Place batteries in the remote control so they match the polarity : (+) to (+) and (–) to (–). Assuming typical TV usage, the batteries last for about one year. Use the correct type of batteries. Batteries that look similar may differ in voltage. Always replace both batteries at the same time. Do not expose the batteries to heat or a flame.
Description TOUR OF THE REMOTE CONTROL INPUT SELECT TV SOURCE POWER 1 2 3 AMP/TV DIMMER BD/DVD 1 2 3 4 5 6 SLEEP 7 8 9 PROLOGIC AUDIO ASSIGN DSP 0 4 22 7 11 MUTE TUNING /CH VOL ASC TUNER MEMORY SUBWOOFER MO/ST SETUP/MENU INFO RETURN EXIT 12 13 14 19 21 6 9 10 18 20 5 8 15 16 17 BD/DVD MULTI CH SAT TV AUX 23 24 25 26 27 28 CD iPod 14 HW-C500-C560S-XAA_0609.
ENG POWER BUTTON Turns the receiver on/off. 2 AMP/TV BUTTON Used to select the AMP/TV mode. - If you select the AMP mode, the button will flash orange. - If you select the TV mode, the button will flash green. 3 NUMBER BUTTONS Used to select a TV channel. 4 PROLOGIC BUTTON Select the desired Dolby Pro Logic II audio mode. 5 SKIP BUTTONS Press to skip backwards or forwards on a connected DVD/BD player or iPod.
Connections This section involves various methods of connecting the AV receiver to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord. SPEAKER POSITIONING * Speakers are provided with model HW-C560S only. Model HW-C500 does not come with speakers. 6.6~9.8 feet (2~3m) AV RECEIVER SETUP INPUT SELECT ENTER TONE CONTROL SOUND EFFECT ASC MIC ASC AUDIO ASSIGN S.
ENG Center speaker It is best to install it at the same height as the front speakers. You can also install it directly over or under the TV. ● CONNECTIONS Surround Speakers Place these speakers behind your listening position. If there isn't enough room, place these speakers so they face each other. Place them about 2 to 3 feet (60 to 90cm) above your ears, facing slightly downward.
Connections CONNECTING THE SPEAKERS (HW-C500) FRONT (R) SURROUND (R) (not supplied) (not supplied) SUBWOOFER (not supplied) ACTIVE SUBWOOFER (not supplied) SURROUND (L) FRONT (L) (not supplied) (not supplied) SW CENTER (not supplied) iPod Model HW-C500 AV Receiver M HW-C500 Speakers are provided with model HW-C560S only. Model HW-C500 does not come with speakers. Contact a Samsung Electronics retailer for purchasing. Connecting Speaker Wire 1. Loosen the knob by turning counterclockwise. 2.
ENG CONNECTING THE SPEAKERS (HW-C560S) FRONT (R) SURROUND (R) SUBWOOFER PS-FC560S PS-RC560S PS-WC560S SW ● CONNECTIONS ACTIVE SUBWOOFER (not supplied) SURROUND (L) FRONT (L) PS-RC560S PS-FC560S CENTER PS-CC560S Model HW-C560S AV Receiver HW-C560S FRONT SPEAKER PS-FC560S iPod M CENTER SPEAKER PS-CC560S SURROUND SPEAKER PS-RC560S SUBWOOFER PS-WC560S The Active Subwoofer is sold separately. Contact a Samsung Electronics retailer for purchasing. Connecting the Speakers 1 1.
Connections CONNECTING EXTERNAL DEVICES/YOUR TV VIA HDMI HDMI is a digital standard interface for connection to such devices as a TV, projector, DVD player, Blu-ray player, set-top box and more. HDMI removes any loss of signal from analog conversion, enabling you to enjoy video and audio sound quality as it was originally created in the digital source. By connecting through the HDMI(High-Definition Multimedia Interface) interface, you can play back digital video and audio.
ENG HDMI FUNCTION Using Anynet+(HDMI-CEC) ● CONNECTIONS Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control. Anynet + can be used by connecting this AV Receiver to a SAMSUNG TV using an HDMI Cable. This is only available with SAMSUNG TVs and SAMSUNG AV Products that support Anynet+. 1. Connect the AV receiver to a Samsung TV with an HDMI cable. (See page 20) 2. Set the Anynet+ function on your TV.
