HT-D5500 HT-D5530 HT-D5550 5.1CH Blu-ray™ Home Entertainment System user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive a more complete service, please register your product at www.samsung.
Safety Information Safety Warnings TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lighting flash and Arrowhead within Triangle Is awarning sign alerting you of dangerous voltage Inside the product. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
Safety Information Precautions • Ensure that the AC power supply in your house complies with specifications listed on the identification sticker located on the back of your product. • Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (7.5~10cm / 20~25 inches). • Do not place the product on amplifiers or other equipment which may become hot. Make sure the ventilation slots are not covered. • Do not stack anything on top of the product.
Cautions on Handling and Storing Discs Small scratches on the disc may reduce sound and picture quality or cause skipping. Be especially careful not to scratch discs when handling them. Holding discs • Do not touch the playback side of the disc. • Hold the disc by the edges so that fingerprints will not get on the surface. • Do not stick paper or tape on the disc. Disc Storage • Do not keep in direct sunlight • Keep in a cool ventilated area • Keep in a clean protection jacket and store vertically.
Contents Safety Information 2 3 4 4 4 Safety Warnings Precautions Cautions on Handling and Storing Discs License Copyright Getting Started 7 8 9 13 14 14 15 16 Key features of your new Blu-ray Home Theater Icons that will be used in manual Disc Types and Characteristics Accessories Description Front Panel Rear Panel Remote Control CONNECTIONS 18 21 22 23 26 27 Connecting the Speakers Connecting the Optional Wireless Receiver Module Connecting the FM Antenna Connecting External Devices/your TV via HD
Setup 44 44 44 44 44 44 44 45 45 46 Security BD Parental Rating DVD Parental Rating Change Password General Front Display Network Remote Control Support Software Upgrade Contact Samsung Basic Functions 47 47 48 49 49 50 52 54 55 56 57 57 57 58 59 60 Playing a Disc Using the Disc menu / Title menu / Popup menu Using the Search and Skip Functions Slow Motion Play/Step Motion Play Repeat Playback Using the TOOLS button Listening to Music Sound Mode Playing back a Picture Playing back a USB Storage Device
01 Getting Started Getting Started Key features of your new Blu-ray Home Theater Product Features 3D This product can play 3D contents through an HDMI cable. To implement the 3D effect, connect a 3D device (3D-compliant AV receiver, 3D-compliant TV) to the product using an HDMI cable, and play the 3D content while wearing 3D vision glasses. Smart Hub You can download various for pay or free-of charge applications through a network connection.
Getting Started Icons that will be used in manual Make sure you understand the following terms before reading the rest of the user manual. Term Logo Icon h � Z BD-ROM BD-RE/-R DVD-VIDEO Definition Indicates a function available on a BD-ROM. Indicates a function available on a BD-RE/-R disc recorded in the BD-RE format. Indicates a function available on a DVD-VIDEO.
01 Logos of Discs that can be played Blu-ray Disc Compatibility Blu-ray is a new and evolving format. Accordingly, disc compatibility issues are possible. Not all discs are compatible and not every disc will play back. For additional information, refer to the Disc Types and Characteristics section of this Manual. Blu-ray Disc 3D Blu-ray Disc Dolby Digital Plus PAL broadcast system in U.K, France, Germany, etc.
Getting Started Region Code BD-RE/-R Both the product and the discs are coded by region. These regional codes must match for the product to play the disc.If the codes do not match, the disc will not play. Blu-ray RE/-R discs can be recorded and played back. This product can play back a BD-RE/-R disc recorded by other compatible Blu-ray disc recorders. DVD-VIDEO Disc Type Blu-ray Region Code Area a North America, Central America, South America, Korea, Japan, Taiwan, Hong Kong and South East Asia.
01 Using JPEG discs • The home theater can play back D-R/-RW, DVD-RW/-R discs recorded in the UDF or JOLIET format. • Only JPEG files with the ".jpg", ".JPG", ".jpeg" or "JPEG" extension can be displayed. • Progressive JPEG is supported. DVD-RW/-R (V) • This format is used for recording data on DVD-RW or DVD-R discs. This product can play DVD-RW or DVD-R discs if they have been Finalized.
