Camera User Guide • Make sure you read this guide, including the “Safety Precautions” section, before using the camera. • Reading this guide will help you learn to use the camera properly. • Store this guide safely so that you can use it in the future. Switching Between Pages Click buttons on the top of the screen. ç Contents : return to the Contents. ç Chapter Contents : return to the Chapter Contents page. ENGLISH ©CANON INC.
ç Contents Package Contents Before use, make sure the following items are included in the package. If anything is missing, contact your camera retailer. Battery Pack NB-11L Camera Battery Charger CB-2LF/CB-2LFE Warranty Card Wrist Strap WS-800 ELPH 130 IS Getting Started IXUS 140 ELPH 120 IS DIGITAL CAMERA Solution Disk* (CD-ROM) IXUS 135 Interface Cable IFC-400PCU * Contains software and PDF manuals (= 35). • A memory card is not included (= 3).
ç Contents Compatible Memory Cards The following memory cards (sold separately) can be used, regardless of capacity. • SD memory cards* • SDHC memory cards* • SDXC memory cards* * Cards conforming to SD standards. However, not all memory cards have been verified to work with the camera.
ç Contents 4 Preliminary Notes and Legal Information • Take and review some test shots initially to make sure the images were recorded correctly. Please note that Canon Inc., its subsidiaries and affiliates, and its distributors are not liable for any consequential damages arising from any malfunction of a camera or accessory, including memory cards, that result in the failure of an image to be recorded or to be recorded in a way that is machine readable.
ç Contents Part Names and Conventions in This Guide Zoom lever Shooting: / Playback: / Lens Speaker Shutter button Lamp Power button Microphone Flash ELPH 130 IS IXUS 140 ELPH 120 IS IXUS 135 Wi-Fi antenna area Tripod socket Memory card/battery cover DC coupler cable port Strap mount
ç Contents Screen (LCD monitor) <1 (Playback)> button Movie button Mode switch AV OUT (Audio/video output) / DIGITAL terminal Indicator button ELPH 130 IS IXUS 140 ELPH 120 IS IXUS 135 / (Wi-Fi)> / Up button < ELPH 115 IS IXUS 132 / Up button / Left button FUNC./SET button / Right button / Down button • Instructions in this guide apply to the camera under default settings.
ç Contents 7 • The following icons are used to indicate functions that differ depending on the camera model: ELPH 130 IS IXUS 140 : Functions and precautions for the PowerShot ELPH 130 IS/IXUS 140 only ELPH 120 IS IXUS 135 : Functions and precautions for the PowerShot ELPH 120 IS/IXUS 135 only ELPH 115 IS IXUS 132 : Functions and precautions for the PowerShot ELPH 115 IS/IXUS 132 only • This guide uses PowerShot ELPH 130 IS/IXUS 140 illustrations and screenshots for all explanations.
ç Contents Table of Contents Package Contents..................2 Compatible Memory Cards.....3 Preliminary Notes and Legal Information..................................4 Part Names and Conventions in This Guide......5 Table of Contents....................8 Contents: Basic Operations...10 Safety Precautions................12 2 Basic Guide............... 17 3 Initial Preparations................18 Trying the Camera Out.........29 Software, PDF Manuals (on the included CD-ROM)...35 Downloadable Software..
ç Contents 5 Playback Mode........... 147 Viewing...............................148 Browsing and Filtering Images................................154 Image Viewing Options.......157 Protecting Images...............163 Erasing Images...................168 Rotating Images..................173 Image Categories...............176 Editing Still Images.............178 Editing Movies....................186 6 Wi-Fi Functions.......... 189 What You Can Do With Wi-Fi...................................
ç Contents Contents: Basic Operations 4 Shoot zz Use camera-determined settings (Auto Mode)......................
ç Contents zz Focus on faces......................................................... 68, 98, 135 zz Without using the flash (Flash Off)......................................... 82 zz Include yourself in the shot (Self-Timer)......................... 79, 114 zz Add a date stamp................................................................... 83 1 View zz View images (Playback Mode)............................................. 148 zz Automatic playback (Slideshow)............................
ç Contents Safety Precautions 12 • Before using the product, please ensure that you read the safety precautions described below. Always ensure that the product is used correctly. • The safety precautions noted on the following pages are intended to prevent injuries to yourself and other persons, or damage to the equipment. • Be sure to also check the guides included with any separately sold accessories you use. Warning Denotes the possibility of serious injury or death.
ç Contents 13 • Do not allow liquids or foreign objects to enter the camera. This could result in electrical shock or fire. If liquids or foreign objects come into contact with the camera interior, immediately turn the camera off and remove the battery. If the battery charger becomes wet, unplug it from the outlet and consult your camera retailer or a Canon Customer Support Help Desk. • Use only the recommended battery. • Do not place the battery near or in direct flame.
ç Contents ELPH 130 IS IXUS 140 ELPH 120 IS IXUS 135 • Do not play the supplied CD-ROM(s) in any CD player that does not support data CD-ROMs. It is possible to suffer hearing loss from listening with headphones to the loud sounds of a CD-ROM played on an audio CD player (music player). Additionally, this could damage the speakers. Caution Denotes the possibility of injury.
ç Contents 15 ` Caution Denotes the possibility of damage to the equipment. • Do not aim the camera at bright light sources (such as the sun on a clear day). Doing so may damage the image sensor. • When using the camera on a beach or at a windy location, be careful not to allow dust or sand to enter the camera. This may cause the product to malfunction. • In regular use, small amounts of smoke may be emitted from the flash.
ç Contents • Do not sit down with the camera in your pocket. Doing so may cause malfunctions or damage the screen. • When putting the camera in your bag, ensure that hard objects do not come into contact with the screen. • Do not attach any hard objects to the camera. Doing so may cause malfunctions or damage the screen.
ç Contents Basic Guide Gives basic instructions, from initial preparations to shooting, playback, and saving on a computer Initial Preparations..............18 Trying the Camera Out........29 Software, PDF Manuals (on the included CD-ROM).............................35 Downloadable Software......45 System Map.........................
ç Chapter Contents ç Contents Initial Preparations 18 Prepare for shooting as follows. Attaching the Strap zz Thread the end of the strap through the strap hole ( ), and then pull the other end of the strap through the loop on the threaded end ( ). Holding the Camera zz Place the strap around your wrist. zz When shooting, keep your arms close to your body and hold the camera securely to prevent it from moving. Do not rest your fingers on the flash.
ç Chapter Contents ç Contents 19 Charging the Battery Before use, charge the battery with the included charger. Be sure to charge the battery initially, because the camera is not sold with the battery charged. 1 Insert the battery. zz After aligning the o marks on the battery and charger, insert the battery by pushing it in ( ) and down ( ). 2 Charge the battery. zz CB-2LF: Flip out the plug CB-2LF CB-2LFE ( ) and plug the charger into a power outlet ( ).
ç Contents ç Chapter Contents 20 • To protect the battery and keep it in optimal condition, do not charge it continuously for more than 24 hours. • For battery chargers that use a power cord, do not attach the charger or cord to other objects. Doing so could result in malfunction or damage to the product. • For details on charging time and the number of shots and recording time possible with a fully charged battery, see Number of Shots/ Recording Time, Playback Time (= 320).
ç Contents ç Chapter Contents 21 Inserting the Battery and Memory Card Insert the included battery and a memory card (sold separately). Note that before using a new memory card (or a memory card formatted in another device), you should format the memory card with this camera (= 250). 1 Check the card’s writeprotect tab. zz Recording is not possible on memory cards with a writeprotect tab when the tab is in the locked (downward) position. Slide the tab up until it clicks into the unlocked position.
ç Chapter Contents ç Contents 22 3 Insert the battery. zz While pressing the battery lock Terminals Battery Lock in the direction of the arrow, insert the battery as shown and push it in until it clicks into the locked position. zz If you insert the battery facing the wrong way, it cannot be locked into the correct position. Always confirm that the battery is facing the right way and locks when inserted. 4 Insert the memory card.
ç Contents ç Chapter Contents 23 • For guidelines on how many shots or hours of recording can be saved on one memory card, see “Number of 4:3 Shots per Memory Card” (= 321). Removing the Battery and Memory Card Remove the battery. zz Open the cover and press the battery lock in the direction of the arrow. XX The battery will pop up. Remove the memory card. zz Push the memory card in until it clicks, and then slowly release it. XX The memory card will pop up.
ç Contents ç Chapter Contents 24 Setting the Date and Time Set the current date and time correctly as follows if the [Date/Time] screen is displayed when you turn the camera on. Information you specify this way is recorded in image properties when you shoot, and it is used when you manage images by shooting date or print images showing the date. You can also add a date stamp to shots, if you wish (= 83). 1 Turn the camera on. zz Press the power button. XX The [Date/Time] screen is displayed.
ç Contents ç Chapter Contents 25 3 Set the home time zone. zz Press the buttons to choose your home time zone. 4 Finish the setup process. zz Press the button when finished. After a confirmation message, the setting screen is no longer displayed. zz To turn off the camera, press the power button. • Unless you set the date, time, and home time zone, the [Date/Time] screen will be displayed each time you turn the camera on. Specify the correct information.
ç Chapter Contents ç Contents 26 Changing the Date and Time Adjust the date and time as follows. 1 Access the camera menu. zz Press the button. 2 Choose [Date/Time]. zz Move the zoom lever to choose the [3] tab. zz Press the buttons to choose [Date/Time], and then press the button. 3 Change the date and time. zz Follow step 2 on = 24 to adjust the settings. zz Press the button to close the menu.
ç Chapter Contents ç Contents 27 Display Language Change the display language as needed. 1 Enter Playback mode. zz Press the <1> button. 2 Access the setting screen. zz Press and hold the button, and then immediately press the button. 3 Set the display language. zz Press the buttons to choose a language, and then press the button. XX Once the display language has been set, the setting screen is no longer displayed.
ç Contents ç Chapter Contents 28 • The current time is displayed if you wait too long in step 2 after pressing the button before you press the button. In this case, press the button to dismiss the time display and repeat step 2. • You can also change the display language by pressing the ] on the [3] tab.
ç Contents 29 ç Chapter Contents Still Images Trying the Camera Out Movies Follow these instructions to turn the camera on, shoot still images or movies, and then view them. Shooting (Smart Auto) For fully automatic selection of the optimal settings for specific scenes, simply let the camera determine the subject and shooting conditions. 1 Turn the camera on. zz Press the power button. XX The startup screen is displayed. 2 Enter [A] mode. zz Set the mode switch to [A].
ç Contents ç Chapter Contents 30 3 Compose the shot. zz To zoom in and enlarge the subject, move the zoom lever toward (telephoto), and to zoom away from the subject, move it toward (wide angle). 4 Shoot. Shooting Still Images Focus. zz Press the shutter button lightly, halfway down. The camera beeps twice after focusing, and AF frames are displayed to indicate image areas in focus.
ç Contents ç Chapter Contents 31 Shoot. zz Press the shutter button all the way down. XX As the camera shoots, a shutter sound is played, and in lowlight conditions, the flash fires automatically. zz Keep the camera still until the shutter sound ends. XX Your shot is only displayed until the camera is ready to shoot again. Shooting Movies Start shooting. zz Press the movie button. Elapsed Time The camera beeps once as recording begins, and [ Rec] is displayed with the elapsed time.
ç Contents ç Chapter Contents 32 Finish shooting. zz Press the movie button again to stop shooting. The camera beeps twice as recording stops. Viewing After shooting images or movies, you can view them on the screen as follows. 1 Enter Playback mode. zz Press the <1> button. XX Your last shot is displayed. 2 Browse through your images. zz To view the previous image, press the button. To view the next image, press the button.
ç Contents ç Chapter Contents 33 zz To access Scroll Display mode, press and hold the buttons for at least one second. In this mode, press the buttons to browse through images. zz To return to single-image display, press the button. zz Movies are identified by a ] icon. To play movies, go [ to step 3. 3 Play movies. zz Press the button, press the buttons to choose [ ], and then press the button again.
ç Contents ç Chapter Contents 34 Erasing the Images You can choose and erase unneeded images one by one. Be careful when erasing images, because they cannot be recovered. 1 Choose an image to erase. zz Press the buttons to choose an image. 2 Erase the image. zz Press the button, press the buttons to choose [a], and then press the button again. zz After [Erase?] is displayed, press the buttons to choose [Erase], and then press the button.
ç Chapter Contents ç Contents ELPH 130 IS IXUS 140 ELPH 120 IS 35 IXUS 135 Software, PDF Manuals (on the included CD-ROM) The software and PDF manuals on the included DIGITAL CAMERA Solution Disk (CD-ROM) (= 2) are introduced below, with instructions for installation, and saving images to a computer. Software After installing the software on the CD-ROM, you can do the following things on your computer.
ç Contents ç Chapter Contents 36 PDF Manuals Camera User Guide zz Refer to this guide for a more in-depth understanding of camera operation. Software Guide zz Refer to this guide when using the software. The guide can be accessed from the help system of software (some software excluded).
ç Chapter Contents ç Contents 37 System Requirements The software can be used on the following computers. Adobe Reader is required to view the PDF manuals. Windows Operating System*1 Windows 8 Windows 7 SP1 Windows Vista SP2 Windows XP SP3 Macintosh Mac OS X 10.6 Mac OS X 10.7 Mac OS X 10.8*2 Computer Computers running one of the above operating systems (preinstalled), with an included USB port and Internet connection Processor Still images 1.6 GHz or higher, Movies Core 2 Duo 1.
ç Contents ç Chapter Contents 38 *1 Wi-Fi image transfer to a computer requires Windows 8, Windows 7 SP1, Mac OS X 10.6.8, Mac OS X 10.7, or Mac OS X 10.8.2 or later. *2 Information on computer models compatible with Mac OS X 10.8 is available on the Apple website. *3 Includes Silverlight 5.1 (max. 100 MB). Additionally, in Windows XP, Microsoft .NET Framework 3.0 or later (max. 500 MB) must be installed. Installation may take some time, depending on computer performance.
ç Contents ç Chapter Contents 39 zz On a Macintosh computer, after inserting the disc, double-click the desktop disc icon to open it, and then double-click the [ ] icon displayed. 2 Begin the installation. zz Click [Easy Installation] and follow the on-screen instructions to complete the installation process. 3 When a message is displayed prompting you to connect the camera, connect it to a computer. zz With the camera turned off, open the cover ( ).
ç Contents ç Chapter Contents 40 zz Insert the larger plug of the interface cable in the computer’s USB port. For details about USB connections on the computer, refer to the computer user manual. 4 Install the files. zz Turn the camera on, and follow the on-screen instructions to complete the installation process. XX The software will connect to the Internet to update to the latest version and download new functions.
ç Contents ç Chapter Contents 41 • When not connected to the Internet, there are the following limitations. - The screen in step 3 will not be displayed. - Some functions may not be installed. • The first time you connect the camera to the computer, drivers will be installed, so it may take a few minutes until camera images are accessible.
ç Contents ç Chapter Contents 42 zz For Windows, follow the steps introduced below. zz In the screen that displays, click the [ program. ] link to modify the zz Choose [Downloads Images From Canon Camera using Canon CameraWindow] and then click [OK]. zz Double click [ CameraWindow ]. 3 Save the images to the computer. zz Click [Import Images from Camera], and then click [Import Untransferred Images].
ç Contents ç Chapter Contents 43 zz After images are saved, close CameraWindow, press the <1> button to turn the camera off, and unplug the cable. zz For instructions on viewing images on a computer, refer to the Software Guide (= 36). • In Windows 7, if the screen in step 2 is not displayed, click the [ ] icon in the taskbar. • To start CameraWindow in Windows Vista or XP, click [Downloads Images From Canon Camera using Canon CameraWindow] on the screen displayed when you turn the camera on in step 2.
