User Manual ME32B ME40B ME46B ME55B The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
Table Of Contents BEFORE USING THE PRODUCT PREPARATIONS 11 Copyright 12 Cleaning 12 Storage 13 Safety Precautions 13 14 15 17 Symbols Electricity and Safety Installation Operation 22 Checking the Contents 22 23 Removing the Packaging Checking the Components 25 Parts 25 27 28 29 32 Control Panel Reverse Side Anti-theft Lock Remote Control Connection Using an IR Stereo Cable 33 Before Installing the Product (Installation Guide) 33 34 Tilting Angle and Rotation Ventilation 35 Dimensio
Table Of Contents CONNECTING AND USING A SOURCE DEVICE USING MDC 54 Before Connecting 54 Pre-connection Checkpoints 55 Connecting and Using a PC 55 58 Connecting to a PC Changing the Resolution 60 Connecting an External Monitor 61 Connecting to a Video Device 61 61 62 62 64 64 Connection Using the AV Cable Connection Using the Component Cable Connection Using an HDMI-DVI Cable Connection Using an HDMI Cable Connecting to an Audio System Connecting to an Antenna 65 Connecting the network bo
Table Of Contents SCREEN ADJUSTMENT 72 What is MDC? 72 74 75 76 77 78 80 81 83 86 87 96 98 103 Connecting to MDC Connection Management Auto Set ID Cloning Command Retry Getting Started with MDC Main Screen Layout Menus Screen Adjustment Sound Adjustment System Setup Tool Settings Other Functions Troubleshooting Guide 105 Picture Mode 105 105 If the input source is PC, DVI or DisplayPort If the input source is AV, Component, HDMI or TV 106 Backlight / Contrast / Brightness / Sharpness / Color / Ti
Table Of Contents SOUND ADJUSTMENT MEDIA 111 Advanced Settings 111 111 111 112 112 112 112 112 113 113 113 113 113 Black Tone Dynamic Contrast Shadow Detail Gamma Expert Pattern RGB Only Mode Color Space White Balance 10p White Balance (Off / On) Flesh Tone Edge Enhancement (Off / On) Motion Lighting (Off / On) LED Motion Plus (Off / On) 114 Picture Options 114 114 115 115 115 115 115 Color Tone Color Temp.
Table Of Contents NETWORK 123 Channel 123 126 126 127 127 Channel Manager Antenna Auto Program Clear Scrambled Channel Fine Tune 128 MagicInfo Lite 128 Videos 128 Playing a Video 132 Photos 132 Viewing a Photo (or Slide Show) 133 Music 133 Playing Music 135 Videos / Photos / Music - Additional Functions 135 136 Sorting the file lists Videos / Photos / Music Play Option menu 138 Source 138 139 139 139 139 Source Edit Name Edit Favorites Information Refresh 140 Network Setting 14
Table Of Contents SYSTEM 151 MagicInfo Lite Settings 152 Plug & Play 153 Multi Control 153 Configuring settings for Multi Control 154 Time 154 155 155 156 156 Clock Sleep Timer On Timer Off Timer Holiday Management 157 Menu Language 157 Eco Solution 157 158 158 158 Energy Saving Eco Sensor (Off / On) No Signal Power Off Auto Power Off (Off / On) 159 Caption 159 159 160 Caption Caption Mode Digital Caption Options 161 Security 161 161 162 164 Safety Lock (Off / On) Button Lock (Off
Table Of Contents SUPPORT 168 Video Wall 168 169 169 169 170 Video Wall Format Horizontal Vertical Screen Position 171 Source AutoSwitch Settings 172 General 172 172 173 173 173 173 173 174 174 174 Max.
Table Of Contents MAGICINFO LITE TROUBLESHOOTING GUIDE 182 File Formats Compatible with MagicInfo Lite Player 182 Video / Audio 186 Network Schedule 186 187 187 190 Connecting to a server MagicInfo Lite Settings Approving a connected device from the server Setting the current time 191 Local Schedule 191 Local Schedule Manager 191 194 195 197 198 199 Registering a Local Schedule Modifying a Local Schedule Deleting a Local Schedule Running a Local Schedule Stopping a Local Schedule Viewing the
Table Of Contents SPECIFICATIONS APPENDIX 209 Q&A 211 General 213 PowerSaver 214 Preset Timing Modes 216 License 217 Contact SAMSUNG WORLDWIDE 218 Responsibility for the Pay Service (Cost to Customers) 218 218 218 Not a product defect A Product damage caused by customer's fault Others 219 Optimum Picture Quality and Afterimage Burn-in Prevention 219 220 Optimum Picture Quality Prevention of Afterimage Burn-in 222 Terminology INDEX Table Of Contents 10
Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality. © 2012 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. The SAMSUNG and SyncMaster logos are registered trademarks of Samsung Electronics. Microsoft and Windows are registered trademarks of Microsoft Corporation.
Before Using the Product Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning. The following images are for reference only. Real-life situations may differ from what is shown in the images. 1. Power off the product and computer. 2. Disconnect the power cord from the product. Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock may result. 3.
Before Using the Product Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.
Before Using the Product Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damaged power cord or plug, or a loose power socket. z An electric shock or fire may result. Do not use multiple products with a single power socket. z Overheated power sockets may cause a fire. Do not touch the power plug with wet hands. Otherwise, an electric shock may result.
Before Using the Product Caution Do not disconnect the power cord while the product is being used. z The product may become damaged by an electric shock. Only use the power cord provided with your product by Samsung. Do not use the power cord with other products. z ! A fire or electric shock may result. Keep the power socket where the power cord is connected unobstructed. z The power cord must be disconnected to cut off power to the product when an issue occurs.
Before Using the Product Keep the plastic packaging out of the reach of children. z Children may suffocate. ! Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.) z The product may fall and become damaged and/or cause an injury. z Using the product in an area with excess vibration may damage the product or cause a fire. Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke.
Before Using the Product Caution Do not drop the product while moving. z Product failure or personal injury may result. ! Do not set down the product on its front. z The screen may become damaged. When installing the product on a cabinet or shelf, make sure that the bottom edge of the front of the product is not protruding. z The product may fall and become damaged and/or cause an injury. z Install the product only on cabinets or shelves of the right size.
Before Using the Product If the product generates abnormal sounds, a burning smell or smoke, disconnect the power cord immediately and contact Samsung Customer Service Center. z ! An electric shock or fire may result. Do not let children hang from the product or climb on top of it. z Children may become injured or seriously harmed. If the product is dropped or the outer case is damaged, turn off the power switch and disconnect the power cord. Then contact Samsung Customer Service Center.
Before Using the Product Ensure the vents are not blocked by tablecloths or curtains. z 100 An increased internal temperature may cause a fire. Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects that burn easily (paper, matches, etc) into the product (via the vent or input/output ports, etc). z Be sure to power off the product and disconnect the power cord when water or other foreign substances have entered the product. Then contact Samsung Customer Service Center.
Before Using the Product Looking at the screen too close for an extended period of time can deteriorate your eyesight. ! Do not use humidifiers or stoves around the product. z A fire or electric shock may result. Rest your eyes for more than 5 minutes for every 1 hour of product use. z Eye fatigue will be relieved. ! Do not touch the screen when the product has been turned on for an extended period of time as it will become hot. Store small accessories out of the reach of children.
Before Using the Product When replacing the battery, insert it with the right polarity (+, -). z Otherwise, the battery may become damaged or it may cause fire, personal injury or damage due to leakage of the internal liquid. ! The batteries (and rechargeable batteries) are not ordinary refuse and must be returned for recycling purposes. The customer is responsible for returning the used or rechargeable batteries for recycling.
1 1.1 Preparations Checking the Contents 1.1.1 Removing the Packaging 1 Remove the black locking device at the bottom of the box. 1 2 2 Using the grooves in the box, lift and remove the top of the box. 3 Check the components and remove the styrofoam and plastic bag. 3 The appearance of actual components may differ from the image shown. This image is for reference only. 4 Store the box in a dry area so that it can be used when moving the product in the future.
1.1.2 Checking the Components z Contact the vendor where you purchased the product if any components are missing. z The appearance of the components and items sold separately may differ from the image shown. z A stand is not provided with the product. To install a stand, you can purchase one separately. Components Components may differ in different locations.
1 Preparations Items sold separately z The stand is not supplied. z The following items can be purchased at your nearest retailer.
1 1.2 Preparations Parts 1.2.1 Control Panel z The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. z Keep the area between the remote sensor and remote control obstacle-free. SOURCE MENU + - POWER Sensor Description Selects the input source that an external device is connected to. SOURCE MENU + - Opens the on-screen menu and exits from the menu. Also use to exit the OSD menu or return to the previous menu.
1 Preparations Sensor Description Use this button for turning the Display on and off. Receives signals from the remote Remote sensor To control the remote control in front of the product, lower the remote control sensor in the direction of the arrow (indicated in the zoomed-in image on the previous page). Keep the area between the remote sensor and remote control obstacle-free.
1 Preparations 1.2.2 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
1 Preparations Assembling the Holder-Wire stand z Stand: Sold separately 1.2.3 Anti-theft Lock z An anti-theft lock allows you to use the product securely even in public places. z The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. To lock an anti-theft locking device 1 Fix the cable of your anti-theft locking device to a heavy object such as a desk.
1 Preparations 1.2.4 Remote Control z Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled. z Remote control button functions may differ for different products. Power on the product. Power off the product. Select a connected source device. Enter the password in the OSD menu, or change the channel. Press to select additional channels (digital) being broadcasted by the same station.
1 Preparations Adjusting the OSD with the Remote Control 1. Open the OSD menu. 2. Select from Picture, Sound, Media, Network, System or Support in the displayed OSD menu screen. 3. Change settings as desired. 4. Finish setting. 5. Close the onscreen display (OSD) menu.
