Upgrade guide


NX Series Firmware Upgrade guide

1. Before upgrading the firmware
●Makesureyouusefullychargedbatteries.
Ifcameramalfunctioniscausedduringafirmwareupgradeforthereasonsgivenabove,themainboard
mayhavetobeservicedbyaSamsungservicecentre,whichmayresultinmajorrepaircharges.
●Beforeupgradingthefirmware,makesurethatyouformatthememorycardonyourPCorcameraand
thendownloadthenecessaryfirmwarefile.
●Downloadthefirmwarefileintotherootdirectoryofthememorycard.
●Donotoperatethecamera,removethebatteries,orcutthepowerwhileupgradingfirmware.Operatethe
cameraonlyafterthefirmwareupgradeiscomplete.
2. Version information of NX series latest Firmware
●NX5:1.21
●NX10:1.31
●NX11:1.11
●NX100:1.12

3. Improvement (Same as NX5/NX10/NX11/NX100)
●CompatiblewithSamsungNewLens60mm&85mmwhouseSamsungNX5/NX10/NX11/NX100cameras.
4. How to upgrade firmware? (This manual had been made based on NX11 camera)
1) Download the firmware file into the root directory of the SD memory card.
2) Insert the SD card on which the firmware file is to be saved.
3) Press the menu button.
4) Move to "Setup Menu 3" (Press the left button of 4-wat key.)
5) Select the "Firmware Update"
(After pressing the left button of 4-way key, press the OK button for 1 time.)
6) Select the "Body Firmware". (Press the OK button for 1 time)
 7) Select "Yes". (After pressing the down button of 4-way key, press the OK button for 1 time.)