User's Manual
Table Of Contents
- English
- Introduction
- Operational Modes
- Still image warning
- Ensuring Proper Ventilation
- Additional Information
- Accessories
- Assembling the swivel
- Installing the LED TV Stand
- Using the TV's Controller
- The Connection Panel
- The Remote Control
- Connecting to the Network
- Connecting the TV to an SBB or STB
- Connecting the RJP (Remote Jack Pack)
- Setting the Hotel Option Data
- Installing the Wall Mount
- Anti-theft Kensington Lock
- Specifications
- Display Resolution
- Dimensions
33
English
Multi Code Remocon
A Multi Code Remocon is a special remote which is designed to control multiple TVs.
This function is useful where there is more than one TV in a location.
displayed on each TV's OSD.
The Initial ID code for each TV is “0”.
–
– You can set the ID code to any digit from 0 to 9.
– To set a TV's ID code, follow these steps:
1. Aim the remote at the TV, and then press the MUTERETURN
2.
Remote control code is set to 0. If you want to
change Remote control code, enter the digit you
want to change.
displays the following message: “Remote control code is changed to 1”
– To reset the ID code, press the MUTEEXIT
0.” appears on the TV