ç Contents ç Chapter Contents 44 • Although you can save images to a computer simply by connecting your camera to the computer without using the software, the following limitations apply. - It may take a few minutes after you connect the camera to the computer until camera images are accessible. - Images shot in vertical orientation may be saved in horizontal orientation. - Image protection settings may be cleared from images saved to a computer.
ç Contents ELPH 115 IS ç Chapter Contents 45 IXUS 132 Downloadable Software The software available for download from the Canon website is introduced below, with instructions for installation and saving images to a computer. Software After downloading the software from the Canon website and installing it, you can do the following things on your computer.
ç Chapter Contents ç Contents 46 System Requirements The software can be used on the following computers. Windows Operating System Computer Windows 8 Windows 7 SP1 Windows Vista SP2 Windows XP SP3 Macintosh Mac OS X 10.6 Mac OS X 10.7 Mac OS X 10.8*1 Computers running one of the above operating systems (preinstalled), with an included USB port and Internet connection Still images Mac OS X 10.7 – 10.8: Core 2 Duo or higher Mac OS X 10.6: Core Duo 1.83 GHz or higher Movies Mac OS X 10.7 – 10.
ç Chapter Contents ç Contents 47 *1 Information on computer models compatible with Mac OS X 10.8 is available on the Apple website. *2 Includes Silverlight 5.1 (max. 100 MB). Additionally, in Windows XP, Microsoft .NET Framework 3.0 or later (max. 500 MB) must be installed. Installation may take some time, depending on computer performance. • Check the Canon website for the latest system requirements, including supported OS versions. Installing the Software Windows 7 and Mac OS X 10.
ç Contents ç Chapter Contents 48 2 Begin the installation. zz Open the downloaded file. zz Click [Easy Installation] and follow the on-screen instructions to complete the installation process. 3 When a message is displayed prompting you to connect the camera, connect it to a computer. zz With the camera turned off, open the cover ( ). With the smaller plug of the USB cable in the orientation shown, insert the plug fully into the camera terminal ( ).
ç Contents ç Chapter Contents 49 4 Install the files. zz Turn the camera on, and follow the on-screen instructions to complete the installation process. XX The software will connect to the Internet to update to the latest version and download new functions. Installation may take some time, depending on computer performance and the Internet connection. zz Click [Finish] or [Restart] on the screen after installation. zz Turn the camera off and disconnect the cable.
ç Contents ç Chapter Contents 50 Saving Images to a Computer Windows 7 and Mac OS X 10.6 are used here for the sake of illustration. For other functions, refer to the help system of the relevant software (some software excluded). 1 Connect the camera to the computer. zz Follow step 3 in “Installing the Software” (= 48) to connect the camera to a computer. 2 Turn the camera on to access CameraWindow. zz Press the <1> button to turn the camera on.
ç Contents ç Chapter Contents 51 zz Choose [Downloads Images From Canon Camera using Canon CameraWindow] and then click [OK]. zz Double click [ CameraWindow ]. 3 Save the images to the computer. zz Click [Import Images from Camera], and then click [Import Untransferred Images]. XX Images are now saved to the Pictures folder on the computer, in separate folders named by date. zz After images are saved, close CameraWindow, press the <1> button to turn the camera off, and unplug the cable.
ç Contents ç Chapter Contents 52 • In Windows 7, if the screen in step 2 is not displayed, click the [ ] icon in the taskbar. • To start CameraWindow in Windows Vista or XP, click [Downloads Images From Canon Camera using Canon CameraWindow] on the screen displayed when you turn the camera on in step 2. If CameraWindow is not displayed, click the [Start] menu and choose [All Programs] ► [Canon Utilities] ► [CameraWindow] ► [CameraWindow].
ç Chapter Contents ç Contents System Map ELPH 130 IS IXUS 140 ELPH 120 IS 53 IXUS 135 Included Accessories Wrist Strap WS-800 Battery Pack Battery Charger DIGITAL NB-11L*1 CB-2LF/ CAMERA 1 CB-2LFE* Solution Disk Interface Cable IFC-400PCU*1 Power Memory Card Card Reader Cable AV Cable AVC-DC400 AC Adapter Kit ACK-DC90 Flash Unit High-Power Flash HF-DC2*2 *1 Also available for purchase separately. *2 High-Power Flash HF-DC1 also supported.
ç Chapter Contents ç Contents ELPH 115 IS IXUS 132 Included Accessories Wrist Strap WS-800 Battery Pack NB-11L*1 Battery Charger CB-2LF/ CB-2LFE*1 USB cable (camera end: Mini-B)*3 Power Card Reader Memory Card Cable Windows/ Macintosh Computer AV Cable AVC-DC400 TV/Video System AC Adapter Kit ACK-DC90 Flash Unit Canon-brand PictBridgeCompatible Printers High-Power Flash HF-DC2*2 *1 Also available for purchase separately. *2 High-Power Flash HF-DC1 also supported.
ç Contents ç Chapter Contents 55 Use of genuine Canon accessories is recommended. This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack).
ç Contents Advanced Guide 1 Camera Basics Practical guide that introduces other camera basics and describes shooting and playback options On/Off...................................57 Shutter Button.....................59 Shooting Display Options...60 FUNC. Menu.........................61 MENU Menu..........................63 Indicator Display.................65 Clock.....................................
ç Contents ç Chapter Contents On/Off 57 Shooting Mode zz Press the power button to turn the camera on and prepare for shooting. zz To turn the camera off, press the power button again. Playback Mode zz Press the <1> button to turn the camera on and view your shots. zz To turn the camera off, press the <1> button again. • To switch to Playback mode from Shooting mode, press the <1> button. • To switch to Shooting mode from Playback mode, press the shutter button halfway (= 59).
ç Contents ç Chapter Contents 58 Power-Saving Features (Auto Power Down) As a way to conserve battery power, the camera automatically deactivates the screen (Display Off) and then turns itself off after a specific period of inactivity. Power Saving in Shooting Mode The screen is automatically deactivated after about one minute of inactivity. In about two more minutes, the lens is retracted and the camera turns itself off.
ç Chapter Contents ç Contents Shutter Button 59 To ensure your shots are in focus, always begin by holding the shutter button halfway down, and once the subject is in focus, press the button all the way down to shoot. In this manual, shutter button operations are described as pressing the button halfway or all the way down. 1 Press halfway. (Press lightly to focus.) zz Press the shutter button halfway. The camera beeps twice, and AF frames are displayed around image areas in focus.
ç Contents ç Chapter Contents Shooting Display Options 60 Press the
button to view other information on the screen, or to hide the information. For details on the information displayed, see On-Screen Information (= 297). Information is displayed No information is displayed • Screen brightness is automatically increased by the night display function when you are shooting under low light, making it easier to check how shots are composed.
ç Contents ç Chapter Contents FUNC. Menu 61 Configure commonly used functions through the FUNC. menu as follows. Note that menu items and options vary depending on the shooting mode (= 304 – 309) or playback mode (= 317). 1 Access the FUNC. menu. zz Press the button. 2 Choose a menu item. zz Press the buttons to Options Menu Items choose a menu item, and then press the or button.
ç Contents ç Chapter Contents 62 4 Finish the setup process. zz Press the button. XX The screen before you pressed the button in step 1 is displayed again, showing the option you configured. • To undo any accidental setting changes, you can restore the camera’s default settings (= 255).
ç Contents ç Chapter Contents MENU Menu 63 Configure a variety of camera functions through other menus as follows. Menu items are grouped by purpose on tabs, such as shooting [4], playback [1], and so on. Note that available settings vary depending on the selected shooting or playback mode (= 310 – 317). 1 Access the menu. zz Press the button. 2 Choose a tab. zz Move the zoom lever to choose a tab.
ç Contents ç Chapter Contents 64 3 Choose a setting. zz Press the buttons to choose a setting. zz To choose settings with options not shown, first press the or button to switch screens, and then press the buttons to select the setting. zz To return to the previous screen, press the button. 4 Choose an option. zz Press the buttons to choose an option. 5 Finish the setup process.
ç Contents ç Chapter Contents Indicator Display 65 The indicator on the back of the camera (= 6) lights up or blinks depending on the camera status.
ç Contents ç Chapter Contents Clock 66 You can check the current time. zz Press and hold the button. XX The current time appears. zz If you hold the camera vertically while using the clock function, it will switch to vertical display. Press the buttons to change the display color. zz Press the button again to cancel the clock display. • When the camera is off, press and hold the button, then press the power button to display the clock.
ç Contents 2 Smart Auto Mode Convenient mode for easy shots with greater control over shooting Shooting (Smart Auto)........68 Common, Convenient Features..............................77 Image Customization Features..............................85 Helpful Shooting Features..............................89 Customizing Camera Operation............................
ç Contents 68 ç Chapter Contents Still Images Shooting (Smart Auto) Movies For fully automatic selection at optimal settings for specific scenes, simply let the camera determine the subject and shooting conditions. 1 Turn the camera on. zz Press the power button. XX The startup screen is displayed. 2 Enter [A] mode. zz Set the mode switch to [A]. zz Aim the camera at the subject. The camera will make a slight clicking noise as it determines the scene.
ç Contents ç Chapter Contents 69 3 Compose the shot. zz To zoom in and enlarge the Zoom Bar subject, move the zoom lever toward (telephoto), and to zoom away from the subject, move it toward (wide angle). (A zoom bar showing the zoom position is displayed.) 4 Shoot. Shooting Still Images Focus. zz Press the shutter button halfway. The camera beeps twice after focusing, and AF frames are displayed to indicate image areas in focus.
ç Contents ç Chapter Contents 70 Shoot. zz Press the shutter button all the way down. XX As the camera shoots, a shutter sound is played, and in lowlight conditions, the flash fires automatically. zz Keep the camera still until the shutter sound ends. XX Your shot is only displayed until the camera is ready to shoot again. Shooting Movies Start shooting. zz Press the movie button. Elapsed Time The camera beeps once as recording begins, and [ Rec] is displayed with the elapsed time.
ç Contents ç Chapter Contents 71 esize the subject and R recompose the shot as needed. zz To resize the subject, repeat the operations in step 3 (= 69). However, note that the sound of camera operations will be recorded. zz When you recompose shots, the focus, brightness, and colors will be automatically adjusted. Finish shooting. zz Press the movie button again to stop shooting. The camera beeps twice as recording stops. zz Recording will stop automatically when the memory card becomes full.
ç Contents ç Chapter Contents 72 Still Images/Movies • If the camera is turned on while the
button is held down, the camera will no longer sound. To activate sounds again, press the button and choose [Mute] on the [3] tab, and then press the buttons to choose [Off]. Still Images • A flashing [ ] icon warns that images are more likely to be blurred by camera shake. In this case, mount the camera on a tripod or take other measures to keep it still.
ç Chapter Contents ç Contents 73 Movies • The camera may become warm when shooting movies repeatedly over an extended period. This does not indicate damage. Microphone • Keep your fingers away from the microphone while shooting movies. Blocking the microphone may prevent audio from being recorded or may cause the recording to sound muffled. • Avoid touching camera controls other than the movie button when shooting movies, because sounds made by the camera will be recorded. • Audio recording is monaural.
ç Chapter Contents ç Contents Still Images Movies Scene Icons In [A] mode, shooting scenes determined by the camera are indicated by the icon displayed, and corresponding settings are automatically selected for optimal focusing, subject brightness, and color.
ç Contents 75 ç Chapter Contents Still Images Movies Image Stabilization Icons Optimal image stabilization for the shooting conditions is automatically applied (Intelligent IS). Additionally, the following icons are displayed in [A] mode.
ç Contents 76 ç Chapter Contents Still Images Movies On-Screen Frames A variety of frames are displayed once the camera detects subjects you are aiming the camera at. • A white frame is displayed around the subject (or person’s face) determined by the camera to be the main subject, and gray frames are displayed around other detected faces. Frames follow moving subjects within a certain range to keep them in focus.
ç Contents ç Chapter Contents Common, Convenient Features Still Images 77 Movies Zooming In Closer on Subjects (Digital Zoom) When distant subjects are too far away to enlarge using the optical zoom, use digital zoom for up to about 32x enlargement. 1 Move the zoom lever toward . zz Hold the lever until zooming stops. XX Zooming stops at the largest possible zoom factor (before the image becomes noticeably grainy), which is then indicated on the screen.
ç Contents ç Chapter Contents 78 • Moving the zoom lever will display the zoom bar (which indicates the zoom position). The color of the zoom bar will change depending on the zoom range. - White range: optical zoom range where the image will not appear grainy. - Yellow range: digital zoom range where the image is not noticeably grainy (ZoomPlus). - Blue range: digital zoom range where the image will appear grainy.
ç Chapter Contents ç Contents Still Images Movies Using the Self-Timer With the self-timer, you can include yourself in group photos or other timed shots. The camera will shoot about 10 seconds after you press the shutter button. 1 Configure the setting. zz Press the button, choose [ ] in the menu, and then choose the []] option (= 61). XX Once the setting is complete, []] is displayed. 2 Shoot.
ç Contents 80 ç Chapter Contents XX Once you start the self-timer, the lamp will blink and the camera will play a self-timer sound. XX Two seconds before the shot, the blinking and sound will speed up. (The lamp will remain lit in case the flash fires.) zz To cancel shooting after you have triggered the self-timer, press the button. zz To restore the original setting, choose [ ] in step 1.
ç Contents 81 ç Chapter Contents Still Images Movies Customizing the Self-Timer You can specify the delay (0 – 30 seconds) and number of shots (1 – 10). 1 Choose [$]. zz Following step 1 in “Using the Self-Timer” (= 79), choose [$] and press the button. 2 Configure the setting. zz Press the buttons to choose [Delay] or [Shots]. zz Press the buttons to choose a value, and then press the button. XX Once the setting is complete, [$] is displayed.
ç Contents ç Chapter Contents 82 • When you specify multiple shots, image brightness and white balance are determined by the first shot. More time is required between shots when the flash fires or when you have specified to take many shots. Shooting will stop automatically when the memory card becomes full. • When a delay longer than two seconds is specified, two seconds before the shot, the lamp blinking and self-timer sound will speed up. (The lamp will remain lit in case the flash fires.
ç Chapter Contents ç Contents 83 Still Images Adding a Date Stamp The camera can add the shooting date to images, in the lowerright corner. However, note that date stamps cannot be edited or removed, so confirm beforehand that the date and time are correct (= 24). 1 Configure the setting. zz Press the button, ] on the choose [Date Stamp [4] tab, and then choose the desired option (= 63). XX Once the setting is complete, [ ] is displayed. 2 Shoot.
ç Contents ç Chapter Contents 84 • Shots taken without adding a date stamp can be printed with one as follows. However, adding a date stamp this way to images that already have one may cause it to be printed twice. - Print using printer functions (= 265) - Use camera DPOF print settings (= 274) to print ELPH 130 IS IXUS 140 ELPH 120 IS IXUS 135 - Use the included software to print For details, refer to the Software Guide (= 36).
ç Contents ç Chapter Contents Image Customization Features 85 Still Images Changing the Aspect Ratio Change the image aspect ratio (ratio of width to height) as follows. Configure the setting. zz Press the button, choose [ ] in the menu, and choose the desired option (= 61). XX Once the setting is complete, the screen aspect ratio will be updated. zz To restore the original setting, repeat this process but choose [ ]. Same aspect ratio as widescreen HDTVs.