Connections CONNECTING TO YOUR TV iPod or COMPONENT VIDEO IN IN or OPTICAL OUT AUDIO OUT Video Connection If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from the Component Video Output (PR, PB and Y) jacks on the back of your AV Receiver to the Component Video Input jacks on your TV. OR Connect the Video cable from the VIDEO OUT (MONITOR) jack on the back of your AV Receiver to the Video Input jack on your TV.
ENG CONNECTING A DVD OR BD(Blu-ray) PLAYER VIDEO IN ● CONNECTIONS COMPONENT IN or iPod or DVD or BD Player COMPONENT OPTICAL OUT OUT AUDIO OUT VIDEO OUT or Video Connection Connect a Component video cable(not supplied) from the COMPONENT IN (BD/DVD) (PR, PB and Y) jacks on the back of your AV Receiver to the Component Video Output jacks on your DVD/BD player. OR Connect a Video cable from the VIDEO IN (BD/DVD) jack on the back of your AV Receiver to the Video Output jack on your DVD/BD player.
Connections CONNECTING A CABLE, SATELLITE OR SET-TOP BOX COMPONENT IN VIDEO IN or iPod or COMPONENT OPTICAL OUT OUT AUDIO OUT VIDEO OUT SAT(Cable/Satellite/Set-top box) or Video Connection Connect a Component video cable(not supplied) from the COMPONENT IN (SAT) (PR, PB and Y) jacks on the back of your AV Receiver to the Component Video Output jacks on your SAT. OR Connect a Video cable from the VIDEO IN (SAT) jack on the back of your AV Receiver to the Video Output jack on your SAT.
ENG CONNECTING A CD PLAYER ● CONNECTIONS CD player AUDIO OUT COAXIAL OUT or iPod Audio Connection Connect the Digital Input (COAXIAL) on your AV Receiver to the Digital Output of the CD Player. OR Connect AUDIO IN (CD) on your AV Receiver to the Audio Out of the CD player. M If the CD player has only one audio output jack, connect it to either the right or left audio input jack of the main unit. Connect the audio cable's red plug to the red jack and white cable to the white jack.
Connections CONNECTING 5.1 CHANNEL DEVICES You can connect the AV receiver to a DVD player, SUPER AUDIO CD player or other device with 5.1 channel output. C SW iP iPod SW FRONT SURROUND C CENTER SUB WOOFER 5.1 CH 5.1 Channel device 26 HW-C500-C560S-XAA_0609.
ENG CONNECTING AN iPod You can listen to audio from an iPod through the main unit. For iPod operation with your receiver, see this page and 47 ~ 48. ● CONNECTIONS iPod iPod 1. Connect the iPod dock connector to the iPod jack on your reciever. 2. Place the iPod in the Dock. • If you want to play a movie stored in your iPod player, you should set the player's TV Out option to On before inserting it into the dock. See page 48. 3. Press the iPod button on the remote control.
Connections CONNECTING AN iPod (Continued) iPod models that are compatible with HW-C500/HW-C560S M "Made for iPod" means that the dock has been designed to connect specifically for the iPod and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. iPod is a trademark of Apple Inc., registered in the U.S. and other countries. iPhone is a trademark of Apple Inc.
ENG Basic functions of your AV Receiver BEFORE USING THE AV RECEIVER Turning On/Off Connect the power plug to the outlet. Remote control functions You can operate your AMP (this AV receiver)/ TV and BD(Samsung only)/ DVD player with this remote control. See pages 51 ~ 53 for more details. To select a function Method 1 Press the INPUT SELECT button. • Each time you press this button, FM BD/DVD SAT TV CD AUX 5.1 MULTI CH IPOD AUDIO IPOD VIDEO will be selected in turn.
Basic functions of your AV Receiver SELECTING DIGITAL/ANALOG INPUT You can listen to sound in 2 channel analog , Dolby Digital or DTS using this unit. INPUT SELECT TV SOURCE POWER 1. Press the INPUT SELECT button to select a desired function (BD/DVD, SAT,TV, CD). See page 29. 2. Press the AUDIO ASSIGN button on the remote control to select the external device you have connected.
