BN68-00263B-cover 1/12/06 12:31 PM Page 3 Owner’s Instructions HPL5025
BN68-00263B-1 1/12/06 10:52 AM Page 2 Warning! Important Safety Instructions CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product. This symbol alerts you that important literature concerning operation and maintenance has been included with this product.
BN68-00263B-1 1/12/06 10:52 AM Page 3 Thank You for Choosing Samsung Thank you for choosing Samsung! Your new Samsung product represents the latest in television technology. We designed it with easy-to-use on-screen menus and closed captioning capabilities, making it one of the best products in its class. We are proud to offer you a product that will provide convenient, dependable service and enjoyment for years to come. Important Safety Information Always be careful when using your Monitor.
BN68-00263B-1 1/12/06 10:52 AM Page 4 • Protect the power cord. Power supply cords should be routed so that they won’t be walked on or pinched by objects placed on or against them. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit. • Unplug the Monitor from the wall outlet and disconnect the antenna or cable system during a lightning storm or when left unattended and unused for long periods of time.
BN68-00263B-1 1/12/06 10:52 AM Page 5 FCC Information User Instructions Warning The Federal Communications Commission Radio Frequency Interference Statement includes the following warning: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
BN68-00263B-1 1/12/06 10:52 AM Page 6 Important Warranty Information Regarding Television Format Viewing Wide screen format PDP Displays (16:9,the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video.The images displayed on them should primarily be in the wide screen 16:9 ratio format,or expanded to fill the screen if your model offers this feature,and constantly moving.
BN68-00263B-1 1/12/06 10:52 AM Page 7 Table of Contents Setup Connecting PC and Operation Your New Plasma Display Panel ........................10 Connecting to a PC..........................................44 Remote Control Buttons ....................................12 Adjusting the PC Screen ..................................48 Wall Installation Instructions ..............................14 Changing the Position of the Image....................49 Turning the PDP On and Off....................
BN68-00263B-1 1/12/06 10:52 AM Page 8
BN68-00263B-1 1/12/06 10:52 AM Page 9 P L A S M A D I S P L A Y P A N E L Setup Your New Plasma Display Panel ....................................................10 Remote Control Buttons ................................................................12 Wall Installation Instructions ..........................................................14 Turning the PDP On and Off ..........................................................
BN68-00263B-1 1/12/06 10:52 AM Page 10 Your New Plasma Display Panel Front Panel Speakers POWER Press to turn the PDP on and off. SOURCE, MENU, VOLUME (-,+), SELECT (▼,▲), MUTE Remote Control Signal Receiver Aim the remote control towards this spot on the Monitor.
BN68-00263B-1 1/12/06 10:52 AM Page 11 Rear Panel Œ External Speaker Out jacks Connect external speakers. ´ RGB Input 1 jack (15pin) Connect to the video output jack on your PC. ˇ RGB Input 2/Component Video Input jacks (H/V/R/G/B, Y/Pb/Pr) RGB input2/Component video input jacks are BNC connectors. ¨ Video Input jack Connect a video signal from external sources like VCRs or DVD players. ˆ S-Video Input jack Connect a S-Video signal from an S-VHS VCRs or DVD players.
BN68-00263B-1 1/12/06 10:53 AM Page 12 Remote Control Buttons Remote Control Œ Power button Turns the PDP on and off. ´ Number buttons ˇ Display button Press to display information on the PDP screen. ¨ Menu button Displays the main on-screen menu. ˆ CH (Channel) and VOL (Volume) buttons Channel and Volume buttons are used for selecting menu item in menu mode. Ø Mute button Press to mute the PDP sound. ∏ P.
BN68-00263B-1 1/12/06 10:53 AM Page 13 ı VCR control buttons Controls VCR tape functions: Stop, Rewind, Play/Pause, Fast Forward. ˜ SET button S.Sel Use during setting up of this remote control, so that it will work compatibly with other devices (VCR, cable box, DVD, etc.) ¯ Clock set button Press to clock setting. ˘ PIP control buttons Source : Press to select one of the available signal sources for the PIP window. S.Sel : Press to select the Audio (PIP or Main).