Getting Started File Extension Container *.vro VRO VOB Video Codec Audio Codec Resolution MPEG2 AC3 MPEG LPCM 1920x1080 AC3 MPEG LPCM AAC 352x288 MPEG1 MPEG1 *.mpg *.mpeg MPEG2 PS H.264 H.264 TS 1920x1080 1920x1080 AC3 AAC MP3 DD+ HE-AAC MPEG2 *.ts *.tp *.trp 352x288 VC1 1920x1080 1920x1080 1920x1080 Restrictions • • • • • Some of the Codecs listed above will not play if there is a problem with the contents.
01 6) Connect USB devices directly to the product's USB port. Connecting through a USB cable may cause compatibility problems. 7) Inserting more than one memory device to a multi-card reader may cause the reader to operate improperly. 8) The product does not support the PTP protocol for digital cameras 9) Do not disconnect a USB device during a "loading" process. 10) The bigger the image resolution, the longer the the image takes to display.
Getting Started Description Front Panel 1 2 3 4 5 6 7 8 9 10 11 12 5V 500mA ASC IN 1 POWER BUTTON ( 2 FUNCTION BUTTON The mode switches as follows : BD/DVD ; D. IN ; AUX ; R. IPOD ; W. IPOD ; H. IN1 ; H. IN2 ; FM 3 4 5 6 DISPLAY Displays the playing status, time, etc. STOP BUTTON Stops disc playback. PLAY/PAUSE BUTTON Plays a disc or pauses playback. ENTER BUTTON Selects menu items or starts a Blu-ray disc. (It will not start a DVD disc.
01 Getting Started Rear Panel 1 2 3 4 5 6 7 LAN iPod HDMI OUT 9 10 COMPONENT OUT FM ANT DIGITAL AUDIO IN 8 11 CENTER 12 SPEAKERS OUT FRONT SURROUND SUBWOOFER FRONT SURROUND HDMI IN OPTICAL WIRELESS AUX IN VIDEO OUT SPEAKER IMPEDANCE : 3 1 LAN TERMINAL Can be used for network based services (see pages 61~70), BD-LIVE and software upgrade under the network connection. 2 iPod JACK Connect the iPod dock connector here.
Getting Started Remote Control Tour of the Remote Control Turn the product on and off. To change to TV mode, press the TV button. To change to Home Theater, press the BD button. Press numeric buttons to operate options. FUNCTION TV SOURCE POWER RECEIVER SLEEP BD TV To eject the disc. 2 3 1 2 3 4 5 6 4 5 6 7 8 9 7 8 REPEAT FULL SCREEN 0 Press to search backwards or forwards. Press to stop/play a disc. Press to pause a disc. Cut off the sound temporarily.
01 * Battery size: AAA ✎✎NOTE `` Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment. `` Assuming typical TV usage, the batteries last for about one year. `` The remote control can be used up to approximately 23 feet (7 meters) in a straight line. Setting the Remote Control You can control certain functions of your TV with this remote control. When operating a TV with the remote control 1. Press the TV button to set the remote control to TV mode. 2.
Connections This section describes various methods of connecting the product to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord. Connecting the Speakers Position of the product SW Place it on a stand or cabinet shelf, or under the TV stand. Selecting the Listening Position The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV. Example : For 32" TV's 6.56 ~ 7.
02 Connections Speaker Components HT-D5500 (L) (R) (L) FRONT (R) SURROUND Center SUBWOOFER SPEAKER CABLE Speaker Components HT-D5530 HT-D5550 (L) (R) (L) (R) SCREW (Large): 4EA SCREW (Large): 2EA SCREW (Small): 16EA SCREW (Small): 8EA FRONT (L) FRONT STAND (R) SURROUND Center STAND BASE SUBWOOFER SPEAKER CABLE STAND (L) (R) SURROUND Center STAND BASE SUBWOOFER SPEAKER CABLE Installing the Speakers on the Tallboy Stand * HT-D5530 only - Front Speakers * HT-D5550 only - Front/Sur
Connections Installing the Speakers on the Tallboy Stand(Continue) 3. Insert the large screw (5x15, For connecting Stand & Stand Base) clockwise into the hole on the rear of the stand using a screwdriver. 4. Connect the upper Speaker to the assembled Stand. 5. Insert another large screw (5x15, For connecting Speaker & Stand) clockwise into the hole on the rear of the speaker using a screwdriver. 6. This is the appearance after the speaker is installed. Follow this steps to install other speaker.