Remote Control Reception Range 7m ~ 10m 1 Preparations Use the remote control within 7m to 10m from the sensor on the product at an angle of 30˚ from the left and right. z Store used batteries out of reach of children and recycle. z Do not use a new and used battery together. Replace both batteries at the same time. z Remove batteries when the remote control is not to be used for an extended period of time.
1 Preparations 1.2.5 Connection Using an IR Stereo Cable Controlling more than one display product using your remote control 1 z 2 IR/ AMBIENT SENSOR IN IR/ AMBIENT SENSOR IN IR OUT IR OUT Connect the [IR OUT] port on the product to the [IR / AMBIENT SENSOR IN] port on the other display product using the dedicated stereo cable. z A command sent from the remote control pointed at product 1 will be received by both display products 1 and 2 .
1 1.3 Preparations Before Installing the Product (Installation Guide) To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. z Ensure that an authorized installation company installs the wall mount. z Otherwise, it may fall and cause personal injury. z Make sure to install the specified wall mount. 1.3.1 Tilting Angle and Rotation Contact Samsung Customer Service Center for further details.
1 Preparations 1.3.2 Ventilation 1. Installation on a Perpendicular Wall A Minimum 40 mm B Ambient temperature: Under 35 C z When installing the product on a perpendicular wall, allow at least 40 mm of space between the product and wall surface for ventilation and ensure that the ambient A temperature is kept below 35 C. B Figure 1.1 Side view 2. Installation on an Indented Wall Contact Samsung Customer Service Center for further details. B D D Figure 1.
1 1.4 Preparations Dimensions 5 1 2 4 3 Unit: mm (inches) Model name 1 2 3 4 5 ME32B 733.7 (28.9) 698.4 (27.5) 392.8 (15.5) 430.2 (16.9) 29.9 (1.2) ME40B 921.2 (36.3) 885.6 (34.9) 498.2 (19.6) 536.1 (21.1) 29.9 (1.2) ME46B 1056.3 (41.6) 1018.0 (40.1) 572.6 (22.5) 612.3 (24.1) 29.9 (1.2) ME55B 1246.4 (49.1) 1209.6 (47.6) 680.4 (26.8) 718.2 (28.3) 29.9 (1.2) All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice.
1 1.5 Preparations Installing the Wall Mount 1.5.1 Preparing before installing Wall-Mount To install a wall-mount from another manufacturer, use the Holder-Ring. 1 1.5.2 Installing the Wall Mount Kit The wall mount kit (sold separately) allows you to mount the product on the wall. For detailed information on installing the wall mount, see the instructions provided with the wall mount. We recommend you contact a technician for assistance when installing the wall mount bracket.
1 Preparations z Standard dimensions for wall mount kits are shown in the table below. z Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided. z Do not use screws that do not comply with the VESA standard screw specifications. z Do not use screws that are longer than the standard length or do not comply with the VESA standard screw specifications. Screws that are too long may cause damage to the inside of the product.
1 1.6 Preparations Remote Control 1.6.1 Cable Connection RS232C Cable z Interface RS232C (9 pins) Pin TxD (No. 2), RxD (No. 3), GND (No.
1 Preparations z RS232C cable Connector: 9-Pin D-Sub to Stereo Cable 9 6 3 2 1 5 -P1- -P2(STEREO PLUG) (3.5ø) 1 -P1- Female -P1- -P2- -P2- Rx 2 --------> 3 Tx Tx 3 <-------- 2 Rx Gnd 5 --------- 5 Gnd STEREO PLUG (3.5ø) LAN Cable z Pin assignment 1 2 3 4 5 6 7 8 Pin No.
1 Preparations z Connector: RJ45 Direct LAN cable (PC to HUB) HUB P2 RJ45 MDC P1 P1 P2 Signal P1 TX+ 1 TX- RJ45 MDC P2 Signal <--------> 1 TX+ 2 <--------> 2 TX- RX+ 3 <--------> 3 RX+ RX- 6 <--------> 6 RX- Cross LAN cable (PC to PC) RJ45 MDC P1 P2 Signal P1 P2 Signal TX+ 1 <--------> 3 RX+ TX- 2 <--------> 6 RX- RX+ 3 <--------> 1 TX+ RX- 6 <--------> 2 TX- 1 Preparations 40
1 Preparations 1.6.
1 Preparations z Connection 3 RJ45 RS232C OUT RS232C IN RS232C OUT IN RS232C OUT IN OUT 1 Preparations 42
1 Preparations 1.6.3 Control Codes Viewing control state (Get control command) Header Command 0xAA Command type Data length ID Checksum 0 Controlling (Set control command) Header Command 0xAA Command type Data length Data 1 Value ID Checksum Command No.
1 Preparations z To control all devices connected by a serial cable simultaneously irrespective of IDs, set the ID as "0xFE" and transmit commands. Commands will be executed by each device but ACK will not respond. Power control z Function A TV/monitor can be powered on and off using a PC.
1 Preparations Volume control z Function The volume of a TV/monitor can be adjusted using a PC.
1 Preparations Input source control z Function The input source of a TV/monitor can be changed using a PC.
1 Preparations z Ack Header Command 0xAA 0xFF Data length Ack/Nak r-CMD Val1 3 ‘A’ 0x14 "Input Source" ID Checksum "Input Source": An input source code to be set on a TV/monitor z Nak Header Command Data length Ack/Nak r-CMD Val1 3 ‘N’ 0x14 "ERR" ID 0xAA 0xFF Checksum "ERR": A code showing what error has occurred 1 Preparations 47
1 Preparations Screen z Function The screen mode of a TV/monitor can be changed using a PC. Screen mode cannot be controlled when the Video Wall function is enabled. This control can only be used on models that include a TV.
1 Preparations Screen size control z Function The screen size of a TV/monitor can be changed using a PC.
1 Preparations PIP On/Off control z Function The PIP mode of a TV/monitor can be turned on or off using a PC. z Only available on models that have the PIP function. The mode cannot be controlled if Video Wall is set to On. This function is not available in MagicInfo.
1 Preparations Auto adjustment control (PC and BNC only) z Function Automatically adjust the PC system screen using a PC.
1 Preparations Video Wall Mode Control z Function Video Wall mode can be activated on a TV/monitor using a PC. This control is only available on a TV/monitor whose Video Wall is enabled. This function is not available in MagicInfo.
1 Preparations Safety Lock z Function PC can be used to turn the Safety Lock function on or off on a TV/monitor. This control is available regardless of whether or not the power is turned on.
2 2.1 Connecting and Using a Source Device Before Connecting Check the following before you connect this product with other devices. Devices that can be connected to this product include PCs, camcorders, speakers, set top boxes and DVD/Blu-ray Disc players. 2.1.1 Pre-connection Checkpoints z Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device.
2 2.2 Connecting and Using a Source Device Connecting and Using a PC 2.2.1 Connecting to a PC z Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. z A PC can be connected to the product in a variety of ways. Select a connection method suitable for your PC. Connecting parts may differ in different products.
2 Connecting and Using a Source Device Connection Using an HDMI-DVI Cable HDMI IN RGB / DVI / HDMI AUDIO IN When you connect a PC to the product using an HDMI-DVI cable, set Edit Name to DVI PC to access video and audio content stored on the PC.
2 Connecting and Using a Source Device Connection Using an DP Cable DP IN 2 Connecting and Using a Source Device 57
2 Connecting and Using a Source Device 2.2.2 Changing the Resolution Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. Changing the Resolution on Windows XP Go to Control Panel 1 Display Settings, and change the resolution.
2 Connecting and Using a Source Device Changing the Resolution on Windows 7 Go to Control Panel Display Screen Resolution, and change the resolution.
2 2.3 Connecting and Using a Source Device Connecting an External Monitor DVI OUT (LOOPOUT) AUDIO OUT z The Loopout function can be used to duplicate the screen of the primary display. Connect [DVI OUT] on the primary display to [DVI IN] or [HDMI IN] on another display. z Up to Full HD resolution can be supported. Compatible input sources include DVI IN, DP IN and HDMI IN. Multiple monitors that are daisy-chained have a limit to the connectable monitors.
2 2.4 Connecting and Using a Source Device Connecting to a Video Device z Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. z You can connect a video device to the product using a cable. Connecting parts may differ in different products. After connecting a source device, press the SOURCE button on the remote control and select the connected source device. 2.4.1 Connection Using the AV Cable AV IN 2.4.
2 Connecting and Using a Source Device 2.4.3 Connection Using an HDMI-DVI Cable HDMI IN RGB / DVI HDMI AUDIO IN z Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable. To resolve this, additionally connect an audio cable to the audio ports on the product and video device. When you connect a video device to the product using an HDMI-DVI cable, set Edit Name to DVI Device to access video and audio content stored on the video device.
2 Connecting and Using a Source Device Using an HDMI cable or HDMI to DVI Cable (up to 1080p) z For better picture and audio quality, connect to a digital device using an HDMI cable. z An HDMI cable supports digital video and audio signals, and does not require an audio cable. To connect the TV to a digital device that does not support HDMI output, use an HDMI/DVI and audio cables.
2 Connecting and Using a Source Device 2.4.5 Connecting to an Audio System AUDIO OUT 2.4.6 Connecting to an Antenna VHF/UHF Antenna ANT IN The initial settings process runs automatically when the product is turned on for the first time after purchase. Take extra care to ensure the wires inside the cable do not bend.
2 2.5 Connecting and Using a Source Device Connecting the network box (Sold separately) Connect the DP-HDMI cable to the [HDMI IN] port on the product and the [MAGICINFO OUT] port on the network box. For details on how to connect to a network box, refer to the user's manual provided with the network box upon purchase. 2.5.1 MagicInfo To use MagicInfo, a network box (sold separately) must be connected to the product. z To change the MagicInfo settings, run "MagicinfoSetupWizard" on the desktop.
