LFD DISPLAY User Manual ED65C ED75C The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
Table of contents Before Using the Product Copyright 5 Safety Precautions Symbols Cleaning Storage Electricity and Safety Installation Operation 6 6 6 7 7 8 10 Preparations Checking the Contents Removing the Packaging Checking the Components 13 13 14 Parts 15 Panel Key 15 Reverse Side 16 External sensor KIT 17 Anti-theft Lock 19 Remote Control 20 Before Installing the Product (Installation Guide) 23 Tilting Angle and Rotation 23 Ventilation 23 Dimensions 24 Installing the Wall Mount Installing the W
Table of contents Screen Adjustment Picture Mode If the input source is PC, HDMI(PC) If the input source is HDMI(AV) 85 85 85 Backlight / Contrast / Brightness / Sharpness / 86 Color / Tint (G/R) Picture Off 96 Reset Picture 96 Sound Adjustment Sound Mode 97 Sound Effect 98 Speaker Settings 99 Reset Sound 99 Picture Size Picture Size Position Resolution Select 87 87 88 88 Auto Adjustment 89 PC Screen Adjustment 89 PIP 90 Applications Advanced Settings Dynamic Contrast Black Tone Fles
Table of contents Safety Lock Standby Control Lamp Schedule OSD Display Power On Adjustment Temperature Control 115 116 116 117 117 117 Anynet+ (HDMI-CEC) Anynet+ (HDMI-CEC) Auto Turn Off Troubleshooting for Anynet+ 118 118 119 120 Magic Clone 122 Reset System 122 Reset All 123 Troubleshooting Guide Appendix Requirements Before Contacting Samsung Customer Service Center Testing the Product Checking the Resolution and Frequency Check the followings.
Chapter 01 Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality. © 2013 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. Microsoft, Windows are registered trademarks of Microsoft Corporation. VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Safety Precautions Cleaning ――Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Caution ――Take the following steps when cleaning. ――The following images are for reference only. Real-life situations may differ from what is shown in the images. RISK OF ELECTRIC SHOCK DO NOT OPEN Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK) THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
Storage Connect the power plug to a grounded power socket (type 1 insulated devices only). High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby. ――Contact Customer Service Center if the inside of the product needs cleaning (service fee will be •• An electric shock or injury may result. ! Do not bend or pull the power cord with force. Be careful not to leave the power cord under a heavy object. charged).
Installation Caution Do not disconnect the power cord while the product is being used. •• The product may become damaged by an electric shock. Warning DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES. •• A fire may result. Only use the power cord provided with your product by Samsung. Do not use the power cord with other products. •• A fire or electric shock may result. Have a technician install the wall-mount hanger.
Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.) Caution •• The product may fall and become damaged and/or cause an injury. Do not drop the product while moving. •• Using the product in an area with excess vibration may damage the product or cause a fire. Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke. •• Product failure or personal injury may result.
Operation Do not leave heavy objects or items that children like (toys, sweets, etc.) on top of the product. •• The product or heavy objects may fall as children try to reach for the toys or sweets resulting in a serious injury. Warning There is a high voltage inside the product. Never disassemble, repair or modify the product yourself. During a lightning or thunderstorm, power off the product and remove the power cable. •• A fire or electric shock may result. •• A fire or electric shock may result.
Do not use or keep combustible spray or an inflammable substance near the product. Caution •• An explosion or fire may result. Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. ! Ensure the vents are not blocked by tablecloths or curtains. •• Activate power-saving mode or a moving-picture screen saver if you will not be using the product for an extended period of time.
Rest your eyes for more than 5 minutes for every 1 hour of product use. Be careful that children do not place the battery in their mouths when removed from the remote control. Place the battery in a location that children or infants cannot reach. •• Eye fatigue will be relieved. •• If children have had the battery in their mouths, consult your doctor immediately. ! Do not touch the screen when the product has been turned on for an extended period of time as it will become hot.
Chapter 02 Preparations Checking the Contents Removing the Packaging ――The following images are for reference only. Real-life situations may differ from what is shown in the images. 1 Remove the black locking device at the bottom of the box. 1 2 3 3 Check the components and remove the styrofoam and plastic bag. ――The appearance of actual components may differ from the image shown. 2 Using the grooves in the box, lift and remove the top of the box.
Checking the Components -- Contact the vendor where you purchased the product if any components are missing. Components ――Components may differ in different locations. -- The appearance of the components and items sold separately may differ from the image shown. Quick setup guide Warranty card D-SUB cable (P.41) Power cord Holder-Wire stand Holder-Ring (4EA) HDMI-DVI cable (P.42) PIM (Not available in some locations) - + - -- A stand is not provided with the product.
Parts Panel Key Power on the product. If you press the [ ] button when the product is turned on, the control menu will be displayed. To exit the OSD menu, press and hold the panel key for at least one second. Move to the upper or lower menu. You can also adjust the value of an option. Move to the left or right menu. You can adjust the volume by moving the panel key left or right when the control menu is not displayed.
Reverse Side Port Description HDMI IN Connects to a source device using an HDMI cable. SERVICE (5V 0.5A) This port is used to upgrade the software. EXTERNAL IR / AMBIENT SENSOR IN Supplies power to the external sensor board or receives the light sensor signal. RGB IN Connects to a source device using a D-SUB cable. AUDIO OUT Connects to the audio of a source device. RGB / HDMI AUDIO IN Receives sound from a PC via an audio cable. RS232C IN Connects to MDC using an RS232C-stereo adapter.
External sensor KIT ――The External sensor KIT has a remote-control sensor, a brightness sensor and function keys. If mounting the display onto a wall, you can move the External sensor KIT to the side of the display. ――The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Buttons Description Remote Control Sensor Aim the remote control towards this spot on the LCD Display.
Attaching the External sensor KIT to the sid ――This External sensor KIT can be attached to any part of the display using the double-sided tape provided with the sensor. ――The External sensor KIT can also be attached to a wall near the display. ――Do not attach the External sensor KIT to the display if the display does not have plastic or metal sides. The display can be damaged.
Anti-theft Lock ――An anti-theft lock allows you to use the product securely even in public places. ――The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. To lock an anti-theft locking device: ――Stand: Sold separately 1 Fix the cable of your anti-theft locking device to a heavy object such as a desk. 2 Put one end of the cable through the loop on the other end.
Remote Control ――Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled. ――A button without a description in the image below is not supported on the product. OFF Power on the product. .QZ 1 ABC 2 DEF 3 GHI JKL MNO PRS TUV WXY DEL-/-- SYMBOL MUTE 4 7 5 8 0 6 VOL MagicInfo Lite/S SOURCE -- Remote control button functions may differ for different products. Enter the password in the OSD menu.
