HT-D7100 2.1CH Blu-ray™ Home Entertainment System user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register HT-D7100_ELS_0221.
Safety Information Safety Warnings TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates “dangerous CAUTION : TO PREVENT ELECTRIC voltage” inside the product that presents SHOCK, MATCH WIDE BLADE OF PLUG a risk of electric shock or personal injury. TO WIDE SLOT, FULLY INSERT.
Precautions • Ensure that the AC power supply in your house complies with the identification sticker located on the back of your product. • Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (7.5~10cm). • Do not place the product on amplifiers or other equipment which may become hot. Make sure the ventilation slots are not covered. • Do not stack anything on top of the product. • Before moving the product, ensure the Disc Insert Hole is empty.
Safety Information Cautions on Handling and Storing Discs Small scratches on the disc may reduce sound and picture quality or cause skipping. Be especially careful not to scratch discs when handling them. Holding discs • Do not touch the playback side of the disc. • Hold the disc by the edges so that fingerprints will not get on the surface. • Do not stick paper or tape on the disc. Disc Storage • Do not keep in direct sunlight • Keep in a cool ventilated area • Keep in a clean Protection jacket.
Contents Safety Warnings Precautions Cautions on Handling and Storing Discs Licence Copyright GETTING STARTED 7 8 12 13 13 14 15 Icons that will be used in manual Disc Types and Characteristics Accessories Description Front Panel Rear Panel Remote Control CONNECTIONS 17 20 21 22 23 Connecting the Speakers Connecting the Video Out to your TV Connecting the FM Antenna Connecting an External Digital Component Connecting to the Network SETUP 25 26 27 27 28 28 28 28 30 30 30 30 30 31 31 31 32 32 32 34 34
Contents SETUP 39 39 39 39 39 39 39 40 40 41 Security BD Parental Rating DVD Parental Rating Change Password General Front Display Network Remote Control Support Software Upgrade Contact Samsung BASIC FUNCTIONS 42 42 43 44 44 45 47 49 50 51 51 54 54 55 56 Playing a Disc Using the Disc menu / Title menu / Popup menu Using the Search and Skip Functions Slow Motion Play/Step Motion Play Repeat Playback Using the TOOLS button Listening to Music Sound Mode Playing back a Picture Playing back a USB Storage D
01 Getting Started Getting Started Icons that will be used in manual Make sure to check the following terms before reading the user manual. Term Logo Icon h z Z BD-ROM BD-RE/-R DVD-VIDEO Definition This involves a function available on a BD-ROM. This involves a function available on a BD-RE/-R disc recorded in the BD-RE format. This involves a function available on a DVD-VIDEO.
Getting Started Disc Types and Characteristics Logos of Discs that can be played Blu-ray Disc Compatibility Blu-ray is a new and evolving format. Accordingly, disc compatibility issues are possible. Not all discs are compatible and not every disc will play back. For additional information, refer to the Disc Types and Characteristics section of this Manual. Blu-ray Disc 3D Blu-ray Disc Dolby Digital Plus PAL broadcast system in U.K, France, Germany, etc.
01 BD-RE/-R Both the product and the discs are coded by region. These regional codes must match in order to play the disc. If the codes do not match, the disc will not play. This Blu-ray disc can be recorded and played back. This product can play back a BD-RE/-R disc recorded by other compatible Blu-ray disc recorders. Getting Started Region Code DVD-VIDEO Disc Type Region Code Area A North America, Central America, South America, Korea, Japan, Taiwan, Hong Kong and South East Asia.
Getting Started Disc Format Using JPEG disc • CD-R/-RW, DVD-RW/-R recorded with UDF or JOLIET format can be played back. • Only JPEG files with the ".jpg", ".JPG", ".jpeg" or "JPEG" extension can be displayed. • Progressive JPEG is supported. DVD-RW/-R (V) • This is a format that is used for recording data on a DVD-RW or DVD-R disc. The disc can be played by this product once it has been finalised.