2 Connecting and Using a Source Device 3 Select the default application you want to run when MagicInfo starts. MagicInfo Setup Wizard - v.1.12 Select Application - step 1 MagicInfo Pro (LAN, WAN based version) MagicInfo-i Premium (Web-based version) Select Later < Back(B) 4 Next(N) > Finish Cancel Enter the IP information. MagicInfo Setup Wizard - v.1.12 Select TCP/IP - step 2 Obtain an IP address automatically Use the following IP address: IP address: 192 . 168 . 0 .
2 Connecting and Using a Source Device 5 Select a language. (The default language is English.) MagicInfo Setup Wizard - v.1.12 Select Language -step 3 Select the language you want to install on the system for menus and dialogs. Current Language : Engilsh Chinese [Traditional] German English French Italian Japanese Korean Russian Swedish Turkish Chinese [Simplified] Portuguese < Back(B) 6 Next(N) > Finish Cancel Select a display mode. MagicInfo Setup Wizard - v.1.
2 Connecting and Using a Source Device 7 Double-check the settings you have just configured. MagicInfo Setup Wizard - v.1.12 Setup Information 1. Application : MagicInfo Pro [LAN,WAN based version\ 2. Internet Protocol [TCP/IP] IP : 192.168.0.102 3. Language : 4. Screen Type : English Landscape Do not show again < Back(B) Apply Finish Cancel z If the execution icon does not appear, double-click the MagicInfo icon on the desktop. The icon will appear at the bottom right of the screen.
2 2.6 Connecting and Using a Source Device Changing the Input source 2.6.1 Source MENU [m] Media Source ENTER [ ] Source allows you to select a variety of sources and change source device names. Source You can display the screen of a source device connected to the product. Select a source from Source List to display the screen of the selected source. Refer to page 138 for details about the Source menu.
3 Using MDC MDC (Multiple Display Control) is an application that allows you to easily control multiple display devices simultaneously using a PC. 3.1 Configuring Settings for Multi Control MENU [m] System Multi Control ENTER [ ] Assign an individual ID to your product. 3.1.1 Configuring settings for Multi Control z MDC Connection Select a method to connect to MDC to receive the MDC signal. RS232C MDC Communicate with MDC via the RS232C-stereo cable.
3 3.2 Using MDC MDC Program Installation/Uninstallation 3.2.1 Installation 1 2 Insert the installation CD into the CD-ROM drive. Click the MDC Unified installation program. If a software installation window is not displayed on the main screen, install with the MDC Unified execution file in the MDC folder on the CD. 3 4 Click "Next" in the displayed Installation Wizard screen. In the "License Agreement" window displayed, select "I accept the terms in the license agreement" and click "Next".
3 3.3 Using MDC What is MDC? Multiple display control "MDC" is an application that allows you to easily control multiple display devices simultaneously using a PC. 3.3.1 Connecting to MDC Using MDC via RS-232C (serial data communications standards) An RS-232C serial cable must be connected to the serial ports on the PC and monitor.
3 Using MDC Using MDC via Ethernet Enter the IP for the primary display device and connect the device to the PC. One display device can connect to another using an RS-232C serial cable. Connection using a direct LAN cable RJ45 Multiple products can be connected using the [RJ45] port on the product and the LAN ports on the HUB. Connection using a cross LAN cable RS232C OUT RJ45 Multiple products can be connected using the [RS232C IN / OUT] port on the product.
3 Using MDC 3.3.2 Connection Management Connection management includes the Connection list and Connection list modification options. Connection list - Connection list shows the details of the connections such as connection setting (IP/ COM, Port No, MAC, and Connection Type), connection status, Set ID Range, and detected devices. Each connection can contain a maximum of 100 devices connected in serial daisy-chain fashion.
3 Using MDC 3.3.3 Auto Set ID Auto Set ID feature assigns a Set ID for all the LFDs connected in daisy-chain of a selected connection. There can be a maximum of 100 LFDs in a connection. The Set ID is assigned sequentially in the daisychain running from 1 to 99, and then finally to Set ID 0.
3 Using MDC 3.3.4 Cloning Using the Cloning feature, you can copy the setting of one LFD and apply it to multiple selected LFDs. You can select specific tab categories or all tab categories for cloning, using the copy setting option window.
3 Using MDC 3.3.5 Command Retry This feature is used to specify the maximum number of times the MDC command will be retried in case of there being no reply or a corrupted reply from an LFD. The retry count value can be set using the MDC options window. The retry count value must be between 1-10. The default value is 1.
3 Using MDC 3.3.6 Getting Started with MDC 1 To start the program, click Start 2 Click Add to add a display device. z Programs Samsung MDC Unified. If the connection is established via RS232C, go to Serial and specify the COM Port.
3 Using MDC z If the connection is established via Ethernet, enter the IP that was entered for the display device.
3 Using MDC 3.3.7 Main Screen Layout 1 6 5 4 2 3 1 Menu Bar Change the status of a display device or the properties of the program. 2 Device Category View a list of connected display devices or device groups. 3 Schedule Category View a list of schedules for display devices. 4 Set List Select the display device you want to adjust. 5 Modify the Set List Add, edit, regroup or delete sets. 6 Help Topics Display help topics for the program.
3 Using MDC 3.3.8 Menus You can power on or off a selected device or change the input source or volume of the device. Choose display devices from the list of sets, and select the Home tab. 1 Home Select an item and change the corresponding setting. Power z On: Power on a selected display. z Off: Power off a selected display. Input Input Source : Change the input source. z Input sources available can vary depending on the Display Device Models.
3 Using MDC 3 z Alert Fault Device This menu shows a list of display devices which have following errors - fan error, temperature error, brightness sensor error, or lamp error. Select a display device from the list. The Repair button will be enabled. Click the refresh button to refresh the error status of the display device. The recovered display device will disappear from the Fault Device List. z Fault Device Alert Display device in which error is detected will be reported by email.
3 Using MDC 3.3.9 Screen Adjustment The screen settings (contrast, brightness, etc.) can be adjusted. Choose display devices from the list of sets, and select the Picture tab. Custom Select an item and change the corresponding screen setting. z Color and Tint are not available if the input source is PC. z Red, Green, Blue and PC Screen Adjustment are not available if the input source is Video.
3 Using MDC Blue z Customize the intensity of blue color for the selected display device. Options Dynamic Contrast Adjust the Dynamic Contrast for the selected display device. Gamma Control Change the gamma value for the selected display. Auto Motion Plus This option is used to view dynamic images. z Off: Disable the Auto Motion Plus function. z Clear: Set the level of Auto Motion Plus to clear. This mode is suitable to display vivid images.
3 Using MDC Size Picture Size Adjust the screen size for the selected display device. The Detail item will be disabled if Picture Size is set to a mode that does not support detailed configuration. The -/+ buttons can be used to adjust Zoom. The screen can be relocated using the up/down/left/right buttons. Detail You can view details of the selected screen size. PC Screen Adjustment Frequency adjustment or fine-tuning is available by using the -/+ buttons in Coarse or Fine.
3 Using MDC 3.3.10 Sound Adjustment You can change the sound settings. Choose display devices from the list of sets, and select the Sound tab. The Bass or Treble item will be disabled if the item is not supported by the selected set. Bass Adjust the bass for the selected display. Treble Adjust the treble for the selected display. Balance(L/R) Adjust the volume of the left and right speakers of the selected display device.
3 Using MDC 3.3.11 System Setup Choose display devices from the list of sets, and select the System tab. Video Wall The Video Wall function can be used to display part of a whole picture or repeat the same picture on each of connected multiple display devices. Video Wall is enabled only when devices are in the group. Video Wall Enable or disable Video Wall. Format Select the format to display the split screen.
3 Using MDC H Select the number of horizontal display devices. A maximum of 15 displays can be arranged in a row. A maximum of 6 can be assigned to V if 15 is assigned to H. V Select the number of vertical display devices. A maximum of 15 displays can be arranged in a row. A maximum of 6 can be assigned to V if 15 is assigned to H. Screen Position View the layout of displays (configured by the screen divider) or change the layout as required.
3 Using MDC PIP Basic information required to adjust PIP will appear in the menu screen. z PIP will be disabled when Video Wall is ON. z Note that Picture Size is disabled when PIP is ON. PIP Size View the PIP Size of the current display. PIP Source Select a PIP input source. Sound Select Select and enable the sound from either the primary screen or secondary screen. Channel The channel can be changed if PIP Source is TV.
3 Using MDC General User Auto Color Automatically adjust the screen colors. Available only in PC mode. Auto Power Set the product to automatically power on. Standby Control Set the standby mode to activate if an input source is not detected. Fan & Temperature Configure the settings required to detect the fan speed and internal temperature for the product's protection. Fan Control Select a method to configure the fan speed. Fan Speed Configure the fan speed.
3 Using MDC Security Safety Lock Lock the on-screen menus. To unlock the menus, set Safety Lock to Off. Button Lock Lock the buttons on the display device. To unlock the buttons, set Button Lock to Off. OSD Display Source OSD Select whether to display a message when the Source is changed. Not Optimum Mode OSD Select whether to display a message when a non-compatible mode is selected. No Signal OSD Select whether to display a message when there is no input signal.
3 Using MDC Time Clock Set Change the current time on the selected display device according to the time set on a PC. If the time is not set on the display device, null values will be displayed. Timer z On Time: Set the time to power on the selected display device. z Off Time: Set the time to power off the selected display device. z Volume: Specify the volume of the display device when it is powered on by On Time.
3 Using MDC Once: Activate the timer only one time. EveryDay: Activate the timer every day. Mon~Fri: Activate the timer from Monday through Friday. Mon~Sat: Activate the timer from Monday through Saturday. Sat~Sun: Activate the timer on Saturdays and Sundays. Manual: Customize days of the week. The checkboxes to select days of the week below Repeat are enabled only if Manual is selected.