02 Connections Connecting the Optional Wireless Receiver Module To connect the surround speakers wirelessly, you have to purchase the wireless receiver module and TX card from your Samsung retailer. • This product should be connected with the SWA-5000 only.
Connections !!CAUTION `` Do not insert any other card except the TX card dedicated to the product. `` `` `` `` `` `` If you insert a different TX card, you can damage the product and may not be able to remove the card easily. Do not insert the TX card upside down or in the reverse direction. Insert the TX card when the product is turned off. Inserting the card when it is turned on may cause a problem. The wireless receiving antenna is built into the wireless receiver module.
02 HDMI is the standard digital interface for connecting to devices such as a TV, projector, DVD player, Blu-ray player, set top box, and more. Because HDMI is all digital, you'll enjoy digital quality video and sound as it was originally created, without the distortions that can be caused when digital content is converted to Analog.
Connections HDMI IN : Connecting to an External Component with an HDMI Cable 1. Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI OUT jack on your digital device. 2. Press the FUNCTION button to select H. IN1 or H. IN2 input. The mode switches as follows : BD/DVD ; D. IN ; AUX ; R. IPOD ; W. IPOD ; H. IN1 ; H.
02 Blue Connections Red Green METHOD 1 COMPONENT OUT CENTER SPEAKERS OUT FRONT SURROUND METHOD 2 Yellow SUBWOOFER FRONT AUX IN VIDEO OUT SURROUND SPEAKER IMPEDANCE : 3 METHOD 1 : Component Video (BETTER QUALITY) If your television is equipped with Component Video inputs, connect a Component video cable (not supplied) from the Component Video Output (Pr, Pb and Y) Jacks on the back of the product to the Component Video Input Jacks on your TV.
Connections Connecting Audio from External Components COMPONENT OUT FM ANT DIGITAL AUDIO IN iPod HDMI OUT CENTER HDMI IN OPTICAL SUBWOOFER WIRELESS Red Optical Cable (not supplied) Set-Top Box AUX IN Audio Cable (not supplied) If the external Analog component has only one Audio Out, connect either left or right. VIDEO OUT White VCR OPTICAL AUX OPTICAL : Connecting an External Digital Component Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box). 1.
02 You can connect this product to a network and use network based services such Smart Hub and BDLIVE (See pages 61~70), as well as receive software upgrades through the network connection. We recommend using a wireless router or IP router for the connection. For more information on router connection, refer to the user manual of the router or contact the router manufacturer for technical assistance. Cable Network 1.
Connections Wireless Network You can connect the home theater to your network through a wireless IP sharer (router). To set the network configuration options. see page 39. Broadband service Wireless IP sharer PC 5V 500mA ASC IN Networking with PC for AllShare function (See page 70) ✎✎NOTE `` To use a wireless network, your product must be connected to a wireless IP sharer (router).
03 Setup 1. Turn on your TV after connecting the product. When you connect and turn on the product to a TV for the first time, the Initial Settings screen appears. Setup Initial Settings • Home Menu My Contents Videos Photos Music 初始设定 I 螢幕顯示語言 Function 选择螢幕的显示语言。 English My Devices Internet Settings d WPS(PBC) 中文 ✎✎NOTE < 移动 " 确认 2. Press the ◄► buttons to select English, and then press the ENTER button. 3. Press the ENTER button to select Start. 4.