BN68-00263B-1 1/12/06 10:53 AM Page 14 Wall Installation Instructions Installation Notes 1 2 Do not install the PDP on any place other than vertical walls. To protect the performance of the PDP and prevent troubles, avoid the following. • • • • 3 4 Do Do Do Do not not not not install install install install next to smoke and fire detectors. in an area subjected to vibration. in an area subjected to high voltage. near or around any heating apparatus. Use only recommended parts and components.
BN68-00263B-1 1/12/06 10:53 AM Page 15 Installing the Display on the Wall Attachment Panel 1 See the drawing of the wall attachment panel shown in page 14 to check for the stability of the wall where the PDP is to be installed. If the wall is not enough strong to support the PDP, strengthen the wall before installation. 2 Fix the wall attachment panel on the wall using bolts as shown in the following figure: Fixing bolts must protrude from the wall appox. 0.6 inches.
BN68-00263B-1 1/12/06 10:53 AM Page 16 4 Remove six large screws from the rear side of the display. 5 Insert the bolts, dish-type washers, and insulation holder into the six screwholes as shown in the following figure: Œ Bolt ´ Insulation holder 6 Hang the protruding plastic part on the rear of the PDP up the groove on the top of the wall attachment panel. Then, lift down the PDP. (Do not lift down the PDP with too much force. The protruding plastic part might be taken off.
BN68-00263B-1 1/12/06 10:53 AM Page 17 Separating the Display from the Wall Attachment Panel After lifting the PDP up, pull it forward and remove it from the wall attachment panel.
BN68-00263B-1 1/12/06 10:53 AM Page 18 Turning the Monitor(PDP) On and Off Turning the Monitor(PDP) On and Off Press the Power button on the remote control. The PDP will be turned on and you will be ready to use it’s features. You can also use the Power button on the front of the PDP. Notes: • If your Monitor isn’t turned on when the power button is pressed: Press the MODE button to check if the Monitor mode has been chosen ( ).
BN68-00263B-1 1/12/06 10:53 AM Page 19 Displaying Status Information Press the Display button on the remote control. The PDP will display the Screen size, Resolution, Current time, and screen mode. DISPLAY Main SUB P.MODE Scaling S.MODE Resolution : Video : Not Available : Custom : Wide : Custom : 720 X 480 60Hz Displaying Clock Press the Clock Display button on the remote control. The Current time will be displayed on the screen.
BN68-00263B-2 1/12/06 11:17 AM Page 20
BN68-00263B-2 1/12/06 11:17 AM Page 21 P L A S M A D I S P L A Y P A N E L Connection (Connecting Speakers / Receiver) Connecting Speakers ....................................................................22 Connecting a VCR/Cable Box ......................................................23 Connecting a DVD/Set-Top Box ....................................................
BN68-00263B-2 1/12/06 11:18 AM Page 22 Connecting Speakers Speaker Audio Cable ✱ The speakers MUST have more than 7watts rating (impedance 8ohm). How to Connect Connect the speaker audio cable to the external speaker output jack on the rear of the PDP matching the “+” and “-” ends of the cable with the diagram on the PDP. Connecting PDP and Speakers / Stand and Speakers 1 2 Fix the bracket onto the guide pole located on the rear of speaker and fasten the screws.
BN68-00263B-2 1/12/06 11:18 AM Page 23 Connecting a VCR/Cable Box Power Plug Audio Cable S-Video Cable Video Cable How to Connect 1 2 Connect Video/S-Video cable between the Video/S-Video Output jack on the VCR/Cable box and the Video Input jack on the PDP. • For better video, you can use a S-Video cable. • You can attach the Ferrite Cores(supplied) to the both jacks of the Video cable. Simply set the Ferrite Cores right under the jacks.
BN68-00263B-2 1/12/06 11:18 AM Page 24 Connecting a DVD/Set-Top Box Power Plug Video (Y, Pb, Pr) Cable Audio Cable How to Connect 1 Connect a Video cable between the DVD/Set-Top Box (Y,Pb,Pr) Output jacks on the DVD/SetTop Box and the Component1/2 Video Input (Y,Pb,Pr) Input jacks on the PDP. • You can attach the Ferrite Cores(supplied) to the both jacks of the Video cable. Simply set the Ferrite Cores right under the jacks.
