Quick Start Guide
Table Of Contents
- English
- Before Reading This Install Guide
- Warning! Important Safety Instructions
- 01 What's in the Box?
- 02 TV Installation
- 03 The Remote Control
- 04 Initial Setup
- 05 The Connection Panel
- 06 Connections
- 07 Using a TV Viewing Card (“CI or CI+ Card”)
- 08 Setting the Admin Menu
- 09 Editing Channels
- 10 Specifications and Other Information
② HDMI IN 1, 2 (ARC)
–
and video.
–
contact to the Samsung customer care centre.
③ USB (5V 1.0A)
– Connector for software upgrades and Media Play, etc.
– Service connection.
④ POWER
⑤ LAN
⑥ DIGITAL AUDIO OUT (OPTICAL)
⑦ ANT IN (SATELLITE), (AIR/CABLE)
– To view television channels correctly, the TV must receive a signal from one of the following sources:
– An outdoor antenna / A cable television system / A satellite receiver
⑧ COMPONENT IN / AV IN
VCRs.
– Connect audio cables to R-AUDIO-L on your TV and the other ends to corresponding audio out ports on AV
(Composite) devices.
– Connect component video cables (not supplied) to the component ports (PR, PB, Y) on your TV and the other
–
– R-Y, B-Y and Y or Cr, Cb and
Y.
– For AV (Composite), connect RCA audio cables (not supplied) to R-AUDIO-L on your TV set and the other ends to
corresponding audio out ports on an external device.
– When your are connecting a AV (Composite) device to AV IN [Y/Video], connect the video cable (yellow) to the
AV IN [Y/VIDEO] port (green/yellow).
English - 18