The Alltel HueTM P O R T A B L E D u a l - M o d e T E L E P H O N E User Guide Please read this manual before operating your phone, and keep it for future reference. r500_AF01.
Intellectual Property All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to Samsung and protected under federal laws, state laws, and international treaty provisions.
Disclaimer of Warranties; Exclusion of Liability EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE PRODUCT “AS IS”, AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE P
Table of Contents Intellectual Property ..................................................................................................2 Samsung Telecommunications America (STA), LLC ...................................................2 Disclaimer of Warranties; Exclusion of Liability .........................................................3 Getting Started ............................................................................................8 Understanding this User Manual .......................
Editing an Existing Contact Entry .............................................................................59 Speed Dial Numbers ...............................................................................................63 Renaming a Contacts Group ....................................................................................63 Deleting a Contacts Entry ........................................................................................64 Sending a Contacts Entry ..........................
Tools ........................................................................................................123 Tools Menu ...........................................................................................................124 Voice Service ........................................................................................................124 Bluetooth ..............................................................................................................130 Calendar .....................
Index ........................................................................................................
Section 1: Getting Started Topics Covered • Understanding this User Manual • Activating Your Phone • Charging the Battery • Setting Up Your Voice Mail • Memory Card (Optional) This section explains how to start using your phone by activating your service, setting up your voice mail, or getting an understanding of how this manual is put together. Understanding this User Manual The chapters of this guide generally follow the same order as the menus and submenus in your phone.
Activating Your Phone Activating Your Phone Contact your Wireless Carrier and follow their instructions for obtaining service, if necessary. We suggest that you read this guide to fully understand the services your phone supports. Install the Battery Note: Your phone comes packaged with a partially charged rechargeable standard Li-Ion battery and travel adapter. Important!: You must fully charge the battery the first time you use your phone, otherwise you could damage the battery. 1.
Turn Your Phone Off 䊳 Press and hold the off. key for two or more seconds. Your phone powers Note: If your phone is on and you press for less than one second, the phone will not power off. This prevents your phone from being turned off accidentally. Remove the Battery Important!: You must unplug the Travel Adapter (if it is connected) before removing the battery from the phone during charging to avoid damage. 1. Press and hold the key to turn off the phone (if on). 2.
Setting Up Your Voice Mail Note: For connection to an electrical supply not located in North America, you must use an adaptor of the proper configuration for the power outlet. Use of the wrong adapter could damage your phone and void your warranty. 2. Insert the smaller end of the Travel Adapter into the charger/accessory connector on the left side of your phone. + Note: With the device turned OFF, a discharged battery recharges fully in approximately 4 hours.
2. Follow the prompts in the new user tutorial to setup your voice mail box. Listen to voice mail 1. In standby mode, press and hold the key or dial your own mobile number to dial voice mail. After connecting, you will hear your voice greeting. 2. Interrupt your greeting by pressing . 3. You are then prompted to enter your password. 4. Enter your password and follow the prompts to listen to your voice mail. Memory Card (Optional) Your phone has a memory card slot beneath the battery cover.
Memory Card (Optional) 4. If desired, install another memory card. (See “Install a Memory Card” on page 12 for more information.) 5. Install the battery and battery cover. (See “Install the Battery” on page 9 for more information.
Section 2: Understanding Your Phone Topics Covered • Features of Your Phone • Closed View of Your Phone • Front Open View of Your Phone • Command Keys • Understanding the Display Screen • Your Phone’s Modes This section outlines some key features of your phone. It also displays the screen and the icons that are displayed when the phone is in use. Features of Your Phone • Domestic and international voice and text messaging service (available on participating networks).
Closed View of Your Phone Closed View of Your Phone 1. Camera Lens 2. Power-Accessory Connector 3. Mirror 7. Memory Card Socket 6. Camera/Media Player Key 4. Volume Keys 5. Front Display Features 1. Camera Lens — The lens of your built-in camera. 2. Power/Accessory Connector — Used to plug in the charging accessories and also connect any available accessory cables to your phone. Lets you plug in an optional headset for safe, convenient, hands-free conversations. 3.
7. Memory Card Socket — Used to plug in a microSD memory card for additional multimedia file storage. Front Open View of Your Phone 1. Earpiece 2. Main Display 17. Stereo Speakers 16. Right Soft Key 3. Left Soft Key 15. MENU/OK Key 4. Volume Keys 5. Speakerphone Key 6. TALK Key 14. Camera/Media Player Key 13. Voice Recognition Key 12. END Key 11. BACK Key 7. Navigation Key 10. Alpha-numeric Keys 8. Microphone 9. Special Function Keys Features 1. Earpiece — Lets you hear the other caller. 2.
Command Keys 6. TALK Key — Lets you place or receive a call. In standby mode, press the key once to access the recent call log. 7. Navigation Key — Lets you scroll through the phone menu options. 8. Microphone — Lets the other caller hear you clearly when you are speaking to them. 9. Special Function Keys — Enter special characters. Perform various functions. 10. Alphanumeric Keys — Use these keys to enter numbers, letters, and characters. 11.
• When the left soft key function is Edit, press the Edit (left) soft key ( ) to edit a Contact. • When the right soft key function is Erase, press the Erase (left) soft key ( and a pop-up window appears prompting you to confirm the erasure. ) Right Soft Key Some functions of the right soft key are as follows. • In standby mode, press the Message (right) soft key ( ) to open the Messages menu. • When the right soft key function is Back, press the Back (right) soft key ( to back up one menu level.
Command Keys 1. If you enter an incorrect character, briefly press to backspace (and delete) the character. 2. To erase the entire sentence, press and hold 3. To back up one menu level, briefly press . . 4. To return to standby mode, press and hold until you return to standby mode. END Key 1. In standby mode, press and hold the END key ( ) to turn your phone off. 2. Briefly press 3. Press once to disconnect a call. to return to standby mode from any menu, or to cancel the last input. 4.
Understanding the Display Screen 1. The top line of your phone’s main display 1 contains icons that indicate network status, battery power, signal strength, connection type, and more. 2. The center portion of the main display 2 shows information such as call progress information, messages, and photos. 3. The bottom line of the main display shows 3 current soft key functions.
Your Phone’s Modes • Example: “Card not available, Insert card” • Warning • Example: “Low Battery,” “Memory Full!” Backlights Backlights illuminate the display and the keypad. When you press any key or open the phone, the backlights come on. They go off when no keys are pressed within a period of time set in the Backlight menu. Note: During a phone call, the display backlight dims and turns off after 60 seconds to conserve battery power, regardless of the Backlight setting.
Lock Modes Phone Lock When the phone is in Phone Lock mode, restrictions are placed on phone use. You can receive calls and messages, but cannot place outgoing calls (except for emergency numbers) until you unlock the phone. Phone Lock mode also restricts access to menus and the volume key. Unlock your phone by entering the lock code when prompted. (See “Lock Phone” on page 152 for more information.) Standby Mode Standby mode is the state of the phone once it has found service and is idle.
Your Phone’s Modes When you end a call, your phone automatically drops out of Speakerphone mode. In Speakerphone mode, press and hold the Speakerphone key ( to using the earpiece. ) to switch back Vibrate Mode Silence all tones your phone makes and replace them with vibrations. 䊳 In standby mode, repeatedly press and the Down volume key ( ) until Vibrate appears in the display. The volume key is on the upper left side of phone, near the upper left soft corner of the display. Adjust the Ringer 1.
Section 3: Call Functions Topics Covered • Making a Call — Number Entry Dialing • Making a Call — Speed Dialing • Making a Call — Quick Search Dialing • Making a Call — Voice Dialing • Answering a Call • Ignoring a Call • Adjusting the Call Volume • Calls Log • Roaming This section explains how to make or answer a call. This section also includes the features and functionality associated with making or answering a call.
Making a Call — Number Entry Dialing Making a Call — Number Entry Dialing 1. With the phone on, enter the number you wish to call using the keypad. 2. Press the key to place the call. Dialing Emergency Numbers To place an emergency call: 1. With the phone on, enter 911 using the keypad. 2. Press the key to place the call. You can specify other numbers as emergency numbers using the Emergency # settings. (See “Emergency #” on page 153 for more information.
• Calling to the U.S. or Canada from Mexico: Dial 001, plus the ten-digit number (includes area code). • Calling Voicemail from Mexico: Dial 001, plus your ten-digit wireless number. Once you hear the recorded prompt, press and enter your passcode. Manual Pause Calling When you call automated systems (like banking services), you are often required to enter a password or account number.
Making a Call — Quick Search Dialing Two-Touch Dialing Memory locations 010 through 099 are special Two-Touch dialing locations. Example: For location number 013, briefly press the key, then press and hold the name and number appear in the display and the number is dialed. def key until the Three-Touch Dialing Memory locations 100 through 999 are special Three-Touch dialing locations.
Using Voice Dial Use the Voice Dial command to dial any number stored in your Contacts list by saying the name of the contact (Name Dialing). You can also use Voice Dial to dial any valid telephone number, even numbers not stored in your contact list, by speaking the individual digits in the number (Digit Dialing). Voice Dialing Tips: • Wait for the beep before speaking. • Speak clearly at a normal volume, as if you were talking to someone on the phone.
