Programming instructions

1. This ESA shall be approved as a Component / STU.
Component
2. Any restrictions of use and conditions for fitting:
The restrictions for use as regards this application are the test configuration used during the
test. Any deviation from this configuration may compromise the EMC performance of the
system.
Appendix 1
The ESA chosen to represent the type: Vehicle Mount Terminal 8530
Further details about the equipment under test, accessories, support equipment and
interconnection cables are provided in RFI test report serial number
RFI/EMCE1/RP47590JD01A, which is enclosed in Appendix 2 of this document.
This Appendix (Appendix 1) contains the following:-
Documentation Supplied By The Manufacturer
1. BOM
2. Circuit Diagram
3. Circuit Layouts
4. Display Manual
These pages are not included in the total number of pages for this document.
05-Oct-2005