Instructions Getting to know your camera Use this camera in the following order. Thank you for buying a Samsung Digital Camera. Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in Application software CD-ROM. (p.119-122) Insert the USB cable Insert the supplied USB cable into the PC’s USB port and the camera’s USB connection terminal. (p.123) Check the camera’s power Check the camera’s power.
DANGER WARNING DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Do not attempt to modify this camera in any way. This may result in fire, injury, electric shock or severe damage to you or your camera. Internal inspection, maintenance and repairs should be carried out by your dealer or Samsung Camera Service centre.
CAUTION CAUTION indicates a potentially hazardous situation which, if not avoided, may result in a minor or moderate injury. Leaking, overheating, or burst battery could result in fire or injury. – Use battery with the correct specification for the camera. – Do not short circuit, heat or dispose of battery in fire. – Do not insert the battery with the polarities reversed. Remove the battery when not planning to use the camera for a long period of time.
Contents 025 026 026 026 027 027 028 030 030 032 034 036 036 037 037 038 038 039 039 040 041 041 041 042 042 043 043 044 044 004 Things to watch out for when taking pictures Focus lock Using the camera buttons to set the camera POWER button Shutter button OIS(Optical Image Stabilization) ZOOM W / T button Function Description / Info / Up button Macro / Down button Flash / Left button Self-timer / Right button MENU / OK button Fn button How to use the Fn menu Fn button: Size Fn button: Quality / Frame rate
Contents SETUP 064 065 066 066 067 067 067 068 068 068 068 069 069 070 071 072 074 074 075 Delete button E (Effect) button: Resize E (Effect) button: Rotating an image E (Effect) button: Colour E (Effect) button: Image editing ACB Red eye removal Brightness control Contrast control Saturation control Noise effect E (Effect) button: FUN Cartoon Photo Frame Preset focus frames Composite image Sticker Colour Filter Colour mask 076 Setting up the play back function using the LCD monitor 077 077 078 078 07
Contents MULTIMEDIA 096 096 097 099 100 100 100 100 101 101 102 103 103 103 104 104 104 104 105 105 105 105 106 106 106 006 106 107 MP3 / PMP / TEXT VIEWER mode Downloading files Starting the MP3 / PMP / TEXT VIEWER mode LCD monitor indicator for MP3 / PMP / TEXT VIEWER mode Using the camera buttons to adjust the camera Volume button Play & Pause / Seeking button Delete button Hold / Equalizer button Playlist button Setting up the playback function using the LCD monitor Resume Play mode Skin of MP3
System chart Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre. Package Contents Camera User manual, Product warranty Camera strap AV cable AC adapter ( SAC-47)/ USB cable (SUC-C5) Software CD (see p.118-119) Earphones 20 Pin Gender Rechargeable battery (SLB-1137D) Sold Separately SD/SDHC memory card/ MMC(see p.
Identification of features Front & Top POWER button Shutter button Flash AF sensor/ Self-timer lamp OIS button / MP3, PMP hold button Microphone Speaker Lens Open Close Lens cover 008
Identification of features Back Zoom W button (Thumbnail) Zoom T button (Digital zoom) Camera status lamp Camera strap Close LCD monitor M (Mode) button Fn / Delete button 5-function button Play mode / Print button Open USB / AV / DC / Earphones connection terminal Push and hold the 20 Pin cover as shown, and then connect the cable to the connection terminal.
Identification of features Bottom 5 Function button Battery chamber slot Function Description / Information / Up button Flash/ Left button Self-timer/ Right button MENU/OK button Tripod socket Memory card slot Battery chamber cover 010 Battery holder Macro/Play & Pause/ Down button
Identification of features Self-timer lamp Icon Status Description Blinking – For the first 8 seconds, the lamp blinks at 1 second intervals. – For the final 2 seconds, the lamp blinks quickly at 0.25-second intervals. Blinking For the 2 seconds, the lamp blinks quickly at 0.25-second intervals. Blinking A picture will be taken after about 10 seconds and 2 seconds later a second picture will be taken.
Connecting to a power source You should use the rechargeable battery SLB-1137D supplied with the camera. Be sure to charge the battery before using the camera. SLB-1137D rechargeable battery Specification Model SLB-1137D Type Lithium Ion Capacity 1100mAh Voltage 3.7V Charging time (When the camera is turned off) MP3 Approx. 150 MIN Number of images and battery life : Using the SLB-1137D Battery life /Number of images Still image*1 Approx. 115 MIN/ Approx. 230 shots Movie Approx.
Connecting to a power source You can charge the rechargeable battery (SLB-1137D) by using the SAC-47 KIT which consists of the AC adapter (SAC-47) and the USB cable (SUC-C5). When the SAC-47 and SUC-C5 are combined, they can be used as an AC cable. Using an AC cable: Connect the AC (SAC-47) adapter to the USB cable. It can be used as a power cable. Important information about USB cable usage. Use a USB cable (SUC-C5) with the correct specification.
Connecting to a power source How to charge the rechargeable battery (SLB-1137D) Charging LED of the AC Adapter Charging LED Being Charged Before inserting any cables or AC adapter, check the directions and do not insert by force. It may cause breakage of cable or camera. If the charging LED of the AC Charger does not turn on or blink after inserting the rechargeable battery, please check whether the battery is inserted correctly.
Inserting the battery Inserting the memory card Insert the battery as shown. Insert the memory card as shown. – If the camera does not turn on after you have inserted battery, please check whether the battery is inserted with the correct polarity (+/-). – When opening the battery chamber cover, do not force it. This may cause damage to the battery chamber cover. - Turn off the camera’s power before inserting the memory card.
Instructions on how to use the memory card Be sure to format the memory card (see p.89) if you are using a newly purchased memory for the first time, or if it contains data that the camera cannot recognise, or if it contains images captured with a different camera. Turn off the camera power whenever the memory card is being inserted or removed. Repeated use of the memory card will eventually reduce the memory card’s performance. Should this be the case, you will need to purchase a new memory card.
Instructions on how to use the memory card The camera can use SD/ SDHC Memory Cards and MMC (Multi Media Cards). Card pins When using a 256MB MMC memory, the specified shooting capacity will be as follows. These figures are approximate as image capacities can be affected by variables such as subject matter and memory card type.