ENG Setup For your convenience, you can set this AV receiver's features for the best use. SETUP MENU TREE Here’s a quick look at how the setup menus are organized on your AV Receiver. ● SETUP AUDIO SETUP BD/DVD OPT 1,2,3 COAX OPT 1,2,3 COAX OPT 1,2,3 COAX OPT 1,2,3 COAX SAT TV CD SPK SIZE SPK DISTANCE SPK LEVEL TEST TONE DPLII SETUP TONE CONTROL A/V SYNC MP3 ENHANCER SMART VOLUME ASC SETUP DRC SETUP HDMI SETUP VARIABLE SET 31 HW-C500-C560S-XAA_0609.
Setup SETUP MENU TREE (Continued) AUDIO SETUP SPK SIZE FRONT LARGE SMALL LARGE SMALL NONE LARGE SMALL NONE YES NO CENTER SURR SUBW CROVR 60Hz, 80Hz, 100Hz, 120Hz, 150Hz, 180Hz, 200Hz SPK DISTANCE F.L F.R CEN S.L 1 ~ 30 FT (1 foot steps) , default : 10 FT S.R S.W SPK LEVEL F.L F.R CEN S.L -10 ~ +10dB (1dB step) , default : 00dB S.R S.
ENG SETUP MENU TREE (Continued) ● SETUP AUDIO SETUP SPK SIZE SPK DISTANCE SPK LEVEL TEST TONE DPLII SETUP PANORAMA OFF ON DIMENSION -7 ~ 0 ~ +7 C- WIDTH 0~7 TONE CONTROL TONE OFF ON BASS -6dB ~ +6dB (1dB Step) TREBLE -6dB ~ +6dB (1dB Step) A/V SYNC MP3 ENHANCER SMART VOLUME ASC SETUP DRC SETUP HDMI SETUP VARIABLE SET 33 HW-C500-C560S-XAA_0609.
Setup SETUP MENU TREE (Continued) AUDIO SETUP SPK SIZE SPK DISTANCE SPK LEVEL TEST TONE DPLII SETUP TONE CONTROL A/V SYNC SYNC OFF ~ SYNC 240MS (10MS Step) MP3 ENHANCER OFF ON SMART VOLUME OFF ON ASC SETUP START EQ ON / EQ OFF DRC SETUP MAX STD HDMI SETUP SYNC MIN ON OFF AVR TV ON OFF AUDIO ANYNET+ VARIABLE SET OFF ON 34 HW-C500-C560S-XAA_0609.
ENG SETTING THE SPEAKER SIZE Signal outputs and frequency response from the speaker will be adjusted according to your speaker configuration and whether certain speakers are used or not. ● SETUP 1. Press the SETUP/MENU button. • Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. Æ 2. Press the ENTER button to select SETUP ENTER. 3. Press the ▲▼ buttons to select SPK SIZE, and then press the ENTER or ► button. 4.
Setup SETTING THE SPEAKER LISTENING DISTANCE If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the center and surround speakers. 1. Press the SETUP/MENU button. • Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. 2. Press the ENTER button to select SETUP ENTER. Æ 3. Press the ▲▼ buttons to select SPK DISTANCE, and then press the ENTER or ► button. 4.
ENG SETTING THE SPEAKER LEVEL You can set the balance and level of speakers. 2. Press the ENTER button to select SETUP ENTER. ● SETUP 1. Press the SETUP/MENU button. • Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. Æ 3. Press the ▲▼ buttons to select SPK LEVEL, and then press the ENTER or ► button. 4. Press the ▲▼ buttons to select the speaker you want, and then press the ENTER or ► button. • Each time you press this button, F.L Æ F.RÆ CEN Æ S.L Æ S.R Æ S.
Setup SETTING THE TEST TONE Use the test tone to check the speaker connection status or level. 1. Press the SETUP/MENU button. • Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. 2. Press the ENTER button to select SETUP ENTER. 3. Press the ▲▼ buttons to select TEST TONE, and then press the ENTER or ► button. 4. Press the ▲▼ buttons to select the option you want, and then press the ENTER or ► button. • AUTO : Test signal will be automatically output as follows; F.