Answering a Call • “Mobile” Voice Dial dials the specified number. Dialing a Number To dial a number using Voice Dial, do the following: 1. In standby mode, press the key. “Say a Command” appears in the display and is pronounced through the speaker. 2. Say “Call”. VoiceSignal prompts you to “Say the name or #”. 3. Speak clearly and say the telephone number of the person you want to call. For example, say “7 8 1 9 7 0 5 2 0 0." If it recognizes the number, Voice Dial repeats and dials the number.
• If the caller can’t be identified, Call from unavailable#, Call from restricted number, or no number appears in the display. • Your phone continues to notify you of the call until one of the following events occurs: • You answer the call. • You ignore the call. • The calling party ends the call. • The call is sent to voicemail. Answering an Incoming Call 䊳 Press the key. The ring tone and/or vibration stop and the caller’s voice can be heard in the earpiece.
Calls Log • • • • Press Press Press Press ghi jkl mno pqrs for All Calls. for Data Call. for Call Timer. for Data Counter. Note: In cases where there is a Contacts match for a Calls log entry, the name associated with the number appears in the display instead of the number. Outgoing Calls Your phone retains information about the last 90 outgoing calls and stores them in the Outgoing calls log. You can review the Outgoing calls log for the time and date of a call, as well as other information.
Note: See See “Creating and Sending New Messages” on page 67 for more information. 5. Use the navigation keys to highlight an option. 6. Press the key to perform the highlighted option’s function. Incoming Calls Your phone retains information about the last 90 Incoming calls and stores them in the Incoming call log. You can review the Incoming call log for the time and date of the call, as well as other information. 1. In standby mode, press the MENU key ( and display.
Calls Log Missed Calls Your phone retains information about the last 90 missed calls (calls that were never picked up) and stores them in the Missed call log. You can review the Missed call log for the time and date of the call, as well as other information. 1. In standby mode, press the MENU key ( ), then press (for Calls) and for Missed Calls. A list of your missed calls appears in the display. jkl def 2.
3. Press the Options (right) soft key ( ). A pop-up menu containing the following options appears in the display: • Save — Save the number to your Contacts. • Details — Calls from Contacts Only — Shows the entry for the calling/called Contact. • Erase — Erase the selected call from your Calls log. • Lock/Unlock — Protect the selected call from being erased. • Erase All — Erase all calls from your Calls log.
Calls Log • Erase All — Erase all calls from your Data call log. • Data Counter — Shows the amount of data Transmitted and Received during this call, the Total amount of data exchanged during this call, and the total amount of data exchanged since the phone was activated. 4. Use the navigation keys to highlight an option. 5. Press the key to perform the highlighted option’s function.
Note: Data Counter is not for billing purposes. 1. In standby mode, press the MENU y ( ), then press (for Calls) and for Data Counter. The following options appear in the display: • Transmit — View the total amount of data transmitted by your phone since the last reset. • Received — View the total amount of data received by your phone since the last reset. • Total — View the total amount of data sent or received by your phone since the last reset.
Roaming How Roaming Works Roam Option lets you set roaming preferences if you move in and out of your home network. The following roaming options are available: • Home only — Your phone is available for normal operation only in the designated coverage area. • Automatic-A — Your Wireless Provider’s Preferred Roaming List (PRL) of networks is used to acquire service. If no preferred networks are found, any digital “A” system is acquired.
Section 4: Menu Navigation Topics Covered • Menu Navigation • Menu Outline This section explains the menu navigation for your phone. It also includes an outline of the menus available with your phone.
Menu Navigation Menu Navigation Access menus using the MENU key ( ( ), or a shortcut. ), the navigation keys, the two soft keys 1. In standby mode, press the MENU key ( ). The first of several menus appears in the display. 2. Use the navigation keys to browse phone menus. 3. Press the key to access a menu or sub-menu highlighted in the display. Return to the Previous Menu Press the menu.
The In-Use Options Access numerous menus and features even while in a call. Note: If the call is disconnected while accessing the In-Use Option, the In-Use Option disappears from the display and the phone eventually returns to standby mode. 1. While in a call, press the Options (right) soft key ( ). The following menu items appear in the display: • Contacts — The Contacts Find screen appears in the display. • Call History — View, respond to, and manage your recent outgoing, incoming, and missed calls.
Menu Outline 1.6 Erase Messages 1.6.1 1.6.2 1.6.3 1.6.4 1.7 Inbox Outbox Drafts All Messages Msg Settings 1.7.1 General 1.7.1.1 1.7.1.2 1.7.1.3 1.7.1.4 1.7.1.5 1.7.1.6 1.7.1.7 1.7.1.8 1.7.2 Text Message 1.7.2.1 1.7.2.2 1.7.3 Axcess Shop Axcess Web 3.1 4 Auto Receive Axcess Shop 2.1 3 Auto View Auto Scroll Picture/Video Message 1.7.3.1 2 Auto Save Auto Erase Quick Text Voicemail # Entry Mode Callback # Signature Reminder Axcess Web Contacts 4.1 4.2 4.3 4.
4.5 5 Calls 5.1 5.2 5.3 5.4 5.5 5.6 5.7 6 Memory Info Outgoing Calls Incoming Calls Missed Calls All Calls Data Call Call Timer Data Counter Multimedia 6.1 6.2 6.3 6.4 6.5 6.6 6.7 Camera Camcorder Music Player My Images My Videos My Ringtones My Sounds 6.7.1 6.8 6.8.1 6.8.2 7 Record New Shuffle Image Shuffle Melody Shuffle Tools 7.1 Voice Service 7.1.1 7.1.2 Voice Commands Voice Settings 7.1.2.1 7.1.2.2 7.1.2.3 Choice Lists Sensitivity Digit Dialing 7.1.2.3.1 7.1.2.3.2 7.1.2.4 Sound 7.1.2.
Menu Outline 7.1.2.4.3 7.1.2.4.4 7.1.2.5 7.1.2.6 7.2 Voice Launch About Bluetooth 7.2.1 7.2.2 7.2.3 Add New Device Registered List Bluetooth Settings 7.2.3.1 7.2.3.2 7.2.3.3 7.2.3.4 Enable/Disable Discovery Mode Device Name Supported Profiles 7.2.3.4.1 7.2.3.4.2 7.2.3.4.3 7.2.3.4.4 7.2.3.4.5 7.2.3.4.6 7.2.3.4.7 7.2.3.5 7.3 7.4 7.5 Device Info Alarm 1 Alarm 2 Alarm 3 World Time Calculator Stop Watch Coverter 7.9.1 7.9.2 7.9.3 7.9.4 7.9.5 7.9.6 7.
8 Settings 8.1 8.2 Location Display Settings 8.2.1 8.2.2 Menu Style Wallpaper 8.2.2.1 8.2.2.2 8.2.2.3 8.2.2.4 8.2.3 8.2.4 8.2.5 Clock Format Theme Dialing Font 8.2.5.1 8.2.5.2 8.2.6 8.2.7 8.2.8 Style Size Banner Backlight 8.2.7.1 8.2.7.2 8.2.7.3 8.2.7.4 8.3 My Images My Videos Preset Images Image Shuffle Main Display Keypad Brightness Sub LCD Front Contrast Sound Settings 8.3.1 Volume 8.3.1.1 8.3.1.2 8.3.1.3 8.3.2 Ringer Type 8.3.2.1 8.3.2.2 8.3.
Menu Outline 8.3.4.1 8.3.4.2 8.3.5 8.4 Vibrating Alert Call Settings 8.4.1 8.4.2 8.4.3 8.4.4 8.4.5 8.4.6 8.5 Tone Level Tone Length Call Answer Auto Answer Auto Retry TTY Mode Voice Privacy Data Settings Phone Settings 8.5.1 8.5.2 8.5.3 Airplane Mode Language Security 8.5.3.1 8.5.3.2 8.5.3.3 Lock Phone Change Lock Emergency # 8.5.3.3.1 8.5.3.3.2 8.5.3.3.3 8.5.3.4 8.5.3.5 8.5.3.6 Reset Phone Erase All Entry Restriction 8.5.3.6.1 8.5.3.6.2 8.5.4 8.5.5 8.5.6 8.
8.6.2.1 8.6.2.2 8.6.2.3 8.6.2.4 8.6.2.5 8.6.3 Card Memory 8.6.3.1 8.6.3.2 8.6.3.3 8.6.3.4 8.6.3.5 8.7 46 Check for Update Phone Info 9.1 9.2 9.3 Memory Usage My Images My Videos My Music Format Card Software Update 8.7.
Section 5: Entering Text Topics Covered • Text Entry Modes • Changing the Text Entry Mode • Entering Text in Alpha (Abc) Mode • Entering Text in T9 Word Mode • Entering Upper and Lower Case Letters • Entering Numbers • Entering Symbols This section outlines how to select the desired text input mode when entering characters into your phone. This section also describes how to use the T9 predictive text entry system to reduce the amount of key strokes associated with entering text.
