KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL USER MANUAL SHA104.V2 SHA108.V2 1 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL CONTENTS Chapter 1. Features ................................................................................................................................................... 5 Chapter 2. Panel ........................................................................................................................................................ 6 2.1. Front Panel..............................................
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Chapter 5. Network Access(Remote)....................................................................................................................... 64 5.1. IE Setup ......................................................................................................................................................... 64 5.2. Web Log-in(IE Browser)...........................................................
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Appendix E- Applying free DDNS from internet................................................................................................. 128 Appendix F- The Structure Diagram Of OSD Display.......................................................................................... 134 Appendix G- FAQ Troubleshooting.............................................................................................
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Safety Precautions Do Not touch live electrical parts. Electric shock can be avoided. Follow the recommended practices listed below. Faulty installation, improper grounding, and incorrect operation and maintenance of electrical equipment are always sources of danger. Do Not try to install equipment outdoor, when the wind and rain is strong.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Do Not block the ventilation of equipment. Do Not put the magnetic parts around the Equipment. Do Not put the objects on top of equipment. Warning This is the symbol for indicating any potential hazard, risk or condition requiring special attention. The user needs to refer to the important operating and maintenance or servicing instructions.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL LIMITATION OF LIABILITY THIS PUBLICATION IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTY’S RIGHT. THIS PUBLICATION COULD INCLUDE TECHNICAL INACCUACIES OR TYPOGRAPHICAL ERRORS.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Chapter 1. Features Accessaries: CD*1 Remote Control*1 Power Supply 12V/3A *1 5 All Rights Reserved Mouse*1 www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Chapter 2. Panel 2.1. Front Panel 2.1.1. 4-CH Front Panel 1 2 3 4 5 7 6 8 Marks 9 10 12 11 13 15 18 19 14 16 17 20 No.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 2.1.2. 8-CH Front Panel 1 2 3 4 5 7 6 8 Marks 9 10 12 11 Functions 13 15 18 19 14 16 17 20 No.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 2.2. Rear Panel 4-CH DVR 8-CH DVR No. 1. 2. Connector Video input Video output Functions 4CH:Connect CH1-4 video input device(BNC) 8CH:Connect CH1-8 video input device(BNC) Connect monitor output (BNC) Audio Input 4CH DVR: 4CH audio input (RCA) 8CH DVR: 4CH audio input (RCA) Audio Output 4CH DVR: 2CH output(RCA) 8CH DVR: 2CH output(RCA) 5. Ethernet Connect LAN, Ethernet (RJ45) 6.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 2.3.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Virtual Keyboard (Remote Control) *Press “SEL” button to enter the column. *Press “SEL” button again to call out the virtual keyboard. 10 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Chapter 3. Installation 3.1. Installation(Hard Drive) DO NOT install or remove hard drive while DVR is running! Step 1. Loosen the screws in the left and right sides. Step 2. Remove the cover by pushing back and lift it up, slightly. Step 3. Connect SATA to H.D.D. (data cord and power cable). 11 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 4. Install HDD on the bracket, fixed with screws firmly. Step 5. Check if the connectors are properly connected and there is no loosen cables, and then install cover as well as screws . 3.2. Camera and Monitor Connection Connect camera cable to video input of DVR, and from video output of DVR to Monitor via BNC connector or if the camera is a PTZ speed dome, you could connect RS485 connector. 3.3.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 3.4. Connection Diagram: 13 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Chapter 4. OSD Display 4.1. Structure of OSD Display(4CH) 14 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 4.1.1. Structure of OSD Display(8CH) 15 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 4.2. The Symbol of Main Screen(Recording Alarm) The symbol will display in main screen: Symbol/icon Functions Motion HDD loss, HDD space full The video is recording Video Loss Video Loss When DVR is in recording mode, [ ] icon or [ ] icon will appear on the screen. But when there is [ ] icons on the screen it indicates a motion alarm was triggered.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 4.3. Pop-out menu options 4.3.1. Menu Lock For your system security, the system has a special function to protect your OSD operation. Step 1. Enable Password and key-in password/user name from system. Step2. Click” Lock” button, and then the OSD was locked. 