BN68-00263B-2 1/12/06 11:18 AM Page 25 P L A S M A D I S P L A Y P A N E L Picture Control Customizing the Picture ................................................................26 Using Automatic Picture Settings ....................................................27 Viewing the Picture-in-Picture..........................................................28 Changing the Screen Size ............................................................31 Freezing the Picture ....................
BN68-00263B-2 1/12/06 11:18 AM Page 26 Customizing the Picture You can use the on-screen menus to change the Brightness, Contrast, Sharpness, Color, and Tint settings of your PDP. 1 Press the Menu button, then press the joystick to enter. VIDEO Select Contrast Brightness Sharpness Color Tint R 50 Move 2 Move the joystick left or right to select the “Custom”. You will also see the items “Contrast”, “Brightness”, “Sharpness”, “Color” and “Tint”.
BN68-00263B-2 1/12/06 11:18 AM Page 27 Using Automatic Picture Settings Your PDP has automatic picture settings that allow you to adjust the video display easily. 1 Press the Menu button, then press the joystick to enter. ! Quick way to access the picture setting: Just press “P.Mode” on the remote control. VIDEO Select Contrast Brightness Sharpness Color Tint R 50 Move 2 Move the joystick left or right to select the “Custom”, “Standard”, or “Mild” picture setting.
BN68-00263B-2 1/12/06 11:18 AM Page 28 Viewing the Picture-in-Picture Selecting the PIP Screen 1 Press the Menu button. Move the joystick up or down to select the “PIP”, then press the joystick to enter. PIP Select ! Quick way to access the PIP: Just press “PIP” on the remote control. Move 2 Off Move the joystick left or right to select the “On”. The PIP image will appear in the corner of the screen. Enter Exit PIP Select On Locate Source Move 3 Press the Menu button to exit.
BN68-00263B-2 1/12/06 11:18 AM Page 29 Selecting an External Signal You can use PIP to view a signal from an external source, such as a VCR. 1 Press the Menu button. Move the joystick up or down to select the “PIP”, then press the joystick to enter. ! PIP Select Locate Source Quick way to access the PIP source: Just press “Source” in the cover on the remote control. Move 2 Move the joystick up or down to select the “Source”, then move the joystick left or right to enter.
BN68-00263B-2 1/12/06 11:18 AM Page 30 Changing the Location of the PIP Image 1 Press the Menu button. Move the joystick up or down to select the “PIP”, then press the joystick to enter. ! 2 PIP Select On Locate Source Quick way to access the PIP location: Just press “Locate” on the remote control. Move Adjust Move the joystick up or down to select the “Locate”. Exit PIP Select On Locate Source Move 3 Move the joystick to move the PIP screen where you want.
BN68-00263B-2 1/12/06 11:18 AM Page 31 Changing the Screen Size (When entering the Video mode) When you press the Aspect button on the remote control, the PDP’s screen mode should appear in sequence. The screen displays in this order: Wide, Panorama, Zoom1, Zoom2, Stretch, 4:3. Note • If you watch a still image or the 4:3 mode for a long time, image may be burned onto the screen, view the monitor in wide mode or panorama mode as possible. Wide Zoom2 Sets the picture to 16:9 wide mode.
BN68-00263B-2 1/12/06 11:18 AM Page 32 Freezing the Picture Still Press the Still button on the remote control to freeze a moving picture into a still one. Press again to cancel.
BN68-00263B-2 1/12/06 11:18 AM Page 33 P L A S M A D I S P L A Y P A N E L Sound Control Customizing the Sound ................................................................34 Using Automatic Sound Settings ....................................................35 Using the Surround ......................................................................
BN68-00263B-2 1/12/06 11:18 AM Page 34 Customizing the Sound 1 Press the Menu button. Move the joystick up or down to select the “AUDIO”, then press the joystick to enter. SOUND Select Treble Bass Balance Surround Move 2 Move the joystick left or right to select the “Custom”. You will also see the items “Treble”, “Bass”, “Balance” and “Surround”. Move the joystick up or down to select the item you wish to change.