When using the camera for the first time Charge the rechargeable battery fully before using the camera for the first time. When the camera is turned on for the first time, a menu will be displayed to set date/time, language and battery type in the LCD monitor. This menu will not be displayed after setting up. Set up the date/time, language and battery type before using this camera. Turning on the camera To turn on the camera, press the POWER button or open the camera as shown.
LCD monitor indicator The LCD monitor displays information about the shooting functions and selections. ① ② ③ X5.0 00016 ④ ⑤ ⑳ ⑲ ⑥ ⑱ ⑦ ⑰ ⑧ ⑨ ⑯ ⑮ ⑩ 01:00 PM 2008/03/01 ⑭ ⑬ ⑪ ⑫ Icons Page No. Description 5 Image Size 6 Image Quality/Frame Rate 7 Metering/Stabiliser 8 9 10 Drive mode ISO White Balance Exposure compensation /LongTime Shutter Date/Time OIS Saturation Sharpness/Mic.
Starting the Recording mode Selecting modes How to use the Auto mode You can select the desired working mode using the M (Mode) button located on the back of the camera. How to use the M (Mode) button Select this mode for quick and easy picture taking with minimal user interaction. 00016 01:00 PM 2008/03/01 SCENE SHOOTING Program Directly set various features for shooting.
Starting the Recording mode How to use the Program mode Selecting the automatic mode will configure the camera with optimal settings and you can manually configure various functions. 1. Select the Program mode by pressing the M (Mode) button (p.20). 2. Point the camera towards the subject and compose the image by using the LCD monitor. 3. Press the Shutter button to capture an image. Refer to page 36-41 for more information about the Program mode menus.
Starting the Recording mode Using the Photo Help guide mode Available functions of the photo help guide Function that can be used when focusing is difficult Functions that can be used when the image is blurred Function that can be used when filming in the dark Function that can be used when adjusting the picture brightness Function that can be used when adjusting the picture colour Helps the user learn the correct picture taking method and includes solutions for potential problems that may occur.
Starting the Recording mode How to use the Movie clip mode A movie clip can be recorded for up to 2hours. 00:01:01 1. Select the Movie clip mode by pressing the M (Mode) button.(p.20) 2. Point the camera towards the subject and compose the image by using the STANDBY LCD monitor. 3. Press the Shutter button once and movie clips are recorded for up to 2hours. Movie clips will still be recorded if the Shutter button is released. If you wish to stop recording, press the Shutter button again.
Starting the Recording mode How to use the Scene modes Use the menu to easily configure optimal settings for a variety of shooting situations. 1. Select the Scene mode by pressing the M (Mode) button (p.20). 2. Point the camera towards the subject and compose the image by using the LCD monitor. 3. Press the Shutter button to capture an image. 00016 The scene modes are listed below.
Things to watch out for when taking pictures Pressing the Shutter button down half way. Lightly press the Shutter button to confirm focus and flash battery charge. Press the Shutter button all way down to take the picture. The available memory capacity may vary depending on shooting conditions and camera settings.
Focus lock To focus on a subject not positioned in the centre of the picture, use the focus lock function. The recording mode function can be set up by using the camera buttons. Using the Focus Lock 1. Ensure the subject is in the centre of the autofocus frame. 2. Press the Shutter button halfway. When the green auto focus frame lights up, it means the camera is focused on the subject. Be careful not to press the Shutter button all the way down to avoid taking an unwanted picture. 3.
Shutter button OIS(Optical Image Stabilization) Used for taking an image or recording voice in the Recording mode. The OIS function reduces blurring caused by camera shake when pressing the Shutter button. In Movie clip mode Pressing the Shutter button down fully starts the process for recording a movie clip. Press the Shutter button once and the movie clip is recorded for as long as the available recording time in the memory allows. If you wish to stop recording, press the Shutter button again.
OIS(Optical Image Stabilization) If you operate OIS function using a tripod, the image can be blurred by the vibration of the sensor of the OIS. Turn off the OIS function when use a tripod. If the camera is subjected to an impact it can shake the LCD monitor. if this happens, turn the camera off and then on again. It should then function properly. Operate the OIS function when the battery is efficiently charged ( , ). If the low battery level ( ) is showing, OIS can still be set but will not work.
ZOOM W / T button WIDE Zoom Optical zoom WIDE: Pressing the Zoom W button. This will zoom out from the subject i.e. the subject will appear further away. Pressing the Zoom W button continuously will set the camera to its minimum zoom setting i.e. the subject appears at its furthest from the camera.
Function Description / Info ( ) / Up button Macro ( ) / Down button While the menu is showing, the Up button operates as a direction button. If the menu screen does not appear, information or function descriptions of the current filming image (filming mode) can be accessed through the liquid crystal monitor by pressing the Function description/ Information ( ) button. 00016 00016 Display every piece of information about shooting. 00016 Display the basic information.
Macro ( ) / Down button Types of focus mode and focus range (W: Wide, T: Tele) Mode Auto( Focus Type Focus range Super macro( ) Mode Auto macro( Super macro( Focus range W: 1 - 5 (Wide only) ) Macro( Focus range ) Mode ) ) Auto macro( FUN mode( Focus Type Focus range Super macro( – ) Macro( Super macro Macro Normal Auto macro SCENE Super macro Macro Normal Normal W: 80 - Infinity T: 80 - Infinity W: 5 - Infinity T: 50 - Infinity – Auto macro ) ) DUAL IS mode( Super macro( M
Flash ( ) / Left button When the menu is displayed on the LCD monitor, pressing the Left button makes the cursor shift to the left tab. When the menu is not displayed on the LCD monitor, the Left button operates as the Flash( ) button. Selecting the flash mode 1. Press the Mode button to select a Recording mode with the exception of the Movie clip mode or the DUAL IS mode. (p.20) 2. Press the Flash button until the desired flash mode indicator is displayed on the LCD monitor. 3.
Flash ( ) / Left button Flash mode indicator Icon Flash mode Auto flash Available flash mode, by Recording mode ( : Selectable) Description If the subject or background is dark, the camera flash will operate automatically. If a subject or background is dark, the Auto & Red eye camera flash will work automatically and will reduction reduce the red-eye effect by using the redeye reduction function. Fill in flash The flash fires regardless of the available light.