3 Using MDC Screen Burn Protection Pixel Shift Move the screen slightly at specified time intervals to prevent screen burn-in. Screen Saver This function prevents screen burn-in when the screen of the selected display device is left idle for an extended period of time. z Interval: Set the interval to activate the Screen Saver. z Mode: The Time setting can vary for each Mode.
3 Using MDC Safety Screen The Safety Screen function can be used to prevent screen burn-in when a stationary image displays on the screen of a display device for an extended period of time. Lamp Control Lamp Control is used to adjust the backlight to reduce power consumption. Automatically adjust the backlight of the selected display device at a specified time. If Manual Lamp Control is adjusted, Auto Lamp Control will automatically switch to Off. Manually adjust the backlight for the selected display.
3 Using MDC 3.3.12 Tool Settings 1 1 2 3 4 Security Panel Control Turn on or off the screen of a display device. Remote Control Enable or disable the remote control. 2 Reset Reset Picture Reset the screen settings. Reset Sound Reset the sound settings. Reset System Reset the system settings. Reset All Reset the screen, sound and system settings at the same time.
3 Using MDC 3 Edit Column Select the items you want to display in the list of sets. 4 Information View the program information.
3 Using MDC 3.3.13 Other Functions Resizing a Window Place the mouse pointer on a corner of the program window. An arrow will appear. Move the arrow to customize the size of the program window.
3 Using MDC Group Management Creating Groups Create groups and manage the list of sets on a group basis. Duplicate group names cannot be used. 1 Right-click and select Group Edit in the display device list section on the left side of the program window. 2 In the Edit Group window displayed, click Add on the same level or Add on the sub level. z Add on the same level: Create a group on the same level as the selected group.
3 Using MDC z 3 Add on the sub level: Create a sub-group under the selected group. Enter the group name. Deleting Groups 1 2 Select a group name, and click Edit. 3 Click Yes. The group will be deleted. In the Edit Group window displayed, click Delete. Renaming Groups 1 2 Select a group name, and click Edit. In the Edit Group window displayed, click Rename. Rename 3 If a cursor appears in the old group name, enter a new group name.
3 Using MDC Schedule Management Creating Schedules Create and register a schedule on a group basis. 1 Click All Schedule List in the schedule section on the left side of the program window. The Add button will be enabled in the middle. 2 Click the Add button. The Add Schedule window will appear.
3 Using MDC 3 Click Add below the Device Group item, and select the group you want to add a schedule to. 4 Select Date&Time/Action and click OK. The schedule will be added and a list of schedules will appear in the set list window. z Device Group: Select a group. z Date&Time z Instant Execution: Run the schedule immediately. Timer: Set the date, time and interval to run the schedule. Action: Select a function that will activate at the specified time and interval.
3 Using MDC 3.3.14 Troubleshooting Guide Issue The display you want to control does not appear on the system information chart. Solution 1. Check the connection of the RS232C cable (check that the cable is properly connected to appropriate serial port). 2. Check that another display with a duplicate ID is not connected. Connecting displays with a duplicate ID can cause the displays not to be shown due to data collision. 3. Check that the display ID is within the range of 0 and 99.
3 Using MDC How display properties are shown when multiple displays are used 1 2 3 When no display is selected: The default value is displayed. When one display is selected: Settings for the selected display are displayed. When two displays are selected (e.g. in sequence of ID 1 and ID 3): The settings for ID 1 are displayed before the settings for ID 3. 4 When the All+Select checkbox is checked and all displays are selected: The default settings are displayed.
4 Screen Adjustment Configure the Picture settings (Brightness, Color Tone, etc.). The layout of the Picture menu options may vary depending on the product. 4.1 Picture Mode MENU [m] Picture Picture Mode ENTER [ ] Select a picture mode (Picture Mode) suitable for the environment where the product will be used. Different Picture Mode options are displayed depending on the current input source.
4 4.2 Screen Adjustment Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R) MENU [m] Picture ENTER [ ] Your monitor has several options for adjusting picture quality. Select an option using the keys, and then press [ When done, press [ and arrow ]. Use the arrow keys to adjust the option value or select an option setting. ]. z When you make changes to Backlight, Contrast, Brightness, Sharpness, Color or Tint (G/R), the OSD will be adjusted accordingly.
4 4.3 Screen Adjustment Screen Adjustment MENU [m] Picture Screen Adjustment ENTER [ ] Screen Adjustment provides various picture size and aspect ratio options. Select an option using the and arrow keys, and the press [ press [ ]. Use the arrow keys to select an option in the sub-menu, and then ]. Different Screen Adjustment options are displayed depending on the current input source.
4 Screen Adjustment Do not set your product to 4:3 format for a long time. The borders displayed on the left and right, or top and bottom of the screen may cause image retention (screen burn) which is not covered by the warranty. z Screen Fit: Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p) signals are inputted. z Custom: Changes the resolution to suit the user's preferences.
4 Screen Adjustment 4.3.2 Position Adjusts the picture position. Position is only available if Picture Size is set to Zoom1, Zoom2, Wide Fit, Screen fit or Custom. z To use the Position function after selecting Zoom1, Zoom2, Wide Fit, Screen fit or Custom, follow these steps. 1 2 3 4 5 Press the button to select Position. Press the [ Press the ] button. or Press the [ button to move the picture up or down. ] button. Select Close by pressing the and buttons sequentially.
4 Screen Adjustment 4.3.4 Resolution Select If the picture is not normal even when the resolution of the graphics card is one of the following, you can optimize the picture quality by selecting the same resolution for the product as the PC using this menu. Available resolutions: Off / 1024 x 768 / 1280 x 768 / 1360 x 768 / 1366 x 768 The Resolution Select option is only enabled when the input source is PC. 4.
4 4.5 Screen Adjustment Advanced Settings MENU [m] Picture Advanced Settings ENTER [ ] All Advanced Settings are available in the Standard and Movie modes. To use, select an option using the up and down arrow keys, and then press [ and then press [ ]. Use the arrow keys to change the value or setting, ]. In PC mode, you can only make changes to Gamma and White Balance.
4 Screen Adjustment 4.5.4 Gamma Adjust the primary color intensity. 4.5.5 Expert Pattern Use the Expert Pattern function to calibrate the picture. If the OSD menu disappears or a menu other than the Picture menu is opened, the product saves the calibration and the Expert Pattern screen disappears. Off z Turns the Expert Pattern function off. Pattern1 z This test screen demonstrates the effect of the display settings on shades of grey and black.
4 Screen Adjustment 4.5.9 10p White Balance (Off / On) Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness. z Interval: Select interval to adjust. z Red: Adjust the red level. z Green: Adjust the green level. z Blue: Adjust the blue level. z Reset: Resets the 10p White Balance to its default settings. z Available when the Picture Mode is set to Movie and when the external input is set to all input.
4 4.6 Screen Adjustment Picture Options MENU [m] Picture Select an option using the setting, and then press [ Picture Options and ENTER [ arrow keys, and the press [ ] ]. Use the arrow keys to change the ]. In PC mode, you can only make changes to the Color Tone. Picture Options Color Tone Color Temp. Off 10000K Digital Noise Filter Off MPEG Noise Filter Off HDMI Black Level Flim Mode Auto Motion Plus Normal Off Standard The displayed image may differ depending on the model. 4.6.
4 Screen Adjustment 4.6.3 Digital Noise Filter If the broadcast signal received by your product is weak, you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen. z Off / Low / Medium / High / Auto / Auto Visualization z Auto Visualization: When changing analog channels, displays signal strength. Only available for analog channels. When bar is green, is that the best possible signal.
4 Screen Adjustment z Smooth : Sets Auto Motion Plus to Smooth (suitable for viewing moving images naturally) mode. z Custom : Use to reduce the afterimage and judder as much as you want. z Demo : Demonstrates Auto Motion Plus (the picture will be displayed on the left half of the screen when Auto Motion Plus is set to On). z Blur Reduction : Use to reduce the afterimage as much as you want. This is only supported if the Auto Motion Plus is set to Custom.
5 5.1 Sound Adjustment Configure the sound (Sound) settings for the product. Sound Mode MENU [m] Sound Sound Mode ENTER [ ] Use the up and down arrow keys to select an option, and then press [ ]. Sound Sound Mode Standard Sound Effect Broadcast Audio Options Speacker Settings Reset Sound The displayed image may differ depending on the model. z Standard: Selects the normal sound mode. z Music: Emphasizes music over voices. z Movie: Provides the best sound for movies.
5 5.2 Sound Adjustment Sound Effect MENU [m] z Sound Sound Effect ENTER [ ] z If Speaker Select is set to External, Sound Effect is disabled. z Available only when Sound Mode is set to Standard. SRS TruSurround HD (Off / On) This function provides a virtual 5.1 channel surround sound experience through a pair of speakers using HRTF(Head Related Transfer Function) technology.
5 5.3 Sound Adjustment Broadcast Audio Options MENU [m] z Sound Broadcast Audio Options ENTER [ ] Preferred Language (digital channels only) Use the up and down arrow keys to select a language, and then press [ ]. Digital-TV broadcasts can simultaneously transmit many audio tracks (for example, simultaneous translations of the program into foreign languages). You can only select a language from among the ones being broadcasted.
5 5.4 Sound Adjustment Speaker Settings MENU [m] z Sound Speaker Settings ENTER [ ] Speaker Select (External / Internal) If you are listening to the sound track of a broadcast or movie through an external receiver, you may hear a sound echo caused by the difference in decoding speed between the TV’s speakers and the speakers attached to your audio receiver. If this occurs, set the TV to External. z When you set Speaker Select to External, the TV’s speakers are turned off.
6 6.1 Media Favorites MENU [m] Media Favorites ENTER [ ] View all of your favorite channels. Media Favorites Channel MagicInfo Lite Videos Photos Music Source The displayed image may differ depending on the model. Your favorite channels are organized in up to five groups (Favorites 1 - 5). If you want to change from one favorite group to another, follow these steps. 1 Move the cursor to the group name displayed on the top of the screen, and then press the [ ] button. A list of groups appears.