FULL SCREEN REPEAT 0 Setup MUTE TUNING VOL 2. Press the ◄► buttons to select Settings, and then press the ENTER button. /CH SFE MODESettings Accessing the Menu DISC MENU MENU 3. Press the ▲▼ buttons to select the desired submenu, and then press the ENTER button. TITLE MENU POPUP 1 TOOLS INFO 4. Press the ▲▼ buttons to select the desired item, and then press the ENTER button. 3 2 RETURN A B 5. Press the EXIT button to exit the menu.
03 You can configure various display options such as the TV Aspect Ratio, Resolution, etc. 3D Settings Screen Size Select whether to play a Blu-ray Disc with 3D contents in 3D Mode.
Setup TV Aspect BD Wise (Samsung Products only) Depending on the type of television you have, you may want to adjust the screen size setting. BD Wise is Samsung’s latest inter-connectivity feature. • 16:9 Original : Select when you connect the product to a 16:9 TV screen. The product will display all content in its original aspect ratio. Content formatted in 4:3 will be displayed with black bars on the left and right.
03 Setup Resolution according to the output mode •• Blu-ray Disc/E-contents/Digital Contents playback HDMI / connected HDMI / not connected HDMI Mode Output Component Mode Blu-ray Disc E-contents/ Digital contents Component/ VIDEO Mode Blu-ray Disc E-contents/ Digital contents VIDEO Mode BD Wise Resolution of Blu-ray Disc 1080p@60F 576i(480i) - - - Auto Max. Resolution of TV input Max.
Setup ✎✎NOTE `` If the TV you connected to the product does not support Movie Frame or the resolution you selected, the message “If no pictures are shown after the selection, please wait for 15 seconds. And then, the resolution will be reverted to the previous value automatically. Would you like to make a selection?” appears. If you select Yes, the TV’s screen will go blank for 15 seconds, and then the resolution will revert to the previous resolution automatically.
03 Speaker Settings Settings Speaker Settings Display Audio Level Network Distance System Language Test Tone \ : Off Distance If you cannot place the speakers at equal distances from the listening position, you can adjust the delay time of the audio signals from the front, Center, surround and subwoofer speakers. • You can set the Speaker Distance between 1ft (0.3m) and 30ft (9.2m).
Setup Musical Room Calibration By setting the Musical Room Calibration (MRC) function just once when you relocate or install the product, you can have the product automatically recognize the distance between speakers, levels between channels, and frequency characteristics to create a 5.1-channel sound field optimized for your environment. ✎✎NOTE `` Running the Musical Room Calibration function takes about 3 minutes.
03 The audio signals transmitted over the HDMI Cable can be toggled On/Off. • Off : Video is transmitted over the HDMI connection cable only, and audio is output through your product speakers only. • On : Both video and audio signals are transmitted over the HDMI connection cable, and audio is output through your TV speakers only. ✎✎NOTE `` HDMI Audio is automatically down-mixed to 2ch for TV speakers.
Setup Digital Output Selection Setup PCM Bitstream (Unprocessed) Bitstream (Re-encoded DTS) Bitstream (Re-encoded Dolby D) HDMI supported HDMI supported HDMI supported HDMI supported AV receiver AV receiver AV receiver AV receiver Connection PCM Up to 7.1ch PCM DTS re-encoded Re-encoded Dolby Digital * Dolby Digital Up to 7.1ch Dolby Digital DTS re-encoded Re-encoded Dolby Digital * Dolby Digital Plus Up to 7.
03 Setup Audio Sync Wired Network Video may fall out of sync with the audio when the product is connected to a digital TV. If this occurs, adjust the audio delay time to match the audio to the video. • You can set the audio delay time between 0 msec and 300 msec. Set it to the optimal status. Setting Up a Wired Connection - Auto 1. Press the ▲▼ buttons to select Wired.
Setup To enter the Network settings into your product, follow these steps: Wireless Network 1. Press the ▲▼ buttons to select Wired, and then press the ENTER button. • Wireless (General) 2. Press the ◄► buttons to select IP Settings, and then press the ENTER button. Settings IP Settings Display Audio IP Mode Network IP Address System Subnet Mask Language Security General Support Manual 0 . 0 . 0 . 0 0 . 0 . 0 . 0 0 . 0 . 0 . 0 Gateway DNS Mode Manual 0 . 0 . 0 .