01 Container *.vro VRO VOB Video Codec Audio Codec Resolution MPEG2 AC3 MPEG LPCM 1920x1080 AC3 MPEG LPCM AAC 352x288 MPEG1 MPEG1 *.mpg *.mpeg MPEG2 PS H.264 1920x1080 1920x1080 AC3 AAC MP3 DD+ HE-AAC MPEG2 *.ts *.tp *.trp 352x288 H.264 TS VC1 Getting Started File Extension 1920x1080 1920x1080 1920x1080 Restrictions • • • • • Some of the Codecs above listed are not supported if having a problem with the contents.
Getting Started Notes on USB connection Supported devices: USB storage media, MP3 player, digital camera, USB card reader 1) Does not support if a folder or file name is longer than 125 characters. 2) A subtitle file bigger than 300 KB may not be properly displayed. 3) A certain USB/digital camera device may not be compatible with the product. 4) FAT16 and FAT32 file systems are supported. 5) Photo (JPEG), music (MP3) and video file should have their names in Korean or English.
01 Getting Started Description Front Panel VOL 1 2 3 4 5 6 7 8 9 10 1 POWER BUTTON ( 2 FUNCTION BUTTON The mode switches as follows : BD/DVD D. IN R. IPOD W. IPOD FM 3 4 5 6 DISPLAY Displays the playing status, time, etc. STOP BUTTON Stops disc playback. PLAY/PAUSE BUTTON Plays a disc or pauses playback. ENTER BUTTON Selects menu items or starts a Blu-ray disc. (It will not start a DVD disc.) 7 8 9 10 EJECT BUTTON Ejects a disc.
Getting Started Rear Panel FM ANT. VIDEO OUT 1 2 LAN 3 HDMI OUT OPTICAL 4 5V 500mA DIGITAL AUDIO IN DC 12V 5 6 7 1 FM ANTENNA JACK Connect the FM antenna. 2 VIDEO OUT JACK Connect your TV's Video Input jack (VIDEO IN) to the VIDEO OUT Jack on this product. 3 LAN TERMINAL Can be used for network based services (see pages 57~66), BD-LIVE and software upgrade under the network connection.
01 Getting Started Remote Control Tour of the Remote Control FUNCTION TV SOURCE POWER Turn the product on and off. If you want to change to TV mode, press the TV button. If you want to change to Home Cinema, press the BD button. Press numeric buttons to operate options. RECEIVER SLEEP BD TV TA RDS DISPLAY 1 2 3 PTY- PTY SEARCH PTY+ 4 5 6 7 8 0 Allows you to repeat a title, chapter, track or disc. Press to search backwards or forwards. Press to skip backwards or forwards.
Getting Started Installing batteries in the Remote Control * Battery size: AAA TV Brand Code List Brand Code Brand Code Admiral (M.Wards) 56, 57, 58 Mitsubishi/ MGA 18, 40, 59, 60, 75 A Mark 01, 15 MTC 18 NEC 18, 19, 20, 40, 59, 60 Anam 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14 Nikei 03 Onking 03 01, 18, 40, 48 Onwa 03 Panasonic 06, 07, 08, 09, 54, 66, 67, 73, 74 AOC ✎ NOTE Make sure to match the “+” and “–” ends of Bell & Howell (M.
02 Connections Connections This section involves various methods of connecting the product to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord. Connecting the Speakers Position of the product Place it on a stand or cabinet shelf, or under the TV stand. SW Selecting the Listening Position The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV.
Connections Connecting the Wireless Subwoofer VOL PS-WD7100 Connect the power cord on the rear of the subwoofer to the power. • If the main unit is turned on The subwoofer will be automatically connected to the product and the Link LED on its front will blink blue for a few seconds. • If the main unit is turned off The Link LED on the front of the subwoofer will blink blue for about 30 seconds, then will change to red as the sub switches to STANDBY mode.
02 The wireless receiving antenna is built into the wireless subwoofer. Keep the unit away from water and moisture. For optimal listening performance, make sure that the area around the wireless subwoofer location is Connections ! CAUTION clear of any obstructions. Do not let children play with or near the speakers. They could get hurt if a speaker falls. When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct.