6 Media 6.1.1 Functions on the Favorites Screen To access the functions listed below, use the arrow buttons to move the cursor to the icon of your choice on the top right corner of the screen, and then press [ z View Mode ]. : Toggles between the Text view and Thumbnail view of your favorite channels. Thumbnail view displays a picture of the program currently on. z Antenna : Toggles between Air and Cable.
6 6.2 Media Channel MENU [m] Media ENTER [ Channel ] Using the Channel function, you can add channels, delete Added channels, set Favorite channels, use the program guide for digital broadcasts and change between the All Channels and Added Ch. screen. You can also change the antenna or channel settings by selecting the icons in the top right corner of the screen. 6.2.1 Channel Manager MENU [m] z Antenna Media Channel Channel Manager ENTER [ ] : Toggle between Air or Cable.
6 Media Using Edit Mode to Delete a Channel from the Channel List 1 2 Select the Edit Mode icon on the upper right of your screen, and then press the [ Press the / / / buttons to select a channel, and then press [ ] button. ]. A check appears to the left of the channel. 3 z You can select more than one channel. z Pressing [ ] again deselects the channel. Select Delete at the bottom of your screen, and then press [ ]. A pop-up appears asking if you want to delete the item.
6 Media z z Delete only appears if you have selected an added channel on the Added Ch. or All Channels list. z You can also delete a channel on the All Channels list. Added channels are bright. Deleted channels are dim. To delete an Added channel on the All Channels list, select a bright channel, press the TOOLS button, select Delete, press [ ], then press [ ] again. Edit Favorites: Setting channels you watch frequently as favorites. To set channels as favorites, follow these steps.
6 Media 6.2.2 Antenna MENU [m] Media Channel Antenna ENTER [ ] Your TV memorizes channels and adds the memorized channels to the Channel. Before your TV can memorize channels, you must specify the signal source, either Air or Cable. If you select cable, when you start Auto Program, you must also specify the cable system type, STD, HRC, or IRC. If you don’t know your cable system type, contact your local cable company for the information. Most cable companies use STD. z Air / Cable 6.2.
6 Media 6.2.4 Clear Scrambled Channel MENU [m] Media Channel ENTER [ Clear Scrambled Channel ] This function filters out scrambled channels after Auto Program is completed. This process may take up to 20~30 minutes. How to Stop the Clear Scrambled Channels function 1 2 3 Press the [ Press the [ Press the [ ] button to select Stop. ] button to select Yes. ] button. This function is only available in Cable mode. 6.2.
6 6.3 Media MagicInfo Lite MENU [m] Media ENTER [ MagicInfo Lite ] Press the MagicInfo Lite button on the remote control. MagicInfo Lite Player allows you to play content (image, video, document files) at a desired time. You can play content saved in internal memory or USB memory. You can also play content via MagicInfo Lite Server after connecting to a network. For further details about how to use MagicInfo Lite Server, refer to 182 page the MagicInfo Lite Server user manual.
6 Media Supported Video Subitle Formats (for language subtiles, etc.) Name File extension Format MPEG-4 time-based text .ttxt XML SAMI smi HTML SubRip .srt string-based SubViewer .sub string-based Micro DVD .sub or .txt string-based Supported Video Formats File Extension Container Video Codec Resolution Frame rate (fps) Bit rate (Mbps) DivX 3.11 / 4.x / 5.1 / 6.0 1920 x 1080 6 ~ 30 8 Audio Codec MP3 / AC3 *.avi AVI *.mkv MKV H.
6 Media File Extension Container VRO *.vro VOB *.mpg PS *.mpeg *.ts *.tp TS *.trp Video Codec Resolution Frame rate (fps) Bit rate (Mbps) Audio Codec MPEG1 352 x 288 24 / 25 / 30 30 MPEG2 1920 x 1080 24 / 25 / 30 30 AC3 / MPEG / LPCM MPEG1 352 x 288 24 / 25 / 30 30 MPEG2 1920 x 1080 24 / 25 / 30 30 H.264 1920 x 1080 6 ~ 30 25 AC3 / MPEG / LPCM / AAC MPEG2 1920 x 1080 24 / 25 / 30 30 AC3 / AAC / H.
6 Media Using the Play Continuously Function (Resume Play) If you exit a movie when it is playing, you can play the movie later from the point where you stopped it. The Resume function does not support multiple users. (It will only memorize the point where the most recent user stopped playing.) 1 2 3 Select the movie file you stopped and want to resume by pressing the Press the [ ▶ ] (Play) or [ or button. ] button. Press Resume Icon on control panel for resume.
6 6.5 Media Photos MENU [m] Media Photos ENTER [ ] Connecting a USB Device 1 2 Turn on your product. Connect a USB device containing photo, music and/or movie files to the USB port on the back or side panel of the product. 3 When a USB device is connected to the product, the Connected Device screen appears. Select a connected device, and then press [ ]. 6.5.1 Viewing a Photo (or Slide Show) 1 2 Press the / Press the [ / / button to select the desired file in the file list. ] button.
6 Music MENU [m] Media ENTER [ Music ] Connecting a USB Device 1 2 Turn on your product. Connect a USB device containing photo, music and/or movie files to the USB port on the back or side panel of the product. 3 When a USB device is connected to the product, the Connected Device screen appears. Select a connected device, and then press [ ]. 6.6.1 Playing Music 1 2 Press the / Press the [ / / button to select the desired music file in the file list. ] button or [ ▶ ] (Play) button.
6 Media Playing My Playlist Select the My Playlist folder and it will play automatically. Press the or button to play a different music file within the play list. To delete a file from My Playlist, select the recycle bin icon next to the file you want to delete by using the direction buttons, and then press [ ]. The file will be deleted from My Playlist.
6 6.7 Media Videos / Photos / Music - Additional Functions 6.7.1 Sorting the file lists To sort files in the file lists, select the button. Then, press the [ Sort Criteria (Sorting) icon in the top right of the screen by using the / / / ] button. The checks below indicate which media the sort criteria apply to. Operation Videos Photos Music Folder view Displays the whole folder. You can view the file name and thumbnail by selecting the folder.
6 Media 6.7.2 Videos / Photos / Music Play Option menu When playing video or photo files, you can press the TOOLS button to display an Options menu. Below are a series of tables listing the options available and the media each option applies to. Option Name Operations List Return to the file list. Play / Pause You can start or stop. Alternatively, the (Play) or be used. II Videos Photos Music c c c ▶ (Pause) button on the remote can c c Previous / Next Go to previous / next photo file.
Option Name Operations Videos Start Slide Show / Stop Slide Show You can start or stop a slide show. Slide Show Speed You can select the slide show speed during Alternatively, use the remote. ▶ or II button on the the slide show. Alternatively, use the ◀◀ 6 Media ◀◀ or Photos Music c c button on the remote. Slide Show Effect You can set various slide show effects. c Background Music On / Off You can start or stop background music.
6 6.8 Media Source MENU [m] Media Source ENTER [ ] Source allows you to select a variety of sources and change source device names. 6.8.1 Source You can display the screen of a source device connected to the product. Select a source from Source List to display the screen of the selected source. Media Favorites Channel MagicInfo Lite Videos Photos Music Source The displayed image may differ depending on the model.
6 Media 6.8.2 Edit Name MENU [m] Media Source TOOLS ENTER [ Edit Name ] You can rename a connected source device. z Sometimes the screen will not display properly unless the name of a source device is specified in Edit Name. In addition, it is best to rename the source device in Edit Name to obtain optimal picture quality. The list can include the following source devices. Source devices on the list differ depending on the selected source.
7 7.1 Network Network Setting 7.1.1 Connecting to a Wired Network There are three ways to attach your product to your LAN using cable. z You can attach your product to your LAN by connecting the LAN port on the back of your product to an external modem using a LAN cable. See the diagram below.
7 Network access the Internet so you do not have to enter them manually. Most home networks are Dynamic Networks. Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet mask, gateway, and DNS values manually on your product Cable Setup Screen when you set up the network connection. To get the IP address, subnet mask, gateway, and DNS values, contact your Internet Service Provider (ISP).
7 Network Automatic Network Settings Use the Automatic Network Settings when connecting your product to a network that supports DHCP. To set up your product cable network connection automatically, follow these steps. How to set up automatically 1 2 3 Go to the Network Settings screen. Select Wired, press [ ], and then press [ ] again. The network test screen appears and verifies the network connection. When the connection has been verified, the “Internet is connected successfully.” message appears.
7 Network If you make a mistake when entering a number, re-enter the number to correct it. You can also press the up or down arrow button to change the number one unit at a time. 9 10 11 12 When done entering the IP Address, press [ ]. Press the down arrow key to go to the Subnet Mask fields, and then press [ ]. Repeat the same entry process for Subnet Mask, Gateway, and DNS Server. When done, select OK at the bottom of the page, and then press [ ].
7 Network 7.1.3 Connecting to a Wireless Network To connect your product to your network wireless, you need a wireless router or modem and a Samsung Wireless LAN adapter (WIS10ABGN, WIS12ABGNX) , which you connect to your product back or side panel USB port. See the illustration below.
7 Network z WPS (PBC) One Foot Connection The product may not recognize the “Samsung Wireless LAN adapter” if you connect it to the product with a USB hub or USB extension cable other than the cable supplied with the product. 7.1.4 Wireless Network Setting Automatic Network Setup Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key.
7 Network Manual Network Setup Use the Manual Network Settings when connecting your product to a network that requires a Static IP address or if the automatic connection process has failed. Getting the Network Connection Values To view the Network connection values on most Windows computers, follow these steps. 1 2 3 4 Right click the Network icon on the bottom right of the screen. In the pop-up menu that appears, click Status. On the dialog that appears, click the Support tab.
