Programming instructions

LD-14304-4
【Note3】R/L=High､U/D=Low R/L=Low､U/D=Low
Please do not use this terminal by “open”.
【Note4】R/L=High､U/D=High R/L=Low､U/D=High
Please do not use this terminal by “open”.
4-2. Backlight driving
Connector name :CN2、CN3 Used connector : BHR-03VS-1(JST)
Corresponding connector :SM02(8.0)B-BHS(JST)
Pin no. Symbol Function Cable color
1
Ｖ
HIGH
Power supply for lamp (High voltage side) Pink
2 NC This is electrically opened.
3
Ｖ
LOW
Power supply for lamp (Low voltage side) White
5. Absolute Maximum Ratings
Parameter Symbol Condition Ratings Unit Remark
Input voltage
V
I
Ta=25℃－0.3 ～ +5.5 Ｖ【Note1】
+5V supply voltage Vcc
Ta=25℃ 0 ～ ＋ 6 Ｖ
Storage temperature Tstg
－ -35～70 ℃
Operating temperature (Ambient) Topa
－ -10～65 ℃【Note2】
【Note1】CK,R0～R5,G0～G5,B0～B5,Hsync,Vsync,ENAB, R/L, U/L
【Note2】Humidity：95%RH Max. at Ta≦50℃.
Maximum wet-bulb temperature at 39℃ or less at Ta>50℃.（ No condensation.）
【Note3】Humidity：95%RH Max. at Ta≦40℃.
Maximum wet-bulb temperature at 39℃ or less at Ta>40℃.（ No condensation.）
05-Oct-2005