User's Manual
Table Of Contents
- English
- Introduction
- Operational Modes
- Still image warning
- Ensuring Proper Ventilation
- Additional Information
- Accessories
- Assembling the swivel
- Installing the LED TV Stand
- Using the TV's Controller
- The Connection Panel
- The Remote Control
- Connecting to the Network
- Connecting the TV to an SBB or STB
- Connecting the RJP (Remote Jack Pack)
- Setting the Hotel Option Data
- Installing the Wall Mount
- Anti-theft Kensington Lock
- Specifications
- Display Resolution
- Dimensions
20
English
y RJP (Remote Jack Pack): The RJP is a hardware module that has various Audio and Video inputs (A/V Video, A/V Audio,
PC and HDMI) and corresponding outputs. The corresponding outputs are connected from the RJP to the TV. The RJP
Inactive sources.
–
1 and HDMI to 2. If a guest has attached a device to the HDMI jack, and then plugs a device into the AV jack, the
TV automatically switches to the device plugged into the AV jack (the jack with the higher priority). Note that a
y
y The RJP will automatically turn off any LEDs after 5 minutes to avoid unnecessary light pollution in the hotel room.
y
TV and the RJP.
y
assigned or default priorities.
✎
Source To Connect
AV 2 Sec
HDMI
✎
then reconnected.
Source Disconnect To Connect Total
AV 2 Sec 6.5 Sec
HDMI
✎
priority, the RJP is in HDMI mode, and a guest removes and reconnects the AV source, the minimum time
required to switch to the AV source is 6.5 seconds.
y
y
only.