INSTALL GUIDE 5 SERIES HG32T5300E Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com Model Serial No.
Before Reading This Install Guide This TV B2B (Business to Business) model is designed for hotels or the other hospitality businesses, supports a variety of special functions, and lets you limit some user (guest) controls. Figures and illustrations in this Install Guide are provided for reference only and may differ from the actual product appearance. Product design and specifications may change without notice. Operational Modes This TV has Standalone mode.
Warning! Important Safety Instructions Please read the Safety Instructions before using your TV. Refer to the table below for an explanation of symbols which may be on your Samsung product. Class II product: This symbol indicates that a safety connection to electrical earth (ground) is not required. If this symbol is not present on a product with a main lead, the product MUST have a reliable connection to protective earth (ground). CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN.
•• Before connecting the AC power cord to the DC adaptor outlet, make sure that the voltage designation of the DC adaptor corresponds to the local electrical supply. •• Never insert anything metallic into the open parts of this apparatus. This may cause a danger of electric shock. •• To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus. •• Be sure to plug in the power cord until it is firmly seated.
Contents 01 Before Reading This Install Guide ----------------------------------------------------------------------------- 2 Warning! Important Safety Instructions ----------------------------------------------------------------------------- 3 ----------------------------------------------------------------------------- 9 What's in the Box? Installing the LED TV Stand 02 TV Installation Mounting the TV on a wall ----------------------------------------------------------------------------- 10
07 Using a TV Viewing Card (“CI or CI+ Card”) Connecting the “CI or CI+ Card” via COMMON INTERFACE 08 09 slot ----------------------------------------------------------------------------- 21 Using the “CI or CI+ Card” ----------------------------------------------------------------------------- 22 Setting the Admin Menu Admin menu items ----------------------------------------------------------------------------- 24 USB Cloning ---------------------------------------------------------------------
01 What's in the Box? Make sure the following items are included with your TV. If any items are missing, contact your dealer. Remote Control & Batteries (AAA x 2) (Not available in some locations) Power Cord Quick Setup Guide / Regulatory Guide (Not available in some locations) •• The items’ colours and shapes may vary depending on the models. •• Cables not included can be purchased separately. •• Check for any accessories hidden behind or in the packing materials when opening the box.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
Installing the LED TV Stand Assembling the Stand and Components When installing the stand, use the provided components and parts. x4 (M4 x L12) Stand Screw R R L L 1 NOTE •• Place a soft cloth over the table to protect the TV, and then place the TV so that its screen faces down toward the table surface. •• Insert the Stands into the slot on the bottom of the TV. 2 3 x2 (M4 x L12) x2 (M4 x L12) NOTE •• Make sure that at least two persons lift and move the TV.
02 TV Installation Mounting the TV on a wall If you mount this TV on a wall, follow the instructions exactly as set out by the manufacturer. Unless it is correctly mounted, the TV may slide or fall and cause serious injury to a child or adult and serious damage to the TV. •• You can mount the TV on the wall using a wall mount kit (sold separately). •• Refer to the installation manual included with the Samsung wall mount kit.
TV size in inches VESA screw hole specs (A * B) in millimetres C (mm) Standard Screw Quantity 32 100 x 100 26-28 M4 4 Do not install your wall mount kit while your TV is turned on. This may result in personal injury from electric shock. •• Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw specifications. Screws that are too long may cause damage to the inside of the TV set.
Safety Precaution: Securing the TV to the wall to prevent falling Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang on or destabilise the TV. This action may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions provided in the Safety Flyer included with your TV. For added stability and safety, you can purchase and install the anti-fall device as described below.
03 The Remote Control About the Buttons on the Remote Control •• The images, buttons, and functions of the remote control may differ depending on the model. •• The remote control has Braille points on the Power, Channel, Volume, and Select buttons and can be used by visually impaired persons. •• If you use the remote control that comes with your TV to control another TV, some functions may not operate normally. Displays and selects the available video sources. Turns the TV on and off.
