HT-E5500 HT-E5530 HT-E5550 5.1CH Blu-ray™ Home Entertainment System user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register HT-E5500_XU_0223.
Safety Information Warning TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Disc Storage & Management 01 Safety Information • Holding Discs - Fingerprints or scratches on a disc may reduce sound and picture quality or cause skipping. - Avoid touching the surface of a disc where data has been recorded. - Hold the disc by the edges so that fingerprints will not get on the surface. - Do not stick paper or tape on the disc. • Cleaning Discs - If you get fingerprints or dirt on a disc, clean it with a mild detergent diluted in water and wipe with a soft cloth.
Safety Information • Do not use the 3D function or 3D Active Glasses while walking or moving around. Using the 3D function or 3D Active Glasses while moving around may cause you to bump into objects, trip, and/or fall, and cause serious injury. • If you want to enjoy 3D content, connect a 3D device (3D compliant AV receiver or TV) to the product’s HDMI OUT port using a high-speed HDMI cable. Put on 3D glasses before playing the 3D content.
Safety Information • Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. • Open Source Licence Notice - In the case of using open source software, Open Source Licences are available on the product menu. 01 • The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Contents SAFETY INFORMATION 2 3 3 3 4 4 Warning Disc Storage & Management Handling Cautions Using the 3D Function Copyright Licence 7 8 11 12 12 13 Disk and Format Compatibility Logos of Discs the product can play Accessories Front Panel Rear Panel Remote Control GETTING STARTED CONNECTIONS 15 15 16 17 17 18 20 20 20 20 21 21 21 22 22 22 22 Attaching the Toroidal Ferrite Core to the Power Cord of the Main Unit Connecting the Speakers Speaker Components Installing the Speakers on the Tallboy Stand Conn
Getting Started Disk and Format Compatibility 02 Disc types and contents your product can play Disc Type Blu-ray Disc 3D Blu-ray Disc VIDEO DVD-VIDEO, DVD-RW, DVD-R, DVD+RW, DVD+R Details BD-ROM or BD-RE/-R disc recorded in the BD-RE format. DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R discs that have been recorded and finalised, or a USB storage media containing DivX, MKV, MP4 contents.
Getting Started Region Code Logos of Discs the product can play Both products and discs are coded by region. These regional codes must match for a disc to play. If the codes do not match, the disc will not play. The Region Number for this product is displayed on the rear panel of the product. Disc Type Blu-ray Disc DVD-VIDEO Region Code Area A North America, Central America, South America, Korea, Japan, Taiwan, Hong Kong and South East Asia.
Video File Support *.avi AVI *.mkv MKV *.asf ASF *.wmv WMV (wmv9) *.mp4 MP4 *.3gp 3GPP *.vro *.mpg *.mpeg *.ts *.tp *.trp Video Codec Resolution Frame rate (fps) Bit rate (Mbps) DivX 3.11/4.x /5.1/6.0 1920x1080 6 ~ 30 8 MP3 AC3 LPCM DTS Core H.264 BP/MP/HP 1920x1080 6 ~ 30 25 MPEG4 SP/ASP 1920x1080 6 ~ 30 8 DivX 3.11/4.x /5.1/6.0 1920x1080 6 ~ 30 8 H.264 BP/MP/HP 1920x1080 6 ~ 30 25 MPEG4 SP/ASP 1920x1080 6 ~ 30 8 DivX 3.11/4.x /5.1/6.0 1920x1080 6 ~ 30 8 H.
Getting Started - The Seek (skip) function is not available if the file’s index table is damaged. - When you playback a file remotely through a network connection, video playback may stutter depending on the network speed. Video decoder - Supports up to H.264 Level 4.1 - Does not support H.
| NOTE | Some AVCHD format discs may not play, depending on the recording conditions. 02 AVCHD format discs need to be finalised. Getting Started “x.v.Colour” offers a wider colour range than normal DVD camcorder discs. Some DivX, MKV and MP4 format discs may not play, depending on their video resolution and frame rate. Accessories Check for the supplied accessories below.
