HT-AS730S AV Receiver System user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/register HT-AS730S-XAC_0213.
Safety information Safety Warnings TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE REAR COVER (or BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CLASS 1 LASER PRODUCT This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product.
EnG Precautions Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation slots are not covered. Do not stack anything on top of the amplifier.
Features Digital AV Receiver DTS This product is a pure digital AV receiver that performs digital signal processing to minimize signal distortion and loss. Provides a full range of 6 channels by converting a digital PCM or analog stereo signal using DTS digital matrix decoding. Dolby Pro Logic llx SFE (Sound Field Effect) Using 32bit Audio Digital Signal Processing Dolby Pro Logic IIx is a new technology that provides discrete 7.1 channels out of 2 channel or multi channel sources.
EnG Contents 2 3 Safety Warnings Precautions features 4 Accessories description 7 8 10 11 11 12 Front Panel Rear Panel Display Insert Remote Control Batteries Operation Range of the Remote Control Tour of the Remote Control connections 14 16 17 18 19 20 21 22 23 24 25 27 27 Speaker Positioning Connecting the Speakers Connecting the Video Out to your TV Connecting External Devices/your TV via HDMI HDMI Function Connecting a DVD or BD(Blu-Ray) Player Connecting a Cable, Satellite or Set-top Box Con
Contents miscellaneous 56 58 Operating Your TV with the Remote Control Operating Your DVD or BD with the Remote Control troubleshooting 59 Troubleshooting appendix 61 Specifications 56 59 61 HT-AS730S-XAC_0213.
EnG Description 1 Front Panel 2 1 2 ● description 15 14 15 14 13 12 11 10 9 8 7 6 5 4 3 13 12 11 10 9 8 7 6 5 4 3 1 STANDBY/ON button 2 VOLUME Control Adjusts the volume level. 3 SELECT button Used to change the radio frequency or select detailed options in Surround mode. 4 TUNING MODE button Used to select Manual or Auto mode for FM radio. 5 TONE CONTROL button 6 S.DIRECT button 7 SURROUND button 8 7.
Description Rear panel 1 2 3 4 5 6 7 8 IPOD 17 16 15 14 13 12 11 10 9 1 FM Antenna JACK Connect the FM Antenna here. 2 7.1 CH ANALOG AUDIO INPUT JACKS Receives the analog audio signal from an external player with a multi-channel port. 3 VIDEO INPUT JACKS Receives the video signal from a video player (DVD, SAT, TV, VCR). 4 HDMI INPUT JACKS Receives digital video and audio signals simultaneously using an HDMI cable. 5 VCR VIDEO OUTPUT JACK Outputs the video signal to the VCR.
Receives the component video signal. 11 SUBWOOFER AUDIO OUTPUT JACK Connect the subwoofer. 12 CD AUDIO INPUT JACKS Receives the audio signal from an audio CD player. 13 VCR AUDIO OUTPUT JACK Outputs the audio signal to a VCR. 14 AUDIO INPUT JACKS Receives the audio signal from a video player. 15 IPOD INPUT JACK Receives the audio/video signal from an iPod. 16 COAXIAL INPUT JACK (DIGITAL AUDIO IN) Receives the digital coaxial audio signal.
Display 1 2 3 4 5 7 1 SPEAKER INDICATORS Receives the audio/video signal from an iPod. 2 LISTENING MODE INDICATORS Displays the current listening mode. 3 TUNING INDICATORS Displays the status of the current radio broadcasting. 4 AUDIO INPUT INDICATORS Displays the input signal type of the current audio source. 5 VOLUME LEVEL INDICATOR Displays the volume level. 6 RADIO FREQUENCY INDICATOR Displays the current radio frequency range.
M 2. Install two AAA size batteries. Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment. 3. Replace the cover. Assuming typical TV usage, the batteries last for about one year. ● Description 1. Lift the cover at the back of the remote control upward as shown.