BN68-00263B-2 1/12/06 11:18 AM Page 35 Using Automatic Sound Settings 1 Press the Menu button. Move the joystick up or down to select the “AUDIO”, then press the joystick to enter. ! Quick way to access the sound setting: Just press “S.Mode” on the remote control. SOUND Select Treble Bass Balance Surround Move 2 Move the joystick left or right to select the “Custom”, “Standard”, “Music”, “Movie” or “Speech” sound setting.
BN68-00263B-2 1/12/06 11:18 AM Page 36 Using the Surround 1 Press the Menu button. Move the joystick up or down to select the “AUDIO”, then press the joystick to enter. SOUND Select Treble Bass Balance Surround Move 2 Move the joystick up or down to select the “Surround”, then move the joystick left or right to select the “Concert”, “Hall” or “Stadium”. 3 36 50 50 0 Off Adjust Exit SOUND Select Treble Bass Balance Surround Move Press the Menu button to exit.
BN68-00263B-2 1/12/06 11:18 AM Page 37 P L A S M A D I S P L A Y P A N E L Time Setting Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 Setting the Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 Setting the Timers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BN68-00263B-2 1/12/06 11:18 AM Page 38 Setting the Clock This PDP has a built-in clock that will appear on screen when you press the Clock Display button on the remote control. Setting this clock also allows you to use it to automatically turn the PDP On or Off. 1 Press the Menu button. Move the joystick up or down to select the “TIME”, then press the joystick to enter.
BN68-00263B-2 1/12/06 11:18 AM Page 39 Setting the Sleep Timer You can set your PDP to automatically turn off after a preset interval. 1 Press the Menu button. Move the joystick up or down to select “TIME”, then press the joystick to enter. ! 2 Quick way to access the sleep timer: Just press “Sleep” on the remote control. Move the joystick up or down to select the “Sleep”, then move the joystick left or right.
BN68-00263B-2 1/12/06 11:18 AM Page 40 Setting the Timers This PDP can be set to turn on or off automatically at specific times that you choose. Before using the timers, you must set the PDP’s clock, as described previously. Setting the On/Off Timer 1 Press the Menu button. Move the joystick up or down to select the “TIME”, then press the joystick to enter.
BN68-00263B-2 1/12/06 6 11:18 AM Page 41 Move the joystick up or down to select “Off”, then move the joystick left or right to select “On”. TIME Clock 10 : 30 AM On time 6 : 30 AM On Off time 12 : 00 AM Off On time volume 10 Sleep Timer Off Clock Display Adjust 7 If you want to set the Off Time, move the joystick down to select the “Off Time”. Set the “Off Time” just as you set the “On Time”.
BN68-00263B-3 1/12/06 11:19 AM Page 42
BN68-00263B-3 1/12/06 11:19 AM Page 43 P L A S M A D I S P L A Y P A N E L Connecting PC and Operation Connecting to a PC ......................................................................44 Adjusting the PC Screen ................................................................48 Changing the Position of the Image ................................................49 Changing the Size of the Image ....................................................50 Enlarge of the Image (Zoom).....
BN68-00263B-3 1/12/06 11:19 AM Page 44 Connecting to a PC This PDP set is not compatible with Macintosh PC. Power Plug PC (15pin) Cable BNC Cable Audio Cable Connecting a PC to the PDP 1 2 Connect a PC (15pin) or BNC cable between the Video Output jack on the PC and the RGB1 (15p D-SUB) or RGB2 on the PDP. • You can attach the Ferrite Cores to each jack of the BNC cable. • For an explanation of Component video, see your PC owner’s instruction.
BN68-00263B-3 1/12/06 11:19 AM Page 45 Pin Configuration • 15Pin Signal Cable (based on protruded pin) Setting up Your Monitor Plug and Play Our adoption of the new VESA Plug and Play solution eliminates complicated and time consuming setup. It allows you to install your monitor in a Plug and Play compatible system without the usual hassles and confusion. Your PC system can easily identify and configure itself for use with your display.
BN68-00263B-3 1/12/06 11:19 AM Page 46 How to Set up Your Display Setting (Windows only) Notes: The plasma panel of this monitor is composed 1366 pixels & 768 lines. That is, the best resolution of this monitor is 1366 X 768. Thus, select 1366 X 768 resolution in same way as below when you control the display setting, If your video card does not support 1366 X 768 resoution, the resolution of 1024 X 768 is recommended. If you select one of resolutions above, you can use this monitor in best condition.