Quickly select frequently used functions. TOOLS INFO Display information on the screen. Move to the upper, lower, left or right menu, or adjust an option's setting. Confirm a menu selection. Return to the previous menu. RETURN EXIT PC DVI HDMI DP A B C D MAGICINFO 3D LOCK Exit the current menu. Manually select a connected input source from PC, HDMI. It sets safe lock function. -- Remote control button functions may differ for different products.
Adjusting the OSD with the Remote Control Description 1 Open the OSD menu. 2 Select from Picture, Sound, Applications, System or Support in the displayed OSD menu screen. 3 Change settings as desired. 4 Finish setting. 7m ~ 10m Buttons Remote Control Reception Range 30˚ 30˚ Use the remote control within 7m to 10m from the sensor on the product at an angle of 30 from the left and right. ――Store used batteries out of reach of children and recycle. ――Do not use a new and used battery together.
Before Installing the Product (Installation Guide) To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. •• Ensure that an authorized installation company installs the wall mount. •• Otherwise, it may fall and cause personal injury. •• Make sure to install the specified wall mount. 15 ˚ Tilting Angle and Rotation ――Contact Samsung Customer Service Center for further details.
Figure 1.3 Side view Installation on an Indented Wall ――Contact Samsung Customer Service Center for further details. B D D Plane view A Minimum 40 mm B Minimum 70 mm A C Minimum 50 mm D Minimum 50 mm E Ambient temperature: Under 35 C ――When installing the product on an indented wall, allow at least the space specified above between the product and wall for ventilation and ensure that the ambient temperature is kept below 35 C. C E Figure 1.
Installing the Wall Mount Installing the Wall Mount Kit The wall mount kit (sold separately) allows you to mount the product on the wall. For detailed information on installing the wall mount, see the instructions provided with the wall mount. We recommend you contact a technician for assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall mount on your own.
Wall Mount Kit Specifications (VESA) ――Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to surfaces other than plaster board, please contact your nearest dealer for additional information. If you install the product on a slanted wall, it may fall and result in severe personal injury. •• Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided.
Remote Control (RS232C) •• Pin assignment 1 2 3 4 5 Cable Connection RS232C Cable Interface RS232C (9 pins) Pin TxD (No.2), RxD (No.3), GND (No.
LAN Cable •• RS232C cable Connector: 9-Pin D-Sub to Stereo Cable 9 •• Pin assignment 3 2 1 5 1 2 3 4 5 6 7 8 -P2- 6 -P1- 1 -P1Female -P1- -P2- -P2- Rx 2 --------> 3 Tx STEREO Tx 3 <-------- 2 Rx PLUG Gnd 5 ---------- 5 Gnd (3.
Cross LAN cable (PC to PC) •• Connector : RJ45 Direct LAN cable (PC to HUB) HUB P1 P2 Signal P1 P2 Signal TX+ 1 <--------> 3 RX+ RJ45 MDC P2 RJ45 MDC P1 P1 P2 RJ45 MDC P2 Signal TX- 2 <--------> 6 RX- <--------> 1 TX+ RX+ 3 <--------> 1 TX+ 2 <--------> 2 TX- RX- 6 <--------> 2 TX- RX+ 3 <--------> 3 RX+ RX- 6 <--------> 6 RX- Signal P1 TX+ 1 TX- 29
Connection •• Connection 2 •• Connection 1 RJ45 IN RS232C OUT IN RS232C OUT IN RS232C OUT IN RS232C RJ45 OUT •• Connection 3 RJ45 RS232C OUT IN RS232C OUT IN RS232C OUT IN RS232C OUT 30
No. Control Codes Viewing control state (Get control command) Header Command 0xAA Command type ID Data length Command 0xAA Command type Command type 10 Video Wall On 0x84 0~1 11 Video Wall User Control 0x89 - E.g. Power On & ID=0 Data length Data 1 Value Checksum Command No. Value range •• All communications take place in hexadecimals. The checksum is calculated by adding up all values except the header.
Power control Volume control •• Function A product can be powered on and off using a PC. •• Function The volume of a product can be adjusted using a PC.
Input source control 0x24 HDMI2_PC •• Function The input source of a product can be changed using a PC. 0x25 DisplayPort ――DVI_video, HDMI1_PC and HDMI2_PC cannot be used with the Set command. They only respond to •• Viewing input source state (Get Input Source Status) Header Command 0xAA 0x14 ID Data length "Get" commands. ――This model does not support HDMI1, HDMI1_PC, HDMI2 and HDMI2_PC ports. Checksum ――MagicInfo is only available with models that contain the MagicInfo function.
Screen mode control •• Nak •• Function The screen mode of a product can be changed using a PC. Screen mode cannot be controlled when the Video Wall function is enabled. ――This control can only be used on models that include a TV.
PIP On/Off control Auto adjustment control (PC and BNC only) •• Function The PIP mode of a product can be turned on or off using a PC. •• Function Automatically adjust the PC system screen using a PC. ――Only available on models that have the PIP function. ――The mode cannot be controlled if Video Wall is set to On. •• Viewing auto adjustment state (Get Auto Adjustment Status) None ――This function is not available in MagicInfo.
Video Wall Mode Control Safety Lock •• Function Video Wall mode can be activated on a product using a PC. •• Function PC can be used to turn the Safety Lock function on or off on a product. This control is only available on a product whose Video Wall is enabled. This control is available regardless of whether or not the power is turned on.
Video Wall On •• Nak •• Function Turn Video Wall on or off on the product from your computer. Header Command 0xAA 0xFF ID Data length Ack/Nak r-CMD Val1 3 'N' 0x84 ERR Checksum •• Get Video Wall On/Off Status Header Command 0xAA 0x84 ID Data length "ERR": A code showing what error has occurred Checksum Video Wall User Control 0 •• Function Turn the Video Wall function on or off on the product from your computer.
10x10 Video Wall Model 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Off 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 1 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1A 0x1B 0x1C 0x1D 0x1E 0x1F 2 0x21 0x22 0x23 0x24 0x25 0x26 0x27 0x28 0x29 0x2A 0x2B 0x2C 0x2D 0x2E 0x2F 3 0x31 0x32 0x33 0x34 0x35 0x36 0x37 0x38 0x39 0x3A 0x3B 0x3C 0x3D 0x3E 0x3F 4 0x41 0x42 0x43 0x44 0x45 0x46 0x47 0x48 0x49 0x4A 0
10x10 Video Wall Model : ( 1 ~ 100) Set Number Data 1 0x01 2 0x02 ... ...