ç Contents ç Chapter Contents 86 Still Images Changing Image Resolution (Size) Choose from 4 levels of image resolution, as follows. For guidelines on how many shots at each resolution setting can fit on a memory card, see Number of 4:3 Shots per Memory Card (= 321). Configure the setting. zz Press the button, choose [ ] in the menu, and choose the desired option (= 61). XX The option you configured is now displayed. zz To restore the original setting, repeat this process but choose [ ].
ç Chapter Contents ç Contents 87 Still Images Red-Eye Correction Red-eye that occurs in the flash photography can be automatically corrected as follows. 1 Access the [Flash Settings] screen. zz Press the button, choose [Flash Settings] on the [4] tab, and then press the button (= 63). 2 Configure the setting. zz Choose [Red-Eye Corr.], and then choose [On] (= 63). XX Once the setting is complete, [R] is displayed. zz To restore the original setting, repeat this process but choose [Off].
ç Chapter Contents ç Contents • You can also correct existing images (= 184). • You can also access the screen in step 2 by pressing the button and then the button. Movies Changing Movie Image Quality 2 image quality settings are available. For guidelines on the maximum movie length at each level of image quality that will fit on a memory card, see Recording Time per Memory Card (= 322). Configure the setting.
ç Chapter Contents ç Contents Helpful Shooting Features Still Images Movies Displaying Grid Lines Grid lines can be displayed on the screen for vertical and horizontal reference while shooting. Configure the setting. zz Press the button, choose [Grid Lines] on the [4] tab, and then choose [On] (= 63). XX Once the setting is complete, grid lines are displayed on the screen. zz To restore the original setting, repeat this process but choose [Off]. • Grid lines are not recorded in your shots.
ç Contents ç Chapter Contents 90 Still Images Magnifying the Area in Focus You can check the focus by pressing the shutter button halfway, which will enlarge the portion of the image in focus in the AF frame. 1 Configure the setting. zz Press the button, choose [AF-Point Zoom] on the [4] tab, and then choose [On] (= 63). 2 Check the focus. zz Press the shutter button halfway. The face detected as the main subject is now magnified. zz To restore the original setting, choose [Off] in step 1.
ç Contents ç Chapter Contents 91 • The area in focus will not be magnified when you press the shutter button halfway if a face was not detected, if the person is too close to the camera and their face is too large for the screen, or if the camera detects subject movement. • The display will not magnify when using the digital zoom (= 77) or Tracking AF (= 136). Still Images Checking for Closed Eyes [ ] is displayed when the camera detects that people may have closed their eyes.
ç Contents ç Chapter Contents 92 2 Shoot. XX [ ] flashes when the camera detects a person whose eyes are closed. zz To restore the original setting, choose [Off] in step 1. • When you have specified multiple shots in [$] mode, this function is only available for the final shot. • A frame is displayed around people whose eyes are closed when you have selected [2 sec.], [4 sec.], [8 sec.], or [Hold] in [Display Time] (= 95). • The frame is not displayed when [Display Time] is set to [Quick] (= 95).
ç Contents ç Chapter Contents Customizing Camera Operation 93 Customize shooting functions on the [4] tab of the menu as follows. For instructions on menu functions, see MENU Menu (= 63). Still Images Deactivating the AF Assist Beam You can deactivate the lamp that normally lights up to help you focus when you press the shutter button halfway in low-light conditions. Configure the setting. zz Press the button, choose [AF-assist Beam] on the [4] tab, and then choose [Off] (= 63).
ç Contents ç Chapter Contents 94 Still Images Deactivating the Red-Eye Reduction Lamp You can deactivate the red-eye reduction lamp that lights up to reduce red-eye when the flash is used in low-light shots. 1 Access the [Flash Settings] screen. zz Press the button, choose [Flash Settings] on the [4] tab, and then press the button (= 63). 2 Configure the setting. zz Choose [Red-Eye Lamp], and then choose [Off] (= 63).
ç Contents ç Chapter Contents 95 Still Images Changing the Image Display Style After Shots You can change how long images are displayed and what information is displayed immediately after shooting. Changing the Image Display Period After Shots 1 Access the [Review image after shooting] screen. zz Press the button, choose [Review image after shooting] on the [4] tab, and then press the button. 2 Configure the setting. zz Press the buttons to choose [Display Time].
ç Chapter Contents ç Contents 96 Still Images Changing the Screen Displayed After Shots 1 Set [Display Time] to 2 [2 sec.], [4 sec.], [8 sec.], or [Hold] (= 95). Configure the setting. zz Press the buttons to choose [Display Info]. Press the buttons to choose the desired option (= 63). zz To restore the original setting, repeat this process but choose [Off]. Off Displays only the image. Detailed Displays shooting details (= 299).
ç Contents 97 3 Other Shooting Modes Shoot more effectively in various scenes, and take shots enhanced with unique image effects or captured using special functions Specific Scenes...................98 Applying Special Effects..100 Special Modes for Other Purposes...........................
ç Chapter Contents ç Contents Specific Scenes Choose a mode matching the shooting scene, and the camera will automatically configure the settings for optimal shots. 1 Enter <4> mode. zz Set the mode switch to <4>. 2 Choose a shooting mode. zz Press the button, choose [G] in the menu, and then choose a shooting mode (= 61). 3 Shoot. Still Images Movies I Shoot portraits (Portrait) zz Take shots of people with a softening effect.
ç Contents 99 ç Chapter Contents Still Images Shoot under low light (Low Light) zz Shoot with minimal camera shake and subject blur even in low-light conditions. Still Images Movies P Shoot with snowy backgrounds (Snow) zz Bright, natural-colored shots of people against snowy backgrounds. Still Images Movies t Shoot fireworks (Fireworks) zz Vivid shots of fireworks. • In [t] mode, mount the camera on a tripod or take other measures to keep it still and prevent camera shake.
ç Contents 100 ç Chapter Contents Applying Special Effects Add a variety of effects to images when shooting. 1 Choose a shooting mode. zz Follow steps 1 – 2 in “Specific Scenes” (= 98) to choose a shooting mode. 2 Shoot. Still Images Movies Shoot in vivid colors (Super Vivid) zz Shots in rich, vivid colors. Still Images Movies Posterized shots (Poster Effect) zz Shots that resemble an old poster or illustration.
ç Contents ç Chapter Contents 101 Still Images Shooting with a Fish-Eye Lens Effect (Fish-eye Effect) Shoot with the distorting effect of a fish-eye lens. 1 Choose [ ]. zz Follow steps 1 – 2 in “Specific Scenes” (= 98) and choose [ ]. 2 Choose an effect level. zz Press the
button, press the buttons to choose an effect level, and then press the button. XX A preview is shown of how your shot will look with the effect applied. 3 Shoot.
ç Contents 102 ç Chapter Contents Still Images Movies Shots Resembling Miniature Models (Miniature Effect) Creates the effect of a miniature model, by blurring image areas above and below your selected area. You can also make movies that look like scenes in miniature models by choosing the playback speed before the movie is recorded. People and objects in the scene will move quickly during playback. Note that sound is not recorded. 1 Choose [ ].
ç Contents ç Chapter Contents 103 3 For movies, choose the movie playback speed. zz Press the button, and then press the buttons to choose the speed. 4 Return to the shooting screen and shoot. zz Press the button to return to the shooting screen, and then shoot. Playback Speed and Estimated Playback Time (for One-Minute Clips) Speed Playback Time Approx. 12 sec. Approx. 6 sec. Approx. 3 sec. • The zoom is not available when shooting movies. Be sure to set the zoom before shooting.
ç Contents ç Chapter Contents 104 • To switch the orientation of the frame to vertical, press the buttons in step 2. To move the frame, press the buttons again. To return the frame to horizontal orientation, press the buttons. • Holding the camera vertically will change the orientation of the frame. • Movie image quality is [ ] at an aspect ratio of [ ] and [ ] at an aspect ratio of [ ] (= 85). These quality settings cannot be changed.
ç Chapter Contents ç Contents Standard Shots resemble toy camera images. Warm Images have a warmer tone than with [Standard]. Cool Images have a cooler tone than with [Standard]. • Try taking some test shots first, to make sure you obtain the desired results. Still Images Movies Shooting in Monochrome Shoot images in black and white, sepia, or blue and white. 1 Choose [ ]. zz Follow steps 1 – 2 in “Specific Scenes” (= 98) and choose [ ]. 2 Choose a color tone.
ç Contents 106 ç Chapter Contents Still Images Movies Shooting with Color Accent Choose a single image color to keep and change other colors to black and white. 1 Choose [T]. zz Follow steps 1 – 2 in “Specific Scenes” (= 98) and choose [T]. 2 Access the setting screen. zz Press the
button. XX The original image and the Color Accent image are displayed one after another. XX By default, green is the color that will be kept. 3 Specify the color.
ç Contents ç Chapter Contents 4 Specify the range of 107 colors to keep. zz Press the buttons to adjust the range. zz To keep only your specified color, choose a large negative value. To keep colors similar to your specified color as well, choose a large positive value. zz Press the button to return to the shooting screen. 5 Shoot. • Using the flash in this mode may cause unexpected results. • In some shooting scenes, images may look grainy and colors may not look as expected.
ç Contents ç Chapter Contents 108 2 Access the setting screen. zz Press the
button. XX The original image and the Color Swap image are displayed one after another. XX By default, green will be replaced with gray. 3 Specify the color to replace. zz Position the center frame over the color to replace, and then press the button. XX The specified color is recorded. 4 Specify the new color. zz Position the center frame over the new color, and then press the button.
ç Contents ç Chapter Contents 5 Specify the range of 109 colors to replace. zz Press the buttons to adjust the range. zz To replace only your specified color, choose a large negative value. To replace colors similar to your specified color as well, choose a large positive value. zz Press the button to return to the shooting screen. 6 Shoot. • Using the flash in this mode may cause unexpected results. • In some shooting scenes, images may look grainy and colors may not look as expected.
ç Contents ç Chapter Contents 110 Special Modes for Other Purposes Still Images Auto Shooting After Face Detection (Smart Shutter) Auto Shooting After Smile Detection The camera shoots automatically after detecting a smile, even without you pressing the shutter button. 1 Choose [ ]. zz Follow steps 1 – 2 in “Specific Scenes” (= 98) and choose [ ], and then press the
button. zz Press the buttons to choose [ ], and then press the button.
ç Contents ç Chapter Contents 111 2 Aim the camera at a person. zz Each time the camera detects a smile, it will shoot after the lamp lights up. zz To pause smile detection, press the button. Press the button again to resume detection. • Switch to another mode when you finish shooting, or the camera will continue shooting each time a smile is detected. • You can also shoot as usual by pressing the shutter button.
ç Chapter Contents ç Contents 112 Still Images Using the Wink Self-Timer Aim the camera at a person and press the shutter button all the way down. The camera will shoot about two seconds after a wink is detected. 1 Choose [ ]. zz Follow steps 1 – 2 in “Specific Scenes” (= 98) and choose [ ], and then press the
button. zz Press the buttons to choose [ ], and then press the button. 2 Compose the shot and press the shutter button halfway.
ç Contents ç Chapter Contents 113 4 Face the camera and wink. XX The camera will shoot about two seconds after detecting a wink by the person whose face is inside the frame. zz To cancel shooting after you have triggered the self-timer, press the button. • If the wink is not detected, wink again slowly and deliberately. • Winking may not be detected if eyes are obscured by hair, a hat, or glasses. • Closing and opening both eyes at once will also be detected as a wink.
ç Chapter Contents ç Contents 114 Still Images Using the Face Self-Timer The camera will shoot about two seconds after detecting that the face of another person (such as the photographer) has entered the shooting area (= 135). This is useful when including yourself in group photos or similar shots. 1 Choose [ ]. zz Follow steps 1 – 2 in “Specific Scenes” (= 98) and choose [ ], and then press the
button. zz Press the buttons to choose [ ], and then press the button.
ç Contents ç Chapter Contents 115 3 Press the shutter button all the way down. XX The camera now enters shooting standby mode, and [Look straight at camera to start count down] is displayed. XX The lamp blinks and the selftimer sound is played. 4 Join the subjects in the shooting area and look at the camera. XX After the camera detects a new face, the lamp blinking and self-timer sound will speed up. (When the flash fires, the lamp will remain lit.) About two seconds later, the camera will shoot.
ç Contents ç Chapter Contents 116 Still Images Shooting Long Exposures (Long Shutter) Specify a shutter speed of 1 – 15 seconds to shoot long exposures. In this case, mount the camera on a tripod or take other measures to prevent camera shake. 1 Choose [N]. zz Follow steps 1 – 2 in “Specific Scenes” (= 98) and choose [N]. 2 Choose the shutter speed. zz Press the button, press the buttons to choose the shutter speed, and then press the button. 3 Check the exposure.
ç Contents ç Chapter Contents 117 • On-screen image brightness in step 3, when you pressed the shutter button halfway, may not match the brightness of your shots. • With shutter speeds of 1.3 seconds or slower, there will be a delay before you can shoot again, as the camera processes images to reduce noise. • Set [IS Mode] to [Off] when using a tripod or other means to hold the camera still (= 146). • If the flash fires, your shot may be overexposed. In this case, set the flash to [!] and shoot again.
ç Contents ç Chapter Contents 118 3 Take additional shots. zz Compose the second shot so that it partially overlaps the image area of the first shot. zz Minor misalignment of overlapping portions will be corrected automatically when the images are combined. zz You can take up to 26 shots, the same way you took the second shot. 4 Finish shooting. zz Press the button. 5 Use the software to combine the images. zz For instructions on merging images, refer to the Software Guide (= 36, 45).
ç Contents 4 P Mode More discerning shots, in your preferred shooting style • Instructions in this chapter apply to the camera in [G] mode, with the mode switch set to <4>. • [G]: Program AE; AE: Auto Exposure • Before using a function introduced in this chapter in modes other than [G], make sure the function is available in that mode (= 301 – 315). Shooting in Program AE ([P] Mode)..........................120 Image Brightness (Exposure Compensation).................
ç Contents 120 ç Chapter Contents Still Images Movies Shooting in Program AE ([P] Mode) You can customize many function settings to suit your preferred shooting style. 1 Enter [G] mode. zz Follow steps 1 – 2 in “Specific Scenes” (= 98) and choose [G]. 2 Customize the settings as desired (= 121 – 146), and then shoot. • If adequate exposure cannot be obtained when you press the shutter button halfway, shutter speeds and aperture values are displayed in orange.
ç Contents 121 ç Chapter Contents Image Brightness (Exposure Compensation) Still Images Movies Adjusting Image Brightness (Exposure Compensation) The standard exposure set by the camera can be adjusted in 1/3stop increments, in a range of –2 to +2. zz Press the button. As Exposure Compensation Bar you watch the screen, press the buttons to adjust brightness, and then press the button again when finished. XX The correction level you specified is now displayed.
ç Contents ç Chapter Contents 122 Still Images Locking Image Brightness/Exposure (AE Lock) Before shooting, you can lock the exposure, or you can specify focus and exposure separately. 1 Deactivate the flash (= 82). 2 Lock the exposure. zz Aim the camera at the subject to shoot with the exposure locked. With the shutter button pressed halfway, press the button. XX [&] is displayed, and the exposure is locked. zz To unlock AE, release the shutter button and press the button again.
ç Contents ç Chapter Contents 123 Still Images Changing the Metering Method Adjust the metering method (how brightness is measured) to suit shooting conditions as follows. zz Press the button, choose [ ] in the menu, and choose the desired option (= 6 1). XX The option you configured is now displayed. Evaluative For typical shooting conditions, including backlit shots. Automatically adjusts exposure to match the shooting conditions.
ç Contents ç Chapter Contents 124 Still Images Changing the ISO Speed zz Press the button, choose [ ] in the menu, and choose 1). the desired option (=6 XX The option you configured is now displayed. Automatically adjusts the ISO speed to suit the shooting mode and conditions. Low For shooting outdoors in fair weather. For shooting in cloudy conditions, or at twilight. High For shooting night scenes, or in dark rooms.