BN68-00263B-3 1/12/06 11:19 AM Page 47 Notes: Both screen position and size will vary, depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported: Video signal Dot X Line Vertical Frequency (Hz) Horizontal Frequency (kHz) Vertical polarity Horizontal polarity 640 X 350 70.086 31.469 N P 85.080 37.861 N P 85.080 37.861 P N 640 X 400 720 X 400 640 X 480 IBM PC / AT Compatible 848 X 480 800 X 600 1024 X 768 70.087 31.
BN68-00263B-3 1/12/06 11:19 AM Page 48 Adjusting the PC Screen Adjusting the R.G.B Preset: • Press the RGB button to select the PC mode. 1 Press the Menu button, then press the joystick to enter. VIDEO Select Contrast Brightness Color Control Move 2 Move the joystick up or down to select the “Color Control”, then move the joystick left or right to enter.
BN68-00263B-3 1/12/06 11:19 AM Page 49 Changing the Position of the Image After connecting the PDP to your PC, adjust the position of screen if it is not well-aligned. Preset: • Press the RGB button to select the PC mode. 1 Press the Menu button. Move the joystick up or down to select the “SETUP”, then press the joystick to enter.
BN68-00263B-3 1/12/06 11:19 AM Page 50 Changing the Size of the Image Preset: • Press the RGB button to select the PC mode. 1 Press the Menu button. Move the joystick up or down to select the SETUP, then press the joystick to enter. ! 2 Quick way to access the Size: Just press “Scaling” on the remote control. Move the joystick up or down to select the “Scaling”, then move the joystick left or right to select the “Wide” or “4:3”.
BN68-00263B-3 1/12/06 11:19 AM Page 51 Enlarge of the Image (Zoom) Preset: • Press the RGB button to select the PC mode. 1 Press the Menu button. Move the joystick up or down to select the SETUP, then press the joystick to enter. ! Quick way to access the Zoom: Just press “Zoom/Pan” on the remote control. Position Language Scaling Zoom/Panning Image Lock Miscellaneous Move 2 Move the joystick up or down to select the “Zoom/Panning”, then move the joystick left or right to enter.
BN68-00263B-3 1/12/06 11:19 AM Page 52 Move Expanded Picture Preset: • Press the RGB button to select the PC mode. 1 Press the Menu button. Move the joystick up or down to select the SETUP, then press the joystick to enter. ! Quick way to access the Zoom: Just press “Zoom/Pan” on the remote control. Position Language Scaling Zoom/Panning Image Lock Miscellaneous Move 2 Move the joystick up or down to select the “Zoom/Panning”, then move the joystick left or right to enter.
BN68-00263B-3 1/12/06 11:19 AM Page 53 Picture Quality Adjustment Picture Automatic Adjustment On/Off Preset: • Press the RGB button to select the PC mode. 1 Press the Menu button. Move the joystick up or down to select the SETUP, then press the joystick to enter. ! Quick way to access the Auto Adjust: Just press “Auto Adjust.” on the remote control.
BN68-00263B-3 1/12/06 11:19 AM Page 54 Frequency Adjustment Preset: • Press the RGB button to select the PC mode. 1 Press the Menu button. Move the joystick up or down to select the SETUP, then press the joystick to enter. Position Language Scaling Zoom/Panning Image Lock Miscellaneous Move 2 Move the joystick up or down to select the “Image Lock”, then move the joystick left or right to enter.
BN68-00263B-3 1/12/06 11:19 AM Page 55 Fine Tuning (Phase) Preset: • Press the RGB button to select the PC mode. 1 Press the Menu button. Move the joystick up or down to select the SETUP, then press the joystick to enter. Position Language Scaling Zoom/Panning Image Lock Miscellaneous Move 2 Move the joystick up or down to select the “Image Lock”, then move the joystick left or right to enter.
BN68-00263B-3 1/12/06 11:19 AM Page 56 Information Preset: • Press the RGB button to select the PC mode. 1 Press the Menu button. Move the joystick up or down to select the SETUP, then press the joystick to enter. Position Language Scaling Zoom/Panning Image Lock Miscellaneous Move 2 Move the joystick up or down to select the “Miscellaneous”, then move the joystick left or right to enter.
