User's Manual
Table Of Contents
- English
- Before Reading This Install Guide
- Warning! Important Safety Instructions
- 01 Package Content
- 02 TV Installation
- 03 The Remote Control
- 04 Initial Setup
- 05 The Connection Panel
- 06 Connections
- 07 Setting the Hotel Option Menus
- 08 Using a Multi Code Remocon
- 09 Setting the Soundbar
- 10 Editing Channels
- 11 Anti-theft Kensington Lock
- 12 Specifications and Other Information
- Important Warranty Information Regarding Television Format Viewing
- SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT
: The RJP is a hardware module that has various audio and video inputs (A/V video, A/V
active or inactive sources.
– A group of Hotel Option menu items let you assign numbered priorities to the jacks of the RJP. 1 is the highest
priority and 2 is the lowest. When a guest connects external sources to the RJP jacks, the TV will automatically
switch between sources based on the priority you have assigned them in the Hotel Option menu. For example,
lets say AV is set to 12
into the AV jack, the TV automatically switches to the device plugged into the AV jack (the jack with the higher
priority). Note that a guest can also switch between devices manually by pushing a button on the RJP.
will restart. If the guest then touches another source button, the TV will change to the selected source and the
the TV and the RJP.
The following table shows the approximate time in seconds it takes to switch from the TV to an input source, based
on assigned or default priorities.
– When no inputs are connected.
Source To Connect
AV 2 sec
sec
– When two or more inputs are connected to the RJP and one of the input sources is disconnected and then
reconnected.
Source To Connect Total
AV sec 2 sec sec
sec sec 7.8 sec
–
– Music Mode AV in the menu on.
– HDMI Music Mode is available for the
Guestlink RJP only.
English - 28