ç Contents ç Chapter Contents 125 Still Images Correcting Image Brightness (i-Contrast) Before shooting, excessively bright or dark image areas (such as faces or backgrounds) can be detected and automatically adjusted to the optimal brightness. Insufficient overall image contrast can also be automatically corrected before shooting to make subjects stand out better. zz Press the button, choose [i-Contrast] on the [4] tab, and then choose [Auto] (= 63).
ç Contents ç Chapter Contents Color and Continuous Shooting Still Images 126 Movies Adjusting White Balance By adjusting white balance (WB), you can make image colors look more natural for the scene you are shooting. zz Press the button, choose [ ] in the menu, and choose the desired option (= 61). XX The option you configured is now displayed. Auto Automatically sets the optimal white balance for the shooting conditions. Day Light For shooting outdoors in fair weather.
ç Chapter Contents ç Contents Still Images Movies Custom White Balance For image colors that look natural under the light in your shot, adjust white balance to suit the light source where you are shooting. Set the white balance under the same light source that will illuminate your shot. zz Follow the steps in “Adjusting White Balance” (= 126) to choose [ ]. zz Aim the camera at a plain white subject, so that the entire screen is white. Press the button.
ç Contents 128 ç Chapter Contents Still Images Movies Changing Image Color Tones (My Colors) Change image color tones as desired, such as converting images to sepia or black and white. zz Press the button, choose [ ] in the menu, and choose the desired option (= 61). XX The option you configured is now displayed. My Colors Off ― Vivid Emphasizes contrast and color saturation, making images sharper. Neutral Tones down contrast and color saturation for subdued images.
ç Contents 129 ç Chapter Contents Vivid Red Emphasizes reds in images. Makes red subjects more vivid. Custom Color Adjust contrast, sharpness, color saturation, and other qualities as desired (= 129). • White balance (= 126) cannot be set in [ ] or [ ] modes. • With [ ] and [ ] modes, colors other than people’s skin tone may be modified. These settings may not produce the expected results with some skin tones.
ç Chapter Contents ç Contents 130 2 Configure the setting. zz Press the buttons to choose an option, and then specify the value by pressing the buttons. zz For stronger/more intense effects (or darker skin tones), adjust the value to the right, and for weaker/lighter effects (or lighter skin tones), adjust the value to the left. zz Press the button to complete the setting. Still Images Continuous Shooting Hold the shutter button all the way down to shoot continuously.
ç Contents ç Chapter Contents 131 • Cannot be used with the self-timer (= 79) or [Blink Detection] (= 91). • During continuous shooting, focus and exposure are locked at the position/level determined when you pressed the shutter button halfway. • Shooting may stop momentarily or continuous shooting may slow down depending on shooting conditions, camera settings, and the zoom position. • As more shots are taken, shooting may slow down. • Shooting may slow down if the flash fires.
ç Contents ç Chapter Contents Shooting Range and Focusing 132 Still Images Shooting Close-ups (Macro) To restrict the focus to subjects at close range, set the camera to [e]. For details on the focusing range, see Shooting Range (= 323). zz Press the button, press the buttons to choose [e], and then press the button. XX Once the setting is complete, [e] is displayed. • If the flash fires, vignetting may occur.
ç Contents 133 ç Chapter Contents Still Images Shooting Distant Subjects (Infinity) To restrict the focus to distant subjects, set the camera to [u]. For details on the focusing range, see Shooting Range (= 323). zz Press the button, press the buttons to choose [u], and then press the button. XX Once the setting is complete, [u] is displayed. Still Images Movies Digital Tele-Converter The focal length of the lens can be increased by approximately 1.6x or 2.0x.
ç Contents 134 ç Chapter Contents • The digital tele-converter cannot be used with digital zoom (= 77) and AF-point zoom (= 90). • The respective focal lengths when using [1.6x] and [2.0x] are 44.8 – 358.4 mm and 56.0 – 448.0 mm (35mm film equivalent). • The shutter speed may be equivalent when you move the zoom lever all the way toward for maximum telephoto, and when you zoom in to enlarge the subject to the same size following step 2 in “Zooming In Closer on Subjects (Digital Zoom)” (= 77).
ç Contents 135 ç Chapter Contents Still Images Movies Face AiAF • Detects people’s faces, and then sets the focus, exposure (evaluative metering only), and white balance ([ ] only). • After you aim the camera at the subject, a white frame is displayed around the person’s face determined by the camera to be the main subject, and up to two gray frames are displayed around other detected faces. • When the camera detects movement, frames will follow moving subjects, within a certain range.
ç Contents ç Chapter Contents 136 Still Images Choosing Subjects to Focus On (Tracking AF) Shoot after choosing a subject to focus on as follows. 1 Choose [Tracking AF]. zz Follow the steps in “Changing the AF Frame Mode” (= 134) to choose [Tracking AF]. XX [ ] is displayed in the center of the screen. 2 Choose a subject to focus on. zz Aim the camera so that [ ] is on the desired subject, and then press the button. XX When the subject is detected, the camera beeps and [ ] is displayed.
ç Contents ç Chapter Contents 3 Shoot. 137 zz Press the shutter button halfway. [ ] changes to a blue [ ], which follows the subject as the camera continues to adjust the focus and exposure (Servo AF) (= 139). zz Press the shutter button all the way down to shoot. XX Even after your shot, [ ] is still displayed and the camera continues to track the subject. • [Servo AF] (= 139) is set to [On] and cannot be changed.
ç Contents 138 ç Chapter Contents Still Images Movies Center One AF frame is displayed in the center. Effective for reliable focusing. • A yellow AF frame is displayed with [ ] if the camera cannot focus when you press the shutter button halfway. Note that AF-point zooming (= 90) is not possible. • To reduce the AF frame size, press the button and set [AF Frame Size] on the [4] tab to [Small] (= 63).
ç Chapter Contents ç Contents 139 Still Images Shooting with Servo AF This mode helps avoid missing shots of subjects in motion, because the camera continues to focus on the subject and adjust the exposure as long as you press the shutter button halfway. 1 Configure the setting. zz Press the button, choose [Servo AF] on the [4] tab, and then choose [On] (= 63). 2 Focus.
ç Contents 140 ç Chapter Contents Still Images Movies Changing the Focus Setting You can change default camera operation of constantly focusing on subjects it is aimed at, even when the shutter button is not pressed. Instead, you can limit camera focusing to the moment you press the shutter button halfway. zz Press the button, choose [Continuous AF] on the [4] tab, and then choose [Off] (= 63).
ç Contents 141 ç Chapter Contents Still Images Movies Shooting with the AF Lock The focus can be locked. After you lock the focus, the focal position will not change even when you release your finger from the shutter button. 1 Lock the focus. zz With the shutter button pressed halfway, press the button. XX The focus is now locked, and [%] is displayed. zz To unlock the focus, release the shutter button and press the button again. In this case, [%] is no longer displayed.
ç Contents ç Chapter Contents Flash 142 Still Images Activating Flash You can have the flash fire for each shot. For details on the flash range, see Flash Range (= 323). Configure the setting. zz Press the button, press the buttons to choose [h], and then press the button. XX Once the setting is complete, [h] is displayed.
ç Contents ç Chapter Contents 143 XX Once the setting is complete, [Z] is displayed. 2 Shoot. zz Even after the flash fires, ensure that the main subject does not move until the shutter sound is finished playing. • Mount the camera on a tripod or take other measures to keep it still and prevent camera shake. Additionally, you should set [IS Mode] to [Off] when using a tripod or other means to hold the camera still (= 146).
ç Contents ç Chapter Contents 144 zz To unlock FE, release the shutter button and press the button again. In this case, [(] is no longer displayed. 3 Compose the shot and shoot.
ç Chapter Contents ç Contents Other Settings 145 Still Images Changing the Compression Ratio (Image Quality) Choose from two compression ratios, as follows: (Super Fine), (Fine). For guidelines on how many shots at each compression ratio can fit on a memory card, see Number of 4:3 Shots per Memory Card (= 321). Configure the setting. zz Press the button, choose [ ] in the menu, and choose the desired option (= 61).
ç Chapter Contents ç Contents Still Images Movies Changing the IS Mode Settings zz Press the button, choose [IS Mode] on the [4] tab, and then choose the desired option (= 63). Optimal image stabilization for the Continuous shooting conditions is automatically applied (Intelligent IS) (= 75). Image stabilization Shoot Only* is active only at the moment of shooting. Off Deactivates image stabilization. * The setting is changed to [Continuous] for movie recording.
ç Contents 5 Playback Mode Have fun reviewing your shots, and browse or edit them in many ways • To prepare the camera for these operations, press the <1> button to enter Playback mode. • It may not be possible to play back or edit images that were renamed or already edited on a computer, or images from other cameras. Viewing...............................148 Browsing and Filtering Images...............................154 Image Viewing Options.....157 Protecting Images.............163 Erasing Images.
ç Contents Viewing 148 ç Chapter Contents Still Images Movies After shooting images or movies, you can view them on the screen as follows. 1 Enter Playback mode. zz Press the <1> button. XX Your last shot is displayed. 2 Browse through your images. zz To view the previous image, press the button. To view the next image, press the button.
ç Contents ç Chapter Contents 149 zz To access Scroll Display mode, press and hold the buttons for at least one second. In this mode, press the buttons to browse through images. Images appear grainy at this time. zz To return to single-image display, press the button. zz To browse images grouped by shooting date, press the buttons in Scroll Display mode. zz Movies are identified by a ] icon. To play movies, go [ to step 3. 3 Play movies.
ç Chapter Contents ç Contents 150 4 Adjust the volume. zz Press the buttons to adjust the volume. Even after the volume indicator disappears, you can adjust the volume by pressing the buttons. Volume Indicator 5 Pause playback. zz To pause or resume playback, press the button. XX After the movie is finished, [ ] is displayed. • To switch to Shooting mode from Playback mode, press the shutter button halfway.
ç Contents 151 ç Chapter Contents Still Images Movies Switching Display Modes Press the
button to view other information on the screen, or to hide the information. For details on the information displayed, see “Playback (Detailed Information Display)” (= 299).
ç Chapter Contents ç Contents Still Images Movies Histogram High Low Dark Bright zz The graph in detailed information display (= 151) is a histogram showing the distribution of brightness in the image. The horizontal axis represents the degree of brightness, and the vertical axis, how much of the image is at each level of brightness. Viewing the histogram is a way to check exposure.
ç Chapter Contents ç Contents ELPH 130 IS IXUS 140 ELPH 120 IS IXUS 135 Still Images Movies GPS Information Display zz Using a smartphone connected to the camera via Wi-Fi (= 208), you can geotag images on the camera, adding information such as latitude, longitude, and elevation. Geotagged images are labeled with a [ ] icon in detailed information display. Press the button to view the information recorded.
ç Contents ç Chapter Contents Browsing and Filtering Images Still Images 154 Movies Navigating Through Images in an Index By displaying multiple images in an index, you can quickly find the images you are looking for. 1 Display images in an index. zz Move the zoom lever toward to display images in an index. Moving the lever again will increase the number of images shown. zz To display fewer images, move the zoom lever toward . Fewer images are shown each time you move the lever.
ç Contents 155 ç Chapter Contents Still Images Movies Finding Images Matching Specified Conditions Find desired images quickly on a memory card full of images by filtering image display according to your specified conditions. You can also protect (= 163) or delete (= 168) these images all at once. People Displays images with detected faces. Shot Date Displays the images shot on a specific date. Favorites Displays images tagged as favorites (= 176).
ç Contents ç Chapter Contents 156 2 View the filtered images. zz Images matching your conditions are displayed in yellow frames. To view only these images, press the buttons. zz To cancel filtered display, choose [ ] in step 1. • When the camera has found no corresponding images for some conditions, those conditions will not be available.
ç Chapter Contents ç Contents Image Viewing Options 157 Still Images Magnifying Images 1 Magnify an image. zz Moving the zoom lever toward Approximate Position of Displayed Area will zoom in and magnify ] is the image, and [ displayed. You can magnify images up to about 10x by continuing to hold the zoom lever. zz To zoom out, move the zoom lever toward . You can return to single-image display by continuing to hold it.
ç Contents ç Chapter Contents 2 Move the display 158 position and switch images as needed. zz To move the display position, press the buttons. zz While [ ] is displayed, ] by you can switch to [ pressing the button. To switch to other images while zoomed, press the buttons. Press the button again to restore the original setting. • You can return to single-image display from magnified display by pressing the button.
ç Chapter Contents ç Contents Still Images Movies Viewing Slideshows Automatically play back images from a memory card as follows. Each image is displayed for about three seconds. Choose a slideshow transition and start playback. zz Press the button, choose [.] in the menu, and choose the desired option (= 61). XX The slideshow will start a few seconds after [Loading image] is displayed. zz Press the button to stop the slideshow.
ç Contents ç Chapter Contents 160 Changing Slideshow Settings You can set up slideshows to repeat, and you can change the transitions between images and the display duration of each image. 1 Access the setting screen. zz Press the button, and then choose [Slideshow] on the [1] tab (= 159). 2 Configure the settings. zz Choose a menu item to configure, and then choose the desired option (= 63). zz To start the slideshow with your settings, choose [Start] and press the button.
ç Contents ç Chapter Contents 161 Still Images Auto Playback of Similar Images (Smart Shuffle) Based on the current image, the camera offers four images similar to it that you may wish to view. After you choose to view one of those images, the camera offers four more images. This is an enjoyable way to play back images in an unexpected order. Try this feature after you have taken many shots, in many kinds of scenes. 1 Choose Smart Shuffle.
ç Contents ç Chapter Contents 162 • Only still images shot with this camera are played back using Smart Shuffle.
ç Contents 163 ç Chapter Contents Still Images Protecting Images Movies Protect important images to prevent accidental erasure by the camera (= 168). zz Press the button, and then choose [:] in the menu (= 61). [Protected] is displayed. zz To cancel protection, repeat this process and choose [:] again, and then press the button. • Protected images on a memory card will be erased if you format the card (= 250, 251). • Protected images cannot be erased using the camera’s erasure function.
ç Contents ç Chapter Contents 164 2 Choose a selection method. zz Choose a menu item and a setting as desired (= 63). zz To return to the menu screen, press the button. Choosing Images Individually 1 Choose [Select]. zz Following step 2 in “Using the Menu” (= 164), choose [Select] and press the button. 2 Choose an image. zz Press the buttons to choose an image, and then press the button. [ ] is displayed. zz To cancel selection, press the button again.
ç Chapter Contents ç Contents 165 3 Protect the image. zz Press the button. A confirmation message is displayed. zz Press the buttons to choose [OK], and then press the button. • Images will not be protected if you switch to Shooting mode or turn the camera off before finishing the setup process in step 3. Selecting a Range 1 Choose [Select Range]. zz Following step 2 in “Using the Menu” (= 164), choose [Select Range] and press the button. 2 Choose a starting image.
ç Contents ç Chapter Contents 166 zz Press the buttons to choose an image, and then press the button. 3 Choose an ending image. zz Press the button to choose [Last image], and then press the button. zz Press the buttons to choose an image, and then press the button. zz Images before the first image cannot be selected as the last image. 4 Protect the images. zz Press the button to choose [Protect], and then press the button.
ç Contents ç Chapter Contents 167 Specifying All Images at Once 1 Choose [Select All Images]. zz Following step 2 in “Using the Menu” (= 164), choose [Select All Images] and press the button. 2 Protect the images. zz Press the buttons to choose [Protect], and then press the button. • To cancel protection for groups of images, choose [Unlock] in step 4 of “Selecting a Range” or in step 2 of “Specifying All Images at Once”.