Connections Connecting the Video Out to your TV Choose one of the two methods for connecting to a TV. METHOD 1 FM ANT. VIDEO OUT LAN HDMI OUT OPTICAL 5V 500mA DIGITAL AUDIO IN DC 12V HDMI OUT HDMI IN Attach the ferrite core (Small) as shown. METHOD 1 : HDMI (BEST QUALITY) Connect an HDMI cable (not supplied) from the HDMI OUT jack on the rear of the product to the HDMI IN jack on your TV. ✎ NOTE Certain HDMI output resolutions may not work, depending on your TV.
02 Connections FM ANT. VIDEO OUT LAN HDMI OUT Video Cable Video Adapter METHOD 2 : Composite Video (GOOD QUALITY) After connect the supplied Video Adapter to the VIDEO OUT on the rear of the product, connect the Video Adapter and the VIDEO IN of the TV with video cable. ✎ NOTE The VIDEO source is always output in 576i/480i resolution regardless of the resolution set in the Setup menu.
Connections Connecting an External Digital Component OPTICAL 5V 500mA DIGITAL AUDIO IN DC 12V Optical Cable (not supplied) Set-Top Box OPTICAL OPTICAL : Connecting an External Digital Component Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box). 1. Connect the Digital Input (OPTICAL) on the product to the Digital Output of the external digital component. 2. Press the FUNCTION button to select D.IN input. • The mode switches as follows : BD/DVD D. IN R. IPOD W.
02 This product enables you to view network based services (See pages 57~66) such as Smart Hub and BD-LIVE, as well as receive software upgrades when a network connection is made. We recommend using an Wireless router or IP router for the connection. For more information on router connection, refer to the user manual of the router or contact the router manufacturer for technical assistance. Connections Connecting to the Network Cable Network 1.
Connections Wireless Network You can connect to your network with a Wireless IP sharer. A wireless AP/IP router is required to make a wireless network connection. To set the network configuration options. see page 34. Broadband service Wireless IP sharer PC VOL Networking with PC for AllShare function (See page 66) ✎ NOTE To use a wireless network, your product must be connected to a wireless IP sharer.
03 Setup 1. Turn on your TV after connecting the product. When you connect and turn on the product to a TV for the first time, the Initial Settings screen appears. Setup Initial Settings • Home Menu My Contents Videos Photos Music Function My Devices Internet Settings Initial Settings | On-Screen Language Select a language for the on-screen displays.
Setup 2. Press the ◄► buttons to select Settings, and then press the ENTER button. Accessing the Settings Menu DISC MENU MENU 3. Press the ▲▼ buttons to select the desired submenu, and then press the ENTER button. TITLE MENU POPUP 1 TOOLS INFO 4. Press the ▲▼ buttons to select the desired item, and then press the ENTER button. 3 5. Press the EXIT button to exit the menu.
03 You can configure various display options such as the TV Aspect Ratio, Resolution, etc. 3D Settings Screen Size Select whether to play a Blu-ray Disc with 3D contents in 3D Mode.
Setup TV Aspect BD Wise (Samsung Products only) Depending on the type of television you have, you may want to adjust the screen size setting. BD Wise is Samsung’s latest inter-connectivity feature. • 16:9 Original : Select when you connect the product to a 16:9 TV screen. The product will display all content in its original aspect ratio. Content formatted in 4:3 will be displayed with black bars on the left and right.
03 Setup Resolution according to the output mode • Blu-ray Disc/E-contents/Digital Contents playback HDMI / connected Setup Output HDMI Mode HDMI / not connected VIDEO Mode VIDEO Mode 1080p@60F 576i/480i - Max. Resolution of TV input 576i/480i - Blu-ray Disc E-contents/Digital contents BD Wise Optimal resolution Auto Max.
Setup ✎ NOTE If the TV you connected to the product does not support Movie Frame or the resolution you selected, the message “If no pictures are shown after the selection, please wait for 15 seconds. And then, the resolution will be reverted to the previous value automatically. Would you like to make a selection?” appears. If you select Yes, the TV’s screen will go blank for 15 seconds, and then the resolution will revert to the previous resolution automatically.
03 Settings Speaker Display Network Distance If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the front and subwoofer speakers. Speaker Audio Setup Audio | Level • You can set the Speaker Distance between 1ft(0.3m) and 30ft(9.2m). Distance System Language Settings Security Display General Audio Support > Move " Enter ' Return Network System Distance 10(ft) 3.0(m) | : 10(ft) 3.0(m) : 10(ft) 3.