Chapter 03 Connecting and Using a Source Device Before Connecting Check the following before you connect this product with other devices. Devices that can be connected to this product include PCs, camcorders, speakers, set top boxes and DVD/Blu-ray Disc players. Pre-connection Checkpoints ――Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device.
Connecting to a PC •• Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. •• A PC can be connected to the product in a variety of ways. Select a connection method suitable for your PC. ――Connecting parts may differ in different products.
Connection Using an HDMI-DVI Cable ――When you connect a PC to the product using an HDMI-DVI cable, set Edit Name to DVI PC to access video and audio content stored on the PC.
Changing the Resolution ――Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality. ――The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. Changing the Resolution on Windows XP Go to Control Panel Display Settings, and change the resolution. Changing the Resolution on Windows Vista Go to Control Panel Personal Settings Display Settings, and change the resolution.
Changing the Resolution on Windows 7 Go to Control Panel Display Screen Resolution, and change the resolution. Changing the Resolution on Windows 8 Go to Settings Control Panel Display Screen Resolution, and change the resolution.
Connecting to a Video Device •• Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. •• You can connect a video device to the product using a cable. ――Connecting parts may differ in different products. ――Press the SOURCE button on the remote control to change the source. Connection Using an HDMI-DVI Cable ――Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable.
Connection Using an HDMI Cable Using an HDMI cable or HDMI to DVI Cable (up to 1080p) •• For better picture and audio quality, connect to a digital device using an HDMI cable. •• An HDMI cable supports digital video and audio signals, and does not require an audio cable. -- To connect the product to a digital device that does not support HDMI output, use an HDMI-DVI and audio cables.
Connecting to an Audio System ――Connecting parts may differ in different products.
Changing the Input source Source T MENUm : Applications ENTER Source allows you to select a variety of sources and change source device names. Source HDMI PC Source List You can display the screen of a source device connected to the product. Select a source from source list to display the screen of the selected source. ――The input source can also be changed by using the SOURCE button on the remote control.
Chapter 04 Using MDC MDC (Multiple Display Control) is an application that allows you to easily control multiple display devices simultaneously using a PC. Configuring Settings for Multi Control MENU m :System T Multi Control ENTER Assign an individual ID to your product. Configuring settings for Multi Control •• ID Setup Assign an ID to a set. (Range: 0~99) Press to select a number, and press . •• ID Input Enter the ID number of the product connected to the input cable for input signal reception.
MDC Program Installation/Uninstallation Installation MDC installation can be affected by the graphics card, mother board and network conditions. If a software installation window is not displayed on the main screen, install with the MDC Unified execution file in the MDC folder on the CD. If the directory path is not specified, the program will be installed in the default directory path. Select "Launch MDC Unified" and click "Finish" to run the MDC program immediately.
What is MDC? Multiple display control "MDC" is an application that allows you to easily control multiple display devices simultaneously using a PC. Connecting to MDC Using MDC via RS-232C (serial data communications standards) An RS-232C serial cable must be connected to the serial ports on the PC and monitor.
Using MDC via Ethernet Enter the IP for the primary display device and connect the device to the PC. One display device can connect to another using an RS-232C serial cable. Connection using a cross LAN cable ――Multiple products can be connected using the RS232C IN / OUT port on the product.
Connection Management Connection management includes the Connection list and Connection list modification options. Connection list - Connection list shows the details of the connections such as connection setting (IP/COM, Port No, MAC, and Connection Type), connection status, Set ID Range, and detected devices. Each connection can contain a maximum of 100 devices connected in serial daisy-chain fashion.
User Login Launching the program displays the user login window. The initial login ID (Username: admin) and password (password: admin) are set to admin. ――After logging in for the first time, make sure to change the password to ensure security. ――To change the password, go to Home > User Settings. After you are logged in, [User Login : admin] appears at the right bottom of the program. To log in automatically when the program restarts, select the Auto Login checkbox in the User Login window.
Auto Set ID Auto Set ID feature assigns a Set ID for all the LFDs connected in daisy-chain of a selected connection. There can be a maximum of 100 LFDs in a connection. The Set ID is assigned sequentially in the daisychain running from 1 to 99, and then finally to Set ID 0. ――ID for the last 100th LFD is set to 0.
Cloning Using the Cloning feature, you can copy the setting of one LFD and apply it to multiple selected LFDs. You can select specific tab categories or all tab categories for cloning, using the copy setting option window. ――To delete the settings you have configured, click the Paste Settings button.
Command Retry This feature is used to specify the maximum number of times the MDC command will be retried in case of there being no reply or a corrupted reply from an LFD. The retry count value can be set using the MDC options window. The retry count value must be between 1-10. The default value is 1.
Getting Started with MDC 1 1 To start the program, click Start Programs Samsung MDC Unified. The login window appears after the MDC program is launched. Enter the user ID and password. •• The default user ID and password are admin. •• Make sure to change the password after the first login. 2 2 Click Add to add a display device. SET ID Range: Select a range of the unique ID assigned to a monitor. -- If the connection is established via RS232C, go to Serial and specify the COM Port.
Main Screen Layout 1 6 1 Menu Bar Change the status of a display device or the properties of the program. 2 Device Category View a list of connected display devices or device groups. 3 Schedule Category View a list of schedules for display devices. 4 Set List Select the display device you want to adjust. 2 5 Modify the Set List Add, edit, regroup or delete sets. 3 6 Help Topics Display help topics for the program.
――The volume can be changed or the sound can be muted only for displays that are turned on. Volume Volume •• Adjust the volume of a selected display. 2 Alert 3 •• The volume can be adjusted using the slider bar in the range of 0 to 100. Mute •• Enable or disable Mute for a selected display. Mute will automatically be disabled if Volume is adjusted when Mute is on.
User Login User Settings •• Add, delete or edit login information. Logout •• Log out from the current user account as follows. •• Click Logout. The message "Do you want to log admin out?" is displayed •• Click Yes. The user login window appears. •• If you do not want to log in, click Close. The program is closed. ――If you close the program using Logout, the login window will appear prompting you to enter user information even if the Auto Login checkbox is selected.
Color Color •• Adjust the colors for the selected display device. Tint (G/R) •• Adjust the tint for the selected display device. Color Tone •• Adjust the background color tone for the selected display device. Color Temp. -- Color and Tint (G/R) are not available if the input source is PC. -- Color, Tint (G/R), Color Tone and Color Temp. are not available if both PC Source and Video Source are selected. Options •• Adjust the color temperature for the selected display device.