ç Chapter Contents ç Contents Erasing Images Still Images Movies You can choose and erase unneeded images one by one. Be careful when erasing images, because they cannot be recovered. However, protected images (= 163) cannot be erased. 1 Choose an image to erase. zz Press the buttons to choose an image. 2 Erase the image. zz Press the button, and then choose [a] in the menu (= 61).
ç Chapter Contents ç Contents 169 Erasing All Images You can erase all images at once. Be careful when erasing images, because they cannot be recovered. However, protected images (= 163) cannot be erased. Choosing a Selection Method 1 Access the setting screen. zz Press the button, and then choose [Erase] on the [1] tab (= 63). 2 Choose a selection method. zz Choose a menu item and a setting as desired (= 63).
ç Contents ç Chapter Contents 170 Choosing Images Individually 1 Choose [Select]. zz Following step 2 in “Choosing a Selection Method” (= 169), choose [Select] and press the button. 2 Choose an image. zz Once you choose an image following step 2 in “Choosing Images Individually” (= 164), [ ] is displayed. zz To cancel selection, press the button again. [ ] is no longer displayed. zz Repeat this process to specify other images. 3 Erase the image. zz Press the button.
ç Contents Selecting a Range ç Chapter Contents 171 1 Choose [Select Range]. zz Following step 2 in “Choosing a Selection Method” (= 169), choose [Select Range] and press the button. 2 Choose images. zz Follow steps 2 – 3 in “Selecting a Range” (= 165) to specify images. 3 Erase the images. zz Press the button to choose [Erase], and then press the button. Specifying All Images at Once 1 Choose [Select All Images].
ç Contents ç Chapter Contents 172 2 Erase the images. zz Press the buttons to choose [OK], and then press the button.
ç Chapter Contents ç Contents Rotating Images Still Images Movies Change the orientation of images and save them as follows. 1 Choose [\]. zz Press the button, and then choose [\] in the menu (= 61). 2 Rotate the image. zz Press the or button, depending on the desired direction. Each time you press the button, the image is rotated 90°. Press the button to complete the setting.
ç Contents ç Chapter Contents 174 Using the Menu 1 Choose [Rotate]. zz Press the button and choose [Rotate] on the [1] tab (= 63). 2 Rotate the image. zz Press the buttons to choose an image. zz The image is rotated 90° each time you press the button. zz To return to the menu screen, press the button. • Movies with an image quality of [ ] cannot be rotated. • Rotation is not possible when [Auto Rotate] is set to [Off] (= 175).
ç Contents ç Chapter Contents 175 Deactivating Auto Rotation Follow these steps to deactivate automatic rotation by the camera, which rotates images shot in vertical orientation so they are displayed vertically on the camera. zz Press the button, choose [Auto Rotate] on the [1] tab, and then choose [Off] (= 63). • Images cannot be rotated (= 173) when you set [Auto Rotate] to [Off]. Additionally, images already rotated will be displayed in the original orientation.
ç Chapter Contents ç Contents Image Categories You can organize images by tagging them as favorites. By choosing a category in filtered playback, you can restrict the following operations to all of those images.
ç Contents ç Chapter Contents 177 2 Choose an image. zz Press the buttons to choose an image, and then press the button. [ ] is displayed. zz To untag the image, press the button again. [ ] is no longer displayed. zz Repeat this process to choose additional images. 3 Finish the setup process. zz Press the button. A confirmation message is displayed. zz Press the buttons to choose [OK], and then press the button.
ç Contents ç Chapter Contents Editing Still Images 178 • Image editing (= 178 – 184) is only available when the memory card has sufficient free space. Still Images Resizing Images Save a copy of images at a lower resolution. 1 Choose [Resize]. zz Press the button and choose [Resize] on the [1] tab (= 63). 2 Choose an image. zz Press the buttons to choose an image, and then press the button. 3 Choose an image size.
ç Contents 179 ç Chapter Contents 4 Save the new image. zz Press the buttons to choose [OK], and then press the button. XX The image is now saved as a new file. 5 Review the new image. zz Press the button. [Display new image?] is displayed. zz Press the buttons to choose [Yes], and then press the button. XX The saved image is now displayed. • Editing is not possible for images saved as [ • Images cannot be resized to a higher resolution. ] in step 3.
ç Contents ç Chapter Contents 180 Still Images Cropping You can specify a portion of an image to save as a separate image file. 1 Choose [Cropping]. zz Press the button, and then choose [Cropping] on the [1] tab (= 63). 2 Choose an image. zz Press the buttons to choose an image, and then press the button.
ç Contents Cropping Area ç Chapter Contents 181 3 Adjust the cropping area. XX A frame is displayed around Preview of Image After Cropping Resolution After Cropping the portion of the image to be cropped. XX The original image is shown in the upper left, and a preview of the image as cropped is shown in the lower right. zz To resize the frame, move the zoom lever. zz To move the frame, press the buttons. zz To change the frame orientation, press the button. zz Press the button.
ç Contents ç Chapter Contents 182 Still Images Changing Image Color Tones (My Colors) You can adjust image colors and then save the edited image as a separate file. For details on each option, see “Changing Image Color Tones (My Colors)” (= 128). 1 Choose [My Colors]. zz Press the button, and then choose [My Colors] on the [1] tab (= 63). 2 Choose an image. zz Press the buttons to choose an image, and then press the button. 3 Choose an option.
ç Contents ç Chapter Contents 183 • The color of images edited using this function may vary slightly from the color of images shot using My Colors (= 128). Still Images Correcting Image Brightness (i-Contrast) Excessively dark image areas (such as faces or backgrounds) can be detected and automatically adjusted to the optimal brightness. Insufficient overall image contrast is also automatically corrected, to make subjects stand out better.
ç Chapter Contents ç Contents 184 • For some images, correction may be inaccurate or may cause images to appear grainy. • Images may look grainy after repeated editing using this function. • If [Auto] does not produce the expected results, try correcting images using [Low], [Medium], or [High]. Still Images Correcting Red-Eye Automatically corrects images affected by red-eye. You can save the corrected image as a separate file. 1 Choose [Red-Eye Correction].
ç Contents ç Chapter Contents 3 Correct the image. 185 zz Press the button. XX Red-eye detected by the camera is now corrected, and frames are displayed around corrected image areas. zz Enlarge or reduce images as needed. Follow the steps in = 157. 4 Save as a new image and review. zz Press the buttons to choose [New File], and then press the button. XX The image is now saved as a new file. zz Follow step 5 in “Resizing Images” (= 179).
ç Chapter Contents ç Contents Movies Editing Movies You can cut movies to remove unneeded portions at the beginning or end. 1 Choose [*]. zz Following steps 1 – 5 in “Viewing” (= 148), choose [*] and press the button. XX The movie editing panel and editing bar are now displayed. Movie Editing Panel 2 Specify portions to cut. zz Press the buttons to choose [ ] or [ ].
ç Contents ç Chapter Contents 187 zz Even if you move [ ] to a position other than a [ ] mark, choosing [ ] will only cut the portion from the nearest [ ] to the left, and choosing [ ] will cut the portion from the nearest [ ] to the right. 3 Review the edited movie. zz Press the buttons to choose [ ], and then press the button. The edited movie is now played. zz To edit the movie again, repeat step 2. zz To cancel editing, press the buttons to choose [ ].
ç Contents ç Chapter Contents 188 zz Press the buttons to choose [New File], and then press the button. XX The movie is now saved as a new file. • To overwrite the original movie with the cut one, choose [Overwrite] in step 4. In this case, the original movie will be erased. • [Overwrite] is only available when memory cards lack sufficient free space. • Movies may not be saved if the battery runs out while saving is in progress.
ç Contents 6 ELPH 130 IS IXUS 140 ELPH 120 IS IXUS 135 Wi-Fi Functions Use Wi-Fi functions to send images from the camera to a variety of compatible devices, and use the camera with Web services What You Can Do With Wi-Fi..................................190 Using Wi-Fi to Send Images From the Camera..............192 Wi-Fi (Wireless LAN) Precautions.......................193 Security Precautions.........196 Glossary.............................198 Registering a Camera Nickname (First time only)...
ç Contents ç Chapter Contents What You Can Do With Wi-Fi 190 This camera is an approved Wi-Fi®* product. You can wirelessly connect to and send images to the following devices. Note that, in this chapter, wireless LAN functions other than Wi-Fi may be referred to as Wi-Fi. * Wi-Fi is a brand name that indicates interoperability certification of Wi-Fi devices. Connecting to Web Services CANON iMAGE GATEWAY is an online photo service available to those who have purchased this product.
ç Contents ç Chapter Contents 191 Connecting to a Computer Use the software to wirelessly send images from the camera to a computer. Refer to the Software Guide for details. Connecting to a Printer Send images wirelessly to a PictBridge-compatible printer (supporting DPS over IP) to print them.
ç Chapter Contents ç Contents Using Wi-Fi to Send Images From the Camera Operation Device Preparations Registering a camera nickname (= 200) ○ ○ ○ ○ ○ Installing the software (= 35)*1 ○ – – ○ – Adjusting settings for using Web services from CANON iMAGE GATEWAY (= 202) ○ – – – – Installing the dedicated application on the smartphone (= 208) – ○ – – – Connection Establishing a connection with the camera Send/Print/ Import Sending images (= 230) ○ ○ ○ ○ ○ (= 202) (= 2
ç Contents ç Chapter Contents 193 Wi-Fi (Wireless LAN) Precautions • The model number is ELPH 130 IS IXUS 140 PC1889 / ELPH 120 IS IXUS 135 PC1896 (including WLAN module model WM218). To identify your model, check the label on the bottom of the camera for a number beginning with PC. • Countries and Regions Permitting WLAN Use - Use of WLAN is restricted in some countries and regions, and illegal use may be punishable under national or local regulations.
ç Contents ç Chapter Contents 194 • Be sure to make notes of the wireless LAN settings you use. The wireless LAN settings saved to this product may be erased due to incorrect operation of the product, the effects of radio waves or static electricity, accident or malfunction. Be sure to make notes of wireless LAN settings as a precaution. Please note that Canon accepts no responsibility for degradation of content, direct or indirect damages or loss of revenue arising from use of the product.
ç Contents ç Chapter Contents 195 Radio Wave Interference Precautions • This product may receive interference from other devices that emit radio waves. To avoid interference, be sure to use this product as far away as possible from such devices, or avoid using the devices at the same time as this product.
ç Contents ç Chapter Contents Security Precautions 196 Because Wi-Fi uses radio waves to transmit signals, security precautions more stringent than when using a LAN cable are required. Keep the following points in mind when using Wi-Fi. • Only use networks you are authorized to use. This product searches for Wi-Fi networks in the vicinity and displays the results on the screen. Networks you are not authorized to use (unknown networks) may also be displayed.
ç Contents ç Chapter Contents 197 Only use this camera’s Wi-Fi function with a proper understanding of Wi-Fi security, and balance risk and convenience when adjusting security settings.
ç Contents Glossary ç Chapter Contents 198 Wi-Fi related terms are explained here. Also refer to the explanations of terms given in the respective sections of this guide. • Access point A device that relays radio wave signals to create a Wi-Fi network. This term also refers to a network that you can use to connect to the Internet via Wi-Fi. • Firewall This is a system that protects networks from computer viruses, external unauthorized access, and security threats.
ç Contents ç Chapter Contents 199 The camera can print to PictBridge-compatible printers via Wi-Fi. PictBridge technical standards make it easy to connect digital cameras, printers, and other devices directly. Additionally, a new standard called DPS over IP enables PictBridge connections in network environments, and the camera is also compatible with this standard.
ç Contents ç Chapter Contents 200 Registering a Camera Nickname (First time only) To start with, register a camera nickname. This nickname will be displayed on the screen of target devices when connecting to other devices via Wi-Fi. 1 Access the Wi-Fi menu. zz Press the <1> button to turn the camera on. zz Press the button. 2 Access the keyboard. zz Press the button. 3 Enter a nickname. zz Press the buttons to choose a character, and then press the button to enter it.
ç Contents ç Chapter Contents 201 zz Choose [ ] and press the button. The previous character will be deleted. 4 Save the settings. zz Press the button, press the buttons to choose [OK], and then press the button. • When connecting wirelessly to any device other than a computer, a memory card must be inserted in the camera. Additionally, the memory card must contain images in order for you to access Web services or connect to a smartphone or printer wirelessly.
ç Contents ç Chapter Contents Connecting to Web Services 202 Set up the camera to use a variety of Web services as follows. Adjusting Settings for Using Web Services From CANON iMAGE GATEWAY Adjust account settings for the Web services you want to use. • A computer is required for Web service settings, starting with CANON iMAGE GATEWAY. • Because CameraWindow is used to adjust settings, be sure to install it from the included CD-ROM beforehand (= 38).
ç Contents ç Chapter Contents zz You must have an account 203 with Web services other than CANON iMAGE GATEWAY if you desire to use them. For further details, check the websites for each Web service you want to register. 2 Connect the camera to a computer with the interface cable (= 39). zz On a computer running Windows, there is no need to connect the interface cable if you complete settings in advance (= 217). In this case, you can connect via Wi-Fi. 3 Display CameraWindow (= 41).
ç Contents ç Chapter Contents 204 5 Login to CANON iMAGE GATEWAY. zz Enter your CANON iMAGE GATEWAY login name and password, and then click [Login]. 6 Set a Web service you want to use. zz Follow the on-screen instructions to complete settings for Web services you want to use. zz Once the Web service settings are complete, click [Finish] at the bottom of the window to close it. 7 Apply Web service settings to the camera.
ç Contents ç Chapter Contents 205 zz Click [o] or [p] to change the order of the Web services that will be displayed in the camera’s Wi-Fi menu. zz After you finish adjusting settings in the [Camera] list to your liking, close the window. XX The settings of Web services and for transferring images via the server are applied to the camera.
ç Contents ç Chapter Contents 206 Connecting to Web Services Connect to Web services registered to the camera. 1 Access the Wi-Fi menu. zz Press the button. 2 Choose a Web service. zz Press the buttons to choose the icon of the Web service that you want to connect to, and then press the button. zz If the Web service has multiple recipients, select the desired recipient on the [Select Recipient] screen, and press the button. 3 Connect to an access point.
ç Contents ç Chapter Contents 207 XX When you have connected to the Web service, the image transfer screen will be displayed. Proceed to “Sending Images” (= 230). However, when [Send via Server] is selected, images will be sent as soon as a connection is established (= 234). • When you are in the vicinity of an access point that you have previously connected to, the camera will automatically connect to it in step 2.
ç Contents ç Chapter Contents Connecting to a Smartphone 208 When establishing a Wi-Fi connection with a smartphone, you can either use the camera as an access point (Camera Access Point mode) or use another access point. Follow these instructions when using the camera as an access point. When using another access point, see Connecting to Access Points in the List (= 222).
ç Contents ç Chapter Contents 209 3 Register the smartphone name. zz On the smartphone, start CameraWindow and enter a name for the smartphone that will be displayed on the camera. • For details on this application (supported smartphones and included functions), refer to the Canon website. Establishing the Smartphone Connection 1 Access the Wi-Fi menu. zz Press the button. 2 Choose a smartphone. zz Press the buttons to choose [ ], and then press the button.
ç Contents ç Chapter Contents 210 XX The camera’s SSID and encryption key are displayed on the screen. 4 Use the smartphone to connect to the network displayed on the camera screen. zz Choose the displayed SSID (network name) from the smartphone’s Wi-Fi setting menu. zz Enter the encryption key displayed on the camera screen into the password field on the smartphone. 5 Start CameraWindow on the smartphone.