17 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 4.3.2. Split Windows (For 8 CH Only) There are 3 modes of split windows: 1. CH 1-4 2. CH 5-8 3. CH 1-8 4.3.3. PTZ Control 18 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL All Functions Pointer Auto Pan To select the direction of PTZ. The middle circle is for auto pan of PTZ. Zoom in/zoom out Focus Iris Speed Channel select EXIT GOTO PRESET POINT SET For selecting the channels of PTZ camera. To back to previous page or exit. Allow you to go to a specific preset point. Allow you set a set of specific preset points of a PTZ camera.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 4.3.3.1. Cruise(PTZ) This function allows to start cruise of PTZ camera. 4.3.4. PIP Mode 20 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 4.3.5. Search You could enter into [Record Search] menu from Pop-up menu conveniently and quickly and search/playback the record histories. For more information of record search , please refer to section 4.7. 4.3.6. Record(Manual) START MANUAL RECORD STOP MANUAL RECORD 21 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 4.3.7. Start Rotate(SEQ/CHANNEL AUTO SWITCHING) This function allows you to switch channels, automatically. 4.3.8. GUI output selection This function allows you to select the GUI output between 2 monitors (VGA or BNC). 22 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 4.4. Main Menu Setup(Display) You can set up whether each channel can be previewed or not under Live display and/or record mode, enable live time or not under live screen and set up record time or not on the record history. Also, you can key-in the title for each channel. You can adjust image brightness, saturation, contrast and hue parameters of each channel after entering into [Color] menu. Step 1.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 4.5. Main Menu Setup(Record) 24 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL All Functions Record setup Allows you set up record status (Enable/Disable) of each channel. Quality Included 3 options – Best, Good and Normal. Frame rate setup Included 2 options – Fixed and Manual. Click on 【Manual】 】 option and then click [Frame rate setup] button, you are able to set the frame rate for each channel. Audio Allows you turn audio on/off.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Copy the setting to all channels or one specified channel. Click ”Apply” button to save changed. Frame rate setup In this option, you can set the recording frame rate, if the frame rate which you set over system limitation, the system will inform you that your frame rate can’t be accepted. Copy the setting to all channels or one specified channel. The information as below: 26 All Rights Reserved www.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 4.6. Main Menu Setup(Network) 27 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Internet Type Port for DVR connection Http port 28 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Description: Because of DVR can support viewing the video via network remotely, hence you can control the DVR remotely, including, monitoring, recording, playing back or making backup. There are 4 types of network setup in DVR: DHCP PPPoE Static IP DDNS(Dynamic DNS) All Functions The Dynamic Host Configuration Protocol (DHCP) is an auto configuration protocol used on IP networks.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Port Forwarding guide: To access the DVR from a remote site, you need to forward ports 80 and 9000 from the router which is connected to DVR. Step 1. Step 2. Step 3. Connect router to DVR and power on DVR. Go to website: http://portforward.com/kguard/ Click on ” KGuard KG-SHA DVRs (for DVRs that start with KG-SHA) ” Step 4. Click on the model of router which connected to your DVR.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 5. Click on “click here to skip this advertisement” in order to get the free instruction of port forwarding (In the upper corner of the screen). After you enter into advertisement page please click on: When you go to the website: www.portforward.com, you will see an advertisement for setup port forwarding of router. You DO NOT need to purchase this software.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 6. After you finished port forwarding process, you can check the port to see if it is open or not. Step 7. Go to website: http://www.canyouseeme.org/ Step 8. Step 9. key-in the port number which you just forwarded. *For example: port 80. Click on button to see if the port is open or not. 32 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL *If you forwarded the port succeed , the web page will display: Open port success *If you forwarded the port failed , the web page will display: Open port failed If you cannot use the default HTTP port 80 or 9000, due to the reason of port was occupied by other program, or it is being blocked by your service provider, you can use another port instead of.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 4.7. Main Menu Setup(Search/Playback) *Click “Search” button first. *Double click the specified date & time which you need to playback and then click ”playback” button. *Click”Detail Files” *Playback image 34 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL *Choose the type of video and then check the file which you would like to backup. *Insert U.S.B device and then click”Backup” button. 35 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 4.7.1. Main Menu Setup(Search/Log/Export) *You can export the video information from log(by text). *Click on ”log” button to search the video information. 