HT-E6500W 5.1CH Blu-ray™ Home Entertainment System user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register HT-E6500W_ZA_0417-1(D2D).
Safety Information Warning TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lighting flash and Arrowhead within the triangle is a warning sign alerting you of dangerous voltage inside the product. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE.
Precautions 1 . Read these instructions. Safety Information Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. 14 . Refer all servicing to qualified service personnel.
Safety Information • Do not plug multiple electric devices into the same wall socket. Ovedrloading a socket can cause it to overheat, resulting in a fire. • Maintenance of the Cabinet - Before connecting other components to this product, be sure to turn them off. - If you move your product suddenly from a cold place to a warm place, condensation may occur on the operating parts and lens and cause abnormal disc playback.
License 01 • Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents issued & pending. DTS-HD, the Symbol, & DTSHD and the Symbol together are registered trademarks & DTS-HD Master Audio | Essential is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
Contents SAFETY INFORMATION 2 3 3 3 4 4 5 Warning Precautions Disc Storage & Management Handling Cautions Using the 3D Function Copyright License SETTINGS 22 24 25 26 31 31 36 GETTING STARTED 7 8 11 12 12 13 Disk and Format Compatibility Logos of Discs the product can play Accessories Front Panel Rear Panel Remote Control CONNECTIONS 15 15 16 16 18 18 18 18 19 19 19 20 20 20 20 21 21 21 Attaching the Toroidal Ferrite Core to the Power Cord of the Main Unit Connecting the Speakers Speaker Components
Getting Started Disk and Format Compatibility 02 Disc types and contents your product can play Disc Type Blu-ray Disc 3D Blu-ray Disc VIDEO DVD-VIDEO, DVD-RW, DVD-R, DVD+RW, DVD+R Getting Started Media Details BD-ROM or BD-RE/-R disc recorded in the BD-RE format. DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R discs that have been recorded and finalized, or a USB storage media containing MKV, MP4 contents.
Getting Started Region Code Logos of Discs the product can play Both products and discs are coded by region. These regional codes must match for a disc to play. If the codes do not match, the disc will not play. The Region Number for this product is displayed on the rear panel of the product. Disc Type Blu-ray Disc DVD-VIDEO Region Code Area A North America, Central America, South America, Korea, Japan, Taiwan, Hong Kong and South East Asia.
Video File Support *.avi AVI *.mkv *.asf *.mp4 MP4 *.mpg *.mpeg *.ts *.tp *.trp Frame rate (fps) Bitrate (Mbps) H.264 BP/MP/HP 1920x1080 6 ~ 30 25 MPEG4 SP/ASP 1920x1080 6 ~ 30 8 H.264 BP/MP/HP 1920x1080 6 ~ 30 25 MPEG4 SP/ASP 1920x1080 6 ~ 30 8 H.264 BP/MP/HP 1920x1080 6 ~ 30 25 MPEG4 SP/ASP 1920x1080 6 ~ 30 8 Window Media Video v9 1920x1080 6 ~ 30 25 WMA H.264 BP/MP/HP 1920x1080 6 ~ 30 25 MPEG4 SP/ASP 1920x1080 6 ~ 30 8 MP3 AAC H.
Getting Started - The Seek (skip) function is not available if the file’s index table is damaged. - When you playback a file remotely through a network connection, video playback may stutter depending on the network speed. Video decoder - Supports up to H.264 Level 4.1 - Does not support H.
| NOTE | Some AVCHD format discs may not play, depending on the recording conditions. 02 AVCHD format discs need to be finalized. Getting Started “x.v.Color” offers a wider color range than normal DVD camcorder discs. Some MKV and MP4 format discs may not play, depending on their video resolution and frame rate. Accessories Check for the supplied accessories below.
Getting Started Front Panel VACUUM TUBE AMP VOLUME CONTROL OPEN/CLOSE ENTER PLAY/PAUSE DISC TRAY STOP FUNCTION POWER ASC IN 5V 500mA DISPLAY ASC IN REMOTE CONTROL SENSOR USB HOST | NOTE | If Cellular phone or mobile device is near vacuum tube amp, or put other electronic products on the top of the product would cause noise from the audio. Please be careful that children do not touch the product's surface When the set is on working. It would be hot.