Self-timer ( ) / Right button When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor shift to the right tab. When the menu is not displayed on the LCD monitor, the Right button operates as the Self-timer ( ) button. This function is used when the photographer would also like to be in the image. If you operate the Self-timer( ) button during the self-timer operation, the self-timer function is cancelled. Use a tripod to prevent camera shake.
Self-timer ( ) / Right button Motion Timer Motion Icon & Self-timer lamp Pressing the Shutter button after setting the Motion Timer Blink (1 second interval) Detecting the subject’s movement Blink (0.25 second interval) No movement is detected Turn on and the image is taken after 2 seconds. The Motion Timer flows are as follows.(Movie Clip mode excluded) Selecting the Motion Timer Pressing the Shutter button Confirming the composition (Within 6 sec.
MENU / OK button Fn button MENU button You can use the Fn button to set the following menus. – When you press the MENU button, a menu related to each camera mode will be displayed on the LCD monitor. Pressing it again will return the LCD to the initial display. – A menu option can be displayed when the following are selected: Movie clip and Still image mode. There is no menu available when the Voice recording or Photo Help Guide mode is selected.
Fn button Fn button: Size How to use the Fn menu You can select the image size appropriate for your application. 1. Press the Fn button in an available mode 2. Select a desired menu by pressing the Up/Down button. And then a sub menu will be displayed on the left side of the LCD monitor. QUALITY SIZE Up/Down button 3. Select a desired menu by pressing the Left/Right button and then press the OK button.
Fn button: Quality / Frame rate Fn button: Metering You can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality. If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures.
Fn button: Drive mode Fn button: ISO You can select continuous shot, and AEB (Auto Exposure Bracketing). You can select the ISO sensitivity when taking pictures. The speed or specific light-sensitivity of a camera is rated by ISO numbers. Single Auto Icon Drive Mode Description [Single] Take one picture only. Images will be taken continuously until the Shutter [Continuous] button is released. This takes 6 shots per second for up to 5 seconds, when the shutter is pressed and held down.
Fn button: White balance The white balance control allows you to adjust the colours to appear more natural. Auto WB Icon White balance Mode Description The camera automatically selects the appropriate white balance settings, depending on the prevailing lighting conditions. [Daylight] For taking images outside. For taking images under a cloudy or overcast [Cloudy] sky. For shooting under daylight fluorescent types [Fluorescent_H] of threeway fluorescent lighting.
Fn button: Exposure compensation Fn button: Slow shutter speed This camera automatically adjusts the exposure according to the ambient lighting conditions. You can also select the exposure value by using the Fn button. This camera automatically adjusts the shutter speed and aperture values to the shooting environment. However, in Night scene mode, you can set the shutter speed and aperture values to your preference. Compensating Exposure 1.
E (Effect) button It is possible to add special effects to your images by using this button. Available Effects, by recording mode Mode E button ( : Selectable) Mode E (Effect) button: Photo Style Selector You can add various effects to the image without using image editing software. Press the E button in an available mode. Soft E button Move E Exit 1. Select the desired Photo style selector by pressing the Left/Right button and press the OK button. 2. Press the Shutter button to take an image.
E (Effect) button: Image editing Press the E button in the [Program], [Movie], [Portrait], [Children], [Landscape], [Close up], [Self Shot], [Food] and [Café] scene modes. Custom colour: You can change the R (Red), G (Green) and B (Blue) values of the image. Color Colour 1. Select the Colour( ) menu by pressing the Up/Down button. 2. Select the desired sub menu by pressing the Left/Right button and press the OK button. 3. Press the Shutter button to take an image.
E (Effect) button: Image editing Sharpness Press the E button in the [Program] mode. 1. Select the Sharpness( ) menu by pressing the Up/Down button and a bar for selecting the sharpness will be displayed. 2. Change the sharpness by pressing the Left/Right button. 3. Press the Shutter button to take an image. Saturation 1. Select the Saturation( ) menu by pressing the Up/Down button and a bar for selecting the saturation will be displayed. 2. Change the saturation by pressing the Left/Right button. 3.
E (Effect) button: Cartoon You can add a text box to the image to make the image cartoon like. The size of Cartoon image is fixed to 1M. Press the E button in the FUN recording mode. 00016 FUN Press the Fn button and select a desired text box position by pressing the Left/Right button. Cartoon Select Cartoon ( Move E Select a desired frame by pressing the Left/Right button and press the OK button. ).
E (Effect) button: Cartoon Changing the cartoon image before taking the last shot Before saving the cartoon image, you can take more images. 1. Select an image to delete by using the Left/Right button. 2. Press the Fn button and the image is deleted. 00016 00016 Pressing the Fn button OK Save Fn Delete SH Capture Fn Edit 3. To take a new image, press the Shutter button. You can select the menu by pressing the MENU button when the cartoon image is taken but not saved in the memory.
E (Effect) button: Pre-set focus frame You can make the subject stand out from its surroundings. The subject will be sharp and in focus while the rest will appear out of focus. The size of High Light image is fixed to under 5M. Moving and changing the focus frame You can change the focus frame after selecting a Range menu. 00016 00016 Press the E button in the FUN recording mode. FUN Pressing the Fn button High Light SH Capture Select High Light ( ).
E (Effect) button: Composite shooting Selecting 2 composite shots You can combine 2 - 4 different shots in a still image. The size of Composite image is fixed to under 5M. 00016 00016 Press the E button in the FUN recording mode. Pressing the Shutter button. FUN Composite SH Capture Select Composite ( ). E Move Exit Composite Composite Composite OK Set Composite Composite OK Set Composite Pressing the Shutter button.
E (Effect) button: Composite shooting Changing a part of composite shot before taking the last shot Changing a part of composite shot after taking the last shot Before taking the last composite shot, you can change a part of composite shot. After taking the last shot, you can change a part of the composite shot. 1. During the composite shots, press the Fn button. 2. A previous image will be deleted and new frame will be displayed. To delete a previously taken image, press the Fn button again.
E (Effect) button: Photo Frame You can add 9 types of frame-like borders to a still image you want to capture. Date & Time information will not be printed on the stored image taken with Photo Frame menu. The size of Photo Frame image is fixed to under 5M. Press the E button in the FUN recording mode. FUN Photo Frame Select Photo Frame ( ). Move E OK Set Frame Exit Pressing the OK button . 00016 00016 Pressing the Fn button. 2. Press the Shutter button to take a picture.