7 Network 13 Repeat the entry process for each field in the IP Address. If you make a mistake when entering a number, re-enter the number to correct it. You can also press the 14 15 16 17 or button to change the number one unit at a time. When done entering the IP Address, press [ Press the ]. button to go to the Subnet Mask fields, and then press [ ]. Repeat the same entry process for Subnet Mask, Gateway, and DNS Server. When done, select OK at the bottom of the page, and then press [ ].
7 Network 7.1.6 One Foot Connection The One Foot Connection function lets you connect your Samsung product automatically to a Samsung wireless routers. If your wireless router does not support One Foot Connection, you must connect using one of the other methods. You can check for equipment that supports One Foot Connection on www.samsung.com. How to set up using One Foot Connection 1 2 3 4 Turn on the Samsung wireless router and the product. Go to Network Settings screen.
7 Network 7.1.7 Ad Hoc Network Setup You can connect to a mobile device supporting Ad-hoc connections without a wireless router or AP through the product. How to set up using Ad hoc 1 2 3 Go to Network Settings screen. Select Wireless (General), and press [ ], then press [ ] again. Select Ad hoc. The message “Ad hoc service supports a direct connection with Wi-Fi compatible devices like a cell phone or PC. Other network services may be limited.
7 7.2 Network Network Status MENU [m] Network Network Status ENTER [ ] You can check the current network and Internet status. Network Network Settings Network Status MagicInfo Lite Settings The displayed image may differ depending on the model.
7 7.3 Network MagicInfo Lite Settings MENU [m] 1 Network MagicInfo Lite Settings ENTER [ ] Server z Setting the MagicInfo Lite Server IP Enter the server IP address and port number. Use 7001 as the port number. If unable to connect to the server using port number 7001, check with your server administrator to find the correct port number and then change the port number. z FTP Mode Select an FTP operating mode: Active or Passive.
8 8.1 System Plug & Play MENU [m] System Plug & Play ENTER [ ] When the product is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the [ 1 ] button. Plug & Play is available only when the Input Source is set to TV. Selecting a language Press the or button, then press the [ ] button. Select the desired OSD (On Screen Display) language. 2 Setting up the Network Set up your network connection. Press the [ ] button to start.
8 8.2 System Multi Control MENU [m] System Multi Control ENTER [ ] Assign an individual ID to your product. 8.2.1 Configuring settings for Multi Control z MDC Connection Select a method to connect to MDC to receive the MDC signal. RS232C MDC Communicate with MDC via the RS232C-stereo cable. RJ45 MDC Communicate with MDC via the RJ45 cable. z ID Setup Assign an ID to a set. (Range: 0~99) Press z or to select a number, and press [ ].
8 8.3 System Time MENU [m] System Time ENTER [ ] You can configure Clock Set or Sleep Timer. You can also set the product to automatically turn on or off at a specified time using the Timer function. 8.3.1 Clock Set the clock to use the various various timer features of the product. Changing the Setting for Clock z Clock Mode Set the current time manually or automatically. Auto: Have the product set the current time automatically using the time from a digital channel.
8 System 8.3.2 Sleep Timer Automatically shuts off the product after a preset period of time. (Off, 30 min, 60 min, 90 min, 120 min, 150 min and 180 min). Use the up and down arrows to select a period of time, and then press [ ]. To cancel Sleep Timer, select Off. 8.3.3 On Timer Set On Timer so that your product turns on automatically at a time and on a day of your choosing. z On Timer: You can set up three separate On Timer configurations.
8 System 8.3.4 Off Timer You can set up three separate Off Timer configurations. (Off Timer 1, Off Timer 2, Off Timer 3) You must set the clock before you can use Off Timer. Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. If you select Manual, you can choose the days you want Off Timer to turn off your product. z The check mark indicates days you’ve selected. Time: Set the hour and minute. Use the number buttons or the up and down arrow keys to enter numbers.
8 8.4 System Menu Language MENU [m] System Menu Language ENTER [ ] Set the menu language. A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions on your PC. 8.5 Eco Solution MENU [m] System Eco Solution ENTER [ ] Eco Solution Energy Saving Off Eco Sensor Off No Signal Power Off Auto Power Off 15 min. Off The displayed image may differ depending on the model. 8.5.
8 System 8.5.2 Eco Sensor (Off / On) To enhance your power savings, the picture settings will automatically adapt to the light in the room. If you adjust Backlight in the Picture menu, Eco Sensor will be set to Off. z Min. Backlight: When Eco sensor is On, you can manually adjust the minimum screen brightness. If Eco Sensor is On, the display brightness may change (become slightly darker or brighter) depending on the surrounding light intensity.
8 8.6 System Caption MENU [m] System Caption ENTER [ ] (On-Screen Text Messages) 8.6.1 Caption You can switch the caption function on or off. If captions are not available, they will not be displayed on the screen. z Off / On The Caption feature does not work with devices connected to the product through the Component, HDMI or PC input jacks. 8.6.2 Caption Mode You can select the desired caption mode. The availability of captions depends on the program being Broadcasted.
8 System 8.6.3 Digital Caption Options (digital channels only) Adjusts the each option. When done, select Close. z Size: Options include Default, Small, Standard and Large. The default is Standard. z Font Style: Options include Default and Styles 0 to 7. The default is Style 0. z Foreground Color: You can change the color of the letters. Options include Default, White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. The default is White.
8 8.7 System Security MENU [m] System Security ENTER [ ] Every time you access the Security functions, the PIN screen will appear and the default PIN number is “0-0-0-0". The PIN screen closes and the Security menu appears. Security Safety Lock Off Button Lock Off Program Rating Lock On Change PIN The displayed image may differ depending on the model. 8.7.1 Safety Lock (Off / On) It sets safe lock function.
8 System 8.7.3 Program Rating Lock (Off / On) When turned on, the Program Rating Lock feature can automatically block programs that you deem inappropriate for your children. You must enter a PIN (personal identification number) before you can set or change any of the Program Rating Lock restrictions. z z Program Rating Lock is not available in HDMI, Component or PC mode. z The default PIN number for a new product set is “0-0-0-0”. TV Rating: You can block TV programs based on their ratings.
8 System z Canadian English Rating: You can block TV programs based on their Anglophone Canadian rating. Canadian English Rating displays a column with locks and the following ratings categories. C: Programming intended for children under age 8. / C8+: Programming generally considered acceptable for children 8 years and over to watch on their own. / G: General programming, suitable for all audiences. / PG: Parental Guidance.
8 System 8.7.4 Change PIN The Change PIN screen will appear. Choose any 4 digits for your PIN and enter it in Enter New PIN. Reenter the same 4 digits in Confirm New PIN. When the Confirm screen disappears, press the Close button. The product has memorized your new PIN. 8.8 PIP MENU [m] z System PIP , ENTER [ ] z If you have set Double( Size. ) mode in PIP (Picture-in-Picture), you cannot adjust the Picture z For PIP sound, refer to the Sound Select instructions.
8 System Size ( , Position ( , , , , In Double ( , , , ): Select a size for the subpicture. ): Select a position for the sub-picture. , ) mode, you cannot select Position. Sound Select (Main / Sub): You can choose to listen to the sound from the Main picture or the Sub picture. 8.
8 System 8.10 Screen Burn Protection MENU [m] System Screen Burn Protection ENTER [ ] To reduce the possibility of screen burn, this unit is equipped with Pixel Shift screen burn prevention technology. Pixel Shift moves the picture slightly on the screen. The Pixel Shift Time setting allows you to program the time between movements of the picture in minutes. Screen Burn Protection Pixel Shift Off Timer Off Pixel Side Gray Off The displayed image may differ depending on the model. 8.10.
8 System 8.10.2 Timer You can set the timer for Screen Burn Protection. If you start the operation to erase any residual image, the operation will be performed for the set period of time and then automatically finish. z Mode: You can change the Safety Screen Type. z Period: Use this function to set the execution period for each mode set in the timer. z Time: Within the set period of time specify a time for execution. 8.10.
8 System 8.11 Video Wall MENU [m] System Video Wall ENTER [ ] Customize the layout of multiple displays that are connected to form a video wall. In addition, display part of a whole picture or repeat the same picture on each of the connected multiple displays. To display multiple images, refer to MDC Help or the MagicInfo user guide. Some models may not support the MagicInfo function.
8 System 8.11.2 Format Select a format to display images on multiple displays. z Full: Display images in full screen. z Natural: Display images at the original resolution without enlarging or reducing. The Format option is only enabled when Video Wall is set to On. 8.11.3 Horizontal This function automatically divides the screen according to the specified number of horizontal displays. Enter the number of horizontally arranged displays.
8 System 8.11.5 Screen Position You can customize the arrangement of split screens by moving displays identified with a number using the Screen Position function. Select Screen Position to display the arrangement of displays (identified with a number) specified according to the Horizontal or Vertical settings. To customize the arrangement, move a number (display) using the direction buttons on the remote control and press [ ]. z A maximum of 100 displays can be arranged in Screen Position.
8 System 8.12 Source AutoSwitch Settings MENU [m] System Source AutoSwitch Settings ENTER [ ] Turning on the display with Source AutoSwitch On, and the previous video source selection is not active, the display will automatically search the different video input sources for active video. z Source AutoSwitch When the Source AutoSwitch is On, the display video source will automatically be searched for active video.
8 System 8.13 General MENU [m] System General ENTER [ ] General Max. Power Saving On Game Mode Off BD Wise On Auto Power Off Standby Control Auto Lamp Schedule Off OSD Display The displayed image may differ depending on the model. 8.13.1 Max. Power Saving Turns off the product to reduce power consumption after the PC has been left idle for a specified period of time. Available only PC mode. 8.13.
8 System 8.13.3 BD Wise Provides the optimal picture quality for Samsung DVD, Blu-ray and Home Theater products which support BD Wise. When BD Wise is turned On, the picture mode is automatically changed to the optimal resolution. Available when you connect Samsung products that support BD Wise through an HDMI cable to the product. 8.13.4 Auto Power Enabling this option will automatically power on the product if the power cable is connected. 8.13.