Installing batteries into the remote control (Battery size: AAA) Match the polarities of the batteries to the symbols on the battery compartment. 1 2 3 •• The colour and shape of the remote may vary depending on the model. •• Use the remote control within 7 m of the TV. •• Bright lights may affect the performance of the remote control. Avoid using the remote control near special fluorescent lights or neon signs. •• Alkaline batteries are recommended for longer battery life. 1.
04 Initial Setup When you turn on your TV for the first time, it immediately starts the Initial Setup. Follow the instructions displayed on the screen and configure the TV's basic settings to suit your viewing environment. If you already completed the Initial Setup, run the Initial Setup again using the following menu. •• Admin menu > System > TV Reset If you select TV Reset, the TV resets all values to their factory defaults.
Using the TV Controller You can turn on the TV with the TV Controller button at the bottom of the TV, and then use the Control menu. The Control menu appears when the TV Controller button is pressed while the TV is On. For more information about its usage, refer to the figure below.
05 The Connection Panel BACK OF TELEVISION ① ② ⑤ ⑥ ③ ⑦ ④ ⑧ •• When connecting an external device, match the colour of the connection port to the cable. •• Whenever you connect an external device to your TV, make sure that power on the TV and the device is turned off. ① COMMON INTERFACE Watches paid channels by inserting your TV viewing card (“CI or CI+ Card”) into the COMMON INTERFACE slot.
② HDMI IN 1, 2 (ARC) Connects to the HDMI jack of a device with an HDMI output. –– No separate sound connection is needed for an HDMI to HDMI connection. HDMI connections carry both audio and video. –– It is recommended that the external device of the HDMI 1.3 or 1.4 version will be used with this TV. If you meet the compatible problem like no sound or the abnormal screen or etc with the device of the HDMI 1.2 version, contact to the Samsung customer care centre. ③ USB (5V 1.
06 Connections Connecting to your Internet network You can set up your TV so that it can access the SMART TV applications through your local area network (LAN) using a wired or wireless connection. •• After you have physically connected the TV to your network, you must configure the network connection to complete the process. You can configure the connection through the initial setup process or the Admin menu (Admin menu > Smart Service > Netwotk Setup).
Network Security Protocols The TV only supports the following wireless network security protocols: •• Authentication Modes: WEP, WPAPSK, WPA2PSK •• Encryption Types: WEP, TKIP, AES In compliance with the Wi-Fi certification specifications, Samsung TVs do not support WEP or TKIP security encryption in networks running in the 802.11n mode.
07 Using a TV Viewing Card (“CI or CI+ Card”) Watches paid channels by inserting your TV viewing card (“CI or CI+ Card”) into the COMMON INTERFACE slot. –– The 2 CI card slots may not be supported depending on the model. –– Turn the TV off to connect or disconnect a “CI or CI+ Card”. –– The “CI or CI+ Card” may not supported depending on the model. Connecting the “CI or CI+ Card” via COMMON INTERFACE slot Connect the “CI or CI+ Card” to the COMMON INTERFACE slot as shown in the image below.
Using the “CI or CI+ Card” To watch paid channels, the “CI or CI+ CARD” must be inserted. •• Samsung TV follow up CI+ 1.4 standard. When Samsung TV product display the pop-up message, it may happen due to CI+ 1.4 Version inconsistency. If you have a problem, please contact Samsung Call Centre. –– Your Samsung TV conforms to the CI+ 1.4 standards. –– Where a CI+ Common Interface module is incompatible with Samsung TV then please remove the module and contact the CI+ operator for assistance.
08 Setting the Admin Menu To access the Admin menu, press the following buttons on the remote control: 1. Press the MUTE button. 2. Press the 1 button. 3. Press the 1 button. 4. Press the 9 button. 5. Press the SelectE button. To control the TV functions in the Admin menu, the TV has two modes, the Standalone mode and the Interactive mode. The menu items that differ between the modes are listed below.
Admin menu items To exit from this menu, turn off (or turn off and unplug the power cable if you have changed SI vendor) the TV, and then turn on again. Any changes you made are saved. •• The menu items may not be supported depending on the model or geographical area. Admin menu Item Description SI Vendor OFF / Movielink / Swisscom Power On Channel Set the channel to display when the TV is turned on. •• User Defined: Lets you set the channel number manually on Power On Channel Num.