Getting Started Front Panel PLAY/PAUSE ENTER STOP OPEN/CLOSE VOLUME CONTROL FUNCTION 5V 500mA DISPLAY DISC TRAY POWER USB HOST REMOTE CONTROL SENSOR | NOTE | To upgrade the product's software through the USB Host jack, you must use a USB memory stick. When the product displays the Blu-ray Disc menu, you cannot start the movie by pressing the 6 button on the product or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the E button.
Remote Control 02 Tour of the Remote Control FUNCTION TV SOURCE To change to TV mode, press the TV button. Press numeric buttons to operate options. SLEEP BD TV RDS DISPLAY TA 1 2 3 PTY- PTY SEARCH PTY+ 4 5 6 7 8 TITLE MENU Press to view the disc menu. 0 POPUP Press to stop/play a disc. MUTE VOL S/W LEVEL TUNING / CH Press to move to the Home screen. FULL SCREEN HOME REPEAT Press this to see the full screen on a TV.
Getting Started Installing batteries in the Remote Control Battery size: AAA 1 2 | NOTE | Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment. Assuming typical TV usage, the batteries last for about one year. The remote control can be used up to approximately 7 meters from the product in a straight line. Setting the Remote Control You can control certain functions of your TV with this remote control.
Connections This section describes various methods of connecting the product to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord. 03 SPEAKERS OUT SURROUND IMPEDANCE : 3 If you attach a Toroidal ferrite core to the power cord of the main unit, it will help to prevent RF interference from radio signals. SURROUND iPod LAN WIRELESS HDMI Connections Attaching the Toroidal Ferrite Core to the Power Cord of the Main Unit 1.
Connections Speaker Components HT-E5500 (L) (R) (L) FRONT (R) CENTRE SURROUND SUBWOOFER SPEAKER CABLE HT-E5530 SCREW (5X20): 6EA (L) (R) SCREW (5X15): 2EA STAND BASE (L) FRONT STAND (R) SURROUND SPEAKER CABLE CENTRE SUBWOOFER HT-E5550 SCREW (5X20): 12EA STAND (L) (R) FRONT STAND BASE (L) SPEAKER CABLE SCREW (5X15): 4EA CENTRE SUBWOOFER (R) SURROUND | 16 English HT-E5500_XU_0223.
Installing the Speakers on the Tallboy Stand 1 Stand Base Connections 1. Turn the Stand Base upside-down and connect it to the Stand. 2. Use the driver to combine the screws (5x20) on the 3 marked holes. 03 * HT-E5530 only - Front Speakers * HT-E5550 only - Front/Surround Speakers 2 Stand 3. Straighten a supplied speaker wire and put in the hole on the centre of Stand Base. 4. Connect the upper Speaker to the assembled Stand. 3 4 Speaker Stand 5.
Connections In case of HT-E5500 Front Speaker (L) Surround Speaker (L) Centre Speaker SPEAKERS OUT IMPEDANCE : 3 Surround Speaker (R) SURROUND SURROUND Front Speaker (R) SURROUND Subwoofer IMPEDANCE : 3 SPEAKERS OUT SURROUND iPod LAN WIRELESS HDM Refer to page 16 for the speakers of HT-E5530/HT-E5550. Connecting the Optional Wireless Receiver Module To connect the surround speakers wirelessly, you have to purchase the wireless receiver module and TX card from your Samsung retailer.
1. Follow the 1 to 3 steps as shown on the previous page. 03 LAN WIRELESS HDMI OUT • The TX card enables communication between the product and the wireless receiver module. 3. Connect the left and right surround speakers to the wireless receiver module. Again, match the colour of the plugs to the jacks on the wireless receiver module. TX card Connections 2. With the product turned off, insert the TX card into the TX Card Connection (WIRELESS) on the back of the product.
