Notebook Computer User Manual

171
Q I cannot nd an AP.
A VerifywhethertheWirelessLANLEDison.
Ifitisturnedoff,turnitonbypressingtheWireless
LANOn/Offbutton(Fn+ ).
Q
The Wireless LAN device is operating properly,
but I cannot connect to the Internet or to another
computer.
► This is due to an incorrect conguration, or a
conguration error. Check the following:
A1 When connecting to a wirelessAd-Hoc network,
checkifthenetworkname(SSID)isthesame.
A2 If a network key (encryption key) isused, theAP
(Access Point)and wirelessAd-Hocnetworkkeys
must be the same. TheAP network key can be
configured using an AP management program.
For more detailed information, ask your network
administrator or product provider.
A3 Check thatthe device driver is installed properly.
If the driver is not properlyinstalled, you will find
a yellow exclamation mark on the network icon
by clicking
Start > Control Panel > System and
Maintenance > Device Manager > Network
Adapter.
Wireless Network (WLAN) Related
 ClickStart > Control Panel > Network and
Internet > Network and Sharing Center >
Manage Network Connections.
 Right-clickontheWirelessNetworkConnections
andselectDisable.
Q
When I am connected to a 100Mbps/1Gbps wired
LAN and the computer exits Sleep/hibernation
mode, a message appears informing you of a
connection to a 10Mbps/100Mbps wired LAN.
A Whenthecomputerexitsstandby/hibernatemode,
restoringthenetworktakesabout3seconds.
Whenthenetworkisrestored,itoperatesat
100Mbps/1Gbps.