ç Contents ç Chapter Contents 211 6 Choose a smartphone to connect to. zz Press the buttons to choose the smartphone for the connection (= 209), and then press the button. 7 Adjust the privacy settings. zz Press the buttons to choose [Yes], and then press the button. XX You can now use the smartphone to receive images sent from the camera, or to geotag images on the camera (= 236).
ç Contents ç Chapter Contents 212 • When you are in the vicinity of an access point that you have previously connected to, the camera will automatically connect to it in step 3. To change access points, select [Switch Network] from the screen that will be displayed when the connection is being established, and follow steps 4 – 5 in “Adding a Computer” (= 219). • All camera images can be viewed from the connected smartphone when you choose [Yes] in step 7.
ç Contents ç Chapter Contents Connecting to Another Camera 213 Connect two cameras via Wi-Fi and send images between them as follows. • Only Canon-brand cameras equipped with a Wi-Fi function can be connected to wirelessly. Even Canon-brand cameras that support Eye-Fi cards cannot be connected to if they do not have a Wi-Fi function. You cannot connect to PowerShot SD430 DIGITAL ELPH WIRELESS/DIGITAL IXUS WIRELESS cameras with this camera. 1 Access the Wi-Fi menu. zz Press the button.
ç Contents ç Chapter Contents 214 XX When the target camera has been added successfully, the image transfer screen will be displayed. Proceed to “Sending Images” (= 230). • After you have accessed the Wi-Fi menu once, you can access it again by pressing the button. The recent target device is listed first, so you can easily connect again by pressing the buttons to choose it.
ç Contents ç Chapter Contents Connecting to a Computer 215 Configure computer settings for the connection, add the computer as a connection destination, and transfer images to the computer wirelessly using the software CameraWindow as follows. • When connected to a computer, the camera is used to establish the connection and then the computer (software CameraWindow) is used to transfer images. Preparing to Register a Computer Prepare to register a computer.
ç Contents ç Chapter Contents 216 Checking Your Wi-Fi Environment To use Wi-Fi, a Wi-Fi base unit (Wi-Fi router, etc.) that acts as your access point must be connected to a computer. Be sure to use a Wi-Fi base unit that conforms to the Wi-Fi standard listed in Specifications (= 319). If you are already using Wi-Fi, confirm the following items and mark each one on the Check sheet. For instructions on checking network settings, refer to the access point user guide.
ç Contents ç Chapter Contents 217 • A router is a device that creates a network (LAN) structure for connecting multiple computers. A router that contains an internal Wi-Fi function is called a “Wi-Fi router”. • This guide refers to all Wi-Fi routers and base stations as “access points”. • If you use MAC address filtering on your Wi-Fi network, be sure to add the camera’s MAC address to your access point.
ç Contents ç Chapter Contents 218 • The following Windows settings are configured when you run the utility in step 2. - Turn on media streaming. This will enable the camera to find the computer to access via Wi-Fi. - Turn on network discovery. This will enable the computer to find the camera. - Turn on ICMP (Internet Control Message Protocol). This allows you to check the network connection status. - Enable Universal Plug & Play (UPnP). This will enable network devices to detect each other automatically.
ç Contents ç Chapter Contents 219 1 Access the Wi-Fi menu. zz Press the button. 2 Choose a computer. zz Press the buttons to choose [ ], and then press the button. 3 Choose [Add a Device]. zz Press the buttons to choose [Add a Device], and then press the button. XX A list of detected access points will be displayed in the [Select Network] screen. 4 Choose [WPS Connection]. zz Press the buttons to choose [WPS Connection], and then press the button.
ç Contents ç Chapter Contents 220 5 Choose [PBC Method]. zz Press the buttons to choose [PBC Method], and then press the button. 6 Establish the connection. zz On the access point, hold down the WPS connection button for a few seconds. zz On the camera, press the button. XX The camera will connect to the access point. XX A list of computers connected to the access point will appear in the [Select a Device] screen. 7 Choose a computer to connect to.
ç Contents ç Chapter Contents 221 8 Install a driver (first Windows connection only). zz When the screen at left is displayed, click the Start menu on the computer, click [Control Panel], and then click [Add a device]. zz Double click the connected camera icon. XX Driver installation will begin. XX After driver installation is complete, and the camera and computer connection is enabled, the AutoPlay screen will be displayed. Nothing will be displayed on the camera screen.
ç Contents ç Chapter Contents 222 • You can connect to computers that you have already connected to by choosing them on the [Select a Device] screen in step 3. • If you chose [PIN Method] in step 5, a PIN code will be displayed on the screen. Be sure to set this code in the access point. Choose a device in the [Select a Device] screen. For further details, refer to the user guide included with your access point. • To add multiple computers, repeat the above procedures starting from step 1.
ç Contents ç Chapter Contents 223 2 Choose an access point. zz Press the buttons to choose a network (access point), and then press the button. 3 Enter the access point’s encryption key. zz Press the button to access the keyboard, and then enter the encryption key (= 200). zz Press the buttons to choose [Next], and then press the button. 4 Choose [Auto]. zz Press the buttons to choose [Auto], and then press the button.
ç Contents ç Chapter Contents zz Choose the computer to 224 connect to, following steps 7 – 8 in “Adding a Computer” (= 220). The computer is now added to the list. • For information on the access point’s encryption key, refer to the body of the access point or its user manual. • Up to 16 access points will be displayed. If no access points are detected, choose [Manual Settings] in step 2 to manually set an access point.
ç Contents ç Chapter Contents 225 Using CameraWindow to Transfer Images to a Computer Use the computer (software CameraWindow) to transfer images from the camera to the computer. • For details on how to use CameraWindow, see the Software Guide (= 36). 1 Display CameraWindow. zz In Windows, click [Downloads Images From Canon Camera using Canon CameraWindow]. XX CameraWindow will be displayed.
ç Contents ç Chapter Contents 226 2 Import images. zz Click [Import Images from Camera], and then click [Import Untransferred Images]. XX Images are now saved to the Pictures folder on the computer, in separate folders named by date. zz Click [OK] in the screen that is displayed after image import is complete. • If CameraWindow is not displayed when using a Macintosh computer, click the [CameraWindow] icon in the Dock. • Movies will take longer to import since the file size is larger than still images.
ç Contents ç Chapter Contents Connecting to a Printer 227 Connect the camera to a printer via Wi-Fi to print as follows. When establishing a Wi-Fi connection with a printer, you can either use the camera as an access point (Camera Access Point mode) or use another access point. Follow these instructions when using the camera as an access point. When using another access point, see Connecting to Access Points in the List (= 222) in “Adding a Computer”. 1 Access the Wi-Fi menu. zz Press the button.
ç Contents ç Chapter Contents 228 4 Use the printer to connect to the network displayed on the camera screen. zz Choose the displayed SSID (network name) from the printer’s Wi-Fi setting menu. zz Enter the encryption key displayed on the camera screen into the password field on the printer. 5 Choose the printer. zz Once the printer is ready for the connection, press the button when the printer name is displayed on the camera.
ç Contents ç Chapter Contents 229 zz Press the buttons to choose [Print], and then press the button. XX Printing now begins. zz For detailed printing instructions, see “Printing Images” (= 265). • When you are in the vicinity of an access point that you have previously connected to, the camera will automatically connect to it in step 3.
ç Chapter Contents ç Contents Sending Images 230 Send images wirelessly to destinations registered on the camera as follows. • Images can be uploaded to social networking services or sent to email addresses, via CANON iMAGE GATEWAY. For details, refer to the CANON iMAGE GATEWAY website. • Up to 50 images can be sent together at once. You can send movies together as long as the total playback time is within two minutes.
ç Contents ç Chapter Contents 231 2 Choose images. zz Press the buttons to choose an image to send, and then press the button. [ ] is displayed. zz To cancel selection, press the button again. [ ] is no longer displayed. zz Repeat this process to choose additional images. zz After you finish choosing images, press the button. 3 Send the images. zz Press the buttons to choose [ ], and then press the button.
ç Contents ç Chapter Contents 232 XX Image transfer will begin. The screen darkens during image transfer. XX After images are uploaded to a Web service, [OK] is displayed. Press the button to return to the playback screen. XX After sending images to a camera or smartphone, [Transfer completed] will be displayed, and the display will return to the image transfer screen. • Keep your fingers or other objects off the Wi-Fi transmitter-receiver.
ç Chapter Contents ç Contents 233 Adding Comments Using the camera, you can add comments (alphanumeric characters and symbols) to images that you send to email addresses, social networking services, etc. The number of characters and symbols that can be entered may differ depending on the Web service. 1 Choose [ ]. zz Press the buttons to choose [ ], and then press the button. 2 Add a comment.
ç Contents ç Chapter Contents Sending Images to a Computer via CANON iMAGE GATEWAY 234 Images on the memory card that have not been transferred already can be sent to a computer via CANON iMAGE GATEWAY. If the computer that you intend to send images to is turned off, the images will be stored temporarily on the CANON iMAGE GATEWAY server. However, the images will be deleted after a while. Start up the computer so that they can be saved.
ç Contents ç Chapter Contents 235 XX Once the connection is established, the images are sent. (The screen will close in about one minute.) XX After the images are sent, [OK] is displayed. Press the button to return to the playback screen. XX When the images have been sent successfully to the CANON iMAGE GATEWAY server, [ ] is displayed on the screen. 3 Turn on the computer. zz Images are automatically saved to the computer when you turn it on.
ç Contents ç Chapter Contents Geotagging Images on the Camera 236 GPS data recorded on a smartphone using the dedicated CameraWindow application (= 208) can be added to images on the camera. Images are tagged with information including the latitude, longitude, and elevation. • Before shooting, make sure the date and time and your home time zone are set correctly. (See Setting the Date and Time (= 24).
ç Contents ç Chapter Contents 237 Editing or Erasing Wi-Fi Settings Edit or erase Wi-Fi settings as follows. Editing Connection Information Edit connection information saved to the camera. You can change device nicknames (display names) that are displayed on the camera, and erase connection information. The following explains the procedure when the target device is a computer. 1 Access the Wi-Fi menu. zz Pressing the button will show recent target devices.
ç Chapter Contents ç Contents 4 Choose a device to edit. zz Press the buttons to choose the device to edit, and then press the button. 5 Choose an option to edit. zz Press the buttons to choose an option to edit, and then press the button. zz The settings you can change depend on what device or service the camera will access.
ç Contents ç Chapter Contents 239 Changing a Device Nickname You can change the device nickname (display name) that is displayed on the camera. Change the nickname. zz Following step 5 in “Editing Connection Information” (= 238), choose [Change Device Nickname] and press the button. zz Select the input field and press the button. Use the keyboard displayed to enter a new nickname (= 200).
ç Contents ç Chapter Contents 240 2 Choose the connection information to erase. zz After [Erase?] is displayed, press the buttons to choose [OK], and then press the button. XX The selected connection information will be erased. Returning the Wi-Fi Settings to Default Return the Wi-Fi settings to default if you transfer ownership of the camera to another person, or dispose of it. 1 Choose [Wi-Fi Settings]. zz Press the button, and then choose [Wi-Fi Settings] on the [3] tab (= 63).
ç Contents ç Chapter Contents 241 3 Restore the default settings. zz Press the buttons to choose [OK], and then press the button. XX The Wi-Fi settings are now reset. • When returning the Wi-Fi settings to defaults, all Web services set using a computer will also be erased from the camera. Be sure that you want to reset all Wi-Fi settings before using this option.
ç Contents 242 7 Setting Menu Customize or adjust basic camera functions for greater convenience Adjusting Basic Camera Functions...........................
ç Contents ç Chapter Contents 243 Adjusting Basic Camera Functions Functions can be configured on the [3] tab. Customize commonly used functions as desired, for greater convenience (= 63). Silencing Camera Operations Silence camera sounds and movies as follows. zz Choose [Mute], and then choose [On]. • Operation can also be silenced by holding down the
button as you turn the camera on. • Sound is not played during movies if you mute camera sounds (= 148).
ç Chapter Contents ç Contents 244 Adjusting the Volume Adjust the volume of individual camera sounds as follows. zz Choose [Volume], and then press the button. zz Choose an item, and then press the buttons to adjust the volume. Hiding Hints and Tips Hints and tips are normally shown when you choose FUNC. menu (= 61) or Menu (= 63) items. If you prefer, you can deactivate this information. zz Choose [Hints & Tips], and then choose [Off].
ç Chapter Contents ç Contents 245 Date and Time Adjust the date and time as follows. zz Choose [Date/Time], and then press the button. zz Press the buttons to choose an item, and then press the buttons to adjust the setting. World Clock To ensure that your shots will have the correct local date and time when you travel abroad, simply register the destination in advance and switch to that time zone. This convenient feature eliminates the need to change the Date/Time setting manually.
ç Contents ç Chapter Contents 246 zz To set daylight saving time (1 hour ahead), press the buttons to choose [ ]. zz Press the button. 2 Switch to the destination time zone. zz Press the buttons to choose [ World], and then press the button. XX [ ] is now shown on the shooting screen (= 297). • Adjusting the date or time while in [ ] mode (= 24) will Home] time and date.
ç Contents ç Chapter Contents 247 Using Eco Mode This function allows you to conserve battery power in Shooting mode. When the camera is not in use, the screen quickly darkens to reduce battery consumption. 1 Configure the setting. zz Choose [Eco Mode], and then choose [On]. XX [ ] is now shown on the shooting screen (= 297). XX The screen darkens when the camera is not used for approximately two seconds; approximately ten seconds after darkening, the screen turns off.
ç Contents ç Chapter Contents 248 Power-Saving Adjustment Adjust the timing of automatic camera and screen deactivation (Auto Power Down and Display Off, respectively) as needed (= 58). zz Choose [Power Saving], and then press the button. zz After choosing an item, press the buttons to adjust it as needed. • To conserve battery power, you should normally choose [On] for [Auto Power Down] and [1 min.] or less for [Display Off].
ç Chapter Contents ç Contents 249 Screen Brightness Adjust screen brightness as follows. zz Choose [LCD Brightness], and then press the buttons to adjust the brightness. • For maximum brightness, press and hold the button for at least one second when the shooting screen is displayed or when in single-image display. (This will override the [LCD Brightness] setting on the [3] tab.
ç Contents ç Chapter Contents 250 Formatting Memory Cards Before using a new memory card or a card formatted in another device, you should format the card with this camera. Formatting erases all data on a memory card. Before formatting, copy images on the memory card to a computer, or take other steps to back them up. 1 Access the [Format] screen. zz Choose [Format], and then press the button. 2 Choose [OK].
ç Contents ç Chapter Contents 251 • Formatting or erasing data on a memory card only changes file management information on the card and does not erase the data completely. When transferring or disposing of memory cards, take steps to protect personal information if necessary, as by physically destroying cards. • The total card capacity indicated on the formatting screen may be less than the advertised capacity.
ç Contents ç Chapter Contents 252 • Low-level formatting takes longer than Formatting Memory Cards (= 250), because data is erased from all storage regions of the memory card. • You can cancel low-level formatting in progress by choosing [Stop]. In this case, all data will be erased, but the memory card can be used normally. File Numbering Your shots are automatically numbered in sequential order (0001 – 9999) and saved in folders that store up to 2,000 images each.
ç Chapter Contents ç Contents 253 Date-Based Image Storage Instead of saving images in folders created each month, you can have the camera create folders each day you shoot to store shots taken that day. zz Choose [Create Folder], and then choose [Daily]. XX Images will now be saved in folders created on the shooting date.