36 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL *Click on “search” button and specified the log type in order to search the video information. *Click on “Export” button to export video information. *Before performing Export, please insert U.S.B Device. 37 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL All Functions Channel Allows you select the channel(s) you would like to search. Time Search In the Video Search screen, user can search for a specific date and time for a recording and view it in Playback mode. This is useful for hunting a specific recording of an incident if you know the date and time it occurred.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 4.8. Main Menu Setup (Device Management) 4.8.1. H.D.D & ALARM Setup 39 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL HDD Management When DVR is connected to a HDD, the system will detect H.D.D automatically, when the new H.D.D was installed , system will ask for H.D.D formatting. The functions of” H.D.D Setup” NO: :The number of HDD TOTAL SPACE: The capacity of Hard Drive or free space on the Hard Drive.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Alarm Setup The functions of” Alarm Setup” Channel: the option allows you select one channel you want. HDD Loss: When the “Buzzer” is in the “ON” position and the system can’t find the HDD or HDD is not be formatted, the symbol “ ” will appear on the screen with buzzer sounded. HDD Space: When the “Buzzer” is in the “ON” position and the HDD out of storage space, the buzzer will be activated.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL If the Buzzer is set to “OFF” position, the buzzer will not be activated. Video Loss: When setting [Buzzer] to ON and when a camera has been disconnected. “Video Loss” symbol will also appear on the screen with buzzer sound. Set to OFF, you will only see the “Video Loss” appear but no sound.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 4.8.2. Email Alarm Notification Because of the type and the ISP service company is variety worldwide, Hence, we only provide 1-2 company for an example, if you have any question of E-mail, please contact your local ISP service. Please make sure your DVR already connected to internet: E-mail must enable. If your E-mail have SSL encryption, you have to enable it. The port for sending E-mail.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Functions Email SSL Enable: Open Enable:Open Disable: Close Disable: Close SSL is a security link transport protocol. You can encrypt your communication info (including your email) using SSL to prevent hackers from monitoring your email or communication info and even your password. Please confirm with your email service provider if your email server support SSL or not.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 3. Click ”Device” icon, alarm icon will pop-out. Step 4. Click ”Alarm” icon. Step 5. Check the “EMAIL” block, and then click ”EMAIL SETUP” button. 45 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 6. Step 7. Select ”Enable” for SSL, if your E-mail server needs the SSL verification. Select ”Disable” for SSL, if your E-mail server doesn’t need the SSL verification。 Key-in the “SMTP Port” for the sender. *For example: the default value of Gmail SMTP Port is 465, and the others is 25. If you use Gmail, you can key-in 465. *In the email setting, we all take the Gmail for example. Step 8. Step 9.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 13. Click “Motion” icon, and make sure motion detection is enabled. Motion Area *Before setting Gmail , please setup the motion area. 【Red: enable】;【blank: disable】 *If you don’t use Gmail, please skip this step. 47 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 14. Login Gmail and go to “Settings forwarding and POP/IMAP Enable IMAP”. This step is for Gmail only. Step 15. Now, check your e-mail and see if you receive an e-mail (along with attached Photo) from DVR. 48 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 4.9. PTZ & Mobile Setup Click Click 49 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL PTZ Setup The functions of” PTZ Setup” PTZ protocol (Pelco-D or Pelco-P) Baud Rate (1200, 2400, 4800, 9600), Data bit (8, 7, 6, 5), Stop bit (1, 2), Parity (None, Odd, Even, Mark, Space), Address Code Cruise *PTZ device can be activated only when a channel in connection with the PTZ camera is selected. Mobile Setup 50 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL The functions of” Mobile Setup” User Name: indicate user name of DVR. User password: indicate user password of DVR Server port: Mobile monitoring port. Setting range is between 1024 and 65535. Explanation: Please connect DVR to Internet before setting DVR port number and the server port number is not equal to network menus. The user name and password you enter can not be empty.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 4.10. Motion Detection Setup 52 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Motion Detection Setup The [Motion detection] Menu has three sections, including Channel Status, Sensitivity and Motion area. The functions of” Motion Detection Setup” Channel : This option allow you enable motion detection on any channel. SENSITIVITY: This option allows you to set sensitivity level of motion detection from higher to low with 8 being the most sensitive.