Connections Connecting the FM Antenna FM Antenna (supplied) AUX IN SURROUND VIDEO OU OUT IMPEDANCE : 3 SPEAKERS OUT SURROUND OPTICAL iPod LAN WIRELESS HDMI OUT HDMI IN 1 DIGITAL AUDIO IN N 2 FM ANT 1 . Connect the FM antenna supplied to the FM ANTENNA Jack. 2 . Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface. | NOTE | This product does not receive AM broadcasts.
Connecting to a TV 03 Select either Method 1 or Method 2. AUX IN AUX IN SURROUND VIDEO OUT VIDEO OUT IMPEDANCE : 3 SPEAKERS OUT Connections • If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote control, and then select the correct external source from the TV's source list (HDMI, Video In, etc.) to view video from the home cinema.
Connections Connecting to External Devices To select the correct mode for an external device, press the FUNCTION button. Each time you press the button, the mode changes in this order : BD/DVD D. IN AUX R. IPOD HDMI1 HDMI2 FM BT R W Red AUX IN White AUX IN SURROUND VIDEO OUT IMPEDANCE : 3 SPEAKERS OUT VIDEO OUT OPTICAL SURROUND OPTICAL iPod LAN WIRELESS HDMI OUT 1 HDMI IN 2 DIGITAL AUDIO IN 1 FM ANT HDMI IN DIGITAL AUDIO IN 2 FM ANT (Cable not supplied.
Connecting to a Network Router Wireless Network 03 Connections You can connect your product to your network router using one of the methods illustrated below.
Settings The Initial Settings Procedure • The Home menu will not appear if you do not configure the initial settings. • The OSD (On Screen Display) may change in this product after you upgrade the software version. • The access steps may differ depending on the menu you selected. 1 . Turn on your TV after connecting the product, and then turn on the product. When you turn on the product for the first time, the product automatically displays the Initial Settings Language screen.
| NOTE | To display capital letters (or redisplay small letters if capital letters are displayed), select A/a, and then press the E button. To display symbols and punctuation, select , and then press the E button. To redisplay letters, select , and then press the E button. 9 . If the connection is successful, the Connection Complete screen appears. Select Next, and then press the E button. The Software Update screen appears.
Settings 2 . To access the menus, sub-menus, and options on the Settings screen, please refer to the remote control illustration below. The Home Screen | NOTE | AllShare Play Play videos or music, or view photos from discs or connected devices. 2 3 4 1 Smart Hub Function Settings d WPS(PBC) 5 1 Smart Hub. Starts Smart Hub. From Smart Hub, you can access YouTube, games, and other apps. 2 AllShare Play. Play videos, photos or music content from Disc, USB, PC or mobile devices. 3 Function.
Settings Menu Functions TV Aspect Ratio Lets you adjust the output of the product to the screen size of your TV. See page 25, Step 12 for a description of the screen size options. Smart Hub Screen Size Lets you select the optimal size for the Smart Hub Screen. BD Wise BD Wise is Samsung’s latest inter-connectivity feature.
Settings Audio Speaker Settings You can set the speaker options. Equaliser Let you configure the Equaliser settings manually. Smart Volume Lets you set the product so that the volume remains stable when a scene change occurs or when you change the channel. Speaker Selection Lets you select which speakers you want active, either the TV's speakers or the Home theater's speakers. Audio Return Channel Lets you direct the sound from the TV to the Home Cinema speakers.
Network Network Status Let you check whether a connection to the network and the Internet have been established. Wi-Fi Direct Lets you connect a Wi-Fi Direct device to the product using a Peer-to-Peer network, without a wireless router. You can use the device to control the product. Soft AP Lets you connect other types of Wi-Fi devices to the product wirelessly. Requires that you create a security key which you must enter into the other Wi-Fi devices when you are connecting them to the network.