Admin menu Item Mixed Channel Map Dynamic SI Channel Description Enables showing/browsing all antenna type (Air/Cable) channels at the same time. •• ON: When set to on, guests can access the complete channel map irrespective of the selected antenna type. The Channel List/Channel Editor will also populate Air as well Cable type channels. •• OFF: When set to off, guest can access the channel map corresponding to the selected antenna type (Air/Cable) only.
Admin menu Item Menu OSD Description Picture Menu Lock •• ON: The Picture menu is disable for guest. •• OFF: The Picture menu is enable for guest. Menu Display •• ON: The main menu is displayed. •• OFF: The main menu is not displayed. Channel Menu Display •• OFF: Broadcasting menu is disable for guest. •• ON: Broadcasting menu is enable for guest. Panel Button Lock Turning the TV Controller button operations on or off. •• Unlock: Unlocks TV Controller button. •• Lock: Locks TV Controller button.
Admin menu Item Smart Service Description Network Setup Run the Network menu to configure your TV's network settings. You can set the following items: •• Network Status: View the current network and Internet status. •• Open Network Settings: Connect to an available network. •• Reset Network: Restore the network settings to the factory default. •• Expert Settings: Configure advanced network settings. Download by App ID Enter the App ID. Only a registered ID can be entered.
Admin menu Item Security DRM System Description Factory Lock Disable entry to Admin menu. •• ON: The password is needed before entering Admin menu. •• OFF: Disable this function. Password Popup Enable or disable password input popup window. If this option is set to off, the TV will not display the password input popup window when entering the Admin menu. If set to ON, the password input popup window appears.
Admin menu Item System *LYNK Cloud **Virtual Standby Description System Manager Gives you direct, immediate access to System Manager functions such as Time, Language, Change PIN. System Manager allow you to adjust your TV's system and customise settings for your viewing environment. OTN Update Lets you upgrade the TV Software over the network when a valid upgrade file is present on server. •• OTN Update changed to ON and disabled when Enrollment Status in LYNK Cloud is Yes.
USB Cloning Admin menu > Cloning The USB cloning function lets you download user-configured settings (Picture, Sound, Broadcasting, Admin menu and so on) from one TV to a USB device, and then upload these settings from the USB device to other TV sets. This lets you create a standard file of settings and distribute that standard file to all the TVs in your facility. •• After cloning, certain features are applied when the TV is turned on again.
Settings Cloned in the Admin menu •• The menu items may not be supported depending on the models.
Menu Item Smart Service Security DRM System LYNK Cloud Virtual Standby Room Number Sub Item Cloned or not Network Setup ― No Download by App ID ― Yes Terms & Policy ― Yes Smart Features Autorun Smart Hub: ON / OFF Yes Home App Preview Editor ― Yes Quick Settings Editor ― Yes Samsung Account ― No FactoryLock ON / OFF Yes Password Popup ON / OFF Yes Password Input ― No Password Setting ― Yes Password Reset ― No Security Mode ON / OFF Yes USB Enable / Disable Y
Setting Auto Initialize OO Admin menu > Cloning > Setting Auto Initialize When you clone settings from one TV to another, you clone both the guest side menu and hotel side menu settings: Picture, Sound, Broadcasting, Admin menu and so on. This lets you set nearly all of the menu values on your hospitality TVs to the same, standard settings. If you allow guests access to the guest side menus, for example the Picture menu, they can change the settings in those menus so they are no longer standard.
Menu Item R-Gain G-Gain 2 Point B-Gain R-Offset G-Offset White Balance B-Offset 20 Point Interval 20 Point Settings Red Green Picture Expert Settings Blue Gamma HLG ST.2084 BT.
