Programming instructions

72/245/EEC AS LAST AMENDED BY 95/54/EC
3
APPENDIX
to EEC Type Approval Certificate No: e11*72/245*95/54*3560*00
concerning the type approval of an electric/electronic sub-assembly with
regard to Directive 72/245/EEC as last amended by Directive 95/54/EC
1. Additional information:
1.1 Electrical system rated voltage: Plug in either 12V or 24V battery
1.2 This ESA can be used on any vehicle type with the following restrictions: To be fitted to commercial
vehicles with a system voltage within 1.1 above, negative earth
1.2.1 Installation conditions, if any: See manufacturer’s instructions
1.3 This ESA can only be used on the following vehicle types: Not applicable
1.3.1 Installation conditions, if any: Not applicable
1.4 The specific test method(s) used and the frequency ranges covered to determine immunity were: Not
applicable
1.5 Approved/recognised laboratory (for the purpose of this Directive) responsible for carrying out the test:
RFI Global Services Ltd
5. Remarks: None
* Delete as applicable
(1)
If the means of identification of type contains characters not relevant to describe the vehicle,
component or separate technical unit types covered by this information document/type-approval
certificate, such characters shall be represented in the documentation by the symbol `?' (e.g.
ABC??123??).
(2)
As defined in Annex II A to Directive 70/156/EEC.
05-Oct-2005