Text Entry Modes You can compose text messages using alphabetical characters, symbols, and numbers. Each method of character entry (symbol, number, and so on) is called a text entry mode. There are four text entry modes, as indicated: • Alpha—Alphabetical text entry mode. Options are: • ABC — All upper case • Abc — Initial capital • abc — All lower case • Symbols — Symbol entry mode. Enter symbols into your message by pressing the corresponding number that appears above it in the display.
[ Entering Text in T9 Word Mode 4. Press the key to enter a space. Entering Text in T9 Word Mode T9 Word recognizes commonly used words for a sequence of keypresses and inserts the word into your message. Using T9 mode is much faster than the more traditional method Alpha mode, since T9 requires only one key press per letter of the word that you are spelling. Note: See “Changing the Text Entry Mode” on page 48 for instructions on changing text entry modes. 1.
Adding Words to the T9 Word Dictionary If pressing the keys corresponding to a word you want to enter and then scrolling through the pop-up list does not display that word, do the following: 1. Clear the word using the key. 2. Change the text entry mode to Add T9 Word. Note: See“Changing the Text Entry Mode” on page 48 for instructions on changing the text entry mode to Add T9 Word. 3. Enter the word you want to add to the T9 Word dictionary.
Entering Symbols Entering Symbols Symbol mode enables you to enter symbols such as @ or % in a text message. 1. In standby mode, press the Message (right) soft key ( (for Send Message) and text message. ), then press for Text Message to compose a new 2. Enter the phone number of the recipient, then press the 3. Press the Left soft key ( key. ). A pop-up menu containing the following options appears in the display: • T9 Word • Abc • ABC • 123 • Symbols • Add T9 Word 4.
Section 6: Understanding Your Contacts Topics Covered • Your Contacts List • Adding a New Contacts Entry • Finding a Contacts Entry • Editing an Existing Contact Entry • Speed Dial Numbers • Renaming a Contacts Group • Deleting a Contacts Entry • Sending a Contacts Entry • Memory Info This section explains how to manage your daily contacts by storing their name and number in your Contacts. Contacts entries can be sorted by name.
Your Contacts List Your Contacts List Your Contacts list can store up to 500 entries, with each contact having up to five associated phone numbers, an email address, and a picture ID. Each phone number can be up to 32 digits in length, including hard pauses. Contact names can be up to 32 characters in length. You can also specify a memory location for each entry, and you can restrict access to the Contacts list to prevent unauthorized use.
5. If desired, assign the new Contact to a Group. This lets you send messages to and find this Contact and other related contacts. (See “Group” on page 58 for more information.) 6. If desired, select a unique Ringtone to identify this new Contact. (See “Ringer Type” on page 147 for more information.) 7. If desired, enter an additional phone number (My Circle or Fax) or email address (Email 2) for the new Contacts entry. 8.
Adding a New Contacts Entry 4. Use the navigation keys to highlight the number type that matches your new entry and press the key. The New Contact screen appears in the display with the number being save populating the selected number type field. (For more information on creating a new Contacts entry, see “Using the Contacts Add Option” on page 53.) Adding the number to an existing Contacts entry: 5. Use the navigation keys to highlight Update Existing, then press the key.
A list of your calls appears in the display. 3. Use the navigation keys to highlight the number you wish to store in Contacts. 4. Press the Options (right) soft key ( ). The following options appear in the display: • Save — Saves the selected number to your Contacts list. • Details — Calls to/from Contacts Only — Shows the entry for the called Contact. • Erase — Deletes the selected number from the selected Calls log. • Lock / Unlock — Prevents/allows deletion of the selected number.
Finding a Contacts Entry • If VoiceSignal recognizes the name you said, the contact information for that name appears in the display. • If VoiceSignal does not recognize the name you said, a choice list of up to three names appears in the display, and VoiceSignal prompts you with “Did you say?” followed by the first name on the list. 4. Say “Yes” to confirm the name or “No” to hear the next name, or use the keypad to select the correct name from the list.
- New Contact — Lets you add a new number to your Contacts list or to the selected contact. - Erase — Lets you delete the highlighted contact. - Send Text Msg — Lets you send a text message to the selected contact. - Send PIC Msg — Lets you send a picture message to the selected contact. - Send Video Msg — Lets you send a video message to the selected contact. - Call — Lets you place a call to the highlighted contact.
Editing an Existing Contact Entry Search by Number This option lets you find a Contacts list entry by one of its phone numbers. 1. In standby mode, enter the first few numbers of the Contacts list entry you wish to find (such as the area code or area code and exchange — for example, 888-987). 2. Press the Options (right) soft key ( ). The following menu options appear in the display: • Search — Lets you find Contacts list entries by their phone numbers.
6. When you’re finished editing the entry, press the key. Your changes are saved and a confirmation message appears in the display. Adding Pauses to Contacts Numbers When you call automated systems (like banking services), you are often required to enter a password or account number. Instead of manually entering the numbers each time, you can store the numbers in your Contacts along with special characters called pauses. • P pause — A hard pause stops the calling sequence until further input from you.
Editing an Existing Contact Entry 2. Press the Edit (left) soft key ( ). The Edit Contact screen appears in the display with the contact name highlighted. 3. Use the navigation keys to highlight a number stored in this contact entry. 4. Use the navigation keys to place the cursor where you want to add a pause (usually at the right-hand end of the number). 5. Press the Options (right) soft key ( ).
• P pause — a hard pause (awaits input from you). Set Speed Dial is highlighted. 5. Press the key. The Speed Dials screen appears in the display. 6. Enter, or use the navigation keys to select, an unassigned Speed Dial number. 7. Press the key to assign the new Speed Dial number to the selected Contact. You are prompted to confirm the assignment. 8. Press the Yes (left) soft key ( ) to assign the selected Speed Dial number. The Edit Contact screen appears in the display. 9.
Speed Dial Numbers - Press the abc (left) soft key ( ). A pop-up menu appears in the display with Abc highlighted. - Use the navigation keys to highlight Shortcuts, then press the key. - Use the navigation keys to highlight the desired domain type (such as, .com, .net, or .edu), then press the key. 5. Press the key to save your changes. Speed Dial Numbers You can assign and change Speed Dial numbers for Contacts entries. 1. In standby mode, press the MENU key ( Contacts) and display.
2. Use the navigation keys to highlight the group (other than General) that you wish to rename, then press the Options (right) soft key ( ). The following options appear in the display: • Send Text Msg — Lets you send a text message to all contacts in the selected Group. • Send PIC Msg — Lets you send a picture message to all contacts in the selected Group. • Send Video Msg — Lets you send a video message to all contacts in the selected Group. • Rename — Lets you change the name of the selected Group.
Sending a Contacts Entry Sending a Contacts Entry Use the Send Name Card With Bluetooth option to send one or more selected Contacts entries to another, compatible phone or other device over a Bluetooth connection. 1. In standby mode, press the Up navigation key. The Find screen appears in the display with a Contacts entry highlighted. 2. Press the Options (right) soft key ( ), then select the Send Name Card With Bluetooth option.
Section 7: Messaging Topics Covered • Creating and Sending New Messages • Message Send Options • Receiving New Messages • Voicemail • Message Folders • Erasing Messages • Message Settings • General Message Settings This section explains how to create, send, receive, and view different types of messages. This section also describes the features and functionality associated with messaging.
Creating and Sending New Messages Creating and Sending New Messages This section guides you through procedures for creating and sending text messages, picture messages, and video messages. Creating and Sending a Text Message 1. In standby mode, press the Message (right) soft key ( ), then press (for Send Message) and for Text Message. The Create Text Msg screen appears in the display showing the Send To list. Tip: You can also access Messages by pressing the MENU key ( ), and then press for Messages.
• Press the Left soft key ( ) to select one of the following text entry methods: – T9 Word – Abc – ABC – 123 – Symbols – Add T9 Word 5. At any point while composing a message, you can set message send options by pressing the Options (right) soft key ( ). (See “Message Send Options” on page 71 for more information.) 6. Once you’re finished composing your message, press the SEND key ( ) to send your message. Creating and Sending a Picture Message 1.
Creating and Sending New Messages 7. To set message send options, press the Options (right) soft key ( ). (See “Message Send Options” on page 71 for more information.) 8. To add a picture to the message, use the navigation keys to highlight the PIC field. • Press the My PIC (left) soft key ( ) to access the picture gallery. If there are no pictures in the gallery, press the Camera (right) soft key ( ) to launch the camera, then take a picture.
12. Once you’re finished composing your picture message, do one of the following: • Press the key to SEND the message. • Press the Options (right) soft key ( ). (See See “Message Send Options” on page 71 for more information.) Creating and Sending a Video Message 1. In standby mode, press the Message (right) soft key ( ), then press (for Send Message) and for Video Message. The Create Video Msg screen appears in the display with the Send To field highlighted.
Message Send Options – Press the Video (right) soft key ( ) to activate the phone’s camcorder and take a new video. (See “Camera-Camcorder” on page 88 for more information.) • Press the Options (right) soft key ( ). (See “Message Send Options” on page 71 for more information.) 9. Once you have selected a video, press the key. The Create Video Msg screen appears in the display with the selected video in the Video field. The Subject field is highlighted. 10.
