User's Manual
Table Of Contents
- English
- Introduction
- Operational Modes
- Still image warning
- Ensuring Proper Ventilation
- Additional Information
- Accessories
- Assembling the swivel
- Installing the LED TV Stand
- Using the TV's Controller
- The Connection Panel
- The Remote Control
- Connecting to the Network
- Connecting the TV to an SBB or STB
- Connecting the RJP (Remote Jack Pack)
- Setting the Hotel Option Data
- Installing the Wall Mount
- Anti-theft Kensington Lock
- Specifications
- Display Resolution
- Dimensions
40
English
5.
a.
b.
c.
Information About SMOOVIE Remote Controls
y If you select SMOOVIE as the SI vendor, you should also use SMOOVIE remotes in your facility.
y Guests with remotes that do not have a card can only view channels from Bank 1.
y Guests using the Numeric keys on the remote to change channels can only view channels from Bank 1.
y Guests with remotes that have Green or Red cards must use the channel up/down keys to change channels.
y Guests can only see channels from the Bank1 channel list In the Channel Guide or the Channel List.
Smoovie Set Up Sequence
Step
If the TV starts with Hotel Plug&Play If Hotel Plug&Play already done
1 Enter the Hotel menu
2 After P&P, the TV displays the Hotel menu
Select the channel type
- ATV or ADTV for Air
Select the channel type
- ATV or ADTV for Air
Select Smoovie TV in the Hotel menu
Select Smoovie TV in the Hotel menu Select Channel Setup
5
Select Channel Setup
6 Set up channels in the CH Bank Editor
7 Set up channels in the CH Bank Editor After power off & on, guests can use the TV
After power off & on, guests can use the TV