03 Settings Display Audio Network System Language Security General Support Network Settings Enter security key. 0 entered a b c d e f 1 2 3 g h i j k l 4 5 6 m n o p q r 7 8 9 s t u v w x y z 0 * Delete a/A Space To enter the Network settings into your product, follow these steps: 1. Follow Steps 1 through 5 in the ‘Setting Up the Wireless Network Connection - Auto’ procedure. 2.
Setup 2. Press the ENTER button. WPS(PBC) The easiest way to set up the wireless network connection is using the WPS(PBC) function or the One Foot Connection function. If your wireless router has a WPS(PBC) button, follow these steps: 1. Press the ▲▼ buttons to select WPS(PBC). Settings Network Settings Display Select a network connection type. Audio Network System 3. Place the Samsung Wireless Router within 25 cm (10 inches) of your product to connect. 4.
03 Initial Settings By using the Initial Settings function, you can set the language, Musical Room Calibration, Network Settings, etc. For more information about the Initial Settings function, refer to the Initial Settings section of this user manual. (See pages 29~46) Anynet+ (HDMI-CEC) Anynet+ is a convenient function that offers linked operations with other Samsung products that have the Anynet+ feature. To operate this function, connect this product to a Samsung TV with an HDMI cable.
Setup Language You can select the language you prefer for the Home menu, disc menu, etc. • On-Screen Menu : Select the language for the on-screen displays. • Disc Menu : Select the language for the disc menu displays. • Audio : Select the language for disc audio. • Subtitle : Select the language for disc subtitles. ✎✎NOTE Change Password Change the 4-digit password used to access security functions. If you forgot your password 1. Remove the disc. 2.
03 7. Follow the instructions that came with the application to control the product. Support Software Upgrade The Software Upgrade menu allows you to upgrade the product’s software for performance improvements or additional services. You can upgrade in four ways: • • • • By Internet By USB By Disc By Downloaded (File) ✎✎NOTE `` Your product must be connected to the Internet to use the By Internet function. `` The upgrade is complete when the product turns off, and then turns on again by itself.
Setup By Disc To upgrade by Disc, follow these steps: 1. Visit www.samsung.com/bluraysupport. ✎✎NOTE `` When the system upgrade is done, check the software details in the software Upgrade menu. 2. Download the latest disc software upgrade zip archive to your computer. `` Do not turn off the product during the software 3. Unzip the zip archive to your computer. You should have a single folder with the same name as the zip file. `` To use the By Downloaded function, your 4.
04 Basic Functions Basic Functions • Audio CD (CD-DA) Playing a Disc track 1 track 2 track 3 track 4 track 5 Playback 1. Insert a disc into the disc slot with the disc's label facing up. 2. Press the PLAY (+) button. folder (group) 1 file 1 file 2 Playback related buttons PLAY ( +) Starts playback. STOP ( @ ) Stops playback. •• If you press the button once : The stop position is memorized. •• If you press the button twice : The stop position is not memorized.
REPEAT 0 Basic Functions MUTE POWER FUNCTION TV SOURCE Using the Title Menu DVD RECEIVER/TV TUNING /CH SLEEP SFE MODE Z 1 DISC MENU MENU 1. During playback, press the TITLE 1 2 MENU button on the remote control. TOOLS 4 to 5 2. Press the ▲▼_ + buttons POWER make the desired selection, then press the ENTER button. 7 8 DVD RECEIVER/TV TITLE MENU 3 4 76 9 0 INFO FUNCTION TV SOURCE REPEAT SLEEP EXIT `` Depending on the disc, the menu items may TUNER differ and this menu may not be available.