• Remove Video — Removes the video from a Video message. • Add To Contacts — Lets you add the addressee numbers or Email addresses to your Contacts list. 2. Use the navigation keys to display the various Send Options for each menu item. 3. When the desired send option is highlighted, press the key to confirm the selection or to enter the send option’s sub-menu.
Message Folders Checking your Voicemail 1. In standby mode, press and hold the key until you’re connected to the voice mail system. A recorded message prompts you for a password. 2. Enter your password, then follow the recorded prompts, to listen to your voice message, change administrative options, and so on. Tip: You can also access your Voicemail by using the entries in the Voicemail folder. See “Voicemail” on page 77 for more information.
• Press the Options (right) soft key ( ), The following options appear in the display: – Play Again — Picture Messages only — Replay a sound file included with a message. – Forward — Lets you forward the message to other Email addresses or mobile phone numbers. – Reply With Copy — Text Message only — Lets you reply to a message and include a copy of the original message. – Save PIC — Picture Messages only — Saves a copy of the image included in the selected message to the My Images gallery.
Message Folders 2. Use the navigation keys to highlight a message, then do one of the following: • Press the Erase (left) soft key ( ) to delete the message. • Press the OPEN ( ) key to view the highlighted message, then proceed to Step 3. • Press the Options (right) soft key ( ). The following options appear in the display: – Forward — Send the message to another addressee. – Resend — Re-send the message. – Lock / Unlock — Block a message from being erased or free a message to be erased.
Drafts Folder Messages in the Drafts folder are those that have been composed but never sent. You can return to the Drafts folder at any time to view, edit, or send a draft message. 1. In standby mode, press the Message (right) soft key ( ghi ), then press for Drafts. A list of your draft messages appears in the display. 2. Use the navigation keys to highlight the message that you wish to edit, then do one of the following: • Press the Erase (left) soft key ( ) to delete the message.
Erasing Messages – 123 — Enter numbers by pressing the corresponding key on the keypad. – Symbols — Enter symbols into your message by pressing the corresponding number that appears above it in the display. – Add T9 Word — Enter word to be added to the T9 Word dictionary. Use the navigation keys to highlight the desired option. Press the key to perform the function for the highlighted option. • Press the SEND key ( ) to send the message. • Press the Options (right) soft key ( ).
• Drafts — Lets you delete all draft messages from the Drafts folder. • All Messages — Lets you delete all messages from all message folders. 2. Use the navigation keys to highlight the folder containing the messages that you wish to delete. 3. Press the key to select the highlighted folder. You are prompted to confirm the erasure of all messages in the folder. 4. Press the No (right) soft key ( press the Yes (left) soft key ( selected folder.
General Message Settings • Callback # — Lets you disable, enable, and update the callback number that can be inserted in outgoing messages. • Signature — Lets you disable, enable, and update the text signature that can be inserted in outgoing messages. • Reminder — Lets you set the message receipt reminder to play Once, Every 2 Minutes, Every 15 Minutes, or not to play (Off). 2. Use the navigation keys to highlight the desired sub-menu. 3.
Section 8: Axcess Shop Topics Covered • Finding Applications This section explains the Axcess Shop features where users can download multimedia, applications, games, and check news and sports.
Finding Applications Finding Applications With Axcess Shop, you can download full featured applications over the air including games, personalized ring tones, pictures, and more. 1. In standby mode, do one of the following to launch Axcess Shop: • Press the Right navigation key. • Press the MENU key ( ), then press Axcess Shop. abc (for Axcess Shop) and for Note: The first time you launch Axcess Shop, the warning message “Browse & Download use airtime.” pops up in your display.
Section 9: Axcess Web Topics Covered • Axcess Web • Launching Axcess Web • Using Axcess Web • Using Links • How Axcess Web Keys Work This section outlines how to launch Axcess Web, how to navigate to other pages on the web, and how the keys on the keypad are used with the web application. Additionally, links to other sites are briefly discussed.
Axcess Web Axcess Web With Axcess Web, you can conveniently surf the web and download ringtones and wallpapers using your phone. Each time you launch Axcess Web, your phone connects to the Internet and the service indicator icon ( ) appears in the display. Stored Web Content Axcess Web ends an Internet connection after a certain period of inactivity, however some information from your session remains stored in the phone (if you leave your phone turned on).
Using Axcess Web When you use Axcess Web, some of the keys operate differently than during a normal phone call. Axcess Web presents on-screen items in any of the following ways: • Text or numeric input. • Links (embedded in content). • Numbered options (some may not be numbered). • Simple text. You can act upon options or links by using the soft keys. Axcess Web soft keys The bottom of the Axcess Web display is a bar that contains browser commands.
[ How Axcess Web Keys Work wxyz Pound/Space Key — Press to insert a space when entering text. Number 1 thru 9 — Use the number keys to select items in a menu if they are numbered. End Key — Press to exit the Axcess Web and return the phone to standby mode. Left Soft Key — Press to activate the command that appears above it in the display. Right Soft Key — Press to activate the command that appears above it in the display.
Section 10: Celltop Topics Covered • Celltop • Launching Celltop Celltop (an Alltel application and service) displays cells on your phone to provide you with information you choose, instantly—anytime, anywhere. This section outlines how to launch Celltop on your phone. Note: For more information, refer to the Celltop Guide or call 1-800-ALLTEL-1 (1-800-255-8351).
Celltop Celltop With Celltop, you can display any of a set of customizable cells listing information, such as: • Messages in your Inbox. • Call records in your Calls Log. • Ringtones, those already available on your phone and those you can get. • Current weather at your chosen locations. • Scores and standings of your favorite sports. • Stock quotes that interest you. • Latest headlines from selected news services.
Section 11: Camera-Camcorder Topics Covered • Taking Pictures and Videos • Screen Layouts • Saving Pictures and Videos • Camera Options • Camcorder Options • Zoom • Brightness • The Photo Gallery • Point, Click, and Send Pictures and Videos Use your The Alltel Hue phone to take full color digital pictures and videos, display them on your phone’s vivid color display, and instantly share them with family and friends. It’s fun, and as easy to use as a traditional point-and-click camera or camcorder.
Taking Pictures and Videos Taking Pictures and Videos Taking pictures videos with the built-in camera-camcorder is as simple as choosing a subject, pointing the lens (located on the rear of your phone, at the top), and pressing a button. Taking Snap Shots (Single Pictures) To take a single picture using the current camera settings, do the following: 1. In standby mode, press the Camera key ( ) on the right side of the phone. The message “Loading...
2. Press the Options (right) soft key ( in the display with the Self Timer icon ( ). The options menu bar appears ) highlighted. 3. Use the Left and Right navigation keys to highlight the Multi Shot icon ( ). The following Multi Shot options appear in the display: • Series Shot — Lets you take a series of 3 or 5 photos. • Divided Shot — Lets you take a mozaic of 4 or 9 photos.
Screen Layouts Taking Videos To take a video using the current camcorder settings, do the following: 1. In standby mode, press and hold the Camera key ( ) on the right side of the phone. The message “Loading...” appears in the display followed by the camcorder view finder screen. (See “Camcorder Screen” on page 93 for more information.) Note: You can also activate the camcorder by doing one of the following: 1. Pressing the MENU key ( ), then press mno (for Multimedia) and abc for Camcorder. 2.
Camera Screen Icons Camera — Indicates the camera is active. Night Shot — Indicates the camera is set to take pictures in low light. Quality — Indicates camera’s picture quality setting. (You can change the picture quality setting. See “Quality” on page 103 for more information.) Camera Resolution — Indicates camera’s current resolution setting. (You can change the camera resolution setting. See “Camera Options” on page 94 for more information.
Screen Layouts Multi Shot in use (Series Shot) — Takes multiple pictures when you press the key. The number of pictures taken depends upon the Series Shot setting. Self Timer in use — Delays the camera shutter from 2 to 10 seconds after you press the key. Camcorder Screen When you activate your phone’s camcorder, the first line of the display is shows current camcorder setting icons. The center of the display shows a viewfinder image of the subject at which the camcorder is pointed.
Phone Memory — Indicates videos will be stored in the phone’s memory. Card Memory — Indicates videos will be stored on a microSD Memory Card. Zoom — Enlarges the image from X0 to X9 before you take a video. (Depending on the camcorder quality setting.) Brightness — Brightens or darkens the image from -4 to +4. Self Timer in use — Delays the camcorder from recording for from 2 to 10 seconds after you press the key.
Camera Options 2. Press the Options (right) soft key ( ). The following sub-menus appear in the display: • Self Timer • Multi Shot • Quality • Resolution • White Balance • Fun Tools • Settings • Camcorder 3. Use the Left and Right navigation keys to highlight the desired option and/ or setting, then press the key to save the selected setting. Self Timer Self Timer lets you delay taking a picture long enough to let you join others in a picture. 1. In camera mode, press the Options (right) soft key ( ).
2. Use the navigation keys to highlight one of the following Multi Shot options: • Series Shot — Off / 3 pictures taken in succession / 5 pictures taken in succession. • Divided Shot — Off / 4 of the same new picture in a 2-by-2 array / 9 of the same new picture in a 3-by-3 array. • Auto/Manual — Automatically takes pictures / You Manually take the pictures. 3. Press the key to save the setting. The camera screen appears in the display.
