Programming instructions

ECE REGULATION NO: 10.02 STU

Appendix to Type Approval Communication Certificate No: 10R-023560

concerning the type approval of an electrical/electronic sub-assembly under Regulation No: 10

1. Additional information

1.1. Electrical system rated voltage: Plug in either 12V or 24V battery, negative ground

1.2 This ESA can be used on any vehicle type with the following restrictions: To be fitted to commercial

vehicles with a system voltage within 1.1 above, negative earth

1.2.1 Installation conditions, if any: See manufacturer’s instructions

1.3 This ESA can be used only on the following vehicle types: Not applicable

1.3.1 Installation conditions, if any: Not applicable

1.4 The specific test method(s) used and the frequency ranges covered to determine immunity were:

(Please specify precise method used from Annex 9): Not applicable

1.5 Approved/accredited laboratory (for the purpose of this Regulation) responsible for carrying out the test:

RFI Global Services Limited

2. Remarks: None

(1)

Delete where inapplicable

05-Oct-2005