E (Effect) button: Colour Mask With this menu, you can select a part you want to highlight. The rest of the image will be black and white. Press the E button in the FUN recording mode. 00016 00016 Color Mask E Back OK Set Select Color Mask( ) by pressing the OK button and the Mask mark will be displayed on the LCD monitor. Press the Fn button. You can change the size and location of the mask.
Using the LCD monitor to adjust the camera settings You can use the menu on the LCD monitor to set up recording functions. The items indicated by Menu are default settings. Sub menu Center AF Available mode Page Multi AF p.52 [Focus Area] Face Detection Self Portrait [ACB] Off On p.55 [Voice Memo] Off On p.55 Focus Area You can select your preferred Focus Area according to the shooting conditions. 1. Press the MENU button in the selectable mode. 2.
Focus Area Multi AF 1. Select the [Multi AF] submenu by pressing the Up/Down button. Face Detection RECORDING Focus Area ACB Voice Memo Voice Record Back Center AF Multi AF Face Detection Self Portrait This mode detects the face of the subject automatically and then sets the focus and exposure. Select this mode for quick and easy portraits. Selectable modes: [Auto], [Program], [DUAL IS], [Fun], [Photo Help Guide], [Portrait], [Children], [Beach & Snow], [Self Shot], [Café] 1.
Focus Area This function can detect up to 9 people. When the camera recognises many people at the same time, it will focus on the nearest person. The Digital zoom is not activated in this mode. The face detection does not work when setting the effect mode. When the camera detects a target face, the white colour focus frame will be displayed over the target face and the gray colour focus frame appears over the remaining faces(up to 8).
ACB Voice Memo This function is to adjust the contrast automatically when taking photos in an environment with big exposure difference i.e. backlight or contrast. This function adjusts the brightness automatically and allows the subject to be photographed clearly. You can add your voice-over to a stored still image. (Max. 10 sec.) - [ACB] Sub menus: [Off], [On].
Voice recording A voice can be recorded for as long as the available recording time (Max. 10 hour) allows. Press the Shutter button to record a voice. – Press the Shutter button once and voice is recorded for as long as the available recording time (max:10 hour) allows. The recording time will be displayed on the LCD monitor. Voice will still be recorded if the Shutter button is released. – If you wish to stop recording, press the Shutter button again. – File type: *.
Recording the movie clip without voice Starting play mode You can record the movie without voice. Select [Voice Mute] menu in the Movie clip mode. (p.23) ( ) icon will appear on the LCD monitor. Press the Shutter button and a movie will record for as long as the memory capacity allows without voice. RECORDING Voice Mute Back Off On Turn the camera on and select Play mode by pressing the Play mode ( ) button. The camera can now play back the images stored in the memory.
Starting play mode Playing back a movie clip 100-0016 1. Select the recorded movie clip that you want to play back by using the Left/Right button. 2. Press the Play & Pause ( ) button to playback a movie clip file. – To pause a movie clip file while 00:00:02 Play E Capture playing it back, press the Play & Pause ( ) button again. – Pressing the Play & Pause ( ) button again will cause the movie clip file to restart. – To rewind the movie clip while it is playing, press the Left button.
Starting play mode On camera movie trimming You can extract desired frames of movie clip during the movie clip play back. If the running time is under 10 seconds, the movie clip can’t be trimmed. 1. Press the Play & Pause ( ) button 00:00:24 at the point of the movie clip where you T Trim E Capture want to start extracting. 2. Press the T button. 3. Press the Play & Pause ( ) button and the extracted range will be displayed on the status bar. 4.
Starting play mode LCD monitor Indicator Playing back a voice memo The LCD monitor displays shooting information about the displayed image. 1. Select a still image that has the voice memo. 2. Press the Play & Pause ( ) button to play back the voice memo. – To pause the voice memo, while playing it back, press the Play & Pause ( ) button again. – To resume playback of the voice memo, press the Play & Pause ( ) button.
Using the camera buttons to set the camera In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions. Play mode button If you have turned on the camera by pressing the POWER button or opening the lens cover, you can press the Play mode button once to switch to Play mode, and press it again to switch to Recording mode. You can turn the power on with the Play mode button. The camera is turned on in play mode. Press the Play mode button again to turn off the camera.
Using the camera buttons to set the camera Image enlargement 1. Select an image that you want to enlarge and press the Enlargement button. 2. Different parts of the image can be viewed by pressing the 5 function button. 3. Pressing the Thumbnail button will zoom back to the original full sized image. – You can tell whether the image displayed is an enlarged view by x 2.0 checking the image enlargement indicator shown at the top left of the LCD monitor.
Info ( ) / Up button Play & Pause ( When the menu is displayed on the LCD monitor, the UP button operates as a direction button. When the menu is not displayed on the LCD monitor, pressing the Info( ) button will display image information on the LCD monitor. 100-0016 100-0016 Info ( ) button ISO AV TV Flash Size Date 80 3.
Left / Right / Menu / OK button Delete ( ) button Left/Right/MENU/OK button activates the following. This deletes images stored on the memory card. – Left button: While the menu is showing, the Left button operates as a direction button. While the menu is not showing, press the Left button to select the previous image. – Right button: While the menu is showing, the Right button operates as a direction button. While the menu is not showing, press the Right button to select the next image.
E (Effect) button: Resize Change the resolution (size) of pictures taken. Select [Start image] to save an image to be the start-up image. 1. Press the Play mode button and press the E button. 2. Press the Left/Right button and select the [RESIZE] ( ) menu tab. 3. Select a desired sub menu by pressing the Up/Down button and press the OK button. Image Resize Types – A large sized image can be resized to a smaller sized image, but not vice versa. – Only JPEG images can be resized.
E (Effect) button: Rotating an image E (Effect) button: Colour You can rotate the stored images by various degrees. Once the playback of the rotated picture is finished, it will switch back to the original state. It is possible to add colour effects to your images by using this button. 1. Press the Play mode button and press the E button. 2. Press the Left/Right button and select the [ROTATE] ( ) menu tab. 3. Select a desired sub menu by pressing the Up/ Down button. 2.