8 System 8.13.8 Power On Adjustment You can set the warm-up time for the screen to turn on after the power button is pressed. (Range: 0 – 50 seconds) A warm-up time that is too short may damage the product due to overvoltage. 8.13.9 Temperature Control This function detects the internal temperature of the product. You can specify the temperature range that is acceptable. The default temperature is set to 77 C.
8 System 8.14 Anynet+ (HDMI-CEC) MENU [m] 8.14.1 System Anynet+ (HDMI-CEC) ENTER [ ] Anynet+ (HDMI-CEC) What is Anynet+? Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung product remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.
8 System Anynet+ Menu The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the product. Anynet+ Menu View PC Device List Description Changes Anynet+ mode to PC mode. Shows the Anynet+ device list. (device_name) MENU Shows the menu of the connected device menus. E.g. if a DVD player is connected, the disc menu of the DVD player will appear. (device_name) Tools Shows the tools menu of the connected device. E.g.
8 System z 8.14.3 If you have selected an Anynet+ device by pressing the SOURCE button and then selecting its input source, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Device List. Receiver You can listen to sound through a Receiver (i.e. Home Theater) instead of the product Speaker. To listen to sound through a receiver, go to Receiver screen (System Anynet+ (HDMI-CEC) Receiver). Then select Receiver and set to On.
8 System Problem Possible Solution The message “Connecting to Anynet+ device...” appears on the screen. z You cannot use the remote control when you are configuring Anynet+ or switching to a view mode. z Use the remote control after the product has completed Anynet+ configuration or has finished switching to Anynet+. The Anynet+ device does not play. The connected device is not displayed. z You cannot use the play function when Plug & Play (initial setup) is in progress.
8 System 8.16 Network Remote Control MENU [m] System ENTER [ Network Remote Control ] Turn on/off or give permission to Samsung mobile phone devices to connect with and control the product. You must have a Samsung Mobile phone/device which supports Wireless Remote Control. For more details, refer to each device’s manual. 8.17 Reset System MENU [m] System Reset System ENTER [ ] This option returns the current settings under system to the default factory settings. 8.
9 9.1 Support Software Upgrade MENU [m] Support Software Upgrade ENTER [ ] The Software Upgrade menu lets you upgrade your TV’s software to the latest version. z Current Version: This is the software version already installed in the TV. Be careful not to turn off the power until the upgrade is complete. The TV will turn off and on automatically after completing the software upgrade. When you upgrade software, all video and audio settings you have made will return to their default settings.
9 Support 9.1.2 z Alternative Software Alternative Software The Alternative Software option lets you upgrade using a file the TV downloaded earlier, but you decided not to install immediately, or a file downloaded by the TV in Standby Mode. To upgrade By Alternative Software, follow these steps. 1 If upgrade software has been downloaded, you will see the software version number to the right of Alternative Software. 2 3 4 9.2 Select Alternative Software, and then press the [ ] button.
10 MagicInfo Lite 10.1 File Formats Compatible with MagicInfo Lite Player [Read before using MagicInfo Lite Player] z Supported USB-device file systems include FAT16 and FAT32. (NTFS is not supported.) z A file with a vertical and horizontal resolution larger than the maximum resolution cannot be played. Check the vertical and horizontal resolution of the file. z Video that does not contain audio data is not supported. Check that the video file contains audio data.
10 MagicInfo Lite File Extension *.mp4 *.3gp *.vro *.mpg *.mpeg Video Codec Resolution Frame rate(fps) Bit rate (Mbps) Audio Codec H.264 BP / MP / HP 1920 x 1080 6 ~ 30 25 MPEG4 SP / ASP 1920 x 1080 6 ~ 30 8 MP3 / ADPCM / AAC H.264 BP / MP / HP 1920 x 1080 6 ~ 30 25 MPEG4 SP / ASP 1920 x 1080 6 ~ 30 8 VRO MPEG1 352 x 288 24 / 25 / 30 30 VOB MPEG2 1920 x 1080 24 / 25 / 30 30 MPEG1 352 x 288 24 / 25 / 30 30 MPEG2 1920 x 1080 24 / 25 / 30 30 H.
10 MagicInfo Lite Audio z Audio content without video is not supported. (Only mp3 files are supported as background music for image/PPT slideshows. This feature is available only when using the network schedule menu.) z Audio content with a Bit rate or Frame rate larger than the rate specified in the table above can cause choppy audio during playback. z WMA 7, 8, 9 STD or lower is supported. z WMA 9 PRO does not support lossless audio and multi-channel audio higher than 2 channels.
10 MagicInfo Lite Power Point z z Compatible document file formats Extension : ppt, pptx Version : Office 97 ~ Office 2007 Functions not supported Animation effect 3D shapes (which will be displayed in 2D) Header and footer (some subitems are not supported) Word Art Align (A group alignment error may occur) Office 2007 (SmartArt is not fully supported. 97 out of 115 subitems are supported.
10 MagicInfo Lite 10.2 Network Schedule 10.2.1 Connecting to a server Network setup To run MagicInfo Lite, connect to a network. Refer to 140 page for details about the Network Settings menu. Server setup Go to MENU Network MagicInfo Lite Settings Server. Next, enter the server information. (E.g.: http://192.168.0.10:7001/MagicInfo/) MagicInfo Lite Server Access Periodically Server Address 192.168.0.
10 MagicInfo Lite 10.2.2 MagicInfo Lite Settings MENU [m] Media MagicInfo Lite ENTER [ ] Press the MagicInfo Lite button on the remote control. You can view whether the server is connected (approval) in the MagicInfo Lite menu screen. To view whether the server is connected when a network schedule is running, press INFO on the remote.
10 MagicInfo Lite 3 Select Device from the top menu bar. 4 Select Lite Device from the menus on the left. 5 Select View Unapproved Lite Device from the sub-menus of Lite Device. 6 Select the Approve button for your device from the list of unapproved Lite devices. Pressing the INFO button on the remote when a network schedule is running will display the details of the schedule. Check that the correct device has been selected by viewing the device ID in the details.
10 7 MagicInfo Lite Enter the information required to approve the device. z Device Name: Enter the device name. z Device Model Name: Select your device model. z Device Group: Select z Location: Enter the current location of the device. to specify the group. 8 Select the View All Lite Device menu to check that the device has been registered. 9 When the device is approved by the server, the schedule registered in the selected group will be downloaded to the device.
10 MagicInfo Lite 10.2.4 Setting the current time A schedule may not run if the time set on the device is different from the server's current time. 1 Go to the tabs Device 2 3 Select your device. Time. Select Clock Set, and sync the time with the server. For further details on how to manage the time (scheduling, holiday management, etc.), refer to the .
10 MagicInfo Lite 10.3 Local Schedule Run a schedule created by Local Schedule Manager. Go to Local Schedule Manager Select the content you want to run This menu is disabled if no schedule was created by Local Schedule Manager. 1 2 Select Local Schedule Manager in the MagicInfo Lite menu screen. Run a schedule created by local schedule. 10.4 Local Schedule Manager Configure the settings for playback from Local Schedule.
10 2 MagicInfo Lite Select Create in the Local Schedule Manager screen. Local Schedule Manager Storage Create Internal Memory Edit No Playing Schedule Delete Run Info Close 3 Select Time to set the time you want to play content. Create Time Contents Time --:-- am ~ --:-- pm Save Contents No Item Cancel 4 Select Contents to specify the content you want to play. Contents Internal Memory No Item USB Folder1 Menu1.jpg Done Menu2.jpg Deselect Cancel 5 Select Save.
10 6 MagicInfo Lite Select the memory space you want to save the content to. Create Time 12:00 am ~ 02:00 pm Delete Conten Where do you want to save? Time Save Conten ancel Internal 7 USB Cancel Check that the schedule has been added to the Local Schedule Manager. Local Schedule Manager Storage Internal Memory No Playing Schedule Create Edit Delete 20110101_1200.
10 MagicInfo Lite 10.4.2 Modifying a Local Schedule Ensure at least one Local Schedule is registered. 1 Select Local Schedule Manager in the MagicInfo Lite menu screen. Network Schedule Local Schedule ・ Local Schedule Manager Contents Manager Close Internal AutoPlay USB AutoPlay 2 Mode Server USB Network Schedule Connected Disconnected Select the local schedule you want to modify. Local Schedule Manager Storage Internal Memory No Playing Schedule Create Edit Delete 20110101_1200.
10 3 MagicInfo Lite Select Edit. Edit Time Delete 12:00 am ~ 02:00 pm Contents Time Menu1.jpg --:-- am ~ --:-- pm Save Contents No Item Cancel Time --:-- am ~ --:-- pm Contents 4 No Item Change the details of the local schedule. Next, select Save. 10.4.3 Deleting a Local Schedule Ensure at least one Local Schedule is registered. 1 Select Local Schedule Manager in the MagicInfo Lite menu screen.
10 2 MagicInfo Lite Select the local schedule you want to delete. Local Schedule Manager Storage Internal Memory Create Edit No Playing Schedule Delete 20110101_1200.Isch Run Info Close 3 Select Delete.
10 MagicInfo Lite 10.4.4 Running a Local Schedule Ensure at least one Local Schedule is registered. 1 Select Local Schedule Manager in the MagicInfo Lite menu screen. Network Schedule Local Schedule ・ Local Schedule Manager Contents Manager Close Internal AutoPlay USB AutoPlay 2 Mode Server USB Network Schedule Connected Disconnected Select the local schedule you want to run. Next, select Run.
10 MagicInfo Lite 10.4.5 Stopping a Local Schedule This function is enabled only when a schedule is running. Selecting Stop will change the running mode from local schedule to network schedule. 1 Select Local Schedule Manager in the MagicInfo Lite menu screen. Network Schedule Local Schedule ・ Local Schedule Manager Contents Manager Close Internal AutoPlay USB AutoPlay 2 Mode Server USB Network Schedule Connected Disconnected Select Stop.