04 Repeat Basic Functions Slow Motion Play/Step Motion Play > Off Slow Motion Play hzZyx • In pause ( # ) mode, press the SEARCH ()) button. If you press the SEARCH ()) button, the playback speed is reduced to * 1/8 * 1/4 * 1/2 • To return to normal speed playback, press the PLAY (+ ) button. ✎✎NOTE 3. To return to normal play, press the REPEAT button again. FUNCTION TV SOURCE ✎✎NOTE DVD RECEIVER/TV SLEEP `` Depending on the disc, the Repeat function may not be available.
MUTE Basic Functions VOL DISC MENU MENU Using the TOOLS button During playback, you can operate the disc menu by pressing the TOOLS button.
04 x • You must have some experience with video extraction and editing in order to use this feature properly. • To use the caption function, save the caption file (*.smi) with the same file name as that of the DivX media file (*.avi) within the same folder. Example. Root Samsung_007CD1.avi Samsung_007CD1.smi • You can use up to 60 alphanumeric characters or 30 East Asian characters (2 byte characters such as Korean and Chinese) for the file name.
Basic Functions FUNCTION TV SOURCE POWER Listening to Music SLEEP RECEIVER BD TV 1 2 3 7 BD @ SLEEP 8 TV 9 REPEAT 1 0 2 3 9 STOP button : Stops a track. 4 5 6 0 ] button : Plays the next track. ! [ button : Plays the previous track. If you press this button after three seconds of playback in the Playlist, the current track will be replayed from the beginning.
DVD RECEIVER/TV SLEEP 2 3 4 5 6 Repeat an Audio CD 7 (CD-DA)/MP3 8 9 1. Insert an Audio CD (CD-DA) or an MP3 Disc into the disc slot. • For an Audio CD (CD-DA), the first track will be played automatically. • For an MP3 disc, press the ◄► buttons to select Music, then press the ENTER button. 1. During the Playlist playback, press 0 the REPEAT button. Audio CD (CD-DA)/MP3 Screen Elements 1 3 2 2. Select the desired play mode by pressing the REPEAT button repeatedly.
Basic Functions Audio CD | Music 1/2 Page Selected Items : 3 TRACK 001 TRACK 002 00:43 03:56 TRACK 003 TRACK 004 04:41 04:02 TRACK 005 TRACK 006 POWER 03:43 TRACK 007 FUNCTION TV SOURCE 03:40 TRACK 008 04:06 03:52 c Close Edit Mode ( ) Page Tools DVD RECEIVER/TV " Select ' Return SLEEP 5. When done, press the TOOLS button. 1 2 Play 3 6. To play the selected track(s), select Selected in the Tools menu, and then press ENTER.
DISC MENU MENU TITLE MENU POPUP TOOLS INFO EXIT TUNER MEMORY MO/ST C D B @ INTERNET You can select the desired Dolby Pro Logic II audio mode. Press the DSP PL II button. Music When listening to music, you can experience sound effects as if you are listening to the actual performance. Movie Adds realism to the movie soundtrack. settings. Press iPod SYNC on the remote control to change audio delay.
MUTE VOL Basic Functions Using the TOOLS button DISC MENU MENU TITLE MENU POPUP Playing back a USB Storage Device During the slide show playback, you can use various function by pressing the TOOLS button. TOOLS F INFO You can use the USB connection to play multimedia files (MP3, JPEG, DivX, etc) downloaded from the USB storage device.
04 Connecting an iPod/iPhone Using the USB Cable Using buttons on the Remote Control If the home theater is connected to an iPod/iPhone using the provided USB cable, you can play music in iPod/iPhone through the home theater. POWER FUNCTION TV SOURCE DVD RECEIVER/TV SLEEP 1. Press the FUNCTION button to select FM. 2. Tune in to the desired station. • Preset Tuning 1 : You must first add a desired frequency as a preset.
Basic Functions Playing Music 6. Select the video file to play. -Y ou can use the remote control or the product to control simple playback functions such as the PLAY, PAUSE, STOP, [ /] and( /)buttons. (See page 16.) My Contents Videos Connected Device ✎✎NOTE Photos iPod Function My Devices Music `` You must have the VIDEO output Internet " Enter ' Return Settings `` d WPS(PBC) 1. Connect the iPod dock connector to the iPod Jack on the rear panel of the product. 2.
