Manual
English 37
03 Setup
Digital Output Selection
Setup PCM
Bitstream 
(Unprocessed)
Bitstream 
(Re-encoded 
DTS)
Bitstream
 (Re-encoded 
Dolby D)
Connection
HDMI supported 
AV receiver
HDMI supported 
AV receiver
HDMI supported 
AV receiver
HDMI supported 
AV receiver
Audio Stream on 
Blu-ray Disc
PCM Up to 7.1ch PCM DTS re-encoded
Re-encoded
Dolby Digital *
Dolby Digital Up to 7.1ch Dolby Digital DTS re-encoded
Re-encoded
Dolby Digital *
Dolby Digital Plus Up to 7.1ch Dolby Digital Plus DTS re-encoded
Re-encoded
Dolby Digital *
Dolby TrueHD Up to 7.1ch Dolby TrueHD DTS re-encoded
Re-encoded
Dolby Digital *
DTS Up to 6.1ch DTS DTS re-encoded
Re-encoded
Dolby Digital *
DTS-HD HRA Up to 7.1ch DTS-HD HRA DTS re-encoded
Re-encoded
Dolby Digital *
DTS-HD MA Up to 7.1ch DTS-HD MA DTS re-encoded
Re-encoded
Dolby Digital *
Audio Stream 
on DVD
PCM PCM 2ch PCM 2ch PCM 2ch PCM 2ch
Dolby Digital Up to 5.1ch Dolby Digital Dolby Digital Dolby Digital
DTS Up to 6.1ch DTS DTS DTS
Defi nition for 
Blu-ray Disc
Any
Decodes the main 
feature audio and 
BONUSVIEW audio 
stream together 
into PCM audio and 
adds Navigation 
Sound Effects.
Outputs only the 
main feature audio 
stream so that your 
AV receiver can 
decode the audio 
bitstream.
You will not hear 
BONUSVIEW 
audio or Navigation 
Sound Effects.
Decodes the main 
feature audio and 
BONUSVIEW audio 
stream together 
into PCM audio and 
adds Navigation 
Sound Effects, then 
re-encodes the 
PCM audio into DTS 
bitstream.
Decodes the main 
feature audio and 
BONUSVIEW audio 
stream together into 
PCM audio and adds 
Navigation Sound 
Effects, then re-
encodes the PCM 
audio into Dolby digital 
bitstream or PCM.
* If the Source Stream is 2ch, “Re-encoded Dolby D” Setting are not applied. Ouput will be LPCM 2ch.
Dynamic Range Control
You can listen at low volumes, but still hear dialog 
clearly. This is only active if your product detects 
a Dolby Digital signal.
Auto : The Dynamic Range Control will be set 
automatically based on the information 
provided by the Dolby TrueHD Soundtrack.
•
Off : Movie soundtracks are played using the 
standard Dynamic Range.
On : When Movie soundtracks are played at 
low volume or through smaller speakers, the 
system can apply appropriate compression to 
make low-level content more intelligible and 
prevent dramatic passages from getting too 
loud.
•
•
HT-D5210C_ZA_1224.indd 37HT-D5210C_ZA_1224.indd 37 2011-12-26  11:31:412011-12-26  11:31:41