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 4.11. Main Menu Setup 【System/Privacy Zone/Time/Password/Video/Language/Maintain】 】 The “System” Menu includes: Time Setup, User Password, Audio/Video Setting, Language select, System Info. , Privacy zone and System Maintenance. After entering into the “System” menu, you can configure the relative parameters to meet your needs. *The OSD switching between VGA and BNC is in the section of Audio/video setting.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL TIME/DATE NTP UPDATE BUTTON DST SETUP BUTTON DST SETUP BY WEEK/DATE 55 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL You can modify the system date, time, date/time format, and time zone, DST (day time saving) status and NTP. There are 2 types of DST which you can setup. 1. Setup by week 2. Setup by date Click ”Apply” button to save the settings. Password This option allows you set the device ID for the DVR and set the system password and authority. The new passwords will be available after clicking “APPLY” button.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Video/Audio Setup 57 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Video System: allow you set Camera system (PAL, NTSC). VGA Resolution: include 4 options - 1280×1024、1024×768、800×600 and 1440×900. Rotate time: :allow you select sequence time between from 5s and 300s. OSD Output: Allow you to select the video output between VGA /BNC/AUTO. The default main menu options is on VGA output.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Click the [Volume] and/or [Margin] options on the right-bottom corner of the Video/Audio screen to adjust the volume and/or margin respectively. Privacy Zone *The total area of privacy zone is 4 areas. Step 1. Right Click ”Main menu” option. Step 4. Click on”Privacy Zone”. Step 2. Click on”system” icon. Step 5. Check the area which you need. Step 3. Click on”Video” icon. Step 6.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Language Enter into [Language] menu to select the language you want to use on the DVR and then click [APPLY] button. The selection will be available after system Auto restarts. 60 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL System Information Enter into [System Information] menu to view system info, including Device type, Software (firmware) version, IE version and MAC address etc. When connecting multiple DVR to the same local area network environment, you need to change MAC address for each DVR respectively; otherwise, you may not connect these DVR to network.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL *There are 4 functions: : *After enabling ”Auto Maintain” function , the system will perform regular maintenance depend on your need. Please note the [Auto Maintain] function will be available only when DVR is on the Main interface and have no user online. *After completed “Auto Reboot “setup, the system will auto reboot according to the setting.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL : After entering into this system , you can select the item which you need to reset to factory default. 63 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Chapter 5. Network Access(Remote) There are 2 methods to remote access the DVR via network: Internet Explorer Browser (IE),and Mobile phones. 5.1. IE Setup 5.2. Web Log-in(IE Browser) 4-CH DVR allow you have 5 users on-line simultaneously.。 8-CH DVR allow you have 3 users on-line simultaneously.。 *The default username is “Admin”. * Default password is empty. 64 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 5.3 Control Panel(Live view) The Control panel Live video connect/disconnect (ON/OFF) Snapshot: Picture Format: *.bmp Record: To record live video remotely Channel display mode: 1 ch/4 ch/8ch/16ch/full screen Volume button Click the [ Click the [ ] icon of one channel to display the image of specified channel. ] icon to start manual record. 65 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL PTZ Control Direction Pointer To move the PTZ to any direction Zoom Focus Iris Zoom in/zoomout;focus adjunstment and Iris control Pan & Tilt Pos Indicates that you can choose the cruise starting point ,as your desire. SET To set the preset point. Clear To delete the preset point. To load the last preset point GoTo Key-in the preset point and click it to load the last preset point which you set.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 5.4. Setup(Remote Setting) 5.4.1. Structure of Remote Setting After completed each setup, you have to click” 67 All Rights Reserved ” to confirm the setting. www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 5.4.2. Display Setup You can setup Channel title/the title position/enable or disable live view/live view time display and record time display. when you see ” ”button, you can copy the setting to the channel which you would like to copy. 4 CH 8 CH 68 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 5.4.3. Record Schedule: This function allows you to setup the record schedule from remote site. Step 1. Select ”Enable” button from “Record” inside the “Record Schedule Setup”. Step 2. Select “Schedule” from “Record Mode”. Step 3. Click button to setup the record mode. 69 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 4. Check the record mode which you would like to setup. There are 3 types of record mode: *【 【Red color: Alarm Record】 】【Green color: Normal record】 】【transparent/white: No record.】 】 【 【 Step 5. Click button to save the setting. 