Setup HDMI Audio Digital Output The audio signals transmitted over the HDMI Cable can be toggled On/Off. • Off : Video is transmitted over the HDMI connection cable only, and audio is output through your product speakers only. • On : Both video and audio signals are transmitted over the HDMI connection cable, and audio is output through your TV speakers only.
03 Setup Digital Output Selection Setup PCM Audio Stream on DVD Definition for Blu-ray Disc Bitstream (Re-encoded DTS) Bitstream (Re-encoded Dolby D) HDMI supported HDMI supported HDMI supported HDMI supported AV receiver AV receiver AV receiver AV receiver Connection Audio Stream on Blu-ray Disc Bitstream (Unprocessed) PCM Up to 7.1ch PCM DTS re-encoded Re-encoded Dolby Digital * Dolby Digital Up to 7.
Setup Dynamic Range Control 2. Press the ▲▼ buttons to select Network, and then press the ENTER button. You can listen at low volumes, but still hear dialog clearly. This is only active if your product detects a Dolby Digital signal. • Auto : The Dynamic Range Control will be set automatically based on the information provided by the Dolby TrueHD Soundtrack. • Off : You can enjoy the movie with the standard Dynamic Range.
03 Wireless Network 1. Press the ▲▼ buttons to select Wired, and then press the ENTER button. • Wireless (General) 2. Press the ◄► buttons to select IP Settings, and then press the ENTER button. • One Foot Connection System Language Security IP Mode Manual 0 . 0 . 0 . 0 0 . 0 . 0 . 0 0 . 0 . 0 . 0 IP Address Subnet Mask Gateway DNS Mode Manual 0 . 0 . 0 . 0 DNS Server General OK Support > Move " Enter ' Return 3. Press the ENTER button to select IP Mode. 4.
Setup 4. On the Security screen, enter your network’s Pass Phrase. Enter numbers directly using your remote control. To select a letter, press the ▲▼◄► buttons to move the cursor, then press the ENTER button. Settings Display Audio Network Settings Enter security key. 0 entered To enter the Network settings into your product, follow these steps: 1. Follow Steps 1 through 5 in the ‘Setting Up the Wireless Network Connection - Auto’ procedure. 2.
03 2. Press the ENTER button. The easiest way to set up the wireless network connection is using the WPS(PBC) function or the One Foot Connection function. If your wireless router has a WPS(PBC) button, follow these steps: 1. Press the ▲▼ buttons to select WPS(PBC). Settings Network Settings Display Select a network connection type. Audio Network 3. Place the Samsung Wireless Router within 25 cm (10 inches) of your product to connect. Setup WPS(PBC) 4.
Setup System Initial Settings By using the Initial Settings function, you can set the language, Network Settings, etc. For more information about the Initial Settings function, refer to the Initial Settings section of this user manual. (See pages 25~41) Anynet+(HDMI-CEC) Anynet+ is a convenient function that offers linked operations with other Samsung products that have the Anynet+ feature. To operate this function, connect this product to a Samsung TV with an HDMI cable.
03 You can select the language you prefer for the Home menu, disc menu, etc. • On-Screen Menu : Select the language for the on-screen displays. • Disc Menu : Select the language for the disc menu displays. • Audio : Select the language for disc audio. • Subtitle : Select the language for disc subtitles. ✎ NOTE The selected language will only appear if it is supported on the disc. Change Password Change the 4-digit password used to access security functions. If you forgot your password 1.
Setup 6. If this is the first time you are using the function, it will ask you to allow or deny remote control of the product. Select Allow. 7. Follow the instructions that came with the application to control the product. ✎ NOTE Your product must be connected to the Internet to use the By Internet function. The upgrade is complete when the product turns off, and then turns on again by itself.
03 To upgrade by Disc, follow these steps: 1. Visit www.samsung.com/bluraysupport. ✎ NOTE When the system upgrade is done, check the software details in the software Upgrade menu. 2. Download the latest disc software upgrade zip archive to your computer. Do not turn off the product during the software 3. Unzip the zip archive to your computer. You should have a single folder with the same name as the zip file. To use the Via download function, your 4. Write the folder onto a disc.