MPEG Noise Filter Reduces MPEG noise to provide improved picture quality. •• Off / Low / Medium / High / Auto Smart LED Controls the LED backlight to maximize picture clarity. Cinema Black In Movie mode, this feature dims the top and bottom areas of the video image to provide a more immersive viewing experience. •• Off: Turns off the Cinema Black feature. •• On: Adjusts the dimming of the top and bottom areas of the screen according to the video.
Advanced features 3D Mode Select the 3D input format. 3D L/R Change Swap the left and right pictures. 3D 2D Displays the image for the left eye only. 3D Auto View 3D Control If you set 3D Auto View to Message Notice, a pop up message window appears when the product receives a 3D signal. 3D Optimization The overall adjustment of 3D effect. 3D Expert Pattern View a 3D pattern. 3D Effect Adjust 3D effects like perspective and depth for your preferred 3D viewing experience.
Advanced Settings Dynamic Contrast Adjust the screen contrast. Gamma Control Adjust the primary color intensity. RGB Only Mode Displays the Red, Green and Blue color for making fine adjustments to the hue and saturation. Flesh Tone Emphasize pink “Flesh Tone.” Motion Lighting Reduces power consumption by reducing screen brightness when the picture on the screen is in motion. LED Motion Plus Removes blur and judder from scenes with larger amounts of rapid movement to provide a clearer picture.
Sound Adjustment You can change the sound settings. Choose display devices from the list of sets, and select the Sound tab. Bass •• Adjust the bass for the selected display. Treble •• Adjust the treble for the selected display. -- The Bass or Treble item will be disabled if the item is not supported by the selected set. Balance(L/R) •• Adjust the volume of the left and right speakers of the selected display device. SRS TS XT •• Enable or disable the SRS TS XT effect for the selected display device.
Format H •• Select the format to display the split screen. •• Select the number of horizontal display devices. •• A maximum of 15 displays can be arranged in a row. ――A maximum of 6 can be assigned to V if 15 is assigned to H. V •• Select the number of vertical display devices. •• A maximum of 15 displays can be arranged in a row. ――A maximum of 6 can be assigned to H if 15 is assigned to V.
General User Auto Color •• Automatically adjust the screen colors. ――Available only in PC mode. Auto Power •• Set the product to automatically power on. Standby Control •• Set the standby mode to activate if an input source is not detected. Fan & Temperature Configure the settings required to detect the fan speed and internal temperature for the product's protection. Fan Control •• Select a method to configure the fan speed. Fan Speed Setting •• Configure the fan speed.
Security Safety Lock •• Lock the on-screen menus. ――To unlock the menus, set Safety Lock to Off. Button Lock •• Lock the buttons on the display device. ――To unlock the buttons, set Button Lock to Off. OSD Display Source OSD •• Select whether to display a message when the Source is changed. Not Optimum Mode OSD •• Select whether to display a message when a non-compatible mode is selected. No Signal OSD •• Select whether to display a message when there is no input signal.
Time Clock Set Change the current time on the selected display device according to the time set on a PC. If the time is not set on the display device, null values will be displayed. Timer On Timer •• Repeat: Specify the period for which you want to repeat the selected Timer. Once, EveryDay, Mon~Fri, Mon~Sat, Sat~Sun, Manual •• Holiday Apply: The Holiday Management settings can be applied to the Timer. •• On Time: Set the time to power on the selected display device.
Holiday Management Holiday Management allows you to prevent devices that are set to be powered on by the Timer from turning on at a specified date. ――The Holiday Management function can be enabled or disabled in the Timer settings menu. •• Add: You can specify holidays. Click the Add button in the Holiday Management window. •• Delete: Delete holidays. check the corresponding checkboxes and click this button. •• List of holidays: View a list of holidays you have added.
Screen Saver This function prevents screen burn-in when the screen of the selected display device is left idle for an extended period of time. Timer: You can set the timer for Screen Saver. •• Off •• Repeat: Display the image retention-preventive pattern set in Mode at specified time intervals (Period). •• Interval: Display the image retention-preventive pattern set in Mode for a specified period of time (from Start Time to End Time). •• Mode: Select a screen protective pattern to display.
Safety Screen The Safety Screen function can be used to prevent screen burn-in when a stationary image displays on the screen of a display device for an extended period of time. Lamp Control Lamp Control is used to adjust the backlight to reduce power consumption. Automatically adjust the backlight of the selected display device at a specified time. If Manual Lamp Control is adjusted, Auto Lamp Control will automatically switch to Off. Manually adjust the backlight for the selected display.
Ticker Input text while a video or image is displayed and display the text on the screen. Ticker Enable or disable Ticker. •• Off / On Message Enter a message to display on the screen. Timer Set the Start Time and End Time to display a message (Message). Position Select an orientation to display a message (Message) from Horizontal and Vertical. Motion Specify the Direction and Speed to display a message (Message).
Tool Settings •• Panel Control: Turn on or off the screen of a display device. •• Remote Control: Enable or disable the remote control. Security Reset •• Reset Picture: Reset the screen settings. •• Reset Sound: Reset the sound settings. •• Reset System: Reset the system settings. •• Reset All: Reset the screen, sound and system settings at the same time.
Edit Column Options Configure the settings for the items that will be displayed on the list of displays. •• Language: Select a language to use in the MDC program. After selecting a language, restart the MDC program to use the selected language. •• Command Retry Count: Specify the number of retry attempts when a command fails. •• Error Status Interval: Specify the time interval to query the display device in order to check if "Fault Device" has occurred.
Monitor Window A window appears showing details for data transfer between the computer and display devices. •• Filter Information View the program information.
Other Functions Resizing a Window Place the mouse pointer on a corner of the program window. An arrow will appear. Move the arrow to customize the size of the program window.
Group Management Create groups and manage the list of sets on a group basis. ――Duplicate group names cannot be used. Creating Groups 1 Right-click and select Group 2 In the Edit Group window displayed, click Add on the same level or Add on the sub level. Edit in the display device list section on the left side of the program window. •• Add on the same level: Create a group on the same level as the selected group. -- The Add on the same level button is enabled only if at least one group is created.
•• Add on the sub level: Create a sub-group under the selected group. Deleting Groups 3 Enter the group name. 1 Select a group name, and click Edit. 2 In the Edit Group window displayed, click Delete. 3 Click Yes. The group will be deleted.
Renaming Groups 1 Select a group name, and click Edit. 2 In the Edit Group window displayed, click Rename. 3 If a cursor appears in the old group name, enter a new group name. Rename Schedule Management Creating Schedules Create and register a schedule on a group basis. 1 Click All Schedule List in the schedule section on the left side of the program window. The Add button will be enabled in the middle.