70 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 5.4.4. Alarm Setup You enable or disable the buzzer/motion alarm/HDD Loss alarm/Not enough HDD space alarm/Video Loss alarm/Post recording/Pre-record 5.4.5. Network There are 4 modes of Network setup Static IP/ DHCP PPPoE DDNS Email Setup For setting static IP & DHCP. For setting PPPoE. For setting specified DDNS. To send E-mail for some special event. For all setting, please refer to the information below.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 5.4.5.1. Static IP Step 1. Click ”STATIC & DHCP” option. Step 2. Choose Type ”Static IP & DHCP”, and key in all information, including, IP Address/Media Port/Web Port/Gateway/ Netmask / DNS Server. *Normally, the DVR will have the same information with internet. Step 3. Click button to save settings. 5.4.5.2. DHCP Dynamic Host Configuration Protocol (DHCP).
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 5.4.5.3. PPPoE Point-to-Point Protocol over Ethernet (PPPoE) is a network protocol for encapsulating Point-to-Point Protocol (PPP) frames inside Ethernet frames. By using PPPoE, users can virtually "dial" from one machine to another over an Ethernet network, establish a point to point connection between them and then securely transport data packets over the connection.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 5.4.5.4. DDNS Dynamic DNS is a method, protocol, or network service that provides the capability for a networked device. 1. 2. 3. 4. Click ” DDNS ” option. Set DDNS to “ Enable” Choose the server for DDNS Key-in the information which was provided by ISP service company. 5. Click” “button to confirm settings. *For free DDNS , Please refer to ”Appendix D” 74 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 5.4.5.5. Email Setup If you have any question of E-mail Setting, Please refer to section 4.8.2.(E-mail setup). 1. Click ”Email Setup” Option. 2. Email to “Enable” 3. IF your Email with Email Encryption, you have to set ”SSL” to enable”. 4. key-in SMTP server. 5. key-in the Email address of sender. 6. key-in the Email address of receiver. 7. Set the sending interval for Email 8. Key-in the SMTP port. 9.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 5.4.6. Device (H.D.D/PTZ/Mobile/Motion) In this option, you can view the information of H.D.D. as well as setup PTZ/Mobile/Motion detection. H.D.D. information PTZ Setup Mobile 76 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Motion: Please follow the step , below: Step 1. Step 2. Enable Motion detection: Click “ ”button. Step 3. The motion detection setup block will pop-out and you can click the area which you don’t want to setup. 77 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 5.4.7. System setup(Password/DST) There are 4 options: System Setup User setup DST Information 5.4.7.1. System setup 5.4.7.2. Authority(Password management) You can set 6 users in this setting, if you would like to set the authority for each user, you have to log in the account of Admin. 1. Click ”User” Option. 2. Choose the user which you would like to provide authority (6 users). 3. Set Active to ”Enable”.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 5.4.7.3. DST SETUP Step 1. Click ”DST” option. Step 2. Enable “DST”. Step 3. Choose the offset time . 79 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 4. Choose “Daylight Saving Time Mode”. There are 2 types of DST: 1.Choose by week 2.Choose by date 5.4.7.4. System information 5.5. Local Setting This option allows you set “Record Save Path”, “Snapshot Save Path” and “File Save Path”. 80 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 5.6. Playback(IE Browser): Step 1. Step 2. Click ”Playback” option. Click the date which you would like to playback. Step 3. Also, you can click “ ” button to search the video file again, or use file list to choose which channel you would like to playback, and then click on ” ” button. *The video file list will be displayed. 81 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 4. Click specified video file which you would like to playback, remotely. The video will be displayed. When the video file is playing, the system won’t allow you to download video files. Step 5. Close the playing video and then click Step 6. When the video file was downloaded, the dialogue box will display. button to download video file. 82 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL *And you can check the file path, as below. *Remote manual recording file will be saved to【 【Record save path】 】. *Local recording file will be saved to [File save path]. *Double-click any file listed or highlight any file and click [Play] button to play the selected recording file. *Click [Download] button to download and save selected recording file to specified saving path.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 5.7. Mobile Phones Access The DVR is currently compatible with mobile phones running Windows Mobile, Symbian, iPhone, Blackberry and Android operating system. *Due to the model of mobile phone is variety, so we only provide 1 model for your reference, if you have any question of your mobile phone ,please refer to appendix J.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL USER NAME USER PASSWORD SERVER PORT All Functions The login user name of DVR The login Password of DVR Mobile monitoring port. Setting range is between 1024 and 65535. Please note that the server port of DVR must with the same port of mobile . You also need to forward this port at the virtual server option of your router. 