Remote Control 02 Tour of the Remote Control FUNCTION TV SOURCE To change to TV mode, press the TV button. RECEIVER To change to Home Theater, press the BD button. Press numeric buttons to operate options. SLEEP BD To open and close the disc tray. 1 2 3 4 5 6 7 8 9 TITLE MENU 0 Press to view the disc menu. POPUP Press to stop/play a disc. Press to pause a disc. Cut off the sound temporarily. MUTE VOL S/W LEVEL TUNING / CH Press to use Netflix.
Getting Started Installing batteries in the Remote Control Battery size: AAA 1 TV Control Codes Brand Code Brand Code Admiral (M.Wards) 56, 57, 58 Mitsubishi/ MGA 18, 40, 59, 60, 75 A Mark 01, 15 MTC 18 NEC 18, 19, 20, 40, 59, 60 Anam 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14 Nikei 03 Onking 03 AOC 01, 18, 40, 48 Onwa 03 Bell & Howell (M.
Connections This section describes various methods of connecting the product to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord. 03 Attaching the Toroidal Ferrite Core to the Power Cord of the Main Unit SPEAKERS OUT CENTER FRONT SUBWOOFER FRONT SPEAKER IMPEDANCE : 3 iPod LAN WIRELESS 1. Pull the fixing tab of the Toroidal ferrite core to open it. 2. Double loop the main unit power cord. 3.
Connections Speaker Components (L) (R) (L) FRONT (R) SURROUND CENTER SUBWOOFER SPEAKER CABLE SWA-5000 Wireless Receiver Module TX Card Speaker Cable (2EA) Connecting The Speakers 1. Match each speaker cable bundle to the correct speaker by matching the color coded plug on each bundle to the colored sticker on the bottom of each speaker. 2. To attach speaker wire to each speaker: a. Press down the red tab on the back of the speaker, insert the red wire, Black and then release the tab. b.
Center Speaker 03 Subwoofer CENTER FRONT SUBWOOFER FRONT Connections Front Speaker (L) SPEAKERS OUT SPEAKER IMPEDANCE : 3 Front Speaker (R) SPEAKERS OUT CENTER Surround Speaker (L) Surround Speaker (R) FRONT SUBWOOFER FRONT SPEAKER IMPEDANCE : 3 iPod LAN WIRELESS Wireless Receiver Module This product should be connected with the SWA-5000 only.
Connections | NOTE | If you place a speaker near your TV set, the screen color may be distorted because of the magnetic field. Place the wireless receiver module at the rear of the listening position. If the wireless receiver module is too close to the product, sound from the speakers may be disrupted because of interference. If you use a device such as a microwave oven, wireless LAN Card, Bluetooth equipment or any other device that uses the 2.4/5.
Connecting to a TV 03 Select either Method 1 or Method 2. AUX IN Connections • If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote control, and then select the source the product is connected to (HDMI, Video In, etc.) to view video from the home theater.
Connections Connecting to External Devices To select the correct mode for an external device, press the FUNCTION button. Each time you press the button, the mode changes in this order : BD/DVD D. IN AUX R.
Connecting to a Network Router Wireless Network 03 Connections You can connect your product to your network router using one of the methods illustrated below.
Settings The Initial Settings Procedure • The Home menu will not appear if you do not configure the initial settings. • The OSD (On Screen Display) may change in this product after you upgrade the software version. • The access steps may differ depending on the menu you selected. 1 . Turn on your TV after connecting the product, and then turn on the product. When you turn on the product for the first time, the product automatically displays the Initial Settings Language screen.
Initial Settings > Network Settings (4/5) 0 entered - WPS PIN b c d e f 1 2 3 Previous g h i j k l 4 5 6 Next m n o p q r 7 8 9 s t u v w x y z 0 A/a Space Skip 8 . Enter your network's security key. When done, use the ▲▼◄► buttons to select Next, and then press the E button. | NOTE | Enter numbers by pressing the number buttons on your remote. Enter letters by selecting a letter using the ▲▼◄► buttons, and then pressing E button.