Camera Options Note: The Resolution setting affects zoom capabilities. When Resolution is set to 1280 X 960, zoom is not available. When Resolution is set to any value lower than 1280 X 960, zoom settings 1 – 9 are available. White Balance White Balance allows you to adjust picture quality according to available light. 1. In camera mode, press the Options (right) soft key ( ). The options menu bar appears in the display. 2.
• Sepia — Subjects and pictures appear in a brownish-gray hue. • Antique — Subjects and pictures appear in a grayish-green hue. • Negative — Subjects and pictures appear in inverted colors. • Green — Subjects and pictures appear in a greenish hue. • Aqua — Subjects and pictures appear in an aqua hue. • Cool — Subjects and pictures appear in a bright blue hue. • Warm — Subjects and pictures appear in a redish hue. 4.
Camera Options 3. Use the Up and Down navigation keys to highlight Memory, then press the key. The following Memory options appear in the display: • Phone — Stores pictures in phone memory. • Card — Stores pictures on an optional microSD Memory Card. 4. Use the Up and Down navigation keys to highlight the memory location setting of your choice, then press the key. You’re returned to the camera viewfinder screen. Auto Save 1. In camera mode, press the Options (right) soft key ( ).
3. Use the Up and Down navigation keys to highlight Metering, then press the key. The following options appear in the display: • Average — Adjusts exposure to the average light level over a large picture area. • Center — Adjusts exposure to the average light level over a center portion of the subject. • Spot — Adjusts exposure to the light level over a small portion of the subject. 4. Use the Up and Down navigation keys to highlight the Metering setting of your choice, then press the key.
Camera Options Shutter Sound Choose from four different sounds whenever you take a picture. Aside from being a cool sound effect, Shutter Sounds acts as an audible reminder that your camera has taken a picture. 1. In camera mode, press the Options (right) soft key ( ). The options menu bar appears in the display. 2. Use the Left and Right navigation keys to highlight Settings. 3. Use the Up and Down navigation keys to highlight Shutter Sound, then press the key.
Camcorder Options The Camcorder Options let you adjust the default camcorder settings to suite available lighting, the subject of the video, or the purpose of the video. To access Camcorder Options, do the following: 1. In standby mode, press and hold the Camera key ( ). The camcorder viewfinder screen appears in the display. 2. Press the Options (right) soft key ( ).
Camcorder Options The following options appear in the display: • Off • 2 Sec. • 5 Sec. • 10 Sec. 3. Use the Up and Down navigation keys to highlight the desired delay, then press the key. The camcorder screen appears in the display. The next time you press the key, a countdown timer in the display indicates the time remaining before the camcorder starts recording the video. The phone reads the countdown timer value beginning with two or three and continuing to zero, when recording begins.
3. Use the Up and Down navigation keys to show the various White Balances and the effects they have on a video. 4. When you decide on the White Balance you wish to use, press the key. The camcorder viewfinder screen appears in the display with your selected White Balance applied. The next time you press the White Balance to your video. key, the camcorder applies the selected Color Effects Change the look of your videos with Color Effects.
Camcorder Options 3. Use the Up and Down navigation keys to highlight Memory, then press the key. The following Memory options appear in the display: • Phone — Stores videos in phone memory. • Card — Stores videos on an optional microSD Memory Card. 4. Use the Up and Down navigation keys to highlight the memory location setting of your choice, then press the key. You’re returned to the camcorder viewfinder screen. Auto Save 1. In camcorder mode, press the Options (right) soft key ( ).
Start Sound Choose from two different sounds whenever you begin video recording. Aside from being a cool sound effect, Start Sound acts as an audible reminder that your camcorder has begun recording a video. 1. In camcorder mode, press the Options (right) soft key ( ). The options menu bar appears in the display. 2. Use the Left and Right navigation keys to highlight Settings. 3. Use the Up and Down navigation keys to highlight Start Sound, then press the key.
Zoom 3. Use the Up and Down navigation keys to highlight Reset Settings, then press the key. You are prompted to confirm reset of all camcorder settings. • Select the Yes option to reset the camcorder settings to default values. • Select the No option to keep the current camcorder settings. Camera 1. In camcorder mode, press the Options (right) soft key ( ). The options menu bar appears in the display. 2. Use the Left and Right navigation keys to highlight Camera, then press the key.
3. Press the Options (right) soft key ( ) while viewing pictures in the Gallery. The following options appear in the display: • Send — Send the currently displayed or highlighted picture as a Picture message. • Online Album — Send the currently displayed or highlighted picture to the Online Album. • Set As — Assign the currently displayed or highlighted picture to be standby screen Wallpaper or as a Picture ID for someone in your Contacts list. • Slide Show — Show the pictures as a full screen slide show.
Point, Click, and Send Pictures and Videos 4. Use the Up and Down navigation keys to highlight No and press the key. The Create Pic Msg or Create Video Msg screen appears in the display. Note: For more information about AxcessMyPics.com, contact your Wireless Provider. 5. Enter the recipient’s phone number or email address using the keypad. 6. Press the key to save the address(es) and move to the Subject field. Use the navigation keys to move to the other message fields.
Section 12: Multimedia Topics Covered • Accessing Multimedia • Music Player • My Images • My Videos • My Ringtones • My Sounds • Shuffle This section outlines your phone’s multimedia functions and key features associated with multimedia.
Accessing Multimedia Accessing Multimedia 1. In standby mode, press the MENU key ( ), then press for Multimedia. The following Multimedia sub-menus appear in the display: • Camera — Lets you launch and set up your phone’s camera. (See See “Camera-Camcorder” on page 88 for more information.) • Camcorder — Lets you launch and set up your phone’s camcorder. (See See “Camera-Camcorder” on page 88 for more information.) • Music Player — Lets you play and manage music files stored on a memory card.
The Library screen appears in the display, showing the following options: • All — Lists all music files on the Memory Card and lets you play individual music files or play multiple music files by creating a temporary music playlist. • Artists — Lists artist names for music files on the Memory Card and lets you play one or more music files by a selected artist. • Albums — Lists album titles for music files on the Memory Card and lets you play one or more music files from a selected album.
Music Player Playing Music 1. In standby mode, press the MENU key ( then press (for Multimedia) and Music Player. mno def ), for Tip: You can also directly access the Music Player by using the Music Player shortcuts. In standby mode, press the Left navigation key. The Library screen appears in the display, showing the following options: • All • Artists • Albums • Genres • Playlists 2.
Music Player Controls • Volume key: – To play a music file louder, press the Volume key Up. – To play a music file softer, press the Volume key Down. • Navigation key: – To pause/resume playing a music file, press the key. Note: With the flip closed, use the Camera key to pause/resume playing a music file. – To stop playing a music file, press the Down navigation key. – To skip play to an earlier music file in the selected list, press the Left navigation key.
My Images If there are no pictures stored in your phone or on a memory card, “No Image” appears in the My Images screen. [To launch the camera to take a picture, press the Camera (left) soft key ( ). (For more information, see “Camera-Camcorder” on page 88.)] If there are pictures stored in your phone or on a memory card, up to four thumbnail images of your pictures appear in the display. Tip: You can also access My Images from: -The Camera screen, by pressing the My Images (left) soft key ( ).
My Videos My Videos lets you take videos, review your videos, send them as video messages, and assign your videos as wallpaper on your phone. 1. In standby mode, press the MENU key ( Multimedia) and jkl ), then press mno (for for My Videos. If there are no videos stored in your phone or on a memory card, “No Video” appears in the My Videos screen. If there are videos stored in your phone or on a memory card, up to four thumbnail images from your videos appear in the MY VIDEOS screen. 2.
My Sounds 1. In standby mode, press the MENU key ( Multimedia) and display. mno ), then press (for for My Ringtones. A list of ringtones appears in the mno Tip: You can also access My Ringtones from: -A Set Alarm screen by selecting the Ringer option, highlighting the second (file name) field, pressing the Left or Right navigation key, and selecting My Ringtones. -The Edit Contact screen by selecting the Ringtone field, pressing the Set (left) soft key ( and selecting My Ringtones. ), 2.
Tip: You can also access My Sounds from: -A Set Alarm screen by selecting the Ringer option, highlighting the second (file name) field, pressing the Left or Right navigation key, and selecting My Sounds. -The Edit Contact screen by selecting the Ringtone field, pressing the Set (left) soft key ( selecting My Sounds. ), and Note: Recorded sound files (voice memos) do not appear in these lists. 2. Use the navigation keys to highlight the Record New option, then press the key to record a voice memo.
My Sounds – Sound Info — Displays information about the sound file, such as the file name, file type, and the data size. Use the navigation keys to highlight an option and press the key. 4. Press the key to return to the previous menu, or press the to return to standby mode. key Voice Memo You can use your phone to record voice memos for later playback. Note: The maximum length for a single voice memo is 60 seconds. You can save as many voice memos as will fit in the empty memory capacity.
Erase One Voice Memo 1. In standby mode, press the MENU key ( Multimedia) and display. pqrs ), then press (for for My Sounds. A list of sound files appears in the mno 2. Use the navigation keys to highlight the voice memo you wish to erase. 3. Press the Erase (left) soft key ( ). “Erase Sound?” appears in the display. 4. Press the Yes (left) soft key ( press the No (right) soft key ( ) to erase the selected voice memo, or ) to return to the list of sound files. Erase All Voice Memos at One Time 1.