ç Contents ç Chapter Contents 254 Checking Certification Logos Some logos for certification requirements met by the camera can be viewed on the screen. Other certification logos are printed in this guide, on the camera packaging, or on the camera body. zz Choose [Certification Logo Display], and then press the button. Display Language Change the display language as needed. zz Choose [Language ], and then press the button.
ç Chapter Contents ç Contents 255 Adjusting Other Settings The following settings can also be adjusted on the [3] tab. • [Video System] (= 260) • [Wi-Fi Settings] (= 189) Restoring Defaults If you accidentally change a setting, you can restore default camera settings. zz Choose [Reset All], and then press the button. zz Press the buttons to choose [OK], and then press the button. XX Default settings are now restored. • The following functions are not restored to default settings.
ç Contents 8 Accessories Enjoy the camera in more ways with optional Canon accessories and other compatible accessories sold separately Optional Accessories........257 Using Optional Accessories......................260 Printing Images.................
ç Contents ç Chapter Contents Optional Accessories 257 The following camera accessories are sold separately. Note that availability varies by area, and some accessories may no longer be available. Power Supplies Battery Pack NB-11L zz Rechargeable lithium-ion battery Battery Charger CB-2LF/CB-2LFE zz Charger for Battery Pack NB-11L • CB-2LD and CB-2LDE are also supported. • The battery includes a convenient cover which you can attach to know the charging status at a glance.
ç Chapter Contents ç Contents 258 • The battery charger and AC adapter kit can be used in areas with 100 – 240 V AC power (50/60 Hz). • For power outlets in a different format, use a commercially available adapter for the plug. Never use an electrical transformer designed for traveling, which may damage the battery. Flash Unit High-Power Flash HF-DC2 zz External flash for illuminating subjects that are out of range of the built-in flash. High-Power Flash HF-DC1 can also be used.
ç Contents ç Chapter Contents 259 Printers anon-brand PictBridgeC Compatible Printers zz Printing images without a computer is possible by connecting the camera to a Canon-brand PictBridgecompatible printer. For details, visit your nearest Canon dealer.
ç Chapter Contents ç Contents Still Images Movies Still Images Movies Using Optional Accessories Playback on a TV Connecting the camera to a TV with the AV Cable AVC-DC400 (sold separately) enables you to view your shots on the larger screen of the TV as you control the camera. For details on connection or how to switch inputs, refer to the TV manual. • Some information may not be displayed on the TV (= 299). 1 Make sure the camera and TV are off.
ç Contents ç Chapter Contents 261 3 Turn the TV on and switch to video input. zz Switch the TV input to the video input you connected the cable to in step 2. 4 Turn the camera on. zz Press the <1> button to turn the camera on. XX Images from the camera are now displayed on the TV. (Nothing is displayed on the camera screen.) zz When finished, turn off the camera and TV before disconnecting the cable.
ç Contents 262 ç Chapter Contents Still Images Movies Powering the Camera with Household Power Powering the camera with AC Adapter Kit ACK-DC90 (sold separately) eliminates the need to monitor the remaining battery level. 1 Make sure the camera is off. 2 Open the cover. zz Follow step 2 in “Inserting the Battery and Memory Card” (= 21) to open the memory card/battery cover, and then open the coupler cable port cover as shown. 3 Insert the coupler.
ç Contents ç Chapter Contents 263 zz Make sure the coupler cable passes through the port. Coupler Cable Port 4 Close the cover. zz Lower the cover ( ) and hold it down as you slide it, until it clicks into the closed position ( ). 5 Connect the power cord. zz Insert the adapter plug into the end of the coupler cable. zz Insert one end of the power cord into the compact power adapter, and then plug the other end into a power outlet. zz Turn the camera on and use it as desired.
ç Contents ç Chapter Contents 264 • Do not disconnect the adapter or unplug the power cord while the camera is still on. This may erase your shots or damage the camera. • Do not attach the adapter or adapter cord to other objects. Doing so could result in malfunction or damage to the product.
ç Chapter Contents ç Contents Printing Images Still Images Movies Your shots can easily be printed by connecting the camera to a printer. On the camera, you can specify images to set up batch printing, prepare orders for photo development services, and prepare orders or print images for photobooks. A Canon SELPHY CP series compact photo printer is used here for the sake of illustration. Screens displayed and available functions vary by printer.
ç Contents ç Chapter Contents 266 2 Connect the camera to the printer. zz Open the cover. Holding the smaller cable plug in the orientation shown, insert the plug fully into the camera terminal. zz Connect the larger cable plug to the printer. For other connection details, refer to the printer manual. 3 Turn the printer on. 4 Turn the camera on. zz Press the <1> button to turn the camera on. 5 Choose an image. zz Press the buttons to choose an image. 6 Access the printing screen.
ç Contents ç Chapter Contents 267 7 Print the image. zz Press the buttons to choose [Print], and then press the button. XX Printing now begins. zz To print other images, repeat steps 5 – 6 after printing is finished. zz When you are finished printing, turn the camera and printer off and disconnect the cable. • For Canon-brand PictBridge-compatible printers (sold separately), see “Printers” (= 259).
ç Chapter Contents ç Contents 268 Still Images Configuring Print Settings 1 Access the printing screen. zz Follow steps 1 – 6 in “Easy Print” (= 265) to access the screen at left. 2 Configure the settings. zz Press the buttons to choose an item, and then press the buttons to choose an option. Default Date File No. Both Off Default Matches current printer settings. Prints images with the date added. Prints images with the file number added.
ç Contents ç Chapter Contents 269 Still Images Cropping Images Before Printing (Cropping) By cropping images before printing, you can print a desired image area instead of the entire image. 1 Choose [Cropping]. zz After following step 1 in “Configuring Print Settings” (= 268) to access the printing screen, choose [Cropping] and press the button. XX A cropping frame is now displayed, indicating the image area to print. 2 Adjust the cropping frame as needed.
ç Contents ç Chapter Contents 270 • Cropping may not be possible at small image sizes, or at some aspect ratios. • Dates may not be printed correctly if you crop images shot with [Date Stamp ] selected. Still Images Choosing Paper Size and Layout Before Printing 1 Choose [Paper Settings]. zz After following step 1 in “Configuring Print Settings” (= 268) to access the printing screen, choose [Paper Settings] and press the button. 2 Choose a paper size.
ç Chapter Contents ç Contents 271 4 Choose a layout. zz Press the buttons to choose an option. zz When choosing [N-up], press the buttons to specify the number of images per sheet. zz Press the button. 5 Print the image. Available Layout Options Default Matches current printer settings. Bordered Prints with blank space around the image. Borderless Borderless, edge-to-edge printing. N-up Choose how many images to print per sheet.
ç Contents ç Chapter Contents 272 Still Images Printing ID Photos 1 Choose [ID Photo]. zz Following steps 1 – 4 in “Choosing Paper Size and Layout Before Printing” (= 270), choose [ID Photo] and press the button. 2 Choose the long and short side length. zz Press the buttons to choose an item. Choose the length by pressing the buttons, and then press the button. 3 Choose the printing area.
ç Chapter Contents ç Contents Movies Printing Movie Scenes 1 Access the printing screen. zz Follow steps 1 – 6 in “Easy Print” (= 265) to choose a movie. The screen at left is displayed. 2 Choose a printing method. zz Press the buttons to choose [ ], and then press the buttons to choose the printing method. 3 Print the image. Movie Printing Options Single Prints the current scene as a still image.
ç Chapter Contents ç Contents 274 Still Images Adding Images to the Print List (DPOF) Batch printing (= 279) and ordering prints from a photo development service can be set up on the camera. Choose up to 998 images on a memory card and configure relevant settings, such as the number of copies, as follows. The printing information you prepare this way will conform to DPOF (Digital Print Order Format) standards.
ç Chapter Contents ç Contents Standard Print Type Date File No. Clear DPOF data 275 One image is printed per sheet. Index Smaller versions of multiple images are printed per sheet. Both Both standard and index formats are printed. On Images are printed with the shooting date. Off – On Images are printed with the file number. Off – On All image print list settings are cleared after printing.
ç Contents ç Chapter Contents 276 Still Images Setting Up Printing for Individual Images 1 Choose [Select Images & Qty.]. zz Press the button, choose [Select Images & Qty.] on the [2] tab, and then press the button. 2 Choose an image. zz Press the buttons to choose an image, and then press the button. XX You can now specify the number of copies. zz If you specify index printing for the image, it is labeled with a [ ] icon.
ç Contents ç Chapter Contents zz Printing quantity cannot be 277 specified for index prints. You can only choose which images to print, by following step 2. zz When finished, press the button to return to the menu screen. Still Images Setting Up Printing for a Range of Images zz Following step 1 in “Setting Up Printing for Individual Images” (= 276), choose [Select Range] and press the button. zz Follow steps 2 – 3 in “Selecting a Range” (= 165) to specify images.
ç Contents ç Chapter Contents 278 Still Images Setting Up Printing for All Images zz Following step 1 in “Setting Up Printing for Individual Images” (= 276), choose [Select All Images] and press the button. zz Press the buttons to choose [OK], and then press the button. Still Images Clearing All Images from the Print List zz Following step 1 in “Setting Up Printing for Individual Images” (= 276), choose [Clear All Selections] and press the button.
ç Contents ç Chapter Contents 279 Still Images Printing Images Added to the Print List (DPOF) zz When images have been added to the print list (= 274 – 278), the screen at left is displayed after you connect the camera to a PictBridge-compatible printer. Press the buttons to choose [Print now], and then simply press the button to print the images in the print list. zz Any DPOF print job that you temporarily stop will be resumed from the next image.
ç Contents ç Chapter Contents 280 Still Images Adding Images to a Photobook Photobooks can be set up on the camera by choosing up to 998 images on a memory card and importing them into the software on your computer, where they are stored in their own folder. This is convenient when ordering printed photobooks online or printing photobooks with your own printer. Choosing a Selection Method zz Press the button, choose [Photobook Set-up] on the [1] tab, and then choose how you will select images.
ç Contents ç Chapter Contents 281 Still Images Adding Images Individually 1 Choose [Select]. zz Following the procedure in “Choosing a Selection Method” (= 280), choose [Select] and press the button. 2 Choose an image. zz Press the buttons to choose an image, and then press the button. XX [ ] is displayed. zz To remove the image from the photobook, press the button again. [ ] is no longer displayed. zz Repeat this process to specify other images.
ç Contents ç Chapter Contents 282 Still Images Adding All Images to a Photobook zz Following the procedure in “Choosing a Selection Method” (= 281), choose [Select All Images] and press the button. zz Press the buttons to choose [OK], and then press the button. Still Images Removing All Images from a Photobook zz Following the procedure in “Choosing a Selection Method” (= 281), choose [Clear All Selections] and press the button.
ç Contents 9 Appendix Helpful information when using the camera Troubleshooting................284 On-Screen Messages........292 On-Screen Information......297 Functions and Menu Tables................................301 Handling Precautions........318 Specifications....................
ç Contents ç Chapter Contents Troubleshooting 284 If you think there is a problem with the camera, first check the following. If the items below do not solve your problem, contact a Canon Customer Support Help Desk. Power Nothing happens when the power button is pressed. • Confirm that the battery is charged (= 19). • Confirm that the battery is inserted facing the correct way (= 22). • Confirm that the memory card/battery cover is fully closed (= 22).
ç Contents ç Chapter Contents 285 Shooting Cannot shoot. • In Playback mode (= 27), press the shutter button halfway (= 59). Strange display on the screen under low light (= 60). Strange display on the screen when shooting. Note that the following display problems are not recorded in still images but are recorded in movies. • The screen may darken under bright light. • The screen may flicker under fluorescent or LED lighting.
ç Contents ç Chapter Contents 286 Shots are out of focus. • Press the shutter button halfway to focus on subjects before pressing it all the way down to shoot (= 59). • Make sure subjects are within focusing range (= 323). • Set [AF-assist Beam] to [On] (= 93). • Confirm that unneeded functions such as macro are deactivated. • Try shooting with focus lock or AF lock (= 138, 141). No AF frames are displayed and the camera does not focus when the shutter button is pressed halfway.
ç Contents ç Chapter Contents 287 White dots or similar image artifacts appear in flash shots. • This is caused by light from the flash reflecting off dust or airborne particles. Shots look grainy. • Lower the ISO speed (= 124). Subjects are affected by red-eye (= 87). • Set [Red-Eye Lamp] to [On] (= 94) to activate the red-eye reduction lamp (= 5) in flash shots.
ç Contents [ ç Chapter Contents 288 ] is displayed and shooting stops automatically. The camera’s internal memory buffer filled up as the camera could not record to the memory card quickly enough. Try one of the following measures. • Use the camera to perform low-level formatting of the memory card (= 251). • Lower the image quality (= 88). • Switch to a memory card that supports high-speed recording (= 322). Zooming is not possible.
ç Chapter Contents ç Contents 289 Computer Cannot transfer images to a computer. When attempting to transfer images to the computer via a cable, try reducing the transfer speed as follows. • Press the <1> button to enter Playback mode. Hold the button down as you press the and buttons at the same time. On the next screen, press the buttons to choose [B], and then press the button.
ç Contents ç Chapter Contents 290 Cannot add a device/destination. • A total of 20 items of connection information can be added to the camera. Erase unneeded connection information from the camera first, and then add new devices/destinations (= 237). • To add Web services to send images to, install CameraWindow and complete the settings in CameraWindow (= 202). • To add a smartphone as a device, first install the dedicated application CameraWindow on your smartphone.
ç Contents ç Chapter Contents 291 Images take a long time to send./The Wi-Fi connection is disrupted. • Multiple images may take a long time to send. Try resizing the image to [ ] or [ ] to reduce sending time (= 231). • Movies may take a long time to send. • Do not use the camera near sources of Wi-Fi signal interference, such as microwave ovens, Bluetooth devices, or other equipment operating on the 2.4 GHz band. Note that images may take a long time to send even when [ ] is displayed.
ç Contents ç Chapter Contents On-Screen Messages 292 If an error message is displayed, respond as follows. No memory card • The memory card may be inserted facing the wrong way. Reinsert the memory card facing the correct way (= 22). Memory card locked • The write-protect tab of the memory card is set to the locked position. Switch the write-protect tab to the unlocked position (= 21). Cannot record! • Shooting was attempted without a memory card in the camera.
ç Contents ç Chapter Contents 293 Cannot magnify!/Cannot play back this content in Smart Shuffle/Cannot rotate/Cannot modify image/Cannot modify/ Cannot assign to category/Unselectable image. • The following functions may be unavailable for images that were renamed or already edited on a computer, or images shot with another camera. Note that starred (*) functions are not available for movies.
ç Contents ç Chapter Contents 294 Lens Error • This error may occur if the lens is held while it is moving, or when the camera is used in dusty or sandy locations. • Frequent display of this error message may indicate camera damage. In this case, contact a Canon Customer Support Help Desk. A camera error was detected (error number) • If this error message is displayed immediately after a shot, the image may not have been saved. Switch to Playback mode to check for the image.
ç Chapter Contents ç Contents ELPH 130 IS Wi-Fi IXUS 140 ELPH 120 IS 295 IXUS 135 Connection failed • No access points were recognized. Check the access point settings (= 218). • A device could not be found. Turn the camera off and on again, and retry the connection. • Check the device you want to connect to and make sure it is ready for connection. Cannot determine access point • The WPS buttons on numerous access points were pressed simultaneously. Try reconnecting again.
ç Contents ç Chapter Contents 296 Sending failed Memory card error • If the same error message is displayed even when you have inserted a formatted memory card facing the correct way, contact a Canon Customer Support Help Desk. Receiving failed Insufficient space on card • There is not enough free space on the memory card to receive images. Erase images to create space on the memory card, or insert a memory card with sufficient space.