Settings System Initial Settings Lets you re-run the Initial Settings procedure. See page 24 for details. You can connect a wireless USB keyboard or mouse to the USB port on the front of the product. Keyboard Settings: Lets you configure a wireless USB keyboard connected to the product. | NOTE | You can use the keyboard only when a QWERTY keyboard screen or window appears in the Web Browser. Mouse Settings: Lets you configure a wireless USB mouse connected to the product.
The default PIN is 0000. Enter the default PIN to access the security function if you haven't created your own password. 04 Settings Security BD Parental Rating: Prevents playback of Blu-ray Discs with a rating equal to or above a specific age rating you enter unless the PIN is entered. DVD Parental Rating: Prevents playback of DVDs with a rating above a specific numerical rating you select unless the PIN is entered. Change PIN: Change the 4-digit PIN used to access security functions.
Settings Networks and the Internet When you connect this product to a network, you can use network based applications and functions such as Smart Hub and BD-LIVE, and upgrade the product's software through the network connection. For more information about accessing and using Internet services, see the Network Services chapter of this manual on pages 54~56. Instructions for configuring the network connection start below.
2 . In the pop-up menu, click Status. Network Settings Select your wireless router from the list. Refresh Previous KT_WLAN_C361 Mirhenge_edu Depending on your Windows version, the information may differ.
Settings 4 . If you select the Add Network, enter your wireless router's name to connect. Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with the ▲▼◄► buttons, and then pressing the E button. Select Next, and then press the E button again. You can select security type, and then select Next, and then press the E button again. 5 . On the Security screen, enter your network's Security Code or Pass Phrase.
Soft AP lets you connect other Wi-Fi devices to your network through the product and lets them access the Internet. It requires that you create a security key which you must enter into the other Wi-Fi devices when you are connecting them to the network. 2 . When you have completed the procedure, you should see a pop-up on your TV screen saying that a device that supports Wi-Fi Direct has requested to connect. Select OK, and then press the E button to accept. 1 .
Settings 3 . Select AllShare Settings, and then press the E button. 4 . Select a device, and then press the E button. The AllShare Settings pop-up appears. 5 . Select Allow, Deny, or Delete from List, and then press the E button. The AllShare Settings screen only displays devices if you have established networked connections to AllShare devices. For more information about AllShare networked devices, see pages 38~39.
11 . In the product’s menu, go to Settings > Support > Software Update. There should be no disc in the product when you upgrade the software using the USB Host jack. When the Software Update is done, check the software details in the Software Update menu. Do not turn off the product during the Software Update. It may cause the product to malfunction. 1 . If upgrade software has been downloaded, you will see the software version number to the right of By downloaded. 2 .
Media Play Your Blu-ray product can play Disc and USB contents and the contents located on your PC, DLNA compatible mobile phone, or NAS using the AllShare Play function. For more information about AllShare Play, refer to page 41. The AllShare Play Screen • Use the ◄► buttons to select an item, press the TOOLS button to display the Tools menu, select Play, and then press the E button. To view or play another item, press the RETURN (') button, and then repeat the process described in the first sentence.
Playing Files on a USB Storage Device or iPod/iPhone 2 . Turn on the product. When the Main screen appears, select AllShare Play > Videos, Photos or Music > Connected Device, and then press the E button. 4 . Using the ▲▼◄► buttons on your remote, select the desired contents. To open a folder, select it, and then press the E button. To play a file, select it, and then press the E button. 5 . Press the RETURN (') button to exit a folder or to return to the Main screen. Media Play 1 .
Media Play The Function Screen On the Function Screen, you can select the audio and/or video input source to view or listen to. | NOTE | You can also change sources by pressing the Function button in the upper right of the remote. Playing Commercial Audio Discs 1 . Place a pre-recorded, commercial audio disc into the disc tray with the disc’s label facing up, and then close the tray. The AllShare Play Music screen appears listing the tracks. Playback of the first track starts automatically.