Tour of the Remote Control 12 HT-AS730S-XAC_0213.
POWER button Turns the receiver on/off. 2 INPUT MODE button Toggles to select an input mode for the selected source. 3 SLEEP button Used to set the Sleep Timer. 4 NUMBER buttons Used to select a TV channel. 5 SPK LEVEL/ SPK SELECT/ TEST TONE buttons Used to select and adjust the level of a desired speaker. Also used to select the Test Tone function. 6 MO/ST button Select MONO or STEREO for radio broadcasting. 7 TUNER MEMORY button Used to set a preset radio frequency.
Connections This section involves various methods of connecting the AV receiver to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord. Speaker positioning SL SR SBL SBR Position of AV Receiver Place AV Receiver on a dedicated stand or rack. Subwoofer The position of the subwoofer is not so critical. Place it anywhere you like.
EnG Speaker positioning (continued) Center speaker It is best to install it at the same height as the front speakers. You can also install it directly over or under the TV. SBL SBL Surround Speakers SBR SBR SBL SBR ● connections Place these speakers behind your listening position. If there isn't enough room, place these speakers so they face each other. Place them about 2 to 3 feet (60 to 90cm) above your ears, facing slightly downward.
COnneCting tHe SPeakerS FRONT (R) FRONT (L) CENTER ACTIVE SUBWOOFER (BUILT-IN POWER AMPLIFIER) AV RECEIVER SURROUND (R) SURROUND BACK (R) (not supplied) SURROUND SURROUND (L) BACK (L) (not supplied) Connecting Speaker Wire 1. Loosen the knob by turning counterclockwise. 2. Insert the bare part of the wire into the hole in the side of each terminal. 3. Tighten the knob by turning clockwise to secure the wire.
EnG Connecting the Video Out to your TV ● Connections OPTICAL OUT AUDIO OUT VIDEO IN COMPONENT IN Video Connection If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from the Component Video Output (PR, PB and Y) jacks on the back of your AV Receiver to the Component Video Input jacks on your TV. OR Connect the Video cable from the VIDEO OUT (MONITOR) jack on the back of your AV Receiver to the Video Input jack on your TV.
Connecting external devices/YOUR TV Via HDMI HDMI is a digital standard interface for connection to such devices as a TV, projector, DVD player, Blu-ray player, settop box and more. HDMI removes any loss of signal from analog conversion, enabling you to enjoy video and audio sound quality as it was originally created in the digital source. By connecting through the HDMI(High-Definition Multimedia Interface) interface, you can play back digital video and audio.
EnG HDMI FUNCTION Using Anynet+(HDMI-CEC) Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control. Anynet + can be used by connecting this AV Receiver to a SAMSUNG TV using an HDMI Cable. This is only available with SAMSUNG TVs that support Anynet+. 1. Connect the AV receiver to a Samsung TV with an HDMI cable. (See page 18) ● Connections 2. Set the Anynet+ function on your TV. (See the TV instructions manual for more information.
Connecting a DVD or BD(Blu-Ray) Player DVD or BD Player OPTICAL OUT AUDIO OUT VIDEO OUT COMPONENT OUT VIDEO IN or COMPONENT IN or or Video Connection Connect a Component video cable(not supplied) from the COMPONENT IN (DVD) (PR, PB and Y) jacks on the back of your AV Receiver to the Component Video Output jacks on your DVD/BD player. OR Connect a Video cable from the VIDEO IN (DVD) jack on the back of your AV Receiver to the Video Output jack on your DVD/BD player.
EnG Connecting a Cable, Satellite or Set-top box SAT(Cable/Satellite/Set-top box) AUDIO OUT VIDEO OUT COMPONENT OUT VIDEO IN or ● Connections OPTICAL OUT COMPONENT IN or or Video Connection Connect a Component video cable(not supplied) from the COMPONENT IN (SAT) (PR, PB and Y) jacks on the back of your AV Receiver to the Component Video Output jacks on your SAT. OR Connect a Video cable from the VIDEO IN (SAT) jack on the back of your AV Receiver to the Video Output jack on your SAT.
