User's Manual
Table Of Contents
- English
- Before Reading This Install Guide
- Warning! Important Safety Instructions
- 01 Package Content
- 02 TV Installation
- 03 The Remote Control
- 04 Initial Setup
- 05 The Connection Panel
- 06 Connections
- 07 Setting the Hotel Option Menus
- 08 Using a Multi Code Remocon
- 09 Setting the Soundbar
- 10 Editing Channels
- 11 Anti-theft Kensington Lock
- 12 Specifications and Other Information
- Important Warranty Information Regarding Television Format Viewing
- SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT
Assigning the Channel Number to the external device
The external device source of the TV are displayed in the last page of the Channel Editor menu as shown below.
>
1. Select a external device source on the Channel Edit screen.
2. Use the directional buttons on the remote control, move the focus to Edit Channel Number, and SelectE button.
3. Use the up or down directional buttons on the remote control to assign the channel number.
4. Select OK when done, and then press the SelectE button on the remote contorl.
– Once you assign a channel number to an external device, you can enter the external device without opening the TV
source menu.