85 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 5.8. Install & Operate (Windows® Mobile Phones) Step 1. Install the webcam program that is included on the supplied CD by Step 2. Click the type of mobile which you need from 5 icons. Step 3. Copying the “Aseesetup.CAB” file into mobile phone. click icon. Step 4. Click “ASeesetup” and choose an installation location ,after the initialization. Step 5.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 6. Step 7. After completed installation, click “ASee” icon to run the program. Key-in the information of DVR and Check box. All Functions User’s Name Indicate that the user name which have been set on DVR-[Mobile Set] menu. Password Indicate that the password which has been set on DVR-[Mobile set] menu.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 8. Now, you can check the list of your connecting information. Step 9. Press button, to enter the main screen and to view the video. 88 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Picture Function key 【Items】 Description 【Channel option】 】 Click button, to select the channel which you would like to view.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 5.9. Install & Operate (Symbian® Phones) Step 1. Install the program that is included on the supplied CD by copying the file to the mobile phone. “ASee_AL_3rd _0723.sisx”(3RD EDITION) or “See_AL_5th_0723.sisx”(5TH EDITION) *Click “Mobile” and then choose the software which you need.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 3. Choose Mobile card or SD card as an installation location. Step 4. Click “Continue” button to make sure the application program you installed may visit network or dial phone when popping-up the dialog box. Step 5. After successful installation system will prompt you “Installation Complete”. 91 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 6. If the program is installed into SD card, please enter into ”Application” menu to find “Mobile Viewer” icon. Step 7.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 8. For first time using or Need some change on the Parameters, click the[Setup]button, you will enter into the window. Click [Play] button to enter into live display. Default Access point:Allow you select network type based on your mobile net environment. Server address: herein indicate public IP address connected to DVR or dynamic domain name used by DVR.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 5.10. Install & Operate (iPhone®) (A)Download iTunes Step 1. Visit Apple website http://www.apple.com/itunes/ to download & install the iTunes. Step 2. After download the file of iTunes , click ” ” icon to install it. Step 3. After finished installation of iTunes, click ” ”icon or system will enter the login page ,automatically. Step 4.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 5. Step 6. Step 7. The login page will display. Click ”STORE iTunes Store” option. Click on “Store Create Account” to create your own account. Click ”Continue” button to proceed next step. 95 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 8. Check the term and conditions, and then click ”Continue” button. Step 9. Create your personal account and fill out all information which was requested by system. After fill-out all information . Click ”Continue” button to proceed next step. Step 10. Fill in your personal info & click “Continue” button.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 11. Finished the register, and go to your email box to verify your account. Step 12. Click the link included in the email message. It will connect to the iTunes store and turn to iTunes interface. Step13. Sign in your account. The register of your iTunes store account has been done. 97 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 14. Click and then Key-in the characters “ASee” in the” search” column . For connecting cable, please contact your local i-Phone service. Or go to i-phone website for support : http://www.apple.com/support/iphone/ Step 15. Download and install the “ASee” program to your mobile by connecting cable. Step 16. After finishing installation, “ ASee” icon will be displayed to mobile phone interface.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 17. Click , “ ASee” icon to enter the main screen, as below: Functions 1 Channels select. 2 PTZ Lens control (Area Selection(ZOOM+、ZOOM-), Aperture(I+,I -), Focus(focus +, focus-)) PTZ Direction ( left, right, up, down) 3 4 Function buttons from left to right in turn are: Pause, Full-screen, Snapshot, setup, help and Access setup.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 19. Click “ ” button, to back to main screen. Step 20. Click “Play & Pause ” button, to view videos, remotely . 100 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 5.11. Installation & Operation (Blackberry Mobile) 5.11.1. Installation Step 1. Download and Install the Blackberry Desktop Manager on the computer. Step 2. Connect your Mobile to your PC via USB cable. Step 3. Open the Desktop Manager. Step 4. Choose ‘Application Loader’ from the Main Menu. Step 5. Click “Start” Button on the ”Add/Remove application” menu. 101 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 6. Click “Browse” button and check the “ASee.alx” file. Step 7. Click “Finish” button to finish the installation. 102 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 5.11.2. Setup & Operation Step 1. The Blackberry viewer will be installed to the “Downloads” directory. Step 2. Enter into the “Downloads” directory, and then click the “ASee’ icon. Step 3. Enter into the below interface. 