COnneCting a VCr VCR AUDIO OUT VIDEO OUT VIDEO IN AUDIO IN VIDEO IN (For playback) (For recording) Video Connection for playback Connect a Video cable from the VIDEO IN (VCR) jack on the back of your AV Receiver to the Video Output jack on your VCR. for recording Connect a Video cable from the VIDEO OUT (VCR) jack on the back of your AV Receiver to the Video Input jack on your VCR. audio Connection for playback Connect AUDIO IN (VCR) on your AV Receiver to the Audio Out of the VCR.
EnG Connecting a CD player CD player ● Connections AUDIO OUT COAXIAL OUT or Audio Connection Connect the Digital Input (COAXIAL) on your AV Receiver to the Digital Output of the CD Player. OR Connect AUDIO IN (CD) on your AV Receiver to the Audio Out of the CD player. M` If the external component has only one audio output jack, connect it to either the right or left audio input jack of the main unit. Connect the audio cable's red plug to the red jack and white cable to the white jack.
Connecting 7.1 channel devices You can connect the AV receiver to a DVD player, SUPER AUDIO CD player or other device with 7.1 channel output. SW C SW FRONT SURROUND C SUB CENTER WOOFER SURROUND BACK 5.1 CH 7.1 CH 7.1 Channel device 24 HT-AS730S-XAC_0213.
You can listen to the audio from an iPod through the main unit. For iPod operation with your receiver, see pages 26 and 54 ~ 55. EnG Connecting an iPod ● connections IPOD 1. Connect the iPod dock connector to the iPod jack on your reciever. . Place the iPod in the Dock. ~ If you want to play a movie stored in your iPod player, you should set the player's TV Out option to On before inserting it into the dock. See page 53. . Press the IPOD button on the remote control.
Connecting an iPod (Continued) iPod models that are compatible with HT-AS730S M` “Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. ` Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. iPod is a trademark of Apple Inc., registered in the U.S. and other countries. 26 HT-AS730S-XAC_0213.
ENG COnneCting tHe fM antenna 1. Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal as a temporary measure. 2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface. ● COnneCtiOnS FM antenna (supplied) M ` Do not place the antenna cable close to the power cord. Keep it as far away as possible. ` If you experience poor FM reception, use an external antenna.
Setup For your convenience, you can set this AV receiver's features for the best use. Setup MENU TREE Here’s a quick look at how the setup menus are organized on your AV Receiver. INPUT DVD OPTICAL 1,2,3 COAXIAL OPTICAL 1,2,3 COAXIAL OPTICAL 1,2,3 COAXIAL OPTICAL 1,2,3 COAXIAL OPTICAL 1,2,3 COAXIAL SAT TV CD AUX SPEAKER SURROUND OPTION 28 HT-AS730S-XAC_0213.
EnG Setup MENU TREE (Continued) INPUT SPEAKER SPEAKER SIZE ● setup FRONT LARGE SMALL LARGE SMALL NONE LARGE SMALL NONE LARGE SMALL NONE ON OFF CENTER SURROUND SURROUND BACK SUBWOOFER CROSS OVER 60Hz, 80Hz, 100Hz, 120Hz, 150Hz, 180Hz, 200Hz SPEAKER DISTANCE FRONT LEFT FRONT RIGHT CENTER SURROUND LEFT SURROUND RIGHT 1 ~ 30 feet (1 foot steps) , default : 10 feet SURROUND BACK LEFT SURROUND BACK RIGHT SUBWOOFER SPEAKER LEVEL FRONT LEFT FRONT RIGHT CENTER SURROUND LEFT SURROUND RIGHT -10.