2 Click the Add button. The Add Schedule window will appear. 3 Click Add below the Device Group item, and select the group you want to add a schedule to. 4 Select Date&Time/Action and click OK. The schedule will be added and a list of schedules will appear in the set list window. -- Device Group: Select a group. -- Date&Time Instant Execution: Run the schedule immediately. Timer: Set the date, time and interval to run the schedule.
Troubleshooting Guide -- This program may malfunction sometimes due to a communication problem between the PC and display or electromagnetic waves emitted from nearby electronic devices. Issue The display you want to control does not appear on the system information chart. Solution 1 Check the connection of the RS232C cable (check that the cable is properly connected to appropriate serial port). 2 Check that another display with a duplicate ID is not connected.
How display properties are shown when multiple displays are used 1 When no display is selected: The default value is displayed. 2 When one display is selected: Settings for the selected display are displayed. 3 When two displays are selected (e.g. in sequence of ID 1 and ID 3): The settings for ID 1 are displayed before the settings for ID 3. 4 When the All+Select checkbox is checked and all displays are selected: The default settings are displayed.
Chapter 05 Screen Adjustment Configure the Picture settings (Backlight, Color Tone, etc.). -- The layout of the Picture menu options may vary depending on the product. Picture Mode MENU m :Picture T Picture Mode Select a picture mode (Picture Mode) suitable for the environment where the product will be used. Different Picture Mode options are displayed depending on the current input source.
Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R) MENU m :Picture T Your product has several options for adjusting picture quality.
Picture Size MENU m :Picture T Picture Size Picture Size If you have a cable box or satellite receiver, it may have its own set of screen sizes as well. However, we highly recommend you use your product’s 16:9 mode most of the time. ENTER •• 16:9: Sets the picture to 16:9 wide mode. •• Zoom1: Use for moderate magnification. Cuts off the top and sides. Picture Size Picture Size •• Zoom2: Use for a stronger magnification.
Position Adjusts the picture position. Position is only available if Picture Size is set to Zoom1, Zoom2, Wide Fit, Screen Fit. ――To use the Position function after selecting Zoom1, Zoom2, Wide Fit, Screen Fit or Original Ratio, follow these steps. Picture Size Picture Size 16:9 · Position Resolution Select 1 Press the button to select Position. Press the 2 Press the or 3 Press the button. button to move the picture up or down. button.
Auto Adjustment MENU m :Picture T Auto Adjustment Adjust frequency values/positions and fine tune the settings automatically. ENTER Picture Auto Adjustment -- Available in PC mode only. -- The displayed image may differ depending on the model. PC Screen Adjustment •• Coarse / Fine Removes or reduces picture noise. If the noise is not removed by Fine-tuning alone, use the Coarse function to adjust the frequency as best as possible (Coarse) and Fine-tune again.
PIP T MENUm : System PIP Settings PIP ENTER Picture PIP The picture from the external video source will be in the main screen and the picture from the product will be in the PIP subpicture screen. Main picture Sub picture PC HDMI HDMI PC •• PIP (Off / On): Activate or deactivate the PIP function. •• Source: You can select a source of the sub picture. -- The displayed image may differ depending on the model. •• Size ( -- For PIP sound, refer to the Sound Select instructions.
Advanced Settings MENU m :Picture T Advanced Settings Input Source ENTER Advanced Settings Dynamic Contrast Medium Black Tone Off Flesh Tone 0 RGB Only Mode Color Space Off Native Picture Mode PC, HDMI (when a PC is connected) Advanced Settings Information White Balance / Gamma Advertisement White Balance / Gamma Dynamic Contrast Adjust the screen contrast. •• Off / Low / Medium / High Black Tone Select the black level to adjust the screen depth.
White Balance Advanced Settings Adjust the color temperature for a more natural picture. •• R-Offset / G-Offset / B-Offset: Adjust each color’s (red, green, blue) darkness. White Balance Gamma Motion Lighting 0 Off •• R-Gain / G-Gain / B-Gain: Adjust each color’s (red, green, blue) brightness. •• Reset: Resets the White Balance to its default settings. Gamma Adjust the primary color intensity. -- The displayed image may differ depending on the model.
Picture Options MENUm Picture : TPicture Options Select an option using the Color Temp. arrow keys, and the press Use the arrow keys to change the setting, and then press ENTER Picture Options Color Tone and Input source PC, HDMI(when a PC is connected) Standard Picture Mode . . Picture Options Information Color Tone / Color Temp. / Dynamic Backlight Advertisement Color Tone / Color Temp.
Color Tone Picture Options Color Tone Color Temp. Standard 10000K Digital Clean View Off MPEG Noise Filter Off HDMI Black Level Normal Film Mode Off Dynamic Backlight Off If the input source is PC, HDMI(PC connection). •• Off / Cool / Standard / Warm If the input source is HDMI. •• Off / Cool / Standard / Warm1 / Warm2 ――Warm1 or Warm2 will be deactivated when the Picture Mode is Dynamic. ――Settings can be adjusted and stored for each external device connected to an input on the product.
HDMI Black Level Picture Options HDMI Black Level Normal Film Mode Off Dynamic Backlight Off Selects the black level on the screen to adjust the screen depth. •• Normal / Low ――Available only in HDMI mode (AV Timing : 480p, 576p, 720p, 1080i, 1080p). Film Mode This mode is suitable to view movies. -- The displayed image may differ depending on the model. Sets the product to automatically sense and process film signals from all sources and adjust the picture for optimum quality.
Picture Off The product screen is turned off but the audio will continue. Press any key on your remote to turn the screen back on. Picture Picture Off Reset Picture -- The displayed image may differ depending on the model. Reset Picture Resets your current picture mode to its default settings. Picture Picture Off Reset Picture -- The displayed image may differ depending on the model.
Chapter 06 Sound Adjustment Configure the sound (Sound) settings for the product. Sound Mode MENU m :Sound T Sound Mode You can select a sound mode to suit your personal preferences. •• Standard: Selects the normal sound mode. ENTER •• Movie: Provides the best sound for movies. •• Clear Voice: Emphasizes voices over other sounds. Sound Sound Mode •• Music: Emphasizes music over voices.
Sound Effect MENU m :Sound T Sound Effect Configure your preferred sound effect for output sound. ――If Speaker Select is set to External, Sound Effect is disabled. ENTER Sound Sound Mode Standard Sound Effect Speaker Settings Reset Sound ――Available only when Sound Mode is set to Standard. •• DTS TruSurround (Off / On) This function provides a virtual 5.1 channel surround sound experience through a pair of speakers using HRTF(Head Related Transfer Function) technology.