Basic Functions • Audio CD (CD-DA) Playing a Disc track 1 track 2 track 3 track 4 track 5 Playback 1. Insert a disc into the disc slot with the disc's label facing up. 2. Press the PLAY (►) button. folder (group) 1 file 1 file 2 Playback related buttons PLAY ( ►) Starts playback. STOP ( ) Stops playback. • If you press the button once : The stop position is memorized. • If you press the button twice : The stop position is not memorized.
04 Using the Search and Skip Functions Z 1. During playback, press the TITLE MENU button on the remote control. 2. Press the ◄ ► buttons to make the desired selection, then press the ENTER button. TITLE MENU POPUP Searching for a Desired Scene hzZyx ✎ NOTE Depending on the disc, the menu items may differ and this menu may not be available. The Title Menu will only be displayed if there are at least two titles on the disc. Playing the Title List z 1.
Basic Functions Slow Motion Play/Step Motion Play Repeat > Off Slow Motion Play hzZyx • In pause ( ) mode, press the SEARCH () button. If you press the SEARCH () button, the playback speed is reduced to * 1/8 * 1/4 * 1/2 • To return to normal speed playback, press the PLAY (► ) button. ✎ NOTE No sound is heard during slow mode. Slow motion operates only in the forward 3. To return to normal play, press the REPEAT button again. 4. Press the ▲▼ buttons to select Off, the press the ENTER button.
04 During playback, you can operate disc menu by pressing the TOOLS button. TOOLS • TOOLS Menu Screen Tools Title Search Chapter Search Time Search Picture Settings Audio User EQ Subtitle Angle 1/2 : 1/20 : 00:00:13/01:34:37 : Normal : 1/4 ENG Multi CH : : mode will be also displayed if the Blu-ray Disc has a BONUSVIEW section. Use the ◄► button to switch between primary and secondary audio modes. This function depends on what audio languages are encoded on the disc and may not be available.
Basic Functions Caption Function x • You must have some experience with video extraction and editing in order to use this feature properly. • To use the caption function, save the caption file (*.smi) in the same file name as that of the DivX media f le (*.avi) within the same folder. Example. Root Samsung_007CD1.avi Samsung_007CD1.smi • Up to 60 alphanumeric characters or 30 East Asian characters (2 byte characters such as Korean and Chinese) for the file name.
04 7 ENTER button : Plays the selected track. 8 ► button : During playback, moves to the next page in the Music List or moves to the next track in the Playlist. ◄ button : During playback, moves to the previous page in the Music List or moves to the previous track in the Playlist. 9 STOP button : Stops a track. 0 $ button : Plays the next track. ! # button : Plays the previous track.
Basic Functions Playing an Audio CD (CD-DA)/MP3 Repeat an Audio CD (CD-DA)/MP3 1. Insert an Audio CD (CD-DA) or an MP3 Disc into the disc slot. • For an Audio CD (CD-DA), the first track will be played automatically. • For an MP3 disc, press the ◄► buttons to select Music, then press the ENTER button. 1. During the Playlist playback, press the REPEAT button. Audio CD (CD-DA)/MP3 Screen Elements 1 2 3 REPEAT 2. Select the desired play mode by pressing the REPEAT button repeatedly.
04 Sound Mode 1/2 Page Selected Items : 3 TRACK 001 TRACK 002 00:43 03:56 TRACK 003 TRACK 004 04:41 04:02 TRACK 005 TRACK 006 03:43 03:40 TRACK 007 TRACK 008 04:06 03:52 Close Edit Mode ( ) Page Tools DSP(Digital Signal Processor) Function You can select mode to optimize the sound for sound based on your tastes. 5. Select a desired track and press the TOOLS button. 6. To play the selected track(s), select Play Selected in the Tools menu and press ENTER.
Basic Functions 3D Sound Using the TOOLS button You can enjoy much natural and vivid surround sound with enriched tones of sound. You can adjust the depth of sound using the level options. During the slide show playback, you can use various function by pressing the TOOLS button. Off J High J Medium J Low.