ENG SETTING DOLBY PRO LOGIC II MODE This mode provides 5.1 channel sound from 2 channel sources. Press the PROLOGIC button on the remote control. • MOVIE : Adds realism to the movie soundtrack. ● SETUP • MUSIC : Provides 5.1 channel surround sound for digital, analog or existing stereo sources. • GAME : Enhances the excitement of the game’s sound. • MATRIX : You will hear 5.1 channel surround sound. • PL (Pro Logic) : You will experience a surround effect with 5.1 channel surround sound.
Setup SETTING TONE CONTROL This will enable you to adjust the bass and treble level. 1. Press the SETUP/MENU button. • Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. 2. Press the ENTER button to select SETUP ENTER. Æ 3. Press the ▲▼ buttons to select TONE CONTROL, and then press the ENTER or ► button. 4. Press the ▲▼ buttons to select the option you want, and then press the ENTER or ► button.
ENG AV SYNC Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to match the video. 2. Press the ENTER button to select SETUP ENTER. ● SETUP 1. Press the SETUP/MENU button. • Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. Æ 3. Press the ▲▼ buttons to select A/V SYNC, and then press the ENTER or ► button. 4. Press the ▲▼ buttons to set the A/V Sync mode you want.
Setup ASC (AUTO SOUND CALIBRATION) SETUP By setting the ASC function just once when you relocate or install the unit, you can have the unit automatically recognize the distance between speakers, levels between channels, and frequency characteristics to create a 5.1-channel sound field optimized for your environment. - Before Setting 1. Plug the ASC microphone into the ASC MIC jack. 2. Place the ASC microphone at the listening position. 3.
ENG If the ASC microphone is disconnected during the ASC setup, the setup will be canceled. You can also press the ASC button on the remote control to use this function. DRC SETUP ● SETUP You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.DRC compresses the audio to make the loudest sounds quieter and the quietest sounds louder. 1. Press the SETUP/MENU button. • Each time the button is pressed, the mode switches between SETUP ENTER and SETUP OFF. 2.
Operation USING THE SURROUND MODES Using the SOUND EFFECT button on the front of the main unit Selecting the SFE mode 1. Press the SOUND EFFECT button to select SFE. • Each time you press this button, SFE Æ DPLII will be selected in turn. 2. Press the UP/DOWN ( ,,. ) button. • Each time you press the UP/DOWN ( ,,. ) button, STEREO Æ HALL 1 Æ HALL 2 Æ J.CLUB Æ CHURCH Æ ROCK Æ CLASSIC Æ LIVE Æ GAME Æ MOVIE Æ CONCERT Æ STADIUM will be selected in turn.
ENG USING THE SURROUND MODES (Continued) Surround Mode and Input Signal Chart o = active, – = inactive DOLBY (MUSIC, GAME, MATRIX, PL, MOVIE) SFE STEREO Input Signal Decoding Dolby D (5.1ch) Dolby D (2ch) Dolby D (2ch Surr) L.PCM (Audio) Analog Dolby D (2ch) Dolby D (2ch Surr) L.PCM (Audio) Analog Dolby D (2ch) Dolby D (2ch Surr) L.PCM (Audio) L.PCM 96KHz Analog Dolby Digital 5.
Operation LISTENING TO THE RADIO You can listen to the radio by using either automatic or manual tuning. 1. Press the INPUT SELECT button to select FM. 2. Select a frequency (radio broadcast). • Preset tuning : Press the #,$ buttons on the remote control to select the preset frequency. • Manual tuning 1 (Automatic tuning): Press and hold the TUNING/CH ( .,, ) buttons on the remote control to automatically tune in a frequency. • Manual tuning 2 : Press the TUNING/CH ( .
ENG USING AN iPod You can enjoy playback of your iPod using the supplied remote control. Listening to Music (iPod audio function) ● OPERATION You can play music files stored in the iPod player by connecting it to the AV receiver. 1. Connect the iPod dock connector to the iPod jack on the AV Receiver. 2. Place the iPod in the dock. • Your iPod is automatically turned on. 3. Press the INPUT SELECT button on the remote control to select IPOD AUDIO mode. 4. Press the PLAY button on the remote control to play.