Setup MENU TREE (Continued) INPUT SPEAKER SURROUND STEREO STEREO MULTI CH STEREO PL IIx MODE Movie Music OFF ON Game Matrix PL PANORAMA DIMENSION -7 ~ STD ~ +7 CENTER WIDTH 0~7 SFE HALL1 HALL2 JAZZ CLUB CHURCH ROCK CLASSIC LIVE GAME MOVIE NEO:6 NEO:6 MODE MUSIC CINEMA CENTER IMAGE 0~7 EX/ES AUTO OFF ON TONE CONTROL TONE SET OFF ON BASS -6dB ~ +6dB (1dB Step) TREBLE -6dB ~ +6dB (1dB Step) OPTION 30 HT-AS730S-XAC_0213.
EnG Setup MENU TREE (Continued) INPUT SPEAKER SURROUND OPTION ● setup A/V Sync Delay 0 ~ 200mS (10mS Step) MP3 ENHANCER OFF ON OFF ON SMART VOLUME ASC SETUP Auto Setup DRC Max Std Min HDMI SETUP AUTO LIPSYNC ON OFF AVR TV On Off HDMI Audio Anynet+ 31 HT-AS730S-XAC_0213.
INPUT SETUP Selecting a source device and connection jack Select the external devices you have connected to the receiver. 1. Press SETUP/MENU button ~ “INPUT” appears on the display and goes into Setup Mode. 2. Press the ▶ button to select a desired device. 3. Press the ▲ or ▼ button to select a desired jack. - To exit setup mode ~ Press SETUP/MENU, EXIT or RETURN button. “SETUP OFF” appears on the display and Setup Mode is exited.
EnG SPEAKER SETUP Setting the speaker size Signal outputs and frequency response from the speaker will be adjusted according to your speaker configuration and whether certain speakers are used or not. 2. Press ▲▼ button to select “SPEAKER”, and then press the ENTER. ● setup 1. Press SETUP/MENU button. ~ “INPUT” appears on the display. 3. Press ▲▼ button to select “SPK SIZE”, and then press the ENTER or ▶ button. 4. Press ◀▶ button to select the speaker you want.
SPEAKER SETUP (Continued) Setting the speaker listening distance If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the center and surround speakers. 1. Press SETUP/MENU button. ~ “INPUT” appears on the display and goes into Setup Mode. 2. Press ▲▼ button to select "SPEAKER", and then press the ENTER. 3. Press ▲▼ button to select "SPK DISTANCE", and then press the ENTER or ▶ button. 4.
EnG SPEAKER SETUP (Continued) Setting the speaker level You can set the balance and level of speakers. 1. Press SETUP/MENU button. ~ “INPUT” appears on the display and goes into Setup Mode. 3. Press ▲▼ button to select "SPK LEVEL", and then press the ENTER or ▶ button. 4. Press ◀▶ button to select the speaker you want. ~ Each time you press this button, F.L F.R CEN S.L S.R SBL SBR S.W will be selected in turn. 5. Press ▲▼ button to set the speaker mode.
SPEAKER SETUP (Continued) Setting the test tone Use the test tone to check the speaker connection status or level. 1. Press SETUP/MENU button. ~ “INPUT” appears on the display and goes into Setup Mode. 2. Press ▲▼ button to select "SPEAKER", and then press the ENTER. 3. Press ▲▼ button to select "TEST TONE", and then press the ENTER or ▶ button. 4. Press ▲▼ button to select the option you want, and then press the ENTER or ▶ button. ~ AUTO : Test signal will be automatically output as follows; F.L CEN S.
EnG SURROUND SETUP Setting the stereo mode You can select this mode when listening to sound through the front left and right speakers and subwoofer. ● setup 1. Press SETUP/MENU button. ~ “INPUT” appears on the display and goes into Setup Mode. 2. Press ▲▼ button to select "SURROUND", and then press the ENTER. 3. Press ▲▼ button to select "STEREO", and then press the ENTER or ▶ button. 4. Press ▲▼ button to set STEREO mode you want. ~ STEREO:2CH : Select this for 2 CH stereo output.