Shuffle Image Shuffle 1. In standby mode, press the MENU key ( ), then press (for Multimedia) and for Shuffle. The following options appear in the display: • Image Shuffle — When set to On, presents a random slide show of a set of specified pictures as Wallpaper in standby mode. • Melody Shuffle — When set to On, plays one of a set of specified ringtones and/or sound files, selected randomly, as the ringer for incoming calls. Use the navigation keys to highlight Image Shuffle and press the key.
Melody Shuffle 1. In standby mode, press the MENU key ( ), then press (for Multimedia) and for Shuffle. The following options appear in the display: • Image Shuffle — When set to On, presents a random slide show of a set of specified pictures as Wallpaper in standby mode. • Melody Shuffle — When set to On, plays one of a set of specified ringtones and/or sound files, selected randomly, as the ringer for incoming calls. Use the navigation keys to highlight Melody Shuffle and press the key.
Section 13: Tools Topics Covered • Tools Menu • Voice Service • Bluetooth • Calendar • Memo Pad • Alarm Clock • World Time • Calculator • Stop Watch • Converter • Tip Calculator This section explains how to use your phone’s digital assistant functionality to schedule events, set reminders, create a “to do” list, perform calculations, and more.
Tools Menu Tools is a suite of Personal Information Management (PIM) applications such as a Calendar, To Do List, and Memo Pad that run on your phone. You can use your phone to schedule events, set reminders, create a to do list, perform calculations, and more with the functions provided by this useful feature. Opening Tools Menu 1. In standby mode, press the MENU key ( ), then press for Tools. The following sub-menus appear in the display: • Voice Service — Lets you access voice recognition functions.
Voice Service • Voice Settings—Lets you tailor VoiceSignal to better respond to your voice and your phone use preferences. 2. Use the navigation keys to highlight the desired sub-menu, then press . Voice Commands To start VoiceSignal, do one of the following: • In standby mode, press the key. “Say a Command” appears in the display and is pronounced through the earpiece, followed by a list of available commands.
Note: Speaking clearly, say the command that you want to use. If, after a few seconds, the device has not recognized a command, it prompts you to repeat the command. If, after a few more seconds, it still has not recognized a command, it tells you “Sorry, no match found,” and cancels voice recognition. Voice Command Tips: • Make sure you wait for the beep before speaking. • Speak clearly at a normal volume, as if you were talking on the phone.
Voice Service Sensitivity 1. In standby mode, press the MENU key ( ), then press (for Voice Service), (for Voice Settings), and Sensitivity. The Sensitivity screen appears in the display. abc 2. pqrs (for Tools), for abc Use the navigation keys to adjust the selected Sensitivity setting to Reject More spoken commands or names or to Reject Less spoken commands or names. 3. Press the key to accept the new setting.
2. Use the navigation keys to highlight Adapt Digits, then press the key. Your phone displays the first digit sequence and “Please say” plays through the speaker followed by the four digits appearing in the display. 3. Wait for the beep and say the digits using your normal tone of voice. After a moment, the phone plays back the recording and prompts “Did the recording sound ok?” • If the recording was good, say “Yes.” • If you need to re-record, say “No.
Voice Service Sound Sound lets you specify what (if any) text prompts you want your phone to read to you through the earpiece. 1. In standby mode, press the MENU key ( ), then press (for Tools), (for Voice Service), (for Voice Settings), and for Sound. The following options appear in the display: • Prompts — Enables or disables audio prompts. • Digits — Enables or disables audio digit playback. • Names — Enables or disables audio name playback.
Bluetooth Bluetooth is a short-range wireless communications technology capable of exchanging information over a distance of about 30 feet without requiring a physical connection. Unlike infrared, you don't need to line up the devices to beam information with Bluetooth. If the devices are within a range of one another, you can exchange information between them, even if they are located in different rooms.
Bluetooth Note: When pairing you phone with another Bluetooth device other than a headset or headphones, the same passkey or PIN must be entered on both devices (when prompted) for the pairing to succeed. 7. Enter the device passkey or PIN and press the key. Registered List This menu provides a list of Bluetooth wireless technology devices discovered by your handset. 1. In standby mode, press the MENU key ( ), then press (for Tools) and for Bluetooth.
Calendar Calendar lets you view the current, past, or future month in a monthly calendar layout. While viewing the calendar, the current date is highlighted and days with scheduled events are surrounded by a box. View an event 1. In standby mode, press the MENU key ( and def ), then press pqrs (for Tools) for Calendar. A calendar appears in the display with the current date highlighted. The month and year also appear. 2. Use the navigation keys to move around within the calendar.
Memo Pad 5. Enter the start and End dates and times for the event using the keypad. Enter the dates and times for the event using 2 digits for day, month, hour, and minute entries. Use 4 digits for year entries. 6. Use the Left and Right navigation keys to change between AM and PM, or press abc for AM or press pqrs for PM. 7. When you’re finished entering the dates and times, use the Up and Down navigation keys to highlight the Alert field.
3. To view the memo, press the VIEW key ( ). 4. To edit the memo you are viewing, press the Edit (left) soft key ( ). Edit the memo using the keypad. (See “Entering Text” on page 47 for more information.) 5. To erase the memo you are viewing, press the Options (right) soft key ( ), then select the Erase option. You are prompted to verify the erasure. Press the Yes (left) soft key ( ) to erase the memo. Press the No (right) soft key ( ) to keep the memo.
Alarm Clock When an Alarm Sounds An animated alarm clock appears in the display with the options Snooze or Dismiss, and an alert sounds when the specified time for the alarm arrives. 䊳 Use the navigation keys to highlight Dismiss, then press the key to silence the alarm. • If the alarm was set as a Daily alarm, the alarm icon remains in the top of the display. • If the alarm was set as a Mon.-Fri. alarm, the alarm icon remains in the top of the display.
• Reset Alarm — Disables the highlighted Alarm and resets its settings to default values. • Reset All — Disables all Alarm and resets all of their settings to default values. 4. Use the navigation keys to highlight the desired option, then press the key. World Time World Time lets you view the time of day or night in another part of the world. World Time displays time in any of 45 different cities and/or time zones around the world. 1.
Calculator 3. Press the Options (right) soft key ( ) select to display (DST On) or not display (DST Off) Daylight Savings Time (DST) for the selected time zone. 4. Do one of the following: • Press the phone. • Press the key to set the selected time zone as the home time zone for your key to return to the Tools menu. Calculator You can perform calculations, including addition, subtraction, multiplication, and division using your phone. 1.
2. Press the key to start, stop, and resume the stopwatch count. 3. Press the Record (left) soft key ( ) at the start of each succeeding event/lap to record the completion time for the previous event/lap. 4. Press the Reset (right) soft key ( ) to erase all stop watch (lap) times recorded.
Converter 4. Press the key to edit the exchange rate. 5. Use the Up and Down navigation keys to highlight the currency to be converted To, then change the current exchange rate. 6. Press the key to save the changed exchange rate. 7. Press the key to return to the Currency Converter screen. Currency — Adding Exchange Rates You can use the Currency Converter to convert from and to obscure currencies by adding exchange rates for these currencies.
3. Use the Up and Down navigation keys to highlight the currency exchange rate to be erased. 4. Press the Erase (right) soft key ( ). You are prompted to confirm the erasure. 5. Press the Yes (left) soft key ( or press the No (right) soft key ( ) to erase the selected exchange rate ) to return to the Exchange Rate list.
Section 14: Changing Your Settings Topics Covered • Location • Display Settings • Sound Settings • Call Settings • Phone Settings • Memory Info • Software Update This section explains how to customize your phone to suit your needs and preferences.
Location This function identifies your location to the network via the Global Positioning System (GPS). You can set this function for continuous operation or to operate only in the event that you dial 911. Note: Contact your Wireless Provider to determine whether, when, or where location-based services are available. 1. In standby mode, press the MENU key ( Settings), and ), then press tuv (for for Location.
Display Settings 3. Press the key to enter the highlighted sub-menu. The following sections describe the above listed display sub-menus in greater detail. Menu Style Menu Style allows you to choose how main menus appear in your display. 1. In standby mode, press the MENU key ( ), then press (for Settings), (for Display Settings), and for Menu Style. The following options appear in the display: • Icon — Display main menus as icons. • List — Display main menus in a list format. 2.
- Off — Disables random display of the Shuffle pictures and/or images and restores the My Images or Preset Images setting. Use the navigation keys to select the desired option, then press the key. Clock Format Clock Format lets you choose whether to show the time in the display in digital or analog format. 1. In standby mode, press the MENU key ( ), then press (for Settings), (for Display Settings), and for Clock Format.
Display Settings • Style — Sets font (Normal, Quill Pen, Sticky, or Color Dial) used to show dialed numbers. • Size — Sets size (Enable Zoom-out or Disable Zoom-out) of the Style font used to show dialed numbers. 2. Use the Navigation key to highlight the desired option and setting, then press the key to save the setting. Banner Create your own personalized greeting that appears in the display while your phone is in standby mode. 1.
