BN68-00766B-00Eng_1013 10/13/04 11:13 AM Page 1 Note External speakers(PSN5042) and stand(SMN5040) are sold separately. List of Parts Accessories Remote Control/ AAA Batteries (MD59-00355A) Power Cord (3903-000085) ● Once you have unpacked your PDP with WIRELESS HOME AV CENTER, check to make sure that you have all the parts shown here. If any piece is missing or broken, call your dealer.
BN68-00766B-00Eng_1013 10/13/04 11:13 AM Page 2 Turning the PDP On and Off Press the POWER ON button on the remote control. The PDP will be turned on and you will be ready to use its features. You can also use the POWER ( ) button on the front of the PDP. You can use the POWER ON button to turn on the WIRELESS HOME AV CENTER. The WIRELESS HOME AV CENTER and the PDP each have their own respective POWER ON/OFF button, but when you turn off the PDP, the WIRELESS HOME AV CENTER will turn off also.
BN68-00766B-00Eng_1013 10/13/04 11:13 AM Page 3 Connecting the PDP to the WIRELESS HOME AV CENTER Connecting the PDP to the WIRELESS HOME AV CENTER 1 Make sure your PDP, A/V receiver and WIRELESS HOME AV CENTER are turned off and unplugged. 2 Install the WIRELESS HOME AV RECEIVER onto the bracket located at the top of the PDP’s rear panel, in the direction of the arrow (as illustrated).
BN68-00766B-00Eng_1013 10/13/04 11:13 AM Page 4 Connecting VHF and UHF Antennas Antennas with 75-ohm Round Leads If your antenna looks like this: 75-ohm round leads. 1 it has Plug the antenna lead into the AIR terminal on the WIRELESS HOME AV CENTER. Use the antenna cable included in the product package. Connecting Cable TV You can connect different cable systems to your WIRELESS HOME AV CENTER, including cable without a Cable box, and cable with a Cable box that descrambles some or all channels.
BN68-00766B-00Eng_1013 10/13/04 11:13 AM Page 5 Connecting a Camcorder WIRELESS HOME AV CENTER Camcorder Audio cable S-Video cable Video cable Connect a Video/Audio cable between the VIDEO or S-VIDEO / L - AUDIO - R jacks to the WIRELESS HOME AV CENTER and the VIDEO or S-VIDEO / AUDIO output jacks on the camcorder. (Note: For better video, use an S-VIDEO cable.) Please be sure to match the color coded input terminals and cable jacks.
BN68-00766B-00Eng_1013 10/13/04 11:13 AM Page 6 Connecting a DTV Receiver (480i, 480p) WIRELESS HOME AV CENTER DTV Receiver Component cable Audio cable 1 2 3 Connect the cable or antenna to the antenna input jack on the DTV receiver. Connect the Y, Pb, Pr (COMPONENT) input jacks on the WIRELESS HOME AV CENTER to Y, PB, PR output jacks on the DTV receiver using a component cable.
BN68-00766B-00Eng_1013 10/13/04 11:13 AM Page 7 Connecting to a second TV WIRELESS HOME AV CENTER TV Audio cable Video cable Connect the Video/Audio cables between TV out / L - AUDIO - R jacks on the WIRELESS HOME AV CENTER to VIDEO / L - AUDIO - R input jacks on the second TV. ● ● Please be sure to match the color coded input terminals and cable jacks. TV OUT works only for the AIR and Cable input sources. It does not work for the external input sources because of content protection.
BN68-00766B-00Eng_1013 10/13/04 11:13 AM Page 8 Operation Selecting the Video Signal-source Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the WIRELESS HOME AV CENTER (i.e., an antenna or a cable system). Channel TV Select Antenna √ : Air Auto Program √ Add/Delete √ Fine Tune √ Signal Strength √ Move Enter 1 Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.
BN68-00766B-00Eng_1013 10/13/04 11:13 AM Page 9 Remote Control Buttons Œ POWER ON button Turns the PDP and WIRELESS HOME AV CENTER on. You have to turn on the PDP and the WIRELESS HOME AV CENTER respectively. ´ ANTENNA button Alternates the input between Air and Cable. ˇ Number buttons Select the channel directly. ¨ +100 button Selects channels over 100. For example, to select channel 121, press “+100”, then press “2” and “1”. ˆ MUTE button Mutes the PDP sound. Ø VOL / buttons Adjusts volume.
BN68-00766B-00Eng_1013 10/13/04 11:13 AM Page 10 Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, then call your nearest Samsung authorized service center. WIRELESS HOME AV CENTER Problem Possible Solution Poor picture quality Try another channel. Adjust the antenna. Check all wire connections. Poor sound quality or no sound. Try another channel. Adjust the antenna.
BN68-00766B-00Eng_1013 10/13/04 11:13 AM Page 11 Troubleshooting PDP (Continued) Problem Possible Solution PDP set is turned on and the message “No Wireless Signal or Please Check WIRELESS HOME AV CENTER Power” appears. Cause 1: The WIRELESS HOME AV CENTER is turned off. Solution 1: Turn on the PDP set and then turn on the AV Center as they have separate power supplies. Cause 2: The message still appears despite the AV Center is on.
BN68-00766B-00Eng_1013 10/13/04 11:13 AM Page 12 Troubleshooting PDP (Continued) Problem Possible Solution The message “Not supported sound format” appears. Cause: Digital Audio rather than AC-3 (such as DTS, MPEG-1 or MPEG-2) was entered for Audio when SPDIF Input is selected in the Component Mode resulting in displaying this message with no picture. Solution: AV Center cannot handle the Audio Mode except AC-3.