Playing a Disc with User Recorded Content Using the AllShare Network Function 2 . Use the ▲▼ buttons to select the type of content you want to view or play - Videos, Photos, or Music - and then press the E button. AllShare lets you play Videos, Photos, or Music located on your PC or your DLNA compatible device through the product using a wireless network connection.
Media Play Playing Content Located on Your PC or DLNA Device through the Product Controlling the Playback of Content Located on Your PC with Your Smart Phone PC Product PC Product 5V 500mA Play back PC's files 5V 500mA Play back PC's files AllShare Connection 1 . Connect the product, your PC, and/or your DLNA compatible cell phone to the same wireless network. 2 . Follow the directions in the AllShare software Installation/Instruction manual to set up devices and files for playing or viewing. 3 .
Controlling Video Playback You can control the playback of video files located on Blu-ray, DVD, and CD discs, and on USB storage devices. Depending on the disc, some of the functions described in this manual may not be available. 05 Buttons on the Remote Control used for Video Playback Media Play DISC MENU TITLE MENU 0 POPUP Using the disc menu, title menu, popup menu and title list DISC MENU During playback, press this button to display the Disc menu.
Media Play Using the TOOLS Menu Menu that appears only when BD/DVD disc During playback, press the TOOLS button. plays Title Search Time Search Select to move to a desired title if the disc has more than one title, to a desired scene, or, using Time Search, to a specific point in a movie or video. With Time Search, you designate the specific point by entering a time coordinate in the following format 00:00:00 (hours, minutes, seconds) using the remote.
Shuffling Tracks on an Audio CD Controlling Music Playback Buttons on the Remote Control used for Music Playback 1 . During playback, use the ► button to select in the lower right corner of the screen, and then press the E button. RDS DISPLAY 6 2 3 PTY SEARCH PTY+ 4 5 6 7 8 DISC MENU POPUP 5 1 Creating a Playlist 9 TITLE MENU 0 MUTE 4 2 . Use the ▲▼ to set the Shuffle Mode On or Off, and then press the E button.
Media Play • Use Select All to select all tracks. This cancells your individual track selections. When you press the RETURN (') button on your remote or select PLAY and then press the E button, all tracks will appear on the Music Playback screen, and the product will begin to play all tracks from Track 001. • Use Deselect All to deselect all selected tracks at once.
To connect the Home Cinema to a Bluetooth device Bluetooth device Check if the Bluetooth device supports the Bluetoothcompliant stereo headset function. 1 . Press the FUNCTION button on the remote control of product to display the BT message. • You will see WAIT for 2 seconds and then READY on the front display of the Home Cinema. 2 . Select the Bluetooth menu on Bluetooth device you want to connect. (refer to Bluetooth device's user manual) 3 . Select the Stereo headset menu on the Bluetooth device.
Media Play Playing Photo Contents You can play photo contents located on a DVD, USB, mobile device or PC. Using the Tools Menu During playback, press the TOOLS button. Go to Photos List Select to go to the list of photos on the current media. Start Slide Show Select to start the slide show. Slide Show Speed Select to set a slide show's speed. Slide Show Effect Select to set a slide show's special effects. Background Music On Select to listen to music while viewing a slide show.
Appears on the View function screen. Select to sort all photo or video files on a storage device by the month created. Play selection lets you select specific music, video, and photo files to play. It works essentially the same for all media. The example below is for photos. Send 2. Repeat for each track or file you want to upload. | NOTE | 1. On the Thumbnail View screen, highlight a photo, and then press the TOOLS button on the remote.
Media Play Add to Playlist (Continued) • Select Create new, and then press the E button. On the keyboard pop-up that appears, create a name for the new playlist. Enter numbers using the numbers on the remote. Enter letters by using the ▲▼◄► buttons to move the cursor, and then pressing the E button. When finished, move to DONE at the bottom of the screen, and then press the E button.
