User's Manual
Table Of Contents
- English
- Introduction
- Operational Modes
- Still image warning
- Ensuring Proper Ventilation
- Additional Information
- Accessories
- Assembling the swivel
- Installing the LED TV Stand
- Using the TV's Controller
- The Connection Panel
- The Remote Control
- Connecting to the Network
- Connecting the TV to an SBB or STB
- Connecting the RJP (Remote Jack Pack)
- Setting the Hotel Option Data
- Installing the Wall Mount
- Anti-theft Kensington Lock
- Specifications
- Display Resolution
- Dimensions
27
English
Hotel TV Function
Description
Category Item
REACH
Solution
REACH RF Mode
You can turn on or off the REACH RF ModeOn, the TV can operate with the REACH
Server (Modulator)
REACH IP Mode
You can turn on or off the REACH IP ModeOn, the TV can operate with the REACH IP
Server through the IP network.
Server URL Setting You can enter the REACH IP Server)
REACH Channel
This is a for receiving REACH Data when the REACH RF Mode is
REACH Server (Modulator).
Group ID You can set the TV's Group ID to manage TVs in groups on the REACH Server (Modulator).
REACH Update Time
REACH Data from the REACH Server
(Modulator). (Operates when the AC power cord is plugged in and the power is off.)
y OFF: You can turn off the REACH Update Time function.
y 1hour: 1 hour after the TV's power is off
y 2hours: 2 hours after the TV's power is off
y
y
y
y
REACH Update
Immediate
On, the TV will receive and update REACH Data from the REACH Server (Modulator)
right after the power is off. (Operates when the AC power cord is plugged in and the power is off.)
Displays the version received from the REACH Server.
H.Browser
Solution
H.Browser Mode You can turn on or off the H.Browser Mode and run the .
URL Launcher Setting
H.Browser Solution settings menu
y : Enter the H.Browser Server URL where and
located.
y Uninstall: You can delete the installed .
y Timeout Setting: Set the timeout period for connecting to the URL.
y Developer Mode: If you used for development, you can connect to the Host
PC (which SDK is installed) to use the development tool.
HMS
HMS Mode
You can turn on or off the HMS ModeOn, the TV can operate with the HMS Server
through the IP network.
HMS Server URL
Setting
You can enter the HMS Server)
HMS Gateway Role
Master'.
Master' and the others to
'Slave'.
HMS HalfTicker Display
Set to On if you want to use the HalfTicker UI.
Off, the HalfTicker UI
Room Control key) on the HMS remote control will work normally without the HalfTicker UI
display.
Virtual
important features even after the screen is off.
– Electricity consumption may vary depending on the environment.
After the TV power is off (in ) if there is no input from the user within the
set again.
✎ REACH, HMS,
and H.Browser.
✎ REACH (Remote Enhanced Active Control for Hospitality) is a professional, interactive remote controller that lets
you deliver TV firmware updates, cloning data, channel mapping changes, REACH contents, and TICKER contents
in standalone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed with the
REACH server product for more operating information.