04 2 1 LIN K STA LIN K `` iPod with dock connector `` iPod with Click Wheel `` `` `` `` `` iPod nano (5th generation) iPod nano (4th generation) iPod nano (3rd generation) iPod nano (2nd generation) iPod nano (1st generation) `` `` `` `` iPhone 4 iPhone 3GS iPhone 3G iPhone ND STA ND BY BY CH AR GE CH AR GE 1. Connect the Wireless Transmitter to the Charging Cradle. 2. Connect the DC power adapter to a wall socket. • The charging indicator lights and charging starts.
Basic Functions `` Playback of applications' contents through the product is not guaranteed. We recommend playing contents downloaded to the iPod. Operation status of the wireless transmitter's LED `` If you have a problem using your iPod, please visit www.apple.com/support/ipod. How to Link the Wireless Transmitter with the Main Unit 1. Turn off your Home Theater. 2. Press the 4, 7, 6, 3 buttons on the remote control in order. • The Power LED blinks once. 3.
05 Network Services Read the following instructions before using any network service. 1. Connect the product to the network. (see pages 27~28) ✎✎NOTE `` Certain applications are available only in certain countries. 4. The Terms of Service Agreement screen appears. If you want to agree, press the ◄► buttons to select Agree, then press the ENTER button. ✎✎NOTE 2. Configure the network settings. (see pages 39~42) `` Screens can take a few seconds to appear.
Network Services Smart Hub at a Glance 1 2 3 4 Search All Your Movie 6 Navigation Help : Displays the remote control buttons you can use to navigate in Smart Hub. •• RED (A) : To log in to Smart Hub. •• GREEN (B) : To sort the applications. •• YELLOW (C) : To edit the applications. •• BLUE (D) : To change the settings of Smart Hub. 7 My Applications : Displays your personal gallery of applications which you can add to, modify, and delete.
05 Creating an Account Through your remote, you can use the OnScreen Keypad to enter letters, numbers, and symbols. To establish your own, exclusive, configuration of Smart Hub, create your own Smart TV Account. 1 .,– 1 2 3 4 1. 2 3 abc def ghi 5 6 jkl mno 7 8 9 pqrs tuv wxyz T9 Your Video Ab AB 1 Recommended Smart Hub ID 6 Password Contents 1 Contents 2 xxxxxxxx xxxxxxxx The current keypad. Use to enter letters, numbers, and symbols.
Network Services 8. When done, press the ENTER button to select OK, and then press the ENTER button again. The Create Account screen re-appears. 9. Select Confirm password, and then press the ENTER button. 10. Repeat Steps 7 and 8. 11. When the Create Account screen reappears, select Create Account, and then press the ENTER button. The Confirmation window appears. 12. Select OK, and then press the ENTER button. The Continue to Register Service window appears. 13.
05 Change Password If you have existing accounts with any of the providers listed by the Register Service Account function, you can associate the provider account and the provider account password with your Smart TV Account. If you associate the account, you will be able to log onto the account through Smart Hub easily, without entering your account name or password. The Change Password function lets you change your Smart Hub password.
Network Services 3. 4. After a few moments, Smart Hub automatically resets. The screen may go black, then Smart Hub re-appears. In a few moments, it starts the re-initialization procedure. To complete the re-initialization, go to Step 4 in Starting Smart Hub for the First Time. (See page 61) 2. Press the ▲▼◄► to select a menu item, and then press the ENTER button. The functions in the Edit Mode Menu bar are described below. ✎✎NOTE `` Some menu items may not appear on the screen.
05 Rename Folder The Move to Folder function lets you move a widget to a folder. To use the Move to Folder function, follow these steps: The Rename Folder function lets you rename folders. To use the Rename Folder function, follow these steps: 1. Press the YELLOW (C) button on your remote. 1. Press the YELLOW (C) button on your remote. 2. Select a widget, and then press the ENTER button. 2. Press the ▲▼◄► to select a folder, and then press the ENTER button. 3.