Presetting Stations 1 . Press the FUNCTION button to select FM. 3 . Press the TUNER MEMORY button. • NUMBER flashes on the display. 4 . Press the TUNER MEMORY button again. • Press the TUNER MEMORY button before NUMBER disappears from the display on its own. • After you press the TUNER MEMORY button, NUMBER disappears from the display and the station is stored in memory. 5 . To preset another station, repeat steps 2 to 4. • To tune in to a preset station, press the TUNING/CH (,.) button.
Media Play PTY (Program Type) indication and PTY-SEARCH function One of the advantages of the RDS service is that you can locate a particular kind of program from the preset channels by specifying the PTY codes. To search for a program using the PTY codes Before you start! • The PTY Search is only applicable to preset stations. • To stop searching any time during the process, press 5 button while searching. • There is a time limit in doing the following steps.
05 • Symphony Hall in Boston (Hall 1) : Also provides a clear vocal as if you are listening in a concert hall but, less powerful than HALL1. • Philharmonic Hall in Bratislava (Hall 2) : This also helps enhance your sound experience (ex. mp3 music). You can upscale your MP3 level sound (24 kHz, 8bit) to CD level sound (44.1 kHz, 16bit). • Jazz Club in Seoul B : Recommended setting for Jazz. • Church in Seoul : Gives the feel of being in a grand church. • Amphitheater (Rock) : Recommended setting for Rock.
Network Services You can enjoy various network services such as Smart Hub or BD-LIVE by connecting the product to your network. Smart Hub at a Glance 1 To use network services, you must first: 2 34 Search 1 . Connect the product to the network. (See page 23) 2 . Configure the network settings.
0 Samsung Apps : Open Samsung Apps to download various for pay or free-of-charge application services. Web Browser at a Glance 1 Network Services My Applications : Displays your personal gallery of applications which you can add to, modify, and delete. 07 9 http://www.google.com/ Using the Web Browser You can access the internet using the Web Browser application which is installed in the Smart Hub screen by default. Google Search b Control Panel Link Browsing / Tools ' Exit 1 .
Network Services 2 Navigation Help : Displays the remote control buttons you can use to navigate in Web Browser. • GREEN (B) : To display the Control Panel. • YELLOW (C) : To search a link. • Tools : To display Tools window. • Exit : To return to the previous menu. BD-LIVE™ Once the product is connected to your network, you can enjoy various movie-related service contents available on BD-LIVE compliant discs. 1 .
Appendix Additional Information 07 Note Connections • Certain HDMI output resolutions may not work, depending on your TV. • You must have an HDMI connection to enjoy videos with 3D technology. • A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour to Off in the menu. Appendix HDMI OUT 3D Settings • For some 3D discs, to stop a movie during 3D playback, press the 5 button once. The movie stops and the 3D mode option is de-activated.
Appendix Anynet+ (HDMI-CEC) • Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV. • This function is not available if the HDMI cable does not support CEC. • If your Samsung TV has an Anynet+ logo, then it supports the Anynet+ function. BD Data Management • In the external memory mode, disc playback may be stopped if you disconnect the USB device in the middle of playback. • Only those USB devices formatted in the FAT file system (DOS 8.
Selecting the Subtitle Language 07 Appendix Playback • Depending on the Blu-ray Disc / DVD, you may be able to change the subtitle language in the Disc Menu. Press the DISC MENU button. • This function depends on the selection of subtitles that are encoded on the disc and may not be available on all Blu-ray Discs/DVDs. • Information about the main feature BONUSVIEW mode will also appear if the Blu-ray Disc has a BONUSVIEW section.
Appendix iPod/iPhone Models You Can Use with This Product iPod • The volume control may not operate normally with iPod and iPhone models not listed on page 39. If you have a problem with any of the models listed above, please update the software of the iPod/iPhone to the lastest version. • Depending on the software version of the iPod, control problems may occur. This is not a malfunction of the Home Cinema. • Depending on the software version or the type of iPod, some operations may differ.