04 F You can use the USB connection to play multimedia files (MP3, JPEG, DivX, etc) downloaded from the USB storage device. 1. ✎ NOTE You must remove the USB storage device safely (by performing the “Safely Remove USB” function) in order to prevent a possible damage to the USB memory. Press the MENU button to move to the home menu, and select the YELLOW(C) button and press the ENTER button.
Basic Functions Setting Mono/Stereo About RDS broadcasting Press the MO/ST button. • Each time the button is pressed, the sound switches between STEREO and MONO. • In a poor reception area, select MONO for a clear, interference-free broadcast. Using the RDS (Radio Data System) to receive FM stations Presetting Stations Example : Presetting FM 89.10 into memory 1. Press the FUNCTION button to select FM. 2. Press the TUNING/CH ( ) button to select <89.10>. 3. Press the TUNER MEMORY button.
04 To search for a program using the PTY You can see the RDS signals the station sends on the display. codes Press the RDS DISPLAY button while listening to an FM station. RDS DISPLAY 1 • Each time you press the button, the display change to show you the following information : PS NAME RT CT Frequency PS (Program Service) While searching, appears and then the station names will be displayed. appears if no signal is sent.
Basic Functions Connecting iPod/iPhone Using the USB Cable If the system is connected to iPod/iPhone using the provided USB cable, you can play music in iPod/iPhone using the system. MI OUT OPTICAL 5V 500mA DIGITAL AUDIO IN DC 12V 5V 500mA 1. Connect iPod/iPhone using the USB cable to the front USB port. • Your iPod is automatically turned on. • “iPod” message appears on the TV screen. 2. Press the ENTER button. 3. Select the music file to play.
04 ✎ NOTE “Made for iPod” cradle's LED Display Function GREEN LED ON Power on /Charging completed RED LED ON Charging. ✎ NOTE The LED indicates the charging state of the built-in battery in the wireless iPod transmitter. Check the charging state of iPod/iPhone by checking the charging indication of its battery. ! CAUTION It links to Wireless Dock Cradle when SWA-5000 is used. Only Samsung wireless transmitter that is compliant with the system can be recharged.
Basic Functions How to Link the Wireless Transmitter with the Main Unit Operation status of the wireless transmitter's LED 1. Turn off your Home Cinema. 2. Press the 4, 7, 6, 3 buttons on the remote control in order. • The Power LED blinks once. LIN 3. Connect the iPod/iPhone to the Wireless transmitter.
05 Network Services Read the following instructions before using any network service. 1. Connect the product to the network. (see pages 23~24) 2. Configure the network settings. (see pages 34~37) 3. The Smart Hub screen appears. ✎ NOTE Certain applications are available only in certain countries. Network Services You can enjoy various network services such as Smart Hub or BD-LIVE by connecting the product to your network. 4. The Terms of Service Agreement screen appears.
Network Services Smart Hub at a Glance 1 2 3 4 6 Navigation Help : Displays the remote control buttons you can use to navigate in Smart Hub. • RED (A) : To log in to Smart Hub. • GREEN (B) : To sort the applications. • YELLOW (C) : To edit the applications. • BLUE (D) : To change the settings of Smart Hub. 7 My Applications : Displays your personal gallery of applications which you can add to, modify, and delete.
05 Creating an Account Through your remote, you can use the OnScreen Keypad to enter letters, numbers, and symbols. To establish your own, exclusive, configuration of Smart Hub, create your own Smart TV Account. To create an account, follow these steps: 1. 1 1 2 3 .,– abc def 4 5 6 ghi jkl mno 7 8 9 pqrs tuv wxyz Shift Press the RED (A) button on your remote control. The Login screen appears.
Network Services 8. When done, press the ENTER button to select OK, and then press the ENTER button again. The Create Account screen re-appears. 9. Select Confirm password, and then press the ENTER button. 10. Repeat Steps 7 and 8. 11. When the Create Account screen reappears, select Create Account, and then press the ENTER button. The Confirmation window appears. 12. Select OK, and then press the ENTER button. The Continue to Register Service window appears. 13.
05 Change Password If you have existing accounts with any of the providers listed by the Register Service Account function, you can associate the provider account and the provider account password with your Smart TV Account. If you associate the account, you will be able to log onto the account through Smart Hub easily, without entering your account name or password. The Change Password function lets you change your Smart Hub password.