E (Effect) button: Image editing E (Effect) button: Colour 1. Press the Play button and press the E button. Custom colour You can change the R(Red), G(Green) and B(Blue) values of the image. 2. Select ( ) menu tab by pressing the Left/Right button. ACB Custom Color You can automatically adjust the brightness of the region with big exposure difference from the captured image. E – OK button: Selects / setups the Custom Colour. – Up/Down button: Selects R, G, B.
E (Effect) button: Image editing Brightness control Saturation control You can change the brightness of the image. You can change the saturation of the image. 1. Select ( ) by pressing the Up/Down button and a bar for selecting the brightness will be displayed. 2. Change the brightness by pressing the Left/Right button. 3. Press the OK button and the image will be saved as a new file name. Brightness ◀▶ Move OK Set 1.
E (Effect) button: FUN If the image size is ( ) or ( ), the FUN menu cannot be selected. Cartoon You can add a text box to the image to make the image cartoon like. The cartoon image is saved as 1M image size. Cartoon Select a desired frame by pressing the Left/Right button and then press the OK button. Select Cartoon ). ( E Move Exit Frame Select a desired position by pressing the Up/ Down/Left/Right button and press the OK button.
E (Effect) button: FUN Changing the cartoon image before taking the last shot Before saving the cartoon image, you can change the selected image. Photo Frame You can add 9 types of frame-like borders to a still image you want to capture. Date & Time information will not be printed on the stored image taken with Photo Frame menu. 1. Pressing the Fn button deletes the images in order. 2. Press the OK button and you can select images. FUN Photo Frame Select Photo Frame( ).
E (Effect) button: FUN Preset focus frames You can make the subject stand out from its surroundings. The subject will be sharp and in focus while making the rest out of focus.The High Light image is saved as under 5M image size. High Light FUN Select High Light ( ). Move Range E Exit OK Set Select a desired frame by pressing the Left/Right button and press the OK button. High Light Range High Light OK Set Range 2.
E (Effect) button: FUN Moving and changing the focus frame You can change the focus frame after selecting a Range menu. 1. Select a focus frame by pressing the Left/Right button and press the OK button. 2. Move the location of the frame by pressing the Up/Down/Left/Right button. 3. Press the OK button and the file is saved as a new file name. Composite image You can combine 2 - 4 different shots in a still image. The composite image is saved as under 5M image size. FUN Composite Select Composite ( ).
E (Effect) button: FUN Selecting 2 composite shots Before selecting the last composite image, you can change a part of composite image. ◀ ▶ Move 1. During the composite image editing, press the Fn button. 2. A previous image will be deleted. Press the OK button and you can select a new image. After selecting an image, press the Fn button again and the image will be deleted again. ◀ ▶ ◀ ▶ Pressing the Up/Down/Left/ Right button.
E (Effect) button: FUN Sticker Colour Filter You can add various stickers to the image. The Sticker image is saved as 1M image size. With this menu, you can change the colour information of the image (excluding Red, Blue, Green and Yellow) to Black and White. 1. Select ( FUN Select ( Move E ). Exit FUN Sticker Select a location of sticker by pressing the Up/ Down/Left/Right button. Fn Add 100-0016 074 OK Save ◀ ▶ ◀ ▶ OK Save Move ◀ ▶ Move You can add additional stickers (Max.
E (Effect) button: FUN Colour mask With this menu, you can select a part you want to highlight. The rest of the image will be in black and white. Color Mask FUN Press the OK button and you can set the size and location of the part. Select ( ) and a mark for selecting part will display. E Back E Exit ◀ ▶ OK Set OK Set ◀ ▶ Move T/W Size W/T button: Changing size of part 100-0020 ◀ ▶ OK Set ◀ ▶ Pressing the OK button and the colour mask image will be saved ass a new file name.
Setting up the play back function using the LCD monitor Play mode functions can be changed by using the LCD monitor. In the Play mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as follows. To capture an image after setting up the play menu, press the Play mode button or Shutter button. Menu Tab Main Menu Show Start SLIDE SHOW ( ) PLAY BACK ( ) 076 Sub Menu Play / Repeat Play All Date Sub Menu – Page p.77 – Images p.
Setting up the play back function using the LCD monitor Menu Tab Main Menu Type Quality Date File Name Reset Sub Menu Sub Menu Page Starting the slide show ( Images can be displayed continuously at pre-set intervals. You can view the slide show by connecting the camera to an external monitor. 1. Press the Play mode button and press the MENU button. 2. Press the Left/Right button and select the [SLIDE SHOW] menu tab.
Starting the slide show ( ) Selecting Images Configure slide show effects You can select image to view. Unique screen effects can be used for the slide show. 1 Use the Up/Down button to select the [Image] menu and press the Right SLIDE SHOW Show Start button. All Images 2. Select a desired sub menu by pressing Date▶ Effect Select▶ Interval the Up/Down button. Music [All]: All images saved in the Memory are played back. OK Set Back [Date]: Images taken on a specified date are played back.
Starting the slide show ( ) Setting play interval Setting Background Music Set the slide show play interval. Set the slide show music. 1. Select the [Interval] sub menu by pressing the Up/Down button and press the Right button. 2. Use the Up/Down button to select the desired interval. 3. Press the OK button to save the configuration. SLIDE SHOW Show Start Images Effect Interval Music Back 1 sec 3 sec 5 sec 10 sec OK Set The loading time depends on the image size and quality.
Playback ( ) Voice memo You can add your voice to a stored still image. 100-0016 100-0016 PLAYBACK Voice Memo Off Protect On Delete DPOF Copy To Card 00:00:00 Back OK Set 00:00:06 SH Start SH Stop – Press the Shutter button to add the voice to the image. It will be recorded for 10 seconds. – Press the Shutter button again to stop the recording.
Playback ( ) – OK button: Press the OK button to display the confirmation message. Select the [Yes] menu and press the OK button to delete marked images. [All]: Displays confirmation window. Select the [Yes] menu and press the OK button to delete all unprotected images. If there are no protected images, all the images are deleted and a [No Image!] message will be displayed. DPOF 100-0020 T 1 2 3 4 5 6 Select OK Delete Delete All? No Yes OK Confirm 3.