Settings The Home Screen Initial Settings > Auto Sound Calibration Connect the calibration microphone to the ASC IN jack and set up all speakers correctly as shown before starting. Note: Please be aware that this process outputs a loud test sound that is needed for proper calibration. AllShare Play Previous Play videos, photos, or music from Disc or connected devices. Place Calibration Mic. Here User Press Next to set the best speaker output level. Press Skip to configure later.
Accessing the Settings Screen 4 EXIT Button : Press to exit the current menu. 3D Settings Display TV Aspect Ratio 16:9 Original Smart Hub Screen Size Audio BD Wise Network System Support Size 3 Settings 3 E (Enter) / DIRECTION Button : ~ Press ▲▼◄► to move the cursor or select an item. ~ Press the E button to activate the currently selected item or confirm a setting. 04 1 . Select Settings on the Home screen, and then press E. The Settings screen appears.
Settings Settings Menu Functions Display 3D Settings Set up the 3D related functions. 3D Blu-ray Playback Mode: Select whether to play a Bluray Disc with 3D contents in 3D Mode. If you move to the Home or Smart Hub Home menu while in 3D mode, the product will switch to 2D automatically. Screen Size: Enter the size of the TV attached to the product. The product will automatically adjust the 3D output to the screen size of the TV.
Audio Speaker Settings You can set the speaker options. 04 Equalizer The product automatically creates a sound field optimized for your environment. See page 31. Lets you configure the Equalizer settings manually. Smart Volume Lets you set the product so that the volume remains stable when a scene change occurs or when you change the channel. Speaker Selection Lets you select which speakers you want active, either the TV's speakers or the Home theater's speakers.
Settings Network Network Settings For more information about Network Settings and network functions, see "Networks and the Internet" starting on page 31. Network Status Lets you check whether a connection to the network and the Internet have been established. Wi-Fi Direct Lets you connect a Wi-Fi Direct device to the product using a Peer-to-Peer network, without a wireless router. You can use the device to control the product.
System Initial Settings Lets you re-run the Initial Settings procedure. See page 22 for details. 04 Settings You can connect a wireless USB keyboard or mouse to the USB port on the front of the product. Keyboard Settings: Lets you configure a wireless USB keyboard connected to the product. | NOTE | You can use the keyboard only when a QWERTY keyboard screen or window appears in the Web Browser. Mouse Settings: Lets you configure a wireless USB mouse connected to the product.
Settings The default PIN is 0000. Enter the default PIN to access the security function if you haven't created your own PIN. Security BD Parental Rating: Prevents playback of Blu-ray Discs with a rating equal to or above a specific age rating you enter unless the PIN is entered. DVD Parental Rating: Prevents playback of DVDs with a rating above a specific numerical rating you select unless the PIN is entered. Change PIN: Change the 4-digit PIN used to access security functions.
Auto Sound Calibration Settings When you connect this product to a network, you can use network based applications and functions such as Smart Hub and BD-LIVE, and upgrade the product's software through the network connection. For more information about accessing and using Internet services, see the Network Services chapter of this manual on pages 51~54. Instructions for configuring the network connection start below.
Settings < Getting the Network Settings Values > Wired - Manual If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually. You can view your Network Settings values on most Windows computers. To view the Network Settings values, follow these steps: After following Steps 1 to 3 above: • In Windows XP 1 . Select Start in the Network Settings screen, and then press the E button. The Network Status screen appears.
Wireless (General) - Automatic Network Settings Select your wireless router from the list: 1/10 iptime23 Refresh ELT WPS(PBC) JSY Previous KT_WLAN_C361 Mirhenge_edu Next Cancel SO070VOIP 2 . Select the desired network, and then press the E button. 3 . Select Next, and then press the E button again. 4 . On the Security screen, enter your network's Security Code or Pass Phrase. Enter numbers directly using the number buttons on your remote control.
Settings 11 . Select the IP Mode field, and then set it to Manual. 12 . Use the number keypad on your remote to enter the Network values. Use the ▲▼◄► buttons on the remote to move from entry field to entry field. | NOTE | You can get these values from your Internet provider. You can also view these values on most Windows computers. For instructions, see "Getting the Network Settings Values." on page 32. 13 . When done, highlight OK, and then press E button. The Network Status screen appears.