1 ---Connect/disconnect 2 ---Full screen 3 ---Snapshot 4 ---Setup 5 ---Help 6 ---Next page 7 ---PTZ Control Step 4.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 5. Select the Network Type supported by Blackberry phone. Step 6. Click “ Step 7. Click “ ” button to save the setting. Next Page’ icon to search “Channel” option, and then choose the channel which you would like to display. 104 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 8. Click “ play’ icon to view video. Step 9. Click “Full screen” icon to enter into full screen display mode, again click the “Trackball” button of mobile to quit the full screen mode. Step 10. Click “ Next page” button to find the “PTZ Control” icon and enter into the mode. Now you could freely control your PTZ camera through your Mobile phone. 105 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 11. Click “Close” button to exit the program . For further information just click “Help” button to view the software’s Help instruction. if your mobile had connect to other DVR, you can delete it , as below. Step 1. Click the “ ” button to enter into the History List. Step 2. Highlight one record and click “Enter” button to enter into pop up menu.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 3. When selecting “Edit” option, system will allow you edit the history record. Step 4. When selecting “Delete” option, the history record will be deleted. 107 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 5.12. Android Mobile *Please make sure that the software is compatible with your Android Mobile. Step 1. Make sure your mobile have been connected to network and could download the software. Step 2. Enter into “Program” option and highlight “E-market” icon . Step 3. Enter into the “E-market” interface . Step 4.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 5. Highlight and install the program which was searched by system. Step 6. Proceeding to the next step for installation. Step 7. Enter into “Program” file and click “ ApkInstaller” icon. 109 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 8. Find the “ASee.apk” file you would like to install. Step 9. Click the software to install to your phone. Step 10. Enter into “Program” option to click “ ASee” icon . 110 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 11. Step 12. Enter into “ASee” main screen. 1 PTZ Direction 2 Zoom+ - 3 Aperture 4 Focus+ - 5 CH Selection 6 Play & Pause 7 Full/Normal Screen 8 Snapshot 9 Setup 10 CH change 11 Help Click “Setup” button(9), to set the “Device info”.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 13. Click “ ” button, to back to previous page. Step 14. Click “Play & Pause ” button, to view videos , remotely. When your DVR is connecting internet through router, you need to forward the port at the virtual server option of your router. For more information, please refer to Appendix (mobile) in this section, as below: 112 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Forwarding the port of Router for Mobile phone Step 1. Setup the IP address and port of DHCP(3),and the click on ”Apply” to confirm settings. *The DHCP setting is for your reference only, there are 2 types of different internet PPPoE & Static IP. 113 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 2. Click “Device” icon and then click “Mobile” icon. 114 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 3. key-in the user name and password as well as server port. *The port the mobile must the same as server port. Step 4. Click ”Apply” button. For customized support instructions of port forwarding ,due to the model of router is variety, please go to website: http://portforward.com/english/applications/port_forwarding/KGuard_KG-SHA_DVRs/KGuard_KG-SHA_DVRsindex.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Chapter 6. Specifications Model Video Compression Video System Operation System Video Input / Output Audio Input / Output Audio Compression Display Frame Rate Playback Resolution Recording Frame Rate Recording Mode Recording Pack Time HDD Interface Network Interface Network Protocol Network Function USB 2.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Kuwait, Riyadh, Nairobi GMT + 03:00 Moscow, St.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Appendix B – Play Back Utility Installation (Utility Software/Applications ) Step1. Step2. Insert the Installation CD into the CD-ROM. Execute ‘’Autorun.exe’’. and then click on ‘’Utility’’ button. *If your computer can’t execute the CD automatically, please click” ,finally click on “ ”(MY computer) and then click ” icon to execute it. 119 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 3. Click icon to install playback file. Step 4. The system will display the following setup procedure: Step 5. Click button to proceed to install playback software. 120 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 6. Click” Or you can click ” button to proceed to the installation process. button to change to file folder. 121 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 7. After completed installation, Check ” ” box, and then click button. *The Playback main screen will display. 122 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Playback Player Select the playback file you desired from the files. Please select the file with *.264 format or *.nvr. The record file backed-up by U.S.B Device or removable disk is with *.264 format, and DVD Recorder with *.nvr format. Play & Review Backup File Double click the record event at the right side of screen to start record file playback. 