Playback ( ) Standard Index This function allows you to embed printing quantity information on a stored image. 1. Press the Up/Down button and select the [DPOF] menu tab. And then press the Right button. 2. Press the Right button again and [Standard] sub menu will be displayed. 3. Select a desired sub menu by pressing the Up/Down button and press the OK button. [Select]: Selection window for an image to print is displayed. – Up/Down/Left/Right button: Select an image to print.
Playback ( ) Print size You can specify the print size when printing images stored on the memory card. The [Size] menu is available only for DPOF 1.1 compatible printers. 1. Press the Up/Down button and select the [DPOF] menu tab. And then press Select Standard the Right button. All Index 2. Press the Right button again and select Size Cancel the [Size] sub menu will be displayed. 3. Select a desired sub menu by pressing the Up/Down button and press the OK OK Set Back button.
Playback ( ) When this menu is selected without inserting a memory card, the [No Card!] message will be displayed. If there is not enough space available in the memory card to copy saved images in the internal memory (190MB), the [Copy To Card] command will copy only some of the images and display [Memory Full!] message. Then the system will return to the Playback mode. Please be sure to delete any unnecessary files to free up space before inserting the memory card into the camera.
Sound ( ) Volume You can set select a volume of start up sound, shutter sound, beep sound and AF sound. – [Volume] sub menu: [Off], [Low], [Medium], [High] Beep Sound SOUND Volume Start Sound Shutter Sound Beep Sound AF Sound Self Portrait Back Off Low Medium High – [Beep Sound] sub menu: [Off], [Sound 1, 2, 3] OK Set Start up sound You can select the sound that is activated whenever the camera is turned on.
Setup menu In this mode, you can set up basic settings. You can use the setup menu in all camera modes, except Voice recording mode. The items indicated by Sub menu 한국어 ENGLISH Language DANSK Page FRANÇAIS ESPAÑOL ITALIANO PORTUGUÊS DUTCH SVENSKA SUOMI Date&Time p.87 POLSKI Magyar – – yy/mm/dd Samoa, Midway Honolulu, Hawaii Alaska LA, San Francisco Denver, Phoenix LCD Caracas, La Paz Newfoundland Buenos Aires Mid-Atlantic – Off Logo User Image – Auto Dark Normal Bright 0.
SETUP1 ( ) Language Setting up the Date / Time / Date type There is a choice of languages that can be displayed on the LCD monitor. Even if the battery is removed and inserted again, the language setting will be preserved. You can change the date and time that will be displayed on the captured images and set up the date type. If [World Time] is set in foreign countries, the date and time of the destination will be displayed on the LCD monitor.
SETUP1 ( ) Start up image Quick view You can select the image that is first displayed on the LCD monitor whenever the camera is turned on. If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Quick View] setup. Quick view is possible only with still images. – Sub menus: [Off], [LOGO], [User Image] – Use a saved image for the start-up image with the [Start Image] in the [RESIZE] menu in the play mode.
SETUP2 ( ) Formatting a memory If you run [Format] on the memory, all files which are image, video clip, multimedia, world tour guide and even protected images will be deleted. So be sure to download important files to your PC before formatting the memory. – Sub menus [No]: The memory will not be formatted.
SETUP2 ( ) File name This function allows the user to select the file naming format. SETUP2 Format Reset File Imprint Power Off Video Out Back File name Reset Series OK Set Description [Reset] After using the reset function, the next file name will be set from 0001 even after formatting, deleting all or inserting a new memory card. [Series] New files are named using numbers that follow the previous sequence, even when a new memory card is used, or after formatting, or after deleting all pictures.
SETUP2 ( ) Imprinting the recording date Auto power off There is an option to include DATE/TIME on still images. This function switches the camera off after a set amount of time in order to prevent unnecessary battery drainage. – Sub menus [Off]: The [DATE&TIME] will SETUP2 not be imprinted on the Format image file. Reset File [Date]: Only the [DATE] will be Off Imprint imprinted on the image Date Power Off file.
SETUP2 ( ) Selecting video out type The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI. Yellow - Video White - Sound Connecting to an external monitor When the camera is connected to an external monitor, the image and menus on the LCD monitor will be visible on the external monitor and the LCD monitor of the camera.
SETUP2 ( ) PictBridge Auto focus lamp You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. Movie clips and voice files cannot be printed. You can turn on and off the Auto Focus lamp. – Sub menus [Off]: The AF lamp will not light up in low light conditions. [On]: The AF lamp will light up in low light conditions.
PictBridge PictBridge: Picture Selection If the [USB] menu is set to the [Computer], you cannot connect a Pictbridge compatible printer to the camera through USB cable with [Connecting Computer] message. In this case, remove the cable and do steps 1 and 2 again. Easy printing When you connect the camera to printer in the Play back mode, you can print a picture easily. – Pressing the Left/Right button: Selects a previous / next image.
PictBridge: Print Setting PictBridge: Reset You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and File Name Print menus for printed pictures. Initialises user-changed configurations. 1. Press the MENU button and the PictBridge menu will be displayed. 2. Use the Up/Down button to select the desired menu, and then press the Right button. 3. Use the Up/Down button to select the desired sub menu value, and then press the OK button.
MP3 / PMP / TEXT VIEWER mode This camera has an embedded MP3, TEXT VIEWER & Portable Media Player program. You can take a picture, listen to the MP3 files and watch the movie clip (Movie and Video clip) whenever you want. To use the PMP mode, you must convert the multimedia file with the Samsung Converter. In the TEXT VIEWER mode you can see the text on the LCD monitor with listening MP3 music. If the file or folder name is over 120 (Including 1 Byte/2 Byte language, Korean, Chinese, etc.
Starting the MP3 / PMP / TEXT VIEWER mode Be aware of the illegal duplication of MP3 & multimedia files. It violates various copyright laws. Without permission of Samsung, you cannot copy, modify and/or distribute any part or all of MP3, PMP file provided in the internal memory. This camera can only play back MP3 files in the MP3 mode and SDC files (modified XviD MPEG4 video / MPEG Layer2 audio type) in the PMP mode.