ç Contents ç Chapter Contents On-Screen Information 297 Shooting (Information Display) Battery level (= 298) White balance (= 126) My Colors (= 128) Drive mode (= 130) Eco mode (= 247) Self-timer (= 79) Grid lines (= 89) Camera shake warning (= 72) Metering method (= 123) Compression (image quality) (= 145) / Resolution (= 86) Recordable shots (= 321) Movie resolution (= 88) Remaining time (= 322) Digital zoom magnification (= 77), Digital tele-converter (= 133) Shooting mode (= 301)
ç Contents Focusing range (= 132), AF lock (= 141) Flash mode (= 82, 142) Red-eye correction (= 87) Spot AE point frame (= 123) AF frame (= 134) Image stabilization (= 146) ç Chapter Contents Date stamp (= 83) ISO speed (= 124) Time zone (= 245) AE lock (= 122), FE lock (= 143) Shutter speed Aperture value Exposure compensation level (= 121) 298 i-Contrast (= 125) Zoom bar (= 69) IS mode icon (= 75) Blink detection (= 91) Exposure compensation bar (= 121) Battery Level An on-screen i
ç Chapter Contents ç Contents 299 Playback (Detailed Information Display) Movies (= 68, 148) / ELPH 130 IS ELPH 120 IS IXUS 140 IXUS 135 GPS information display (= 153) Shooting mode (= 301) ISO speed (= 124), Playback speed (= 103) Exposure compensation level (= 121) White balance (= 126) Histogram (= 152) Image editing (= 178 – 184) Compression (image quality) (= 145) / Resolution (= 86, 88), MOV (movies) ELPH 130 IS ELPH 120 IS IXUS 140 IXUS 135 Images have been saved on a computer
ç Contents File size Still images: Resolution (= 321) Movies: Playback time (= 322) ç Chapter Contents Protection (= 163) Favorites (= 176) My Colors (= 128, 182) 300 Red-eye correction (= 87, 184) Shooting date/ time (= 24) • Some information may not be displayed when viewing images on a TV (= 260). Summary of Movie Control Panel in “Viewing” (= 148) Exit Play Slow Motion (Press the buttons to adjust the playback speed. No sound is played.
ç Chapter Contents ç Contents Functions and Menu Tables Functions Available in Each Shooting Mode Shooting Mode 4 A Function Exposure Compensation (= 121) G I – O O O O O Flash (= 82, 142) O O O O O O h – O O O O O Z *1 O – – – – ! O O O O O O AE Lock (= 122)/FE Lock (= 143)*2 – O – – – – AF Lock (= 141) – O – – – – O O O O O O – O O – – – – O O – – – No Information Display O O O – – – Information Display O O O O
ç Chapter Contents ç Contents Shooting Mode Function Exposure Compensation (= 121) 4 O O O O O O Flash (= 82, 142) O O O O O O h – O O O O O Z – – – – – – ! O O O O O O AE Lock (= 122)/FE Lock (= 143)*1 – – – – – – AF Lock (= 141) – – – – – – O O O O O O O O O O O O O – – – O O Focusing Range (= 132) eu Tracking AF (= 136) Screen Display (= 60) No Information Display O – – – – O Information Display O O O O O O
ç Chapter Contents ç Contents Shooting Mode Function Exposure Compensation (= 121) 4 Y T P t N x v – – O O – O O O O – – – O O O – O O Flash (= 82, 142) h Z – – – – – O ! O O O O O O AE Lock (= 122)/FE Lock (= 143)*1 – – – – – – AF Lock (= 141) – – – – O – O O O O O O O O O – O O O O O – O – Focusing Range (= 132) eu Tracking AF (= 136) Screen Display (= 60) No Information Display O – O O O – Information Display O
ç Chapter Contents ç Contents FUNC.
ç Chapter Contents ç Contents Shooting Mode 4 Function Metering Method (= 123) O O O O O O – – – – – – O O O O O O – – – – – – O O O O O O O – – – – – O O O O O O – – – – – – O O O O O O O O O O O O Delay*4 O O O O O O Shots*5 O O O O O O My Colors (= 128) *1 *1 *2 White Balance (= 126) *3 ISO Speed (= 124) Self-Timer (= 79) ][$ Self-Timer Settings (= 81) *1 *2 *3 *4 *5 O Available or set automatically.
ç Chapter Contents ç Contents Shooting Mode 4 Y T P t N x v O O O O O O – – – – – – O O O O O O – – – – O O O O O O O O – – – – O O O O O O O O – – – – O – O O O O O O O O O O O O Delay*4 O O O O O Shots*5 O O O O O O – Function Metering Method (= 123) My Colors (= 128) *1 *1 *2 White Balance (= 126) *3 ISO Speed (= 124) Self-Timer (= 79) ][$ Self-Timer Settings (= 81) O Available or set automatically.
ç Chapter Contents ç Contents Shooting Mode 4 A G I O O O O O O – O O – – – O O O O O O O O O O O O O O O O O O – – – – – – O O O O O O Function Drive Mode (= 130) Still Image Aspect Ratio (= 85) Resolution (= 86) Compression (= 145) – O – – – – O O O O O O O O O O O O Movie Quality (= 88) O Available or set automatically. – Not available.
ç Chapter Contents ç Contents Shooting Mode 4 Function Drive Mode (= 130) O O O O O O O O O O O O – – *1 – O O – O O O O O – – – – – – O – – – – – – – – – – – Still Image Aspect Ratio (= 85) Resolution (= 86) Compression (= 145) – – – – – – O O O O O O O O *2 O O O Movie Quality (= 88) O Available or set automatically. – Not available. *1 Only [ ] and [ ] are available.
ç Chapter Contents ç Contents Shooting Mode 4 Y T P t N x v O O O O O O O O O O – – O O O O O – O O O O O O – – O O O O – – – – – – – – O O O O Function Drive Mode (= 130) Still Image Aspect Ratio (= 85) Resolution (= 86) Compression (= 145) – – – – – – O O O O O O O O O O O O Movie Quality (= 88) O Available or set automatically. – Not available.
ç Chapter Contents ç Contents 4 Shooting Menu Shooting Mode 4 A Function AF Frame (= 134) Face AiAF*1 Tracking AF Center AF Frame Size (= 138)*2 Normal Small Digital Zoom (= 77, 133) Standard Off 1.6x/2.
Shooting Mode Function AF Frame (= 134) Face AiAF*1 Tracking AF Center AF Frame Size (= 138)*2 Normal Small Digital Zoom (= 77, 133) Standard Off 1.6x/2.
Shooting Mode Function AF Frame (= 134) Face AiAF*1 Tracking AF Center AF Frame Size (= 138)*2 Normal Small Digital Zoom (= 77, 133) Standard Off 1.6x/2.
Shooting Mode 4 A G I O O O O O O O O O O O O O O O O O O O – O O – O – O – O – O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O – O O O O O O O O O O O O O O O O O O O O O O Function Flash Settings (= 87, 94) Red-Eye Corr. On Off On/Off Red-Eye Lamp i-Contrast (= 125) Auto Off Review image after shooting (= 95) Display Off/Quick/2 sec./ Time 4 sec./8 sec.
Shooting Mode 4 Function Flash Settings (= 87, 94) Red-Eye Corr. On Off On/Off Red-Eye Lamp i-Contrast (= 125) Auto Off Review image after shooting (= 95) Display Off/Quick/2 sec./ Time 4 sec./8 sec.
Shooting Mode Function Flash Settings (= 87, 94) Red-Eye Corr. On Off On/Off Red-Eye Lamp i-Contrast (= 125) Auto Off Review image after shooting (= 95) Display Off/Quick/2 sec./ Time 4 sec./8 sec.
ç Chapter Contents ç Contents 316 3 Set up Menu Item Ref. Page Item Ref.
ç Chapter Contents ç Contents 317 1 Playback Menu Item Ref. Page Item Ref. Page Slideshow = 159 Cropping = 180 Erase = 168 Resize = 178 Protect = 163 My Colors = 182 Rotate = 173 Scroll Display = 150 Favorites = 176 Auto Rotate = 175 Photobook Set-up = 280 Resume = 150 i-Contrast = 183 Transition = 150 Red-Eye Correction = 184 2 Print Menu Item Ref. Page – Print Item Ref. Page Select All Images = 278 Select Images & Qty.
ç Contents ç Chapter Contents Handling Precautions 318 • The camera is a high-precision electronic device. Avoid dropping it or subjecting it to strong impact. • Never bring the camera near magnets, motors, or other devices that generate strong electromagnetic fields, which may cause malfunction or erase image data. • If water droplets or dirt adheres to the camera or screen, wipe with a dry soft cloth, such as an eyeglass cloth. Do not rub hard or apply force.
ç Chapter Contents ç Contents Specifications 319 Camera Effective Pixels (Max.) Approx. 16 million pixels Lens Focal Length 8x zoom: 5.0 (W) – 40.0 (T) mm (35mm film equivalent: 28 (W) – 224 (T) mm) LCD Monitor ELPH 130 IS IXUS 140 3.0 type color TFT LCD Effective Pixels: Approx. 461,000 dots ELPH 120 IS IXUS 135 ELPH 115 IS IXUS 132 2.7 type color TFT LCD Effective Pixels: Approx. 230,000 dots File Format Design rule for Camera File system, DPOF (version 1.
ç Chapter Contents ç Contents ELPH 130 IS IXUS 140 ELPH 120 IS IXUS 135 Supported Wi-Fi Channels ELPH 130 IS IXUS 140 ELPH 120 IS IXUS 135 Wi-Fi Security 320 ELPH 130 IS ELPH 120 IS 1 – 11 IXUS 140 IXUS 135 1 – 13 WEP, WPA-PSK (AES/TKIP), WPA2-PSK (AES/TKIP) Power Source Battery Pack NB-11L AC Adapter Kit ACK-DC90 Dimensions (Based on CIPA Guidelines) ELPH 130 IS IXUS 140 95.4 x 56.0 x 20.6 mm (3.76 x 2.20 x 0.81 in.) ELPH 120 IS IXUS 135 ELPH 115 IS IXUS 132 92.9 x 52.4 x 21.6 mm (3.66 x 2.06 x 0.
ç Chapter Contents ç Contents ELPH 120 IS IXUS 135 ELPH 115 IS IXUS 132 Number of Shots in Eco mode Approx. 200 Approx. 275 Movie Recording Time*1 Continuous Shooting*2 Approx. 1 hour, 35 minutes Playback Time Approx. 50 minutes Approx. 5 hours *1 Time under default camera settings, when normal operations are performed, such as shooting, pausing, turning the camera on and off, and zooming.
ç Chapter Contents ç Contents 322 • The values in the table are measured according to Canon standards and may change depending on the subject, memory card and camera settings. • The values in the table are based on 4:3 aspect ratio. If the aspect ratio is changed (= 85), more images can be shot because the data size per image will be smaller than with 4:3 images. However, since [ ] 16:9 images have a setting of 1920 x 1080 pixels, their data size will be larger than 4:3 images.
ç Chapter Contents ç Contents Flash Range ELPH 130 IS IXUS 140 Maximum wide angle (j) 50 cm – 3.5 m (1.6 – 11 ft.) Maximum telephoto (i) 1.3 – 1.7 m (4.3 – 5.6 ft) ELPH 120 IS IXUS 135 ELPH 115 IS IXUS 132 Maximum wide angle (j) 50 cm – 3.0 m (1.6 – 9.8 ft.) Maximum telephoto (i) 1.3 – 1.5 m (4.3 – 4.9 ft) Shooting Range Shooting Mode Focusing Range A – Maximum Wide Angle (j) Maximum Telephoto (i) 1 cm (0.4 in.) – infinity 1.3 m (4.3 ft.) – infinity 5 cm (2.0 in.) – infinity 1.3 m (4.
ç Chapter Contents ç Contents 324 Shutter Speed [A] mode, automatically set range 1 – 1/2000 sec. Aperture f/number f/3.2 / f/9.0 (W), f/6.9 / f/20 (T) Battery Pack NB-11L Type: Nominal Voltage: Nominal Capacity: Charging Cycles: Operating Temperatures: Dimensions: Weight: Rechargeable lithium-ion battery 3.6 V DC 680 mAh Approx. 300 times 0 – 40 °C (32 – 104 °F) 34.6 x 40.2 x 5.2 mm (1.36 x 1.58 x 0.20 in.) Approx. 13 g (approx. 0.46 oz.
ç Contents Index A C AC adapter kit.............................257 Camera.......................................252 Adding target devices...........213 Nickname.............................200 Reset all...............................255 Camera access point mode..................................208, 227 Accessories................................257 Access point Manual settings....................224 Number of display items.......224 Adding target devices Camera................................
ç Contents Cropping.....................................180 F 326 Custom white balance................127 Face AiAF (AF frame mode).......135 D Face self-timer (shooting mode)......................... 114 Date/time Adding date stamps...............83 Changing................................26 Date/time battery....................26 Settings..................................24 World Clock..........................245 DC coupler.................................262 DIGITAL CAMERA Solution Disk....
ç Contents Image quality Compression ratio (image quality) Recording time.....................322 My Colors...........................128, 182 Images Erasing.................................168 Playback Viewing Protecting.............................163 Indicator........................................65 Nickname Camera................................200 Device..................................239 Infinity (focus mode)...................133 N Interface cable..........................
ç Contents S Saving images to a computer.....225 Screen Display language....................27 Icons.............................297, 299 Menu FUNC. menu, Menu SD/SDHC/SDXC memory cards Memory cards Searching...................................155 Self-timer......................................79 2-second self-timer.................80 Customizing the self-timer......81 Face self-timer (shooting mode)................... 114 Wink self-timer (shooting mode)................... 112 Sending images.......
ç Contents W Web services Adding target devices...........202 Connection...........................206 Display order........................205 White balance (color).................126 Wi-Fi...........................................190 Access point.........................216 Settings................................216 Windows CameraWindow display.......225 Settings................................217 Wink self-timer (shooting mode)......................... 112 World Clock................................
ç Contents 330 CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION. FCC/IC Notice Models: ELPH 130 IS PC1889/ ELPH 120 IS PC1896 (including WLAN Module Model WM218, FCC ID: AZD218) The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe.
ç Contents 331 Digital Camera, Model IXUS 140 PC1889/ IXUS 135 PC1896 systems This product is installed with the WLAN Module which is certified to standards set by IDA Singapore. USA and Canada only: The Lithium ion/polymer battery that powers the product is recyclable. Please call 1-800-8-BATTERY for information on how to recycle this battery. For CA, USA only Included lithium battery contains Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details.
ç Contents About MPEG-4 Licensing 332 This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding MPEG-4 compliant video and/or decoding MPEG-4 compliant video that was encoded only (1) for a personal and non-commercial purpose or (2) by a video provider licensed under the AT&T patents to provide MPEG-4 compliant video. No license is granted or implied for any other use for MPEG-4 standard.
ç Contents 333 FCC Notice (Digital Camera, Model ELPH 130 IS PC1889/ ELPH 120 IS PC1896/ ELPH 115 IS PC2018 systems) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
ç Contents Canadian Radio Interference Regulations 334 CAN ICES-3 (B)/NMB-3 (B) Battery Charger CB-2LF IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS. DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS. For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet, if needed. Battery Charger CB-2LFE The adapter can be used with a power supply between 100 and 240 V AC.
ç Contents Disclaimer 335 • Reprinting, transmitting, or storing in a retrieval system any part of this guide without the permission of Canon is prohibited. • Canon reserves the right to change the contents of this guide at any time without prior notice. • Illustrations and screenshots in this guide may differ slightly from the actual equipment. • The above items notwithstanding, Canon accepts no liability for damages due to mistaken operation of the products.
