Installation Guide
Test the ADT Carbon Monoxide Alarm weekly by pressing
and holding the test button for a few seconds while the
ADT Security Hub is in Walk Test Mode. See the ADT
Security Hub User Guide for more details.
practitioner. Individuals with medical problems may
consider using warning devices which provide audible
and visual signals for carbon monoxide concentrations
under 30 ppm.
Replace the alarm when the “Replace unit by” date has
been reached (check label on the side of the device).
Important: This carbon monoxide alarm must be tested
and maintained weekly. This device is designed to protect
individuals from the acute effects of carbon monoxide
exposure. It will not fully safeguard individuals with
specic medical conditions. If in doubt, consult a medical
D
Testing
Note: If you have an ADT professional monitoring service
activated, additional testing is required when you connect
new devices. Follow the on-screen instructions in the
SmartThings app to complete testing.
Testing