Starting the MP3 / PMP / TEXT VIEWER mode 03-Audio Track 03.mp3 01-Audio Track 01.mp3 Move OK Select [SDC]-move sample.sdc Who bent my camera? Move OK Select TEST.TXT TEST.TXT Thank you for buying a Samsung Camera. This manual will guide you through using the camera, includin capturing images, downloading images and using the application software. Please read this manual carefully before using your new camera. Move 098 OK Select When the [Resume] menu (p.
LCD monitor indicator for MP3 / PMP / TEXT VIEWER mode The LCD monitor displays information about the MP3, multimedia and Text file. MP3 mode Battery (p.15) Lock (p.101) Equalizer (p.101) Mute (p.100) Playing time Current page/Whole page Indication of present TEXT TEXT VIEWER mode Battery (p.15) TEST.TXT Thank you for buying a Samsung Camera. Encoding Type (ANSI, Uni) Volume Indication (p.
Using the camera buttons to adjust the camera Volume button Delete button You can control the volume with this button. There are 0 - 30 steps. This deletes files stored on the memory. – Mute ( ): You can mute the MP3 sound with the Up button. Play & Pause / Seeking button When a file is playing back, press the Down button to pause the file. Pressing it again will resume playback. MP3 mode You can search the MP3 files by pressing the Left/Right button.
Using the camera buttons to adjust the camera Hold / Equalizer button If you press the Hold button for more than 1 second, the camera buttons are locked. – If the camera buttons are locked, the buttons can’t be operated while playing back. But Power off, Video out, USB connection and LCD on functions can be operated. Playlist button While a multimedia file is playing back, you can select a desired file by using the browsing menu. ) button. 1. While a multimedia file is playing back, press the Playlist ( 2.
Setting up the playback function using the LCD monitor MP3 / PMP / Text Viewer mode functions can be changed by using the LCD monitor. Press the MENU button and the menu will be displayed on the LCD monitor. Menu tab Main menu RESUME PLAY MODE MP3 SKIN MP3 Play All Repeat One Repeat All Shuffle Default 1 Default 2 User Skin 1 User Skin 2 p.103 p.103 AUTO SCROLL p.104 MP3 BGM Play/Repeat Play 2, 3, 5 sec DELETE ALL No Yes p.104 DRM License Information - - p.105 RESUME On Off p.
Setting up the playback function using the LCD monitor Resume Play mode You can set the playback type. You can set various repeat and shuffle options. This function is adopted only in the selected folder. 1. Press the MENU button in each mode. 2. Select a desired playing type in the [Resume] menu by pressing the Up/Down button and pressing the OK button. RESUME On Off Move RESUME On Off Exit [Off]: [On]: Move RESUME On Off Exit Move [Play All]: Plays a single track once.
Setting up the playback function using the LCD monitor Playing back the slide show Delete all While the MP3 file is playing back, captured images are displayed on the LCD monitor continuously. All files stored on the memory card will be deleted. In the MP3 mode, only MP3 files are deleted. In the PMP mode, only multimedia files are deleted. In the TEXT VIEWER mode, TEXT files are deleted. [Play]: Display the images once. [Repeat Play]: Display the images continuously.
Setting up the playback function using the LCD monitor Display setting Setting up the recording function in the MP3 mode You can set the play back function display on the LCD. You can take a picture and listen to the MP3 files at the same time. [5 sec]: If there is no operation for PLAYER DISPLAY 5 seconds, Menu bar will 5sec disappear. On Off [On]: Menu bar will appear on the LCD monitor. [Off]: Menu bar will not appear on Exit Move the LCD monitor. To see the caption, insert the caption file (.
Setting up the playback function using the LCD monitor MP3 BGM Setting You can play MP3 files when you are playing the text. You cannot play the MP3 files. When you are playing the text, you can play the MP3 files. The last played MP3 files will be executed. You can get around the world useful travel information. The travel information supports Korean, English, Chinese, German, French and Russian and the language can vary depending on sales region.
World tour guide World Tour Guide mode Select the World Tour Guide mode SHOOTING MULTIMEDIA Travel Guide This mode provides tour information for famous tourist destinations around the SCENE Fn Back Fn OK Select Select the desired tour site by pressing the Up/Down/Left/Right button and press the OK button. Starting the world tour guide Back OK Select Select the tour place by pressing the Left/Right/Up/Down button. You will find the detailed information and pictures.
World tour guide 3 Select [Yes] to add bookmark. You can confirm the added bookmark in the Bookmark list. You can select desired function. Bookmark World time Bookmark list Information Language BOOKMARK Do you want to bookmark this region? No Sound Yes Move Exit Move Bookmark list MENU [Bookmark list]: Select the [Bookmark list] on the menu bar and the bookmark list will appear. – Press the MENU button to display the tour guide information.
World tour guide Saving the information of some sites may take long time. Save each piece of site information If the downloaded files are changed by any non-official methods, the files don’t playback on the camera. Formating the camera deletes all data on the memory (including protected images, Movies, Multi media files and Tour Information). Copy the files to a computer before formating the memory.
Important notes – This camera is not waterproof. To avoid dangerous electrical shocks, never hold or operate the camera with wet hands. – If you use this camera in wet places, such as beach or pool, do not let water or sand get inside the camera. Doing so may result in failure or may permanently damage the unit. Extremes in temperature may cause problems. – If the camera is transferred from a cold to a warm and humid environment, condensation can form on the delicate electronic circuitry.
Warning indicator There are several warnings that may appear on the LCD display. [ Card Error ! ] • Memory card error. Turn off the camera power and turn it on again. Insert the memory card again. Insert and format the memory card. (p.89) [ Card Locked! ] • The memory card is locked. SD/SDHC memory card: Slide the write protect switch to the top of the memory card. [ File Error! ] • File error. Delete the file. • Memory card error. Contact a camera service centre.
Before contacting a service centre Please check the following. The camera doesn’t switch on. • There is low battery capacity. Insert fresh batteries. (p.15) • Battery is inserted incorrectly with the polarities reversed. Insert the battery according to the polarity marks (+, -). The camera power ceases while in use. • The battery is exhausted. Insert fresh batteries. • The Camera is turned off automatically. Turn on the camera power again.