123 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL The button functions from left to right in turn are as follows: All Functions Button Functions Start playing record file Play Pause the record file playback Pause Stop the record file playback Stop Rewind Rewind playing the record file at X2, X4, X8 and X16 speeds. Forward Forward playing the record file at X2, X4, X8 and X16 speeds. Play the record file frame by frame.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Appendix D- Applying Free DDNS Host from Kguard Step 1. Step 2. Go to our website: http://global.kguardsecurity.com/main/index.aspx?flag=1 Click on If your IE browser was blocked ,please go to web site: http://kguard.org/ Step 3. The pop-up menu will display. 125 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 4. Key-in the information, below. Key-in your E-mail address. Setup your own password. Reconfirm your password Key-in your first name Key-in your last name Key-in authentic code For junk mail block, we highly recommended you to avoid use free E-mail, for example, Gmail , yahoo mail…。 Step 5. Step 6. Click on button. Define your own domain name. 126 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 7. After complete applying process , the status will display “check” symbol in green, and also display your domain name. *Please remind or write down this domain name. 127 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Appendix E- Applying free DDNS from internet Step 1. Please go to http://www.dyndns.com and Click “Get a free Domain name” button. Step 2. Click “Sign up free” icon. Step3. Choose free sign up Step 4. Click ” Renew Services” option, in order to create new account. 128 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 5. Create your own username, password, E-mail and enter the image numbers to create an account Step 6. After you created your account, the company will sent an e-mail to verify your e-mail account Step 7. Check your e-mail and see if you have received an e-mail from DynDNS. Click on the link in the e-mail to complete the verification. 129 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 8. Now, go to http://www.dyndns.com and log in your username and password. Step 9. Click ”MY Account” “My Hosts” option. Step 10. key-in your hostname, IP address and then click “Add To Cart”. 130 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 11. Click “Next” button. 131 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 12. Click “Activate Services” Step 13. When activation is successful, the webpage will display the message: Step 14. Click on ”Network” icon. 132 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Step 15. Step 16. Step 17. Step 18. Step 19. Step 20. Enable the DDNS Choose the DDNS Server Type Fill out the Hostname(you just applied) Fill out the Username(you just applied) Fill out the Password(you just applied) Click “Apply” button to Confirm the settings. 133 All Rights Reserved www.kguardsecurity.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Appendix G- FAQ Troubleshooting 1. Q: What can I do if the system does not detect the HDD? A: Check the data and power cables and make sure they are securely connected. B: For new H.D.D, you have to format it first. C: Make sure that the power of adaptor is correct, 12V/3A. 2.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL A: The reason is the OCX of IE Browser which memorized other version IE interface, so your IE browser was conflict with other version. There’s the solution: 1. Insert included CD into CD-ROM, and then click on” Remove OCX Tool” icon, and you will find the file ”RM_SHA_OCX”. Then close the IE browser and click it. For further information and update information of FAQ, please go to website: http://global.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL Appendix J- 3G Mobile Phone Local Service Center Brand 3G Cell phone Support Suggestion Service Center(Web site) Blackberry http://na.blackberry.com/eng/support/ http://uk.blackberry.com/support/ http://fr.blackberry.com/support/ http://sa.blackberry.com/support/ Nokia http://europe.nokia.com/support http://www.nokia.ca/get-support-and-software http://www.nokiausa.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL GARMIN GOOGLE BlackBerry Android Android Garminfone Nexus One BlackBerry 8900/ BlackBerry 9000 Bold/ BlackBerry 9100 Pearl BlackBerry (9105 Pearl) /BlackBerry 9630 Tour /BlackBerry 9650 Tour2 /BlackBerry 9700 Onyx (Bold, 9020)/8900/8910/8980/9000/9630/9650/9700/9780/9800 i-Phone SIEMENS i-Phone Windows Apple iPhone 3G/3GS (OS 3.0 or later) Apple iPhone 4 / iPod touch, iPad SX66 Mobile Appendix L –H.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL ST3500320SV 500GB 32M ST3750330SV 750GB 32M ST31000340SV 1TB 32M SV35.4 ST3320410SV 320GB 16M SV35.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL WD3200AAJS 320GB 8M WD5000AADS 500GB 32M WD10EADS 1TB 32M WD RE4-GP WD2002FYPS 2TB 64M Brand(Hitachi) Model WD Caviar Green Capacity(GB) Cache(M) ) HDT721032SLA360 320GB 16M HDT725032VLA380 320GB 8M HDS721010KLA330 1TB 32M CinemaSta HCT721075SLA380 750GB 8M Brand(SAMSUNG) Model Capacity(GB) Cache(M) ) HD502HI 500GB 16M HD103SI 1TB 32M 142 All Rights Reserved www.
KKGGUUAARRDD SSTTAANNDDAALLOONNEE DDVVRRSSHHAA--110044..VV22//110088..VV22 UUSSEERR M MAANNUUAALL 143 2011/08/08 All Rights Reserved www.kguardsecurity.