Resolution according to the output mode Blu-ray Disc/E-contents/Digital Contents playback 07 Setup HDMI/not connected HDMI Mode Blu-ray Disc E-contents/ Digital contents VIDEO Mode VIDEO Mode BD Wise Resolution of Bluray Disc 1080p@60F 576i/480i - Auto Max. Resolution of TV input Max.
Appendix Digital Output Selection Setup PCM Connection Audio Stream on Blu-ray Disc Audio Stream on DVD Bitstream (Unprocessed) Bitstream (Re-encoded DTS) Bitstream (Re-encoded Dolby D) HDMI supported AV receiver PCM Up to PCM 7.1ch PCM DTS re-encoded Re-encoded Dolby Digital * Dolby Digital Up to PCM 7.1ch Dolby Digital DTS re-encoded Re-encoded Dolby Digital * Dolby Digital Plus Up to PCM 7.1ch Dolby Digital Plus DTS re-encoded Re-encoded Dolby Digital * Dolby TrueHD Up to PCM 7.
Troubleshooting Check/Remedy I cannot eject the disc. • Is the power cord plugged securely into the outlet? • Turn off the power and then turn it back on. The iPod fails to connect. • Check the condition of the iPod connector and Dock. • Keep the iPod software version up to date. Playback does not start. • Check the region number of the Blu-ray/DVD disc. Blu-ray/DVD disc purchased from abroad may not be playable. • CD-ROMs and DVD-ROMs cannot be played on this product.
Appendix Symptom The menu screen does not appear even when the menu function is selected. The aspect ratio cannot be changed. • The product is not working. (Example: The power goes out or a strange noise is heard.) Check/Remedy • Are you using a disc that does not contain menus? • You can play 16:9 Blu-ray/DVD discs in 16:9 Full mode, 4:3 Letter Box mode, or 4:3 Pan-Scan mode, but 4:3 Blu-ray/DVD discs are played in 4:3 ratio only. Refer to the Blu-ray Disc jacket and then select the appropriate function.
Symptom Check/Remedy 07 AllShare Play function • AllShare Play shows only files corresponding to the Photo, Music, and Movie categories. Files that do not correspond to these categories may not be displayed. Video is played intermittently. • Check if the network is stable. • Check if the network cable is properly connected and if the network is not overloaded. • The wireless connection between the server and the product is unstable. Check the connection.
Appendix Specifications Weight General FM Tuner 430 (W) x 55 (H) x 255.8 (D) mm Operating Temperature Range +5°C to +35°C Operating Humidity Range 10 % to 75 % Signal/noise ratio 55 dB Usable sensitivity 12 dB Total harmonic distortion 0.5 % BD (Blu-ray Disc) Reading Speed : 9.834 m/sec DVD (Digital Versatile Disc) Disc CD : 12cm (COMPACT DISC) CD : 8cm (COMPACT DISC) Video Output Video/Audio Amplifier 2.5 kg Dimensions Composite Video HDMI Reading Speed : 6.98 ~ 7.68 m/sec. Approx.
5.1ch speaker system Speaker system Surround Centre Subwoofer Impedance 3Ω 3Ω 3Ω 3Ω Frequency range 140Hz~20kHz 140Hz~20kHz 140Hz~20kHz 40Hz ~ 160Hz Output sound pressure level 87dB/W/M 87dB/W/M 87dB/W/M 88dB/W/M Rated input 165W 165W 170W 170W Maximum input 330W 330W 340W 340W 07 Front Appendix (Unit : mm) HT-E5500 Front Surround Centre 90 x 207.5 x 68.5 90 x 141.5 x 68.5 360 x 74.5 x 68.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Area ` Europe Albania Austria Contact Centre 42 27 5755 0810 - SAMSUNG (7267864, € 0.07/min) 02-201-24-18 Bosnia Bulgaria Croatia 05 133 1999 07001 33 11 062 SAMSUNG (062 726 7864) 800-SAMSUNG (800-726786) Samsung Zrt.
