Quick Start Guide
Table Of Contents
- English
- Before Reading This Install Guide
 - Warning! Important Safety Instructions
 - 01 What's in the Box?
 - 02 TV Installation
 - 03 The Remote Control
 - 04 Initial Setup
 - 05 The Connection Panel
 - 06 Connections
 - 07 Using a TV Viewing Card (“CI or CI+ Card”)
 - 08 Setting the Hotel Option Menus
 - 09 Using a Multi Code Remocon
 - 10 Setting the Soundbar
 - 11 Editing Channels
 - 12 Anti-theft Kensington Lock
 - 13 Specifications and Other Information
 
 
  RJP (Remote Jack Pack): The RJP is a hardware module that has various audio and video inputs (A/V video, A/V 
The RJP communicates with the TV via RS232. The RJP communicates with the TV by sending messages regarding 
active or inactive sources.
 – A group of Hotel Option menu items let you assign numbered priorities to the jacks of the RJP. 1 is the highest 
priority and 2 is the lowest. When a guest connects external sources to the RJP jacks, the TV will automatically 
switch between sources based on the priority you have assigned them in the Hotel Option menu. For example, 
lets say AV is set to 12
into the AV jack, the TV automatically switches to the device plugged into the AV jack (the jack with the higher 
priority). Note that a guest can also switch between devices manually by pushing a button on the RJP.
  
  
will restart. If the guest then touches another source button, the TV will change to the selected source and the 
  After the RJP reset or the TV turns off/on, it takes approximately 10 seconds to establish communications between 
the TV and the RJP.
  The following table shows the approximate time in seconds it takes to switch from the TV to an input source, based 
on assigned or default priorities.
 – When no inputs are connected.
Source To Connect
AV 2 sec
 3.9 sec
 – When two or more inputs are connected to the RJP and one of the input sources is disconnected and then 
reconnected.
Source  To Connect Total
AV  sec 2 sec  sec
 3.9 sec 3.9 sec 7.8 sec
 – 
 – To play audio devices (Ipods, MP3 devices, etc.) through the RJP, you must turn Music Mode AV in the menu on.
 – HDMI Music Mode is available for the 
Guestlink RJP only.
English - 28