Speaker Settings MENU m :Sound T Speaker Settings ENTER Sound •• Speaker Select (External / Internal / Receiver) If you are listening to the sound track of a broadcast or movie through an external receiver, you may hear a sound echo caused by the difference in decoding speed between the products speakers and the speakers attached to your audio receiver. If this occurs, set the product to External. ――When you set Speaker Select to External, the products speakers are turned off.
Chapter 07 Applications Source List Edit Name T MENUm : Applications Source List TOOLS Edit Name ENTER Source allows you to select a variety of sources and change source device names. Sometimes the screen will not display properly unless the name of a source device is specified in Edit Name. You can display the screen of a source device connected to the product. Select a source from Source List to display the screen of the selected source.
Chapter 08 System Menu Language Set the menu language. ――A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions on your PC. T MENUm : System Menu Language ENTER System Menu Language English Multi Control Time Eco Solution Screen Burn Protection Ticker Off -- The displayed image may differ depending on the model.
Multi Control MENU m : System T Multi Control Configuring settings for Multi Control •• ID Setup Assign an ID to a set. (Range: 0~99) ENTER Press to select a number, and press . •• ID Input Enter the ID number of the product connected to the input cable for input signal reception. System Menu Language or English Enter the number you want using the number buttons on the remote control.
Time MENU m : System T You can configure Clock Set or Sleep Timer. You can also set the product to automatically turn on or off at a specified time using the Timer function. Time Clock Set ENTER Set the clock to use the various various timer features of the product. Time •• Clock Set Set the Date and Time. Clock Set Sleep Timer Select Clock Set. Select Date or Time, and then press Off . Use the number buttons to enter numbers or press the up and down arrow buttons.
On Timer Time Set On Timer so that your product turns on automatically at a time and on a day of your choosing. On Timer Off Timer Holiday Management The power is turned on with the specified volume or input source. Off On Timer: Set the on timer by making a selection from one of the seven options. Ensure you set the current time first. (On Timer 1 ~ On Timer 7) ――You must set the clock before you can use On Timer. •• Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.
Off Timer Time Set the off timer (Off Timer) by making a selection from one of the seven options. (Off Timer 1 ~ Off Timer 7) ――You must set the clock before you can use Off Timer. On Timer Off Timer Holiday Management Off •• Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. If you select Manual, you can choose the days you want Off Timer to turn off your product. ――The check mark indicates days you’ve selected. •• Time: Set the hour and minute.
Eco Solution Energy Saving Reduce the power consumption by adjusting the screen brightness. T Eco Solution MENUm : System ENTER •• Off / Low / Medium / High Eco Sensor Eco Solution Energy Saving Off Eco Sensor Off Auto Power Off Off To enhance your power savings, the picture settings will automatically adapt to the light in the room. •• Off / On ――Adjusting the Backlight setting under Picture while Eco Sensor is on will disable the Off. •• Min.
Screen Burn Protection T MENUm : System Screen Burn Protection To reduce the possibility of screen burn, this unit is equipped with Pixel Shift screen burn prevention technology. Pixel Shift moves the picture slightly on the screen. ENTER Pixel Shift Screen Burn Protection Minimize image retention by finely moving pixels horizontally or vertically. Pixel Shift Off Timer Off Immediate Display Off Side Gray Off -- The displayed image may differ depending on the model.
Timer Screen Burn Protection You can set the timer for Screen Burn Protection. Pixel Shift Off Timer Off •• Off Immediate Display Off •• Repeat: Display the image retention-preventive pattern set in Mode at specified time intervals(Period). ――Period and Time can be configured when Repeat is selected. Side Gray Off -- The displayed image may differ depending on the model. The Pixel Shift feature stops automatically after a specified period of time.
Immediate Display Screen Burn Protection Pixel Shift Off Timer Off Immediate Display Off Side Gray Off Select the screen saver you want to display immediately. •• Off / Pixel / Rolling Bar / Fading Screen Side Gray When the screen is set to 4:3 aspect ratio, adjust the brightness of white margins on sides to protect the screen. •• Off / Light / Dark -- The displayed image may differ depending on the model.
Ticker T MENUm : System Input text while a video or image is displayed and display the text on the screen. Ticker ENTER System Screen Burn Protection Ticker Video Wall Source AutoSwitch Settings •• Off / On ――Message, Time, Position, Motion, and Font Options are enabled only when Ticker is set to On. •• Message: Enter a message to display on the screen. •• Time: Set the Start Time and End Time to display a Message. •• Position: Select an orientation to display a Message from Horizontal and Vertical.
Video Wall T MENUm : System Customize the layout of multiple displays that are connected to form a video wall. In addition, display part of a whole picture or repeat the same picture on each of the connected multiple displays. Video Wall Video Wall ENTER You can activate or deactivate Video Wall. Video Wall To organize a video wall, select On. Video Wall On · Format Full · Horizontal 1 · Vertical 1 · Screen Position Format Select a format to display images on multiple displays.
Vertical Video Wall Video Wall On · Format Full · Horizontal 1 · Vertical 1 · Screen Position This function automatically divides the screen according to the specified number of vertical displays. Enter the number of vertically arranged displays. The vertical screen will automatically be divided according to the number entered. A maximum of 15 displays can be assigned to the vertical arrangement.
Source AutoSwitch Settings Turning on the display with Source AutoSwitch On, and the previous video source selection is not active, the display will automatically search the different video input sources for active video. T MENUm : System Source AutoSwitch Source AutoSwitch Settings ENTER When the Source AutoSwitch is On, the display video source will automatically be searched for active video.
Change PIN T MENUm : System Change PIN The Change PIN screen will appear. Choose any 4 digits for your PIN and enter it in Enter New PIN. Reenter the same 4 digits in Confirm New PIN. ENTER When the Confirm screen disappears, press the Close button. The product has memorized your new PIN. System Change PIN -- The displayed image may differ depending on the model.
General Max. Power Saving Turns off the product to reduce power consumption after the PC has been left idle for a specified period of time. T MENUm : System General •• Off / On ――Available only PC, HDMI mode. ENTER General Game Mode Max. Power Saving On Game Mode Off When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting game mode.
Standby Control General Max. Power Saving On Game Mode Off Auto Power Off Safety Lock Off Standby Control Off Lamp Schedule Off You can set the screen standby mode to be applied when an input signal is received. •• Auto Power-saving mode will activate if no input signals are detected even though a source device is connected to the display. The message No Signal will appear if no source device is connected. •• On Power-saving mode will activate if no input signals are detected.