Menu Item Clock Mode System Manager Time Clock Time Zone DST Language Anynet+ (HDMI-CEC) Game Mode Game Mode Dynamic Black Equalizer External Device Manager Game Mode Settings Game Motion Plus Game Motion Plus Settings Blur Reduction Judder Reduction LED Clear Motion General Input Signal Plus HDMI Black Level Input Device Manager Motion Lighting Eco Solution Auto Power Off Ambient Light Detection Minimum Brightness High Contrast Accessibility Greyscale Colour Inversion Enlarge English - 35 Ke
Updating the TV’s Software DO NOT turn off the TV’s power until the update is complete. The TV will turn off and on automatically after completing the software update. Video and audio settings will be reset to their defaults after a software update. To easily reset the settings after software update, we recommend you to copy the TV's settings. •• For more information about the USB cloning function, refer to page 30. Updating through a USB device To update the TV's software, follow these steps: 1.
09 Editing Channels Using Channel Editor OO Admin menu > Channel > Channel Editor Using Channel Editor you can edit the channels stored in the TV's memory. •• Change the channel numbers and names, edit the channel language and channel genre and delete channels. •• If you set the Screen Off function to On for the selected channels, a screen off message is displayed, and pictures are turned off by the Screen Off function and only audio is output from those channels.
Editing the Channel Number Change the channel number of a channel you select. To change a channel number, follow these steps: 1. Select a channel on the Channel Edit screen. 2. Use the directional buttons on the remote control, move the focus to Edit Channel Number, and press the Select button. 3. Use the up or down directional buttons on the remote control to change the channel number. 4. Move the focus to OK when done, and then press the Select button on the remote contorl.
Assigning the Channel Number to the external device The external device source of the TV are displayed in the last page of the Channel Editor menu as shown below. > 1. Select a external device source on the Channel Edit screen. 2. Use the directional buttons on the remote control, move the focus to Edit Channel Number, and press the Select button. 3. Use the up or down directional buttons on the remote control to assign the channel number. 4.
10 Specifications and Other Information Specifications Model Name HG32T5300E Display Resolution 1920 x 1080 Screen Size Measured Diagonally 32 inches 80 cm Sound (Output) 10 W Dimensions (W x H x D) Body With stand 737.4 x 438.0 x 74.1 mm 737.4 x 465.4 x 150.5 mm Weight Without Stand With Stand 4.0 kg 4.
Supported Resolutions for Connecting a Computer When you use your TV as a computer monitor, you can also select one of the standard resolutions listed in the Resolution column. The TV will automatically adjust to the resolution you choose. Mode IBM MAC VESA DMT VESA CVT CTA-861 Resolution Display format Horizontal frequency (KHz) Vertical frequency (Hz) Clock frequency (MHz) Polarity (horizontal / vertical) 720 x 400 70 Hz 31.469 70.087 28.322 -/+ 640 x 480 67 Hz 35.000 66.667 30.
Supported Resolutions for Video Signals Check the resolutions supported for video signals. Mode CTA-861 VESA CVT Resolution Display format Horizontal frequency (KHz) Vertical frequency (Hz) Clock frequency (MHz) Polarity (horizontal / vertical) 720 (1440) x 576i 50 Hz 15.625 50.000 27.000 -/- 720 (1440) x 480i 60 Hz 15.734 59.940 27.000 -/- 720 x 576 50 Hz 31.250 50.000 27.000 -/- 720 x 480 60 Hz 31.469 59.940 27.000 -/- 1280 x 720 50 Hz 37.500 50.000 74.
Dimensions Front view / Side view The displayed image may differ from your TV, depending on the model. (Unit: mm) 74.1 737.4 700.4 803.3 394.9 465.4 150.
Base Stand detail The displayed image may differ from your TV, depending on the model. (Unit: mm) 150.5 49.5 150.2 •• NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors.
Licences Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. THIS PRODUCT IS SOLD WITH A LIMITED LICENCE AND IS AUTHORISED TO BE USED ONLY IN CONNECTION WITH HEVC CONTENT THAT MEETS EACH OF THE THREE FOLLOWING QUALIFICATIONS: (1) HEVC CONTENT ONLY FOR PERSONAL USE; (2) HEVC CONTENT THAT IS NOT OFFERED FOR SALE; AND (3) HEVC CONTENT THAT IS CREATED BY THE OWNER OF THE PRODUCT.