1 . On the Soft AP screen, select Security Key, and then press the E button. The Security Key screen appears. 2 . Select PBC, and then press the E button. The PBC pop-up appears. 2 . On the Security key screen, enter a security key. Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with the ▲▼◄► buttons, and then pressing the E button. 3 . Press the PBC button on the Wi-Fi Direct device within 2 minutes. 4 .
Settings Upgrading Software The Software Update menu allows you to upgrade the product’s software for performance improvements or additional services. • Never turn the product off or back on manually during the update process. 4 . If you select Update now, the product upgrades the software, turns off, and then turns on automatically. 5 . If you do not make a selection in one minute or select Update later, the product stores the new upgrade software.
4 . When the update is complete, the product turns off automatically, and then turns on. 1 . Visit www.samsung.com. | NOTE | 2 . Click SUPPORT on the top right of the page. When the system upgrade is done, check the software details in the Software Update menu. 4 . Click Get downloads in the center of the page below the Downloads header. Do not turn off the product during the Software Update. It may cause the product to malfunction. 5 . Click Firmware in the center of the page.
Media Play Your Blu-ray product can play Disc and USB contents and the contents located on your PC, DLNA compatible mobile phone, or NAS using the AllShare Play function. For more information about AllShare Play, refer to page 41. The AllShare Play Screen • Use the ◄► buttons to select an item, press the TOOLS button to display the Tools menu, select Play, and then press the E button. To view or play another item, press the RETURN (') button, and then repeat the process described in the first sentence.
Playing Files on a USB Storage Device or iPod/iPhone 2 . Turn on the product. When the Main screen appears, select AllShare Play > Videos, Photos or Music > Connected Device, and then press the E button. 4 . Using the ▲▼◄► buttons on your remote, select the desired contents. To open a folder, select it, and then press the E button. To play a file, select it, and then press the E button. 5 . Press the RETURN (') button to exit a folder or to return to the Main screen. Media Play 1 .
Media Play The Function Screen On the Function Screen, you can select the audio and/or video input source to view or listen to. | NOTE | You can also change sources by pressing the Function button in the upper right of the remote. Playing Commercial Audio Discs 1 . Place a pre-recorded, commercial audio disc into the disc tray with the disc’s label facing up, and then close the tray. The AllShare Play Music screen appears listing the tracks. Playback of the first track starts automatically.
Playing a Disc with User Recorded Content Using the AllShare Network Function 05 1 . Place a user recorded disc into the disc tray with the disc’s label facing up, and then close the tray. The Device Connected pop-up appears. 2 . Use the ▲▼ buttons to select the type of content you want to view or play - Videos, Photos, or Music - and then press the E button.
Media Play Playing Content Located on Your PC or DLNA Device through the Product Controlling the Playback of Content Located on Your PC with Your Smart Phone PC Product PC Product Play back PC's files Play back PC's files AllShare Connection 1 . Connect the product, your PC, and/or your DLNA compatible cell phone to the same wireless network. 2 . Follow the directions in the AllShare software Installation/Instruction manual to set up devices and files for playing or viewing. 3 .
Controlling Video Playback You can control the playback of video files located on Blu-ray, DVD, and CD discs, and on USB storage devices. Depending on the disc, some of the functions described in this manual may not be available. 05 Buttons on the Remote Control used for Video Playback Media Play DISC MENU TITLE MENU 0 POPUP Using the disc menu, title menu, popup menu and title list DISC MENU During playback, press this button to display the Disc menu.
Media Play Using the TOOLS Menu Menu that appears only when a BD/DVD During playback, press the TOOLS button. disc is playing Title Search Time Search Select to move to a desired title if the disc has more than one title, to a desired scene, or, using Time Search, to a specific point in a movie or video. With Time Search, you designate the specific point by entering a time coordinate in the following format 00:00:00 (hours, minutes, seconds) using the remote.
Shuffling Tracks on an Audio CD Controlling Music Playback Buttons on the Remote Control used for Music Playback 1 . During playback, use the ► button to select in the lower right corner of the screen, and then press the E button. 6 1 2 3 4 5 6 7 8 DISC MENU POPUP 5 1 Creating a Playlist 9 TITLE MENU 0 MUTE 4 2 . Use the ▲▼ to set the Shuffle Mode On or Off, and then press the E button. Media Play You can set the product to play tracks on an audio CD (CD-DA/MP3) at random.