SURROUND SETUP (Continued) Setting Dolby Pro Logic II X mode This mode provides 7.1 channel sound from 2 channel sources. 1. Press SETUP/MENU button. ~ “INPUT” appears on the display and goes into Setup Mode. 2. Press ▲▼ button to select "SURROUND", and then press the ENTER. 3. Press ▲▼ button to select "PL II x", and then press the ENTER or ▶ button. 4. Press ▲▼ button to select the option you want, and then press the ENTER or ▶ button.
EnG SURROUND SETUP (Continued) Setting SFE(Sound Field Effect) mode The SFE (Sound Field Effect) function uses 9 different DSP sound field effects to digitally simulate actual music environments such as concert halls or cinemas. 2. Press ▲▼ button to select "SURROUND", and then press the ENTER. 3. Press ▲▼ button to select "SFE", and then press the ENTER or ▶ button. 4. Press ▲▼ button to set the Sound Field Effect you want.
SURROUND SETUP (Continued) Setting EX/ES mode When surround back speakers are connected, you can listen to 6.1 or 7.1 multi-channel sound using the built-in Dolby Digital Surround EX or DTS ES decoder. This function works when a Dolby Digital or DTS source (such as a DVD player) is input, and does not work with L.PCM and Dolby Digital 2 channel sources. 1. Press SETUP/MENU button. ~ “INPUT” appears on the display and goes into Setup Mode. 2. Press ▲▼ button to select "SURROUND", and then press the ENTER. 3.
EnG SURROUND SETUP (Continued) Setting Tone Control This will enable you to adjust the bass and treble level. 1. Press SETUP/MENU button. ~ “INPUT” appears on the display and goes into Setup Mode. 3. Press ▲▼ button to select "TONE CONTROL", and then press the ENTER or ▶ button. 3. Press ▲▼ button. ~ Each time you press this button, TONE SET BASS TREBLE will be selected in turn. ~ If it is set to TONE: OFF, the Tone Control function will be disabled.. ● setup 2.
option setup The Option menu enables you to make different audio settings to enhance your AV receiver experience. 1. Press SETUP/MENU button. ~ “INPUT” appears on the display and goes into Setup Mode. 2. Press ▲▼ button to select the “OPTION”, and then press the ENTER. 3. Press ▲▼ ◀▶ button to set the OPTION you want. AV SYNC Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to match the video.
EnG option setup (Continued) ASC (Auto Sound Calibration) By setting the ASC function just once when you relocate or install the unit, you can have the unit automatically recognize the distance between speakers, levels between channels, and frequency characteristics to create a 7.1-channel sound field optimized for your environment. 1. Plug the ASC microphone into the ASC input jack. . Press SETUP/MENU button. ● setup 2. Place the ASC microphone at the listening position. .
option setup (Continued) DRC You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.DRC compresses the audio to make the loudest sounds quieter and the quietest sounds louder. ~ Each time you press ▲▼ button, DRC : STD DRC : MIN DRC : MAX will be selected in turn. Setting DRC ~ STD : Sets DRC effect to standard. ~ MAX : Sets DRC effect to maximum. ~ MIN : Sets DRC effect to minimum.
EnG Operation Before using the AV receiver Turning On/Off ● Operation Connect the power plug to the outlet. Press the POWER button of the remote control. ~ This unit will be turned on or set to Standby mode. Remote control functions You can operate your AMP (this AV receiver), TV, DVD and BD player with this remote control. See pages 56 ~ 58 for more details. To select a function Method 1 Press the Function button. ~ Each time you press this button, FM DVD SAT TV VCR CD AUX 7.