Operation USING AN iPod (Continued) Watching a Movie (iPod Video function) You can play video files stored in the iPod player on a TV by connecting it to the AV receiver. 1. Connect the iPod dock connector to the iPod jack on the AV receiver. 2. In the iPod screen, move to Videos > Settings and set the TV Out option to On. 3. Place the iPod in the dock. 4. Press the INPUT SELECT button on the remote control to select IPOD VIDEO mode. 5.
ENG CONVENIENT FUNCTIONS Sleep timer function You can set the time that this unit will shut itself off. 4 5 6 ● OPERATION Press the SLEEP button. • SLEEP : OFF Æ 15 Æ 30 Æ 45 Æ 60 Æ 90 Æ 120 M (MIN) will be selected in turn. SLEEP 7 8 9 PROLOGIC AUDIO ASSIGN DSP 0 To check sleep timer Press the SLEEP button. • The remaining time before this unit will shut itself off is shown on the display. • Pressing the button again changes the sleep time from what you set previously.
Operation Reset function When the Power is on, 1. Press the MUTE button. • MUTE appears on the display. SLEEP 7 8 9 PROLOGIC AUDIO ASSIGN DSP 0 2. Press the 9 button five times and then press the ENTER button. • INITIAL : NO appears on the display. 3. Press the ▲▼ buttons to select YES. • The unit will turn off after 5 seconds. MUTE VOL ASC TUNER MEMORY SUBWOOFER TUNING /CH MO/ST POPUP SETUP/MENU INFO RETURN EXIT When the Power is Off, 1.
ENG Miscellaneous OPERATING YOUR TV WITH THE REMOTE CONTROL 1. Press the POWER button to turn on the TV. 2. Press the AMP/TV button to set the remote to TV mode. ● MISCELLANEOUS 3. Point the remote control toward the TV. 4. While holding down POWER button, enter the code corresponding to your brand of TV. • If there is more than one code listed for your TV in the table, enter one at a time to determine which code works. • If the code matches the TV's code, the TV will be turned off. 5.
Miscellaneous OPERATING YOUR TV WITH THE REMOTE CONTROL (Continued) TV Brand Code List Brand Admiral (M.Wards) A Mark Anam AOC Bell & Howell (M.
ENG OPERATING YOUR DVD OR BD PLAYER WITH THE REMOTE CONTROL 1. Press the POWER button to turn on the DVD (BD) player. 2. Press the BD/DVD button on the remote control to set the remote to DVD (BD) mode. 4. While holding down POWER button, enter the code corresponding to your brand of DVD (BD). • If there is more than one code listed for your DVD (BD) in the table, enter one at a time to determine which code works. • If the code matches the DVD (BD)'s code, the DVD (BD) will be turned off. 5.
Troubleshooting Before requesting service, please check the following. Symptom Check Remedy The unit will not turn on. • Is the power cord plugged into the outlet? • Connect the power plug to the outlet. A function does not work when the button is pressed. • Is there static electricity in the air? • Disconnect the power plug and connect it again. Sound is not produced.
ENG Symptom Remedy • Is Digital input selected? ● TROUBLESHOOTING There is no sound when playing a DTS encoded DVD. Check • Check whether the DVD player is properly connected and refer to page 30 to select the digital input. Product protection function Heat protection • The protection function will come on if the main unit or power transformer overheats. " " will appear in the display .
Appendix SPECIFICATIONS GENERAL FM TUNER AMPLIFIER FREQUENCY RESPONSE HDMI VIDEO OUTPUT Power supply Standby power consumption Power consumption Main unit Weight Dimensions (W x H x D) Operating temperature range Operating humidity range Frequency response Usable sensitivity S/N ratio Distortion Stereo separation Tuner output level Rated output Front speaker(left+right) Center speaker Surround speaker(left+right) Subwoofer speaker Input sensitivity/impedance S/N ratio (analog input) Separation (1kHz)
SAMSUNG AV receiver LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Area Contact Center ` North America Canada 1-800-SAMSUNG (726-7864) 01-800-SAMSUNG (726-7864) Mexico U.S.
QUESTIONS OR COMMENTS? COUNTRY IN THE US CALL 1-800-SAMSUNG (7267864) OR VISIT US ONLINE AT WRITE www.samsung.com/us Samsung Electronics America, Inc. 105 Challenger Road Ridgefield Park, NJ 07660-0511 Code No. AH68-02266R HW-C500-C560S-XAA_0609.