Media Play • Use Select All to select all tracks. This cancels your individual track selections. When you press the RETURN (') button on your remote or select PLAY and then press the E button, all tracks will appear on the Music Playback screen, and the product will begin to play all tracks from Track 001. | NOTE | • Use Deselect All to deselect all selected tracks at once.
| NOTE | To enable the background music function, the photo file must be in the same storage media as the music file. However, the sound quality can be affected by the bitrate of the MP3 file, the size of the photo, and the encoding method. Monthly Appears on the View function screen. Select to sort all photo or video files on a storage device by the month created. Selection Play lets you select specific music, video, and photo files to play. It works essentially the same for all media.
Media Play • Select Create New, and then press the E button. On the keyboard pop-up that appears, create a name for the new playlist. Enter numbers using the numbers on the remote. Enter letters by using the ▲▼◄► buttons to move the cursor, and then pressing the E button. When finished, move to DONE at the bottom of the screen, and then press the E button. Select Send to upload selected files to Picasa, Facebook, Cloud Storage, N Drive, or Family Story.
Displays media file and content information. | NOTE | Depending on the disc or storage device, the Tools menu may differ. All options may not be displayed. Listening to Radio Using Buttons on the Remote Control 1 . Press the FUNCTION button to select FM. 2 . Tune to the desired station. • Preset Tuning 1 : Press the 5 button to select PRESET and then press the TUNING/CH (,.) button to select the preset station.
Media Play Dolby Pro Logic II Movie Music Game Matrix Prologic Off Playing a 2D video in 3D mode • Movie : Adds realism to a movie soundtrack. • Music : When listening to music, you can experience sound effects as if you are listening to the actual performance. • Game : Enhances the excitement of the game’s sound. • Matrix : Select to hear multi channel surround sound. • Prologic : Select to listen to a 2CH sound source in 5.1CH surround sound with all speakers active.
Network Services Smart Hub at a Glance 1 34 Network Services To use network services, you must first: 2 06 You can enjoy various network services such as Smart Hub or BD-LIVE by connecting the product to your network. Search 1 . Connect the product to the network. (See page 21) 2 . Configure the network settings.
Network Services 9 My Applications : Displays your personal gallery of applications which you can add to, modify, and delete. 0 Samsung Apps : Open Samsung Apps to download various for pay or free-of-charge application services. Web Browser at a Glance 1 http://www.google.com/ Using the Web Browser You can access the internet using the Web Browser application which is installed in the Smart Hub screen by default. Google Search b Control Panel Link Browsing / Tools ' Exit 1 .
Once the product is connected to your network, you can enjoy various movie-related service contents available on BD-LIVE compliant discs. Access your movie collection via cloud storage anytime, any place without your DVD disc. Go to www.samsungsupport.com for more detailed information. | NOTE | You can access the Disc to Digital function by pressing the Disc2Digital button on your remote control.
Appendix Additional Information Note HDMI OUT Connections • Certain HDMI output resolutions may not work, depending on your TV. • You must have an HDMI connection to enjoy videos with 3D technology. • A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to Off in the menu. 3D Settings • For some 3D discs, to stop a movie during 3D playback, press the 5 button once. The movie stops and the 3D mode option is de-activated.
Anynet+ (HDMI-CEC) Appendix BD Data Management 07 • Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV. • This function is not available if the HDMI cable does not support CEC. • If your Samsung TV has an Anynet+ logo, then it supports the Anynet+ function. • In the external memory mode, disc playback may be stopped if you disconnect the USB device in the middle of playback. • Only those USB devices formatted in the FAT file system (DOS 8.
Appendix Playing Video files • Video files with high bitrates of 20Mbps or more strain the product’s capabilities and may stop playing during playback. Selecting the Audio Language • The ◄► indicator will not appear on the screen if the BONUSVIEW section does not contain any BONUSVIEW audio settings. • The languages available through the Audio Language function depend on the languages that are encoded on the disc. This function or certain languages may not be available.