Network Services Unlock 1. Press the YELLOW (C) button on your remote. 2. Press the ▲▼◄► to select a locked widget, and then press the ENTER button. 3. Press the ▲▼◄► to select Unlock, and then press the ENTER button. The Security window appears. 4. Enter the Parental Security Code (See page 44). If you have not created a Parental Security Code, enter 0000. 5. Press the ENTER button. The Lock Service Released window appears confirming the lock has been release, and then closes.
05 Samsung Apps by category To use the Samsung Apps screen, follow these steps: The following categories are available: 1. Press the ◄► buttons to move to the category list on the left. 2. Press the ▲▼ to highlight a category. In a few seconds, the Samsung Apps screen displays the applications in that category. The Sort tabs appear across the top. 3. Press the ► button to move to the displayed applications or services. 4.
Network Services Using the Colored buttons on your remote with Samsung Apps •• RED (A) (Login) : To log into your Smart TV Account. •• GREEN (B) (Thumbnail/List View) : To toggle applications between Thumbnail and List view. •• BLUE (D) (Sort By) : To sort the applications in a category by Recommended, Most Downloaded, Most Recent, or Name. •• Return : To return to the previous menu. ✎✎ NOTE `` The Internet contents services may be added or deleted by providers without notice.
06 Other information Refer to the chart below when this product does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off the product, disconnect the power cord, and contact the nearest authorized dealer or Samsung Electronics Service Centre. Symptom Check/Remedy I cannot eject the disc. • Is the power cord plugged securely into the outlet? • Turn off the power and then turn it back on. The iPod fails to connect.
Other information Symptom Check/Remedy Aspect ratio cannot be changed. • You can play 16:9 BD/DVDs in 16:9 Wide mode, 4:3 Letter Box mode, or 4:3 Pan - Scan mode, but 4:3 BD/DVDs can be seen in 4:3 ratio only. Refer to the Blu-ray Disc jacket and then select the appropriate function. • The product is not working. (Example: The power goes out or a strange noise is heard.) • Press and hold the romote control's STOP ( @ ) button for 5 seconds in STANDBY mode. • The Product is not working normally.
06 Other information Symptom Check/Remedy PC Share Manager function I can see folders shared through the PC Share Manager, but I cannot see the files. • Since it shows only files corresponding to the Image, Music, and Movie categories, files that do not correspond to these categories may not be displayed. AllShare function Video is played intermittently. • Check if the network is stable. • Check if the network cable is properly connected and if the network is not overloaded.
Other information Specifications General FM Tuner Weight 3.5 kg Dimensions 429.3 (W) x 58.4 (H) x 325.1 (D) mm Operating Temperature Range +5°C to +35°C Operating Humidity Range 10 % to 75 % Signal/noise ratio 55 dB Usable sensitivity 12 dB Total harmonic distortion 0.5 % BD (Blu-ray Disc) Reading Speed : 9.834 m/sec DVD (Digital Versatile Disc) Disc CD : 12cm (COMPACT DISC) CD : 8cm (COMPACT DISC) Composite Video Reading Speed : 6.98 ~ 7.68 m/sec. Approx.
06 Speaker system Speaker 5.1ch speaker system Front Surround Center Impedance 3Ω 3Ω 3Ω Subwoofer 3Ω Frequency range 140Hz~20kHz 140Hz~20kHz 140Hz~20kHz 40Hz ~ 160Hz Output sound pressure level 86dB/W/M 86dB/W/M 86dB/W/M 88dB/W/M Rated input 165W 165W 170W 170W Maximum input 330W 330W 340W 340W Dimensions (W x H x D) Front : 90 x 207.5 x 68.5 mm Surround : 90 x 141.5 x 68.5 mm Center : 360 x 74.5 x 68.5 mm Subwoofer : 214 x 390 x 350 mm Weights Front : 4.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care Center. Area ` North America Contact Center Web Site Canada Mexico U.S.A 1-800-SAMSUNG (726-7864) 01-800-SAMSUNG (726-7864) 1-800-SAMSUNG (726-7864) www.samsung.com www.samsung.com www.samsung.
