User's Manual
Table Of Contents
- English
- Introduction
- Operational Modes
- Still image warning
- Ensuring Proper Ventilation
- Additional Information
- Accessories
- Assembling the swivel
- Installing the LED TV Stand
- Using the TV's Controller
- The Connection Panel
- The Remote Control
- Connecting to the Network
- Connecting the TV to an SBB or STB
- Connecting the RJP (Remote Jack Pack)
- Setting the Hotel Option Data
- Installing the Wall Mount
- Anti-theft Kensington Lock
- Specifications
- Display Resolution
- Dimensions
38
English
USB Software Upgrade Method
drive containing the upgrade to the USB port located on the TV.
recommend you clone the hospital settings so that you can easily reset them after the upgrade.
To upgrade the TV's software, follow these steps:
1. USB port on the side
of the TV.
2. Press the MENU
Support, and then press the SelectE
3. Press the ▲ or ▼Software Update, and then press the
SelectE
Scanning for USB. This may take more than 1min.
displayed.
4. The message "Upgrade version XXXX to version XXXX? The system will be
reset after upgrade." is displayed.
Press the ◄ or ► to select OK, and then press the SelectE
complete.
Soundbar(AirTrack)
y Samsung Soundbar(AirTrack) and Hospitality TVs in 2017
–
–
outputted when the TV is turned on.
TV is turned on.
–
y Sound-Bars:
–
–
y Setting the Soundbar(AirTrack) to Hotel Mode.
1. Set the following Hotel menu options:
– Hotel Option > System > Sound Bar Out = On
– Hotel Option > Power On > Power On Volume = User Defined
– Hotel Option > Power On > Power On Volume Num > Set greater than 0
– Hotel Option > Power On > > Set greater than 0
2.
(supporting ARC) on the hospitality TV.
3.
automatically detects the TV, and then automatically switches to Hotel Mode.