Playing Music AllShare Play • You must have the VIDEO output (Composite) connected to your TV to view iPod video (See page 19). • If you want to play iPod video via VIDEO output, set Anynet+ (HDMI-CEC) to off. • Only the playback screen will appear on the TV. View other iPod screens on the iPod player. • If you want to return to the iPod menus while the iPod player is connected using the dock, press FUNCTION on the remote control or press on the front panel of the system and select R. IPOD.
Appendix Resolution according to the output mode Blu-ray Disc/E-contents/Digital Contents playback HDMI/connected Output Setup HDMI/not connected HDMI Mode Blu-ray Disc E-contents/ Digital contents VIDEO Mode VIDEO Mode BD Wise Resolution of Bluray Disc 1080p@60F 480i - Auto Max. Resolution of TV input Max.
Digital Output Selection PCM Bitstream (Re-encoded Dolby D) HDMI supported AV receiver PCM Up to PCM 7.1ch PCM DTS re-encoded Re-encoded Dolby Digital * Dolby Digital Up to PCM 7.1ch Dolby Digital DTS re-encoded Re-encoded Dolby Digital * Dolby Digital Plus Up to PCM 7.1ch Dolby Digital Plus DTS re-encoded Re-encoded Dolby Digital * Up to PCM 7.1ch Dolby TrueHD DTS re-encoded Re-encoded Dolby Digital * Up to PCM 6.
Appendix Troubleshooting Refer to the table below when this product does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the product, disconnect the power cord, and contact Samsung Electronics at 1-800-SAMSUNG (1-800-726-7864). Symptom Check/Remedy I cannot eject the disc. • Is the power cord plugged securely into the outlet? • Turn off the power and then turn it back on. The iPod fails to connect.
Symptom • The product is not working. (Example: The power goes out or a strange noise is heard.) • You can play 16:9 Blu-ray/DVD discs in 16:9 Full mode, 4:3 Letter Box mode, or 4:3 Pan-Scan mode, but 4:3 Blu-ray/DVD discs are played in 4:3 ratio only. Refer to the Blu-ray Disc jacket and then select the appropriate function. Appendix The aspect ratio cannot be changed. • Are you using a disc that does not contain menus? 07 The menu screen does not appear even when the menu function is selected.
Appendix Symptom Check/Remedy AllShare Play function I can see folders shared through AllShare Play, but I cannot see the files. • AllShare Play shows only files corresponding to the Photo, Music, and Movie categories. Files that do not correspond to these categories may not be displayed. Video is played intermittently. • Check if the network is stable. • Check if the network cable is properly connected and if the network is not overloaded.
Specifications FM Tuner 127.7 W Weight 8.6 Ibs Dimensions 16.93 (W) x 2.56 (H) x 12.74 (D) inches Operating Temperature Range +41°F to +95°F Operating Humidity Range 10 % to 75 % Signal/noise ratio 55 dB Usable sensitivity 12 dB Total harmonic distortion 0.5 % BD (Blu-ray Disc) Reading Speed : 9.
Appendix 5.1ch speaker system Speaker system Speaker Front Surround Center Subwoofer Impedance 3Ω 3Ω 3Ω 3Ω Frequency range 140Hz~20kHz 140Hz~20kHz 140Hz~20kHz 40Hz ~ 160Hz Output sound pressure level 87dB/W/M 87dB/W/M 87dB/W/M 88dB/W/M Rated input 165W 165W 170W 170W Maximum input 330W 330W 340W 340W Dimensions (W x H x D) Front : 3.7 x 11.02 x 2.75 inches Surround : 3.54 x 5.57 x 2.69 inches Center : 14.17 x 2.93 x 2.69 inches Subwoofer : 6.61 x 13.78 x 11.
LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of: One (1) Year Parts and Labor* (*90 Days Parts and Labor for Commercial Use) This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States.
QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT WRITE IN THE US 1-800-SAMSUNG (726-7864) www.samsung.com Samsung Electronics America, Inc. 85 Challenger Road Ridgefield Park, NJ 07660-2112 AH68-02463A-03 HT-E6500W_ZA_0417-1(D2D).