Selecting digital/analog Input You can listen to sound in 2 channel analog , Dolby Digital or DTS using this unit. Press the INPUT MODE button on the remote control to select the external device you have connected. ~ Each time you press this button, input mode changes as follows: For DVD/SAT function or For CD function For AUX function M ` You can also change input mode by pressing the INPUT MODE button on the front of your AV Receiver.
EnG Using the SURROUND modes Using the NEO:6 MODE button Press NEO:6 MODE button.~ Each time you press this button, MUSIC CINEMA will be selected in turn. ● Operation Using the SFE MODE button Press SFE MODE button. ~ Each time you press this button, HALL 1 HALL 2 J.CLUB CHURCH ROCK CLASSIC LIVE GAME will be selected in turn. Using the MODE button Press MODE button. ~ Each time you press this button, MOVIE MUSIC GAME MATRIX PL will be selected in turn. Using the 1.
Using the SURROUND modes (Continued) Using the SURROUND button on the front of the main unit Selecting the NEO:6 mode 1. Press SURROUND button briefly to select “NEO:6” mode. ~ Each time you press this button, STEREO PLIIx NEO:6 SFE will be selected in turn. 2. Press SELECT ( .,, ) button. ~ Each time you press this button, MUSIC CINEMA will be selected in turn. Selecting the SFE mode 1. Press SURROUND button to select ‘SFE’ Mode.
EnG Using the SURROUND modes (Continued) Surround Mode and Input Signal Chart o = active, – = inactive Input Signal Decoding DOLBY (MUSIC, CINEMA, MATRIX, GAME, PRO LOGIC) Dolby D Surr. EX Dolby D (5.1ch) Dolby D (2ch) Dolby D (2ch Surr) L.PCM (Audio) Analog L.PCM (Audio) Analog Dolby D (2ch) Dolby D (2ch Surr) Dolby D (2ch) Dolby D (2ch Surr) L.PCM (Audio) Analog Dolby D Surr. EX Dolby D (5.1ch) DTS-ES DTS (5.1ch) Dolby D (2ch) Dolby D (2ch Surr) L.PCM (Audio) L.PCM 96KHz Analog Dolby Digital 5.
USING THE SPEAKER ADJUSTMENT BUTTONS Using the SPK SELECT button 1. Press SPK SELECT button to select the speaker you want. ~ Each time you press this button, FRONTCEN SURR S.BACK S.W CROVR SPK MODE OFF will be selected in turn 2. Press ▲▼ button to set the mode (Large, Small etc.) for the selected speaker. ~ Repeat steps 1-2 to set the mode for each speaker. Using the SPK LEVEL button 1. Press SPK LEVEL button to select the speaker you want. ~ Each time you press this button, F.L F.
EnG LISTENING to the Radio You can listen to the radio by using either automatic or manual tuning. 1. Press TUNER button. M` ● Operation 2. Selected frequency. ~ Automatic tuning 1 : 1) Press TUNING MODE button to select PRESET. 2) Press TUNING/CH ( .,, ) button to select the preset frequency. ~ Automatic tuning 2 : 1) Press TUNING MODE button to select MANUAL 2) Press and hold TUNING/CH ( .,, ) button to automatically tune in frequency. ~ Manual tuning : 1) Press TUNING MODE button to select MANUAL.
Using AN iPod You can enjoy playback of your iPod using the supplied remote control. Listening to Music (IPOD audio function) You can play music files stored in the iPod player by connecting it to the AV receiver. 1. Connect the iPod dock connector to the iPod jack on the AV Receiver. 2. Place the iPod in the Dock. ~ Your iPod is automatically turned on. 3. Press the FUNCTION button on the remote control to select IPOD mode. ~ Press the FUNCTION button until IPOD AUDIO is selected 4.
EnG Using AN iPod (Continued) Watching a Movie (IPOD Video function) You can play video files stored in the iPod player by connecting it to the AV receiver. ● Operation 1. Connect the iPod dock connector to the iPod jack on the AV receiver. 2. In the iPod screen, move to Videos > Settings and set the TV Out option to On. 3. Place the iPod in the Dock. 4. Press the FUNCTION button on the remote control to select IPOD mode.