• Sub LCD — Use the Up and Down navigation keys to select the foreground color for the Sub (Front) LCD) between any of 8 optional settings. 2. Use the navigation keys to highlight an option. 3. Press the key to enter the highlighted option’s sub-menu and to save changed settings as desired. Front Contrast Set the Front (Sub) LCD contrast to your preference. 1. In standby mode, press the MENU key ( ), then press (for Settings), (for Display Settings), and for Front Contrast.
Sound Settings Ringer Type You can assign ringer types and melody tones for calls, alarms, and other alerts, in the Ringer Type sub-menu. 1. In standby mode, press the MENU key ( ), then press (for Settings), (for Sound Settings), and for Ringer Type. The following options appear in the display: • Voice Calls — Lets you set which ringtone, sound file, and/or one of a set of ringtones and/or sound files plays when you receive a voice call.
2. Use the navigation keys to highlight a sub-menu, then press the key. 3. Use the Up and Down navigation keys to highlight On or Off. 4. Press the key to confirm your selection. Key Tone Key Tone lets you adjust the volume level and length of tone that the keypad generates each time you press a key. 1. In standby mode, press the MENU key ( Settings), (for Sound Settings), and following options appear in the display: • Tone Level (volume) • Tone Length Tone Level is highlighted. def 2.
Call Settings Vibrating Alert Set your phone to vibrate in sync with ringtones and melodies your phone plays. 1. In standby mode, press the MENU key ( Settings), def (for Sound Settings), and ), then press (for for Vibrating Alert. tuv jkl 2. Use the Navigation key to highlight On or Off, then press the key. Call Settings Call Answer You can select a specific answer mode when you receive an incoming call. 1.
Auto Retry Auto Retry automatically re-dials a number if the connection fails. Depending upon your location, the number of times your phone automatically dials the number may vary. 1. In standby mode, press the MENU key ( ), then press (for Settings), (for Call Settings), and for Auto Retry.
Phone Settings Voice Privacy Voice Privacy when enabled (that is, set to Enhanced), turns on advanced voice encryption. 1. In standby mode, press the MENU key ( ), then press (for Settings), (for Call Settings), and for Voice Privacy. The following options appear in the display: • Standard — Voice privacy is disabled • Enhanced — Voice privacy is enabled 2. Use the Up and Down navigation keys to highlight the Voice Privacy option of your choice, then press . Your settings are saved.
Language The language option on your phone can change the language of voice prompts, menus, and key-input. 1. In standby mode, press the MENU key ( ), then press (for Settings), (for Phone Settings), and for Language. The following options appear in the display: • English • Spanish 2. Use the Navigation key to highlight your language preference, then press the key.
Phone Settings Change Lock The default lock code for your phone is generally the last four digits of your phone number. It is advisable to change the default lock code to a secret code for security purposes. 1. In standby mode, press the MENU key ( Settings), (for Phone Settings), and prompted to enter the lock code. jkl ), then press (for for Security. You’re tuv def Note: The default lock code is the last four digits of your telephone number. 2. Press abc for Change Lock.
Store Emergency Numbers 1. In standby mode, press the MENU key ( Settings), (for Phone Settings), and prompted to enter the lock code. jkl ), then press (for for Security. You’re tuv def Note: The default lock code is the last four digits of your telephone number. 2. Enter the lock code, then press 3. Press , abc , or def def for Emergency #. to select from the three emergency number entries. 4. Enter an emergency number (up to 32 digits in length). 5.
Phone Settings Note: The default lock code is the last four digits of your telephone number. 2. Enter the lock code, then press for Erase All Entry. You are prompted to enter the lock code a second time. jkl Note: The default lock code is the last four digits of your telephone number. 3. You are prompted to confirm erasure of all entries. 4. Press the Yes (left) soft key ( (right) soft key ( ) to erase all entries or press the No ) to return to the Security sub-menu.
2. Use the navigation keys to highlight the desired option, then press the key to save your setting. The phone powers itself off and back on. System Select The System Select menu allows you to select the roaming setting for your phone. 1. In standby mode, press the MENU key ( ), then press (for Settings), (for Phone Settings), and for System Select. The following roaming options appear in the display: • Home only — Your phone is available for normal operation only within your designated coverage area.
Phone Settings - Enter the current time using your keypad. The hour and minute must be entered using two digits each and in 12/24-hour format. - Use the Left and Right navigation keys to select AM, PM, or 24 Hours. - Press to save the your time setting. Quick Search Quick Search is an easy way to locate Menu items and Contacts. 1. In standby mode, press the MENU key ( ), then press (for Settings), (for Phone Settings), and for Quick Search.
2. Press the Up navigation key. The Find screen appears in the display with the first contact name matching your entry highlighted. 3. Press the key to call the contact. PC Connection PC Connection allows you to select how you want to connect your phone to your personal computer. Tip: For more information on using PC Connection, contact your Wireless Provider. 1. In standby mode, press the MENU key ( ), then press (for Settings), (for Phone Settings), and for PC Connection.
Memory Info following file type options appear in the display: • Images • Videos 2. Use the Up and Down navigation keys to highlight the desired file type, then press the key. The following storage options appear in the display: • Phone Memory — saves the selected type of files in your phone’s memory. • Card Memory — saves the selected type of files in a removable microSD memory card. 3. Use the Up and Down navigation keys to highlight the desired storage location, then press the key.
• My Images • My Videos • My Ringtones • My Sounds 2. Use the Up and Down navigation keys to highlight the My Images / Videos / Ringtones / Sounds sub-menu, then press the key. A list of all files in the related folder appears in the display. Files are listed by name, and each file entry shows the name and size of each file. 3. To erase files, do the following: • Press the Options (right) soft key ( ).
Memory Info Card Memory Card Memory lets you review a removable, microSD Memory Card’s available memory, manage your files stored there, and format new microSD Memory Cards. Memory Usage Memory Usage lets you review your usage of your Memory Card. 1. In standby mode, press the MENU key ( ), then press (for Settings), (for Memory Info), (for Card Memory), and Memory Usage.
• Use the Up and Down navigation keys to highlight Erase, then press the key. • Use the Up and Down navigation keys to highlight a file you want to erase, then press the key to mark the file for erasure. (Press the Mark All (right) soft key ( ) to mark all files for erasure.) • Press the Done (left) soft key ( ). You are prompted to confirm erasure of the selected file(s). • Press the Yes (left) soft key ( ) to erase all marked files or press the No (right) soft key ( ) to return to the Erase screen. 4.
Software Update Card. 2. Press the Yes (left) soft key ( the No (right) soft key ( ) to format the Memory Card or press ) to return to the Card Memory screen. Software Update Software Update lets you update your phone’s software by downloading and installing improved software elements from your wireless provider’s network. 1. In standby mode, press the MENU key ( ), then press (for Settings), and for Software Update.
Section 15: Phone Info Topics Covered • Phone Number • Icon Glossary • Version This section explains Phone Info options that let you identify the hardware and software versions of your phone and let you identify the phone number assigned to your phone.
Phone Number Phone Number This option causes the Phone Number screen to appear in the display and show the ten-digit number assigned to your phone by your Wireless Provider. 1. In standby mode, press the MENU key ( ), then press (for Phone Info), and for Phone Number. The phone number assigned by your Wireless Provider appears in the display. 2. Press wxyz to return to the Phone Info menu.
Section 16: Health and Safety Information Topics Covered • Health and Safety Information • Samsung Mobile Products and Recycling • UL Certified Travel Adapter • Consumer Information on Wireless Phones • Road Safety • Responsible Listening • Operating Environment • Using Your Phone Near Other Electronic Devices • Potentially Explosive Environments • Emergency Calls • FCC Notice and Cautions • Other Important Safety Information • Product Performance • Availability of Various Features/Ring Tones • Battery Stan
Health and Safety Information These FCC exposure limits are derived from the recommendations of two expert organizations, the National Counsel on Radiation Protection and Measurement (NCRP) and the Institute of Electrical and Electronics Engineers (IEEE). In both cases, the recommendations were developed by scientific and engineering experts drawn from industry, government, and academia after extensive reviews of the scientific literature related to the biological effects of RF energy.
– Body-worn: 0.519 W/kg SAR information on this and other model phones can be viewed on-line at http://www.fcc.gov/oet/ea. To find information that pertains to a particular model phone, this site uses the phone FCC ID number which is usually printed somewhere on the case of the phone. Sometimes it may be necessary to remove the battery pack to find the number.
Consumer Information on Wireless Phones What kinds of phones are the subject of this update? The term wireless phone refers here to hand-held wireless phones with built-in antennas, often called "cell," "mobile," or "PCS" phones. These types of wireless phones can expose the user to measurable radio frequency energy (RF) because of the short distance between the phone and the user's head.
Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone industry to take a number of steps, including the following: • Support needed research into possible biological effects of RF of the type emitted by wireless phones; • Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and • Cooperate in providing users of wireless phones with the best possible information on possible effects of wire
Consumer Information on Wireless Phones What are the results of the research done already? The research done thus far has produced conflicting results, and many studies have suffered from flaws in their research methods. Animal experiments investigating the effects of radio frequency energy (RF) exposures characteristic of wireless phones have yielded conflicting results that often cannot be repeated in other laboratories.