Network Services 3. 4. After a few moments, Smart Hub automatically resets. The screen may go black, then Smart Hub re-appears. In a few moments, it starts the re-initialization procedure. To complete the re-initialization, go to Step 4 in Starting Smart Hub for the First Time. (See page 57) ✎ NOTE If you forgot your password, press the STOP ( ) button on the front panel of the product for more than 5 seconds with no disc inserted. 2.
05 Rename Folder The Move to Folder function lets you move a widget to a folder. To use the Move to Folder function, follow these steps: The Rename Folder function lets you rename folders. To use the Rename Folder function, follow these steps: 1. Press the YELLOW (C) button on your remote. 1. Press the YELLOW (C) button on your remote. 2. Select a widget, and then press the ENTER button. 2. Press the ▲▼◄► to select a folder, and then press the ENTER button. 3.
Network Services Unlock 1. Press the YELLOW (C) button on your remote. 2. Press the ▲▼◄► to select a locked widget, and then press the ENTER button. 3. Press the ▲▼◄► to select Unlock, and then press the ENTER button. The Security window appears. 4. Enter the Parental Security Code (See page 39). If you have not created a Parental Security Code, enter 0000. 5. Press the ENTER button. The Lock Service Released window appears confirming the lock has been release, and then closes.
05 Samsung Apps by category To use the Samsung Apps screen, follow these steps: The following categories are available: 1. Press the ◄► buttons to move to the category list on the left. 2. Press the ▲▼ to highlight a category. In a few seconds, the Samsung Apps screen displays the applications in that category. The Sort tabs appear across the top. 3. Press the ► button to move to the displayed applications or services. 4.
Network Services Using the coloured buttons on your remote with Samsung Apps • RED (A) (Login) : To log into your Smart TV Account. • GREEN (B) (Thumbnail/List View) : To toggle applications between Thumbnail and List view. • BLUE (D) (Sort By) : To sort the applications in a category by Recommended, Most Downloaded, Most Recent, or Name. • Return : To return to the previous menu. ✎ NOTE The Internet contents services may be added or deleted by providers without notice.
06 Other information Other information Cautionary Notes DC Adapter Use of the DC adapter depends on the specific voltage requirements and electrical outlet design. • • • • • • Using the DC adapter near a radio may cause poor reception. Do not let any type of flammables, liquids, or metal objects enter the adapter. The adapter is covered with an outer plastic sheath. Do not peel open the sheath. Do not drop, jar, or shake the adapter. Do not place in direct sunlight.
Other information Symptom Check/Remedy Audio language and subtitles do not work. • Audio language and subtitles will not work if the disc does not contain them. Menu screen does not appear even when the menu function is selected. • Are you using a disc that does not contain menus? Aspect ratio cannot be changed. • You can play 16:9 BD/DVDs in 16:9 Wide mode, 4:3 Letter Box mode, or 4:3 Pan - Scan mode, but 4:3 BD/DVDs can be seen in 4:3 ratio only.
06 Other information Symptom Check/Remedy PC Share Manager function I can see folders shared through the PC Share Manager, but I cannot see the files. • Since it shows only files corresponding to the Image, Music, and Movie categories, files that do not correspond to these categories may not be displayed. AllShare function Video is played intermittently. • Check if the network is stable. • Check if the network cable is properly connected and if the network is not overloaded.
Other information Specifications HT-D7100 General FM Tuner Weight Dimensions Operating Temperature Range Operating Humidity Range Signal/noise ratio Usable sensitivity Total harmonic distortion BD (Blu-ray Disc) DVD (Digital Versatile Disc) Disc CD : 12cm (COMPACT DISC) CD : 8cm (COMPACT DISC) Video Output Composite Video Video/Audio HDMI Front speaker output Amplifier Frequency response S/N Ratio Channel separation Speaker system Speaker Impedance Frequency range Output sound pressure level Rat
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Area ` North America Canada Mexico U.S.A Contact Centre Web Site 1-800-SAMSUNG (726-7864) 01-800-SAMSUNG (726-7864) 1-800-SAMSUNG (726-7864) www.samsung.com www.samsung.com www.samsung.
Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66.