BN68-00263B-3 1/12/06 11:19 AM Page 57 Power Saver (PC mode only) This monitor has a built-in power management system called Power Saver. This power management system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. This power management system operates with a VESA DPMS compliant video card installed in your computer. You use a software utility installed on your computer to set up this feature. See the table below for details. Table 1.
BN68-00263B-4 1/12/06 11:20 AM Page 58
BN68-00263B-4 1/12/06 11:20 AM Page 59 P L A S M A D I S P L A Y P A N E L Function Description Selecting a Menu Language . . Setting the Multi Control . . . . . Using the Key Lock . . . . . . . . Setting up Your Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60 .61 .62 .
BN68-00263B-4 1/12/06 11:20 AM Page 60 Selecting a Menu Language 1 Press the Menu button. Move the joystick up or down to select the “SETUP”, then press the joystick to enter. SETUP Language Multi Control Key Lock Move 60 2 Move the joystick left or right to select the appropriate language: English, Spanish, or French. 3 Press the Menu button to exit.
BN68-00263B-4 1/12/06 11:20 AM Page 61 Setting the Multi Control 1 Press the Menu button. Move the joystick up or down to select the “SETUP”, then press the joystick to enter. SETUP Language Multi Control Key Lock Move 2 Move the joystick up or down to select the “Multi Control”, then move the joystick left or right to enter. English Off Adjust SETUP Language Multi Control Key Lock Move 3 Enter ID setup number. The ID Setup operates by using only the joystick or channel up/down buttons.
BN68-00263B-4 1/12/06 11:20 AM Page 62 Using the Key Lock When setting Key Lock ON, the buttons (SOURCE, MENU, VOLUME, SELECT, MUTE, POWER) on the front of the PDP don’t operate. But those buttons will operate when setting Key Lock OFF. 1 Press the Menu button. Move the joystick up or down to select the “SETUP”, then press the joystick to enter.
BN68-00263B-4 1/12/06 11:20 AM Page 63 Setting up Your Remote Control This PDP's remote control can operate almost any VCR, cable box, or DVD. After it has been set up properly, your remote control can operate in four different modes: VCR, Cable, or DVD. Pressing the corresponding button on the remote control allows you to switch between these modes, and control whichever piece of equipment you choose.
BN68-00263B-4 1/12/06 11:20 AM Remote Control Codes VCR Codes Cable Box Codes DVD Codes 64 Page 64
BN68-00263B-4 1/12/06 11:20 AM Page 65 P L A S M A D I S P L A Y P A N E L Appendix Troubleshooting............................................................................66 Care and Maintenance ................................................................67 Specifications ..............................................................................
BN68-00263B-4 1/12/06 11:20 AM Page 66 Troubleshooting Before you call a service technician, please scan this list of problems and possible solutions. It may save you time and money. Problem 66 Possible Solution Poor picture. Check all wire connections. The power indicator is amber blinking. The monitor is using its power management system. Check the power management utility on your computer. Your Remote control does not operate the monitor.
BN68-00263B-4 1/12/06 11:20 AM Page 67 Care and Maintenance With proper care, your PDP will give you many years of service. Please follow these guidelines to get the maximum performance from your PDP. Identifying Problems • • • • Do not put the PDP near extremely hot, cold, humid or dusty places. Do not put the PDP near appliances that create magnetic fields. Keep the ventilation openings clear. Do not place the PDP on a rough and slanted surface, such as cloth or paper.
BN68-00263B-4 1/12/06 11:20 AM Page 68 Specifications Exterior design and product specifications are subject to change without prior notice to improve the performance of this product. This PDP applies to Class B digital device. (Note: Class B system is for home use.) This PDP has been accepted as a device with proper electrowave and you can use this PDP not only in a residential area but other areas.
BN68-00263B-4 1/12/06 11:20 AM Page 69 Memo 69
BN68-00263B-4 1/12/06 11:20 AM Page 70 Memo 70
BN68-00263B-4 1/12/06 11:20 AM Page 71 Memo 71
BN68-00263B-cover 1/12/06 12:31 PM Page 2 BN68-00263B-01(ENG)