What is FDA doing to find out more about the possible health effects of wireless phone RF? FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to ensure that high priority animal studies are conducted to address important questions about the effects of exposure to radio frequency energy (RF). FDA has been a leading participant in the World Health Organization international Electromagnetic Fields (EMF) Project since its inception in 1996.
Consumer Information on Wireless Phones What about children using wireless phones? The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you want to take steps to lower exposure to radio frequency energy (RF), the measures described above would apply to children and teenagers using wireless phones. Reducing the time of wireless phone use and increasing the distance between the user and the RF source will reduce RF exposure.
In February 2002, the Federal trade Commission (FTC) charged two companies that sold devices that claimed to protect wireless phone users from radiation with making false and unsubstantiated claims. According to FTC, these defendants lacked a reasonable basis to substantiate their claim. What about wireless phone interference with medical equipment? Radio frequency energy (RF) from wireless phones can interact with some electronic devices.
Road Safety • International Commission on Non-Ionizing Radiation Protection: http://www.icnirp.de • National Radiation Protection Board (UK): http://www.hpa.org.uk/radiation • US Food and Drug Administration http://www.fda.gov/cellphones Road Safety Your wireless phone gives you the powerful ability to communicate by voice, almost anywhere, anytime. But an important responsibility accompanies the benefits of wireless phones, one that every user must uphold.
7. Do not engage in stressful or emotional conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations that have the potential to divert your attention from the road. 8. Use your wireless phone to call for help. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident or medical emergencies. Remember, it is a free call on your wireless phone! 9. Use your wireless phone to help others in emergencies.
Responsible Listening depending on the nature of the sound, the device settings, and the headphones that are used. As a result, there is no single volume setting that is appropriate for everyone or for every combination of sound, settings and equipment. You should follow some commonsense recommendations when using any portable audio device: • Set the volume in a quiet environment and select the lowest volume at which you can hear adequately.
National Institute on Deafness and Other Communication Disorders National Institutes of Health 31 Center Drive, MSC 2320 Bethesda, MD 20892-2320 Voice: (301) 496-7243 Email: nidcdinfo@nih.gov Internet: http://www.cdc.gov/niosh/topics/noise/default.html National Institute for Occupational Safety and Health Hubert H. Humphrey Bldg. 200 Independence Ave., SW Washington, DC 20201 Voice: 1-800-35-NIOSH (1-800-356-4647) Internet: http://www.cdc.gov/niosh/topics/noise/default.
Using Your Phone Near Other Electronic Devices Implantable Medical Devices A minimum separation of six (6) inches should be maintained between a handheld wireless phone and an implantable medical device, such as a pacemaker or implantable cardioverter defibrillator, to avoid potential interference with the device.
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to be more usable with a hearing device’s telecoil (“T Switch” or “Telephone Switch”) than unrated phones. T4 is the better/higher of the two ratings. (Note that not all hearing devices have telecoils in them.) Hearing devices may also be measured for immunity to this type of interference. Your hearing device manufacturer or hearing health professional may help you find results for your hearing device.
Emergency Calls Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), areas where the air contains chemicals or particles, such as grain, dust or metal powders, and any other area where you would normally be advised to turn off your vehicle engine.
FCC Notice and Cautions FCC Notice The phone may cause TV or radio interference if used in close proximity to receiving equipment. The FCC can require you to stop using the phone if such interference cannot be eliminated. Vehicles using liquefied petroleum gas (such as propane or butane) must comply with the National Fire Protection Standard (NFPA-58). For a copy of this standard, contact the National Fire Protection Association, One Batterymarch Park, Quincy, MA 02269, Attn: Publication Sales Division.
Product Performance Product Performance Getting the Most Out of Your Signal Reception The quality of each call you make or receive depends on the signal strength in your area. Your phone informs you of the current signal strength by displaying a number of bars next to the signal strength icon. The more bars displayed, the stronger the signal. If you're inside a building, being near a window may give you better reception.
Availability of Various Features/Ring Tones Many services and features are network dependent and may require additional subscription and/or usage charges. Not all features are available for purchase or use in all areas. Downloadable Ring Tones may be available at an additional cost. Other conditions and restrictions may apply. See your service provider for additional information. Battery Standby and Talk Time Standby and talk times will vary depending on phone usage patterns and conditions.
Care and Maintenance • Do not leave the battery in hot or cold places, such as in a car in summer or winter conditions, as you will reduce the capacity and lifetime of the battery. Always try to keep the battery at room temperature. A phone with a hot or cold battery may temporarily not work, even when the battery is fully charged. Li-ion batteries are particularly affected by temperatures below 0 °C (32 °F).
• Do not store the phone in cold areas. When the phone warms up to its normal operating temperature, moisture can form inside the phone, which may damage the phone's electronic circuit boards. • Do not drop, knock or shake the phone. Rough handling can break internal circuit boards. • Do not use harsh chemicals, cleaning solvents or strong detergents to clean the phone. Wipe it with a soft cloth slightly dampened in a mild soap-and-water solution. • Do not paint the phone.
Section 17: Warranty Information Topics Covered • Standard Limited Warranty Warranty Information 187
Standard Limited Warranty What is Covered and For How Long? SAMSUNG TELECOMMUNICATIONS AMERICA, LLC (“SAMSUNG”) warrants to the original purchaser (“Purchaser”) that SAMSUNG's Phones and accessories (“Products”) are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase and continuing for the following specified period of time after that date: Phone Batteries Leather Case/ Pouch Holster Other Phone Accessories 1 Year 1 Year 90 Days 90
Standard Limited Warranty receipt or comparable substitute proof of sale showing the date of purchase, the serial number of Product and the sellers' name and address. To obtain assistance on where to deliver the Product, call Samsung Customer Care at 1-888-987-4357. Upon receipt, SAMSUNG will promptly repair or replace the defective Product.
KIND RESULTING FROM THE PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR ANY CLAIM BROUGHT AGAINS
Standard Limited Warranty whether oral or written, do not constitute warranties by SAMSUNG and should not be relied upon. Samsung Telecommunications America, LLC 1000 Klein Street Plano, Texas 75074 Phone: 1-800-SAMSUNG Phone: 1-888-987-HELP (4357) ©2007 Samsung Telecommunications America, LLC All rights reserved. No reproduction in whole or in part allowed without prior written approval. Specifications and availability subject to change without notice.
Index A Adjust key tone 148 Ringer setting 23 Axcess Shop 80 Axcess Web 82 How Axcess Web Keys Work 84 Launching Axcess Web 83 Using Axcess Web 84 Using Links 84 B BACK key 18 Backup to last menu 39 Battery 9 Charging 10 Low battery indicator 11 Removal 10 Travel adapter 10 Bluetooth 130 Add New Device 130 Connecting 131 Registered List 131 Settings 131 Turn On/Off 130 C Call Answer mode 21 Call Functions Adjusting the Call Volume 30 Answering a Call 29 192 Call Log 30 Making a Call — Number Entry Diali
Text Message 67 Video Message 70 Understanding this User Manual 8 Voicemail 11 D Display screen icons 20 Display Settings 142 Backlight 145 Banner 145 Contrast 146 Dial Screen 144 Menu Style 143 Theme Color 144 E Emergency Calls 25 END key 19 Entering Text 47 Alpha (Abc) Mode 48 Entering Numbers 50 Entering Symbols 51 Entering Upper and Lower Case Letters 50 Text Entry Modes 48 Erase memos 120 Exit Axcess Web 83 F File Save Options 158 Formatting a Memory Card 162 Formatting a microSD Card 162 G Galler
Messages and Lock Mode 74 Outbox 74 Voicemail 77 Message Send Options 71 Message Setting 78 Messaging 66 Erasing Messages 77 Message Settings 78 microSD Formatting 162 Mode Call answer 21 Input 21 Lock 22 Standby 22 Talk 22 Vibrate 23 Multi shot 95 Multimedia 110 Memo Pad 133 Voice Memo 119 World Time 136 Phone Info 164 Icon Glossary 165 Phone Number 165 Version 165 Phone Memory Freeing 159 161 Usage Info 159 161 Phone Number 165 Photo gallery 107 Photos Sending 108 Picture (Pic) message 68 N Receiving N
Lock Phone 152 Resetting Your Phone 154 Restriction 155 SEND key 19 Send Pic messages 108 Set Time 156 Settings 141 Call 149 Display 142 Key Tone 148 Security 152 Sound 146 Vibrating Alert 149 Setup Location 142 Voicemail 72 Shortcut to menus 39 Shutter sound 101 Sound Settings 146 Alerts 147 Key Tone 148 Ringer Type 147 Vibrating Alert 149 Volume/Vibrate 146 Speakerphone Key 22 Speed Dialing 26 One-Touch Dialing 26 Three Touch Dialing 27 Two-Touch Dialing 27 Standard Limited Warranty 188 Standby mode 22 T
Review memos 119 Voice Service 124 Voicemail 72 Checking 73 Setup 72 VoiceSignal About VoiceSignal 129 Voice Memos 119 W Warranty Information 187 196