10 MagicInfo Lite 10.4.6 Viewing the details of a Local Schedule 1 Select Local Schedule Manager in the MagicInfo Lite menu screen. Network Schedule Local Schedule ・ Local Schedule Manager Contents Manager Close Internal AutoPlay USB AutoPlay 2 Mode Server USB Network Schedule Connected Disconnected Select the local schedule you want to view the details of. Local Schedule Manager Storage Internal Memory No Playing Schedule Create Edit Delete 20110101_1200.
10 MagicInfo Lite 10.5 Contents Manager 10.5.1 Copying content 1 Select Contents Manager in the MagicInfo Lite menu screen. Network Schedule Local Schedule · Local Schedule Manager Contents Manager Close Internal AutoPlay USB AutoPlay 2 Mode Server USB Network Schedule Connected Disconnected Select the content you want to copy. z If content under Internal Memory is selected: You can copy the content under Internal Memory to USB memory.
10 MagicInfo Lite 10.5.2 Deleting content 1 Select Contents Manager in the MagicInfo Lite menu screen. Network Schedule Local Schedule · Local Schedule Manager Contents Manager Close Internal AutoPlay USB AutoPlay 2 Mode Server USB Network Schedule Connected Disconnected Select the content you want to delete. z Content under Internal Memory and USB memory can be deleted at the same time. Contents Internal Memory No Item USB Folder1 Menu1.jpg Delete Menu2.
10 MagicInfo Lite 10.6 Internal AutoPlay 10.6.1 Running Internal AutoPlay Ensure at least one content item exists under Internal Memory. 1 Select Internal AutoPlay in the MagicInfo Lite menu screen. z Play content, which has been copied to Internal Memory, in alphabetical order. Network Schedule Local Schedule ・ Local Schedule Manager Contents Manager Close Internal AutoPlay USB AutoPlay Mode Server USB Network Schedule Connected Disconnected 10.7 USB AutoPlay 10.7.
10 MagicInfo Lite z USB AutoPlay will automatically run if USB memory is connected when Network Schedule or Local Schedule is running. Network Schedule Local Schedule ・ Local Schedule Manager Contents Manager Close Internal AutoPlay USB AutoPlay Mode Server USB Network Schedule Connected Disconnected 10.8 When Content is Running 10.8.1 Viewing the details of the content that is running Press the INFO button on the remote control.
10 7 MagicInfo Lite Schedule Download: Displays the progress of a network schedule being downloaded from the server Information Software Version : A-VNUSCDSP-100 Device Name : Monitor Device ID : FE-FF-FF-FF-FF Mode : Network Schedule Server : Connected USB : Connected Schedule Download : No Schedule to download Close 10.8.2 Changing the settings for the content that is running Press the TOOLS button on the remote control.
11 Troubleshooting Guide 11.1 Requirements Before Contacting Samsung Customer Service Center 11.1.1 Testing the Product Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check if your product is operating normally by using the product test function. If the screen remains blank while the power LED blinks even when the product is correctly connected to a PC, perform product testing.
11 Troubleshooting Guide 11.1.3 Check the followings. Installation issue (PC mode) The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connection is secure. ("2.2 Connecting and Using a PC") Blank spaces are found at the top and bottom of the screen when an HDMI or HDMI-DVI cable is connected to the product and PC. Blank spaces on the screen are not caused by the product.
11 Troubleshooting Guide Screen issue The screen is not clear. The screen is blurry. Adjust Coarse and Fine. Remove any accessories (video extension cable, etc) and try again. Set the resolution and frequency to the recommended level. The screen appears unstable and shaky. There are shadows or ghost images left on the screen. Check that the resolution and frequency of the PC and graphics card are set within a range compatible with the product.
11 Troubleshooting Guide Remote control issue The remote control does not work. Make sure that the batteries are correctly in place (+/-). Check if the batteries are flat. Check for power failure. Make sure that the power cord is connected. Check for any special lighting or neon signs switched on in the vicinity. Source device issue A beeping sound is heard when my PC is booting. If a beeping sound is heard when your PC is booting, have your PC serviced.
11 Troubleshooting Guide 11.2 Q & A Question How can I change the frequency? Answer Set the frequency on your graphics card. z "Windows XP": Go to Control Panel Themes Display Settings Appearance and Advanced Monitor and adjust the frequency in Monitor Settings. z "Windows ME/2000": Go to Control Panel Settings Advanced Display Monitor and adjust the frequency in Monitor Settings.
11 Troubleshooting Guide Question How can I change the resolution? Answer z "Windows XP": Go to Control Panel Themes z Display Appearance and Settings and adjust the resolution. "Windows ME/2000": Go to Control Panel Display Settings and adjust the resolution. z "Windows Vista": Go to Control Panel Personalization Personalize Appearance and Display Settings and adjust the resolution.
12 Specifications 12.1 General Model Name Panel Size Display area Dimensions (W x H x D) / Weight VESA ME32B ME40B 32 inches (80 cm) 40 inches (101 cm) 698.4 mm (H) x 392.85 mm (V) 885.6 mm (H) x 498.15 mm (V) 27.5 inches (H) x 15.5 inches (V) 34.9 inches (H) x 19.6 inches (V) 733.7 x 430.2 x 29.9 mm / 6.5 kg 921.2 x 536.1 x 29.9 mm / 10.5 kg 28.9 x 16.9 x 1.2 inches / 14.3 Ibs 36.3 x 21.1 x 1.2 inches / 23.1 Ibs 200 x 200 mm / 7.9 x 7.
12 Specifications Model Name Environmental considerations Operating ME32B / ME40B / ME46B / ME55B Temperature : 32˚F ~ 104˚F (0˚C ~ 40˚C) Humidity : 10 % ~ 80 %, non-condensing Storage Temperature : -4˚F ~ 113˚F (-20˚C ~ 45˚C) Humidity : 5 % ~ 95 %, non-condensing Plug-and-Play : This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor settings. Monitor installation takes place automatically.
12 Specifications 12.2 PowerSaver The power-saving function of this product reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or move the mouse. Power-savign mode only functions when the product is connected to a PC with a power-saving function.
12 Specifications 12.3 Preset Timing Modes z This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for your monitor. z Check the frequency when you exchange a CDT monitor (connected to a PC) for an LCD monitor.
12 Specifications Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA, 1366 x 768 47.712 59.790 85.500 +/+ VESA, 1440 x 900 55.935 59.887 106.500 -/+ VESA, 1600 x 900(RB) 60.000 60.000 108.000 +/+ VESA, 1680 x 1050 65.290 59.954 146.250 -/+ VESA, 1920 x 1080 67.500 60.000 148.500 +/+ Horizontal Frequency The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle.
12 Specifications 12.4 License TheaterSound HD, SRS and symbol are trademarks of SRS Labs, Inc. TheaterSound HD technology is incorporated under license form SRS Lab, Inc. Manufactured under license from Dolby Laboratories. Dolby and the doubleD symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks. & DTS 2.
Appendix Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/ca http://www.samsung.com/ca_fr (French) MEXICO 01-800-SAMSUNG (726-7864) http://www.samsung.com LATIN AMERICA ARGENTINA 0800-333-3733 http://www.samsung.com BRAZIL 0800-124-421 4004-0000 http://www.samsung.
Appendix Responsibility for the Pay Service (Cost to Customers) When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc. z If a service technician gives instructions on how to use product or simply adjusts options without disassembling product.
Appendix Optimum Picture Quality and Afterimage Burn-in Prevention Optimum Picture Quality z To enjoy the optimum picture quality, go to Control Panel on your PC and adjust the resolution and refresh rate as follows. The picture quality of TFT-LEDs may degrade if the optimum resolution is not selected.
Appendix Prevention of Afterimage Burn-in What is afterimage burn-in? Afterimage burn-in should not occur when the LCD panel is operating normally. Normal operation refers to a continuously changing video pattern. If the LCD panel displays a fixed pattern for an extended period of time (more than 12 hours), a slight voltage difference may occur between the electrodes in pixels that control the liquid crystals.
Appendix z Powering Off, Screen Saver and Power Saving Mode Power off the product for 2 hours after using it for 12 hours. Go to Display Properties > Power Supply on your PC and set the product to power off as required. Using a screen saver is recommended. It is best to use a single-color or moving-image screen saver.
Appendix Terminology Dot Pitch The product and screen consist of red, green and blue dots. A shorter distance between the dots produces a higher resolution. Dot pitch refers to the distance between the shortest distance between dots of the same color. Dot pitch is measured in millimeters. Vertical Frequency The product displays a single image many times per second (like a fluorescent light that flickers) to display an image for a viewer to see.
Appendix Multiple Display Control (MDC) MDC (Multiple Display Control) is an application that allows multiple display devices to be controlled simultaneously using a PC. Communication between a PC and monitor takes place using RS232C (serial data transmission) and RJ45 (LAN) cables. DVD (Digital Versatile Disc) DVD refers to a CD-sized mass storage disk where you can save multimedia (audio, video or game) applications using MPEG-2 video compression technology.
Index A Music 133 Antenna 64 Anynet+(HDMI-CEC) 175 N No Signal Power Off 158 B Batteries 30 P PC connection 55 C Photos 132 Caption 159 Picture Mode 105 Change PIN 164 Picture Size 107 Clock Mode 154 PIP 164 Contact SAMSUNG WORLDWIDE 217 Plug & Play 152 Custom settings screen 106 Port 27 Problem report 205 E Eco Solution 157 R Edit Name 139 Remote Control 29 Energy Saving 157 Reset All 179 Resolution configuration 58 F Responsibility for the Pay Service (Cost to Customers) 218 Fav
Index W What is MDC? 72 Wired Network 140 WPS(PBC) 147 Index 225