Convenient functions Sleep timer function You can set the time that this unit will shut itself off. Press SLEEP button. ~ SLEEP : OFF 15 30 45 60 90 120 M (MIN) will be selected in turn. To check sleep timer Press the SLEEP button. ~ The remaining time before this unit will shut itself off is shown on the display. ~ Pressing the button again changes the sleep time from what you set previously. To cancel sleep timer ~ Press SLEEP button until “SLEEP : OFF” appears on the display.
EnG Convenient functions (Continued) Adjust the display You can adjust the brightness of the display. Press the DIMMER button. ~ Each time you press this, the brightness changes as follows : DARK BRIGHT. ● Operation Using headphones Use headphones (not supplied) for private listening pleasure. Connect the headphones to the headphone jack and listen to music. M` Do not turn the volume up too high when you use headphones as It may damage your hearing. 55 HT-AS730S-XAC_0213.
Miscellaneous Operating your TV with the remote control 1. Press POWER button to turn on the TV. 2. Press TV button to set the remote to TV mode. 3. Point the remote control toward the TV. 4. While holding down POWER button, enter the code corresponding to your brand of TV. ~ If there is more than one code listed for your TV in the table, enter one at a time to determine which code works. ~ If the code matches the TV's code, the TV will be turned off. 5.
EnG Operating your TV with the remote control (Continued) TV Brand Code List Brand Code Number Brand Luxman LXI (Sears) AOC Bell & Howell (M.
Operating your DVD or BD player with the remote control 1. Press POWER button to turn on the DVD (BD) player. 2. Press DVD (BD) button to set the remote to DVD (BD) mode. ~ If you operate VCR, press VCR button to set the remote to VCR mode. 3. Point the remote control toward the DVD (BD). 4. While holding down POWER button, enter the code corresponding to your brand of DVD (BD). ~ If there is more than one code listed for your DVD (BD) in the table, enter one at a time to determine which code works.
EnG Troubleshooting Before requesting service, please check the following. Symptom Check Remedy • I s the power cord plugged into the outlet? • Connect the power plug to the outlet. A function does not work when the button is pressed. • Is there static electricity in the air? • Disconnect the power plug and connect it again. Sound is not produced.
Symptom There is no sound from surround back speakers Check • Are the surround back speakers connected properly? • Is the S.BACK(Surround Back) selected to NONE in Speaker Setup? • Is Surround Mode set to EX/ES? Remedy • Refer to pages 14 ~16 to connect it properly. • Refer to page 33 to select LARGE or SMALL. • Refer to page 40 to set Surround Mode to EX/ES. Can't select EX/ES mode. • Is S.
EnG Appendix Specifications 120V, 60 Hz Standby power consumption 0.9W Power consumption GENERAL FM TUNER AMPLIFIER FREQUENCY RESPONSE HDMI VIDEO OUTPUT Main unit 75W Subwoofer 90W Weight 12.7 Ibs Dimensions (W x H x D) 16.9 x 5.7 x 13.7 inches Operating temperature range 41°F~+95°F Operating humidity range 10%~75% Frequency response 87.5~108.0MHz Usable sensitivity 12dBf S/N ratio MONO/STEREO 55/55dB Distortion MONO/STEREO 0.3/0.
LIMITED WARRANTY TO ORIGINAL PURCHASER Samsung Electronics Canada Inc.(SECA), warrants that this product is free from defective material and workmanship. SECA further warrants that if this product falls to operate properly within the specified warranty period and the failure is due to improper workmanship or defective materials, SECA will repair or replace the product at its option. All warranty repairs must be performed by a SECA Authorized Service Center.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Region North America Latin America Europe CIS Asia Pacific Country HT-AS730S-XAC_0213.
Code No. AH68-02174S HT-AS730S-XAC_0213.