OSD Display General Displays or hides a menu item on the screen. ――Source OSD / No Signal OSD / MDC OSD OSD Display Power On Adjustment 0 sec Temperature Control 77 Power On Adjustment You can set the warm-up time for the screen to turn on after the power button is pressed. (Range: 0 – 50 seconds) ――A warm-up time that is too short may damage the product due to overvoltage. -- The displayed image may differ depending on the model.
Anynet+ (HDMI-CEC) Anynet+ (HDMI-CEC) T MENUm : System Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung product remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it. ――You can only control Anynet+ devices using the product remote control, not the buttons on the product.
Auto Turn Off Anynet+ (HDMI-CEC) Anynet+ (HDMI-CEC) On Auto Turn Off Yes Setting an Anynet+ Device to turn Off automatically when the product is turned off. •• No / Yes ――If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the product powers off. ――May not be enabled depending on the device. Switching between Anynet+ Devices -- The displayed image may differ depending on the model.
Troubleshooting for Anynet+ Problem Anynet+ does not work. Possible Solution •• Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. •• You can connect only one receiver (home theater). •• Check if the Anynet+ device power cord is properly connected. •• Check the Anynet+ device’s Video/Audio/HDMI cable connections. •• Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+setup menu. •• Check whether the remote control is Anynet+ compatible.
Problem The connected device is not displayed. Possible Solution •• Check whether or not the device supports Anynet+ functions. •• Check whether or not the HDMI cable is properly connected. •• Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ System menu. •• Search Anynet+ devices again. •• Anynet+ requires an HDMI connection. Make sure the device is connected to your product with an HDMI cable. •• Some HDMI cables may not support Anynet+ functions.
Magic Clone T Magic Clone MENUm : System Export the product settings to a USB device or load the settings via a USB device. This option is useful when assigning the same settings to several products. ENTER Magic Clone •• Clone to USB: Copy the product settings to a USB device. •• Clone From USB: Assign the settings saved in a USB device to the product. -- After configuration is complete, the product is rebooted automatically.
Reset All T Reset All MENUm : System This option returns all the current settings for a display to the default factory settings. ENTER System Reset All -- The displayed image may differ depending on the model.
Chapter 09 Support Software Update -- Current Version: This is the software version already installed in the product. T MENUm : Support Software Update ENTER The Software Update menu lets you upgrade your product software to the latest version. ――Be careful not to turn off the power until the upgrade is complete. The product will turn off and on automatically after completing the software upgrade.
Chapter 10 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Testing the Product Check if your product is operating normally by using the product test function. If the screen remains blank while the power LED blinks even when the product is correctly connected to a PC, perform product testing.
Check the followings. Installation issue (PC mode) The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connection is secure. Blank spaces are found on all four sides of the screen when an HDMI or HDMI-DVI cable is connected to the product and PC. The blank spaces found on the screen have nothing to do with the product. Blank spaces on the screen are caused by the PC or graphics card.
Screen issue The screen appears unstable and shaky. There are shadows or ghost images left on the screen. Check that the resolution and frequency of the PC and graphics card are set within a range compatible with the product. Then, change the screen settings if required by referring to the Additional Information on the product menu and the Standard Signal Mode Table. The screen is too bright. The screen is too dark. Adjust Brightness and Contrast. Screen color is inconsistent.
Remote control issue The remote control does not work. Make sure that the batteries are correctly in place (+/-). Check if the batteries are flat. Check for power failure. Make sure that the power cord is connected. Check for any special lighting or neon signs switched on in the vicinity. Source device issue A beeping sound is heard when my PC is booting. If a beeping sound is heard when your PC is booting, have your PC serviced.
Q&A Question How can I change the frequency? Answer Set the frequency on your graphics card. •• Windows XP: Go to Control Panel Appearance and Themes Display Advanced Monitor and adjust the frequency in Monitor Settings. •• Windows ME/2000: Go to Control Panel Display adjust the frequency in Monitor Settings. Refer to the user manual for your PC or graphics card for further instructions on adjustment.
Question How do I set powersaving mode? Answer •• Windows XP: Set power-saving mode in Control Panel Screen Saver Settings or BIOS SETUP on the PC. Appearance and Themes •• Windows ME/2000: Set power-saving mode in Control Panel Settings or BIOS SETUP on the PC. Display Display Screen Saver •• Windows Vista: Set power-saving mode in Control Panel Appearance and Personalization Personalize Screen Saver Settings or BIOS SETUP on the PC.
Chapter 11 Specifications 1 General Size Model Name Panel 2 ED65C Size 65 class (64.5 inches / 163 cm) 75 class (75 inches / 189 cm) Display area 1431.4 (H) x 806.5 (V) mm 1653.3 (H) x 931.3 (V) mm 56.4 (H) x 31.8 (V) inches 65.1 (H) x 36.7 (V) inches 1467.5 x 848.0 x 65.0 mm 1675.0 x 958.5 x 65.0 mm 57.8 x 33.9 x 2.6 inches 65.9 x 37.7 x 2.6 inches Weight (without stand) 26.8 kg / 59.1 lbs 28.8 kg / 63.5 lbs VESA 400 x 400 mm / 15.7 x 15.7 inches Display Color 10bit(Dithering), 1.
Model Name ED65C Power Supply Signal connectors Environmental considerations ED75C This product uses 100 to 240V. Refer to the label at the back of the product as the standard voltage can vary in different countries.
PowerSaver The power-saving function of this product reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or move the mouse. Powersavign mode only functions when the product is connected to a PC with a power-saving function.
Preset Timing Modes -- Horizontal Frequency The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency. Horizontal frequency is measured in kHz. -- Vertical Frequency The product displays a single image multiple times per second (like a fluorescent light) to display what the viewer sees.
Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA, 1024 x 768 56.476 70.069 75.000 -/- VESA, 1024 x 768 60.023 75.029 78.750 +/+ VESA, 1280 x 720 45.000 60.000 74.250 +/+ VESA, 1280 x 1024 63.981 60.020 108.000 +/+ VESA, 1280 x 1024 79.976 75.025 135.000 +/+ VESA, 1366 x 768 47.712 59.790 85.500 +/+ VESA,1440 x 900 55.935 59.887 106.500 -/+ VESA,1600 x 900 60.000 60.000 108.000 +/+ VESA,1680 x 1050 65.
Chapter 12 Appendix Contact SAMSUNG WORLD WIDE ――If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG(726-7864) http://www.samsung.com CANADA 1-800-SAMSUNG(726-7864) http://www.samsung.com/ca (English) http://www.samsung.com/ca_fr (French) MEXICO 01-800-SAMSUNG(726-7864) http://www.samsung.com ARGENTINE 0800-333-3733 http://www.samsung.com BOLIVIA 800-10-7260 http://www.samsung.
LATIN AMERICA COLOMBIA 01-8000112112 http://www.samsung.com/co Bogotá: 6001272 COSTA RICA 0-800-507-7267 http://www.samsung.com/latin (Spanish) http://www.samsung.com/latin_en (English) DOMINICA 1-800-751-2676 http://www.samsung.com/latin (Spanish) http://www.samsung.com/latin_en (English) ECUADOR 1-800-10-7267 http://www.samsung.com/latin (Spanish) http://www.samsung.com/latin_en (English) EL SALVADOR 800-6225 http://www.samsung.com/latin (Spanish) http://www.samsung.
LATIN AMERICA PUERTO RICO 1-800-682-3180 http://www.samsung.com TRINIDAD & TOBAGO 1-800-SAMSUNG(726-7864) http://www.samsung.com URUGUAY 40543733 http://www.samsung.com VENEZUELA 0-800-100-5303 http://www.samsung.com AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min) http://www.samsung.com BELGIUM 02-201-24-18 http://www.samsung.com/be (Dutch) EUROPE http://www.samsung.com/be_fr (French) BOSNIA 051 133 1999 http://www.samsung.com BULGARIA 07001 33 11 , normal tariff http://www.samsung.
EUROPE FINLAND 030-6227 515 http://www.samsung.com FRANCE 01 48 63 00 00 http://www.samsung.com/fr GERMANY 0180 5 SAMSUNG bzw. http://www.samsung.com 0180 5 7267864* (*0,14 €/Min. aus dem dt. Festnetz, aus dem Mobilfunk max. 0,42 €/Min.) GREECE 80111-SAMSUNG (80111 726 7864) only from land line http://www.samsung.com (+30) 210 6897691 from mobile and land line HUNGARY 06-80-SAMSUNG(726-7864) http://www.samsung.com ITALIA 800-SAMSUNG(726-7864) http://www.samsung.
EUROPE ROMANIA 08008 SAMSUNG (08008 726 7864) http://www.samsung.com TOLL FREE No. SERBIA +381 11 321 6899 http://www.samsung.com (old number still active 0700 7267864) SLOVAKIA 0800 - SAMSUNG(0800-726 786) http://www.samsung.com SPAIN 902 - 1 - SAMSUNG (902 172 678) http://www.samsung.com SWEDEN 0771 726 7864 (SAMSUNG) http://www.samsung.com SWITZERLAND 0848 - SAMSUNG(7267864, CHF 0.08/min) http://www.samsung.com/ch (German) http://www.samsung.com/ch_fr (French) U.
CIS RUSSIA 8-800-555-55-55 http://www.samsung.com TADJIKISTAN 8-10-800-500-55-500 http://www.samsung.com UKRAINE 0-800-502-000 http://www.samsung.com/ua (Ukrainian) http://www.samsung.com/ua_ru (Russian) UZBEKISTAN 8-10-800-500-55-500 http://www.samsung.com AUSTRALIA 1300 362 603 http://www.samsung.com CHINA 400-810-5858 http://www.samsung.com HONG KONG (852) 3698 4698 http://www.samsung.com/hk (Chinese) ASIA PACIFIC http://www.samsung.
ASIA PACIFIC PHILIPPINES 1-800-10-SAMSUNG(726-7864) for PLDT http://www.samsung.com/ph 1-800-3-SAMSUNG(726-7864) for Digitel 1-800-8-SAMSUNG(726-7864) for Globe 02-5805777 SINGAPORE 1800-SAMSUNG(726-7864) http://www.samsung.com TAIWAN 0800-329-999 http://www.samsung.com 0266-026-066 THAILAND 1800-29-3232 http://www.samsung.com/th 02-689-3232 VIETNAM 1 800 588 889 http://www.samsung.com 8000-4726 http://www.samsung.com/ae (English) MENA BAHRAIN http://www.samsung.
MENA OMAN 800-SAMSUNG(726-7864) http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) QATAR 800-2255 (800-CALL) http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) SAUDI ARABIA 9200-21230 http://www.samsung.com/sa (Arabic) SYRIA 18252273 http://www.samsung.com/Levant (English) TURKEY 444 77 11 http://www.samsung.com U.A.E 800-SAMSUNG (726-7864) http://www.samsung.com ANGOLA 91-726-7864 http://www.samsung.com BOTSWANA 0800-726-000 http://www.
AFRICA SOUTH AFRICA 0860-SAMSUNG (726-7864 ) http://www.samsung.com TANZANIA 0685 88 99 00 http://www.samsung.com UGANDA 0800 300 300 http://www.samsung.com ZAMBIA 211350370 http://www.samsung.
Responsibility for the Pay Service (Cost to Customers) ――When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc. •• If a service technician gives instructions on how to use product or simply adjusts options without disassembling product. •• If a defect is caused by external environmental factors (Internet, Antenna, Wired Signal, etc.
Optimum Picture Quality and Afterimage Burn-in Prevention Optimum Picture Quality •• To enjoy the optimum picture quality, go to Control Panel on your PC and adjust the resolution and refresh rate as follows. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected.
Prevention of Afterimage Burn-in Black Matrix Common Electrode (ITO) What is afterimage burn-in? Afterimage burn-in should not occur when the LCD panel is operating normally. Normal operation refers to a continuously changing video pattern. If the LCD panel displays a fixed pattern for an extended period of time (more than 12 hours), a slight voltage difference may occur between the electrodes in pixels that control the liquid crystals.
•• Avoid combinations of a text color and background color of contrasting brightness. ――Avoid using grey as it may contribute to afterimage burn-in. ――Avoid using colors of contrasting brightness (black and white; grey). FLIGHT : TIME FLIGHT : TIME OZ348 : 20:30 OZ348 : 20:30 •• Regular Text color Change -- Use bright colors of similar brightness.
License DivX Certified Ⓡ to play DivX Ⓡ video up to HD 1080p, including premium content. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. ® Premium Sound 5.1 Manufactured under a license from U.S. Patent No’s: 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567, 7,668,723, 7,392,195, 7,930,184, 7,333,929 and 7,548,853.
Terminology 480i / 480p / 720p / 1080i / 1080p____ Each of the scanning rates above refers to the number of effective scanning lines that decides the screen resolution. The scanning rate may be indicated in i (interlaced) or p (progressive), depending on the scanning method. - Scanning Scanning refers to a process of sending pixels that form an image progressively. A larger number of pixels will deliver a clearer and more vivid picture.