Before contacting a service centre The camera doesn’t focus on the subject. • A picture was taken of a subject without setting an appropriate macro mode. Select an appropriate macro mode to take a clear image. • The camera is damaged. Turn the camera off and on again. The images are unclear. • Taking a picture beyond the flash range. Take a picture within the flash range. • The lens is smudged or dirty. Clean the lens. The flash does not fire. • Flash off mode has been selected. Dis-engage flash off mode.
Specifications Image Sensor – Type: 1/2.33” CCD – Effective Pixel: Approx. 10.2 Mega-pixel – Total Pixel: Approx.10.4 Mega-pixel Lens – Focal Length: Samsung Lens f = 6.7 - 20.1 mm (35mm film equivalent: 38 - 114 mm) – F No.: F3.5(W) - F4.0(T) – Digital Zoom: Still Image mode: 1.0X - 5.0X Play mode: 1.0X - 12.0X (depends on image size) LCD Monitor – 3.
Specifications – Movie Clip • With Audio or without Audio (user selectable, recording time : memory capacity dependent, max 2hours) • Size: 800x592, 640x480, 320x240 • Optical Zoom with sound recording • Frame rate: 30 fps, 20 fps, 15 fps (20 fps for 800x592) • Optical Zoom up to 3.
Specifications Multi function – MP3, PMP, World Tour Guide, Text Viewer, Portable Memory, Voice Recorder Interface – – – – Digital output connector: USB 2.0 High Speed Audio: Mono Video output: NTSC, PAL (user selectable) DC Adapter: 4.2V, 20 pin connector Power Source – Rechargeable battery: SLB-1137D, 3.7V (1100mAh) – Adaptor: SAC-47(DC 4.2V, 400mA) Included battery may vary depending on sales region. Dimensions (WxHxD) – 94.5 x 59.6 x 21.
Specifications Software notes Please ensure that you read the instruction manual carefully before use.
System requirements About the software After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following window should automatically display. For Windows PC with processor better than Pentium 450MHz (Pentium 800MHz recommended) * Samsung Converter PC with processor better than Pentium III 500MHz (Pentium IV recommended) For Macintosh Power Mac G3 or later, or Intel Processor Camera driver: This enables images to transfer between the camera and PC.
About the software Setting up the application software Samsung Converter: Multimedia converting program To use this camera with a PC, install the application software first. Multimedia (Movie, Video clip, etc) files can be converted into movie clips that can be played back on this camera. This software is only compatible with Windows. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program.
Setting up the application software 3. To play back the movie clip recorded with this camera on the computer, install the XviD codec. The XviD codec is distributed according to the GNU General Public License and everyone can copy, distribute and change this codec. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. For more information, see the License documents (http://www.
Setting up the application software 4. Install the software by following instructions on the monitor.
Setting up the application software 5. After restarting the computer, connect the PC to the camera with the USB cable. 6. Turn the camera power on. The [Found New Hardware Wizard] will open and the computer will recognise the camera. If your OS is Windows XP/ Vista, an image viewer program will open. If the download window of Samsung Master opens after starting Samsung Master, the camera driver was set up successfully.
Starting PC mode If you connect the USB cable to a USB port on your PC and then turn on the power, the camera will automatically switch to “computer connection mode”. In this mode, you can download stored images to your PC through the USB cable. Connecting the camera to a PC Camera settings for connection 1. Turn on the camera 2. Connect the camera and computer with the supplied USB cable. 3. Turn on the computer. The camera and computer are connected. 4.
Starting PC mode Downloading stored images You can download the still images stored on the camera to your PC’s hard disk and print them or use a photo editing software to edit them. 4. A pop-up menu will open. Click the [Cut] or [Copy] menu. – [Cut]: cuts a selected file. – [Copy]: copies files. 1. Connect the camera to your PC with the USB cable. 2. On your computer’s desktop display, select [My computer] and double click [Removable Disk DCIM 100SSCAM]. The image files will then be displayed. 5.
Starting PC mode – By using [Samsung Master], you can see the stored images in the memory directly on the PC monitor and you can copy or move the image files. We recommend that you should copy the images to the PC to view them. Opening images directly from the removable disk may be subject to unexpected disconnection.
Removing the removable disk 5. A [Safe to Remove Hardware] window will open. Click the [OK] button. 6. An [Unplug or Eject Hardware] window will open. Click the [Close] button and the removable disk will be removed safely. 7. Unplug the USB cable. Setting up the USB Driver for MAC 1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver. 2. Check the MAC OS version during start-up. This camera is compatible with MAC OS 10.1 - 10.4. 3.
Removing the USB Driver for Windows 98SE To remove the USB driver, refer to the process shown below. 1. Connect the camera to your PC and turn them both on. 2. Check whether the Removable Disk is on the [My Computer]. 3. Remove the [Samsung Digital Camera] on the Device manager. 4. Disconnect the USB cable. 5. Remove the [Samsung USB Driver] on the Add/Remove Programs Properties.
Samsung Converter 7. You can play back the converted movie clip in the Play mode of the camera. Refer to the [Help] menu in Samsung Converter for further information. Who bent my camera? Before converting a multimedia file, check whether it plays back correctly on the Windows Media Player. The converted files are saved as *.sdc file type that can be played back on the Windows Media Player. The Samsung Converter doesn’t cover every kind of codec.
Samsung Master You can download, view, edit and save your images and movies with this software. This software is only compatible with Windows. To run the Samsung Master, double click the Samsung Master icon on the desktop. Downloading images 1. Connect the camera to your PC. 2. A window for downloading images will display after connecting the camera to your PC. – To download the captured images, select the [Select All] button. – Select desired folder in the window and click the [Select All] button.
Samsung Master Image viewer: You can view the stored images. – Image viewer functions are listed below. ① Menu bar: You can select menus. File, Edit, View, Tools, Change functions, Auto download, help, etc. ② Image selection window: You can select the desired images in this window. ③ Media type selection menu: You can select image viewer, image edit and movie edit functions in this menu. ④ Preview window: You can preview an image or a movie clip and check the multi media information.
Samsung Master Movie edit: You can get the still image, movie clip, narration, music files together in a movie clip. ② Frame display window: You can insert multi media in this window. Some movie clips that were compressed with a codec that is not compatible with the Samsung Master can’t play back in the Samsung Master. Refer to the [Help] menu in Samsung Master for further information. – Movie clip edit functions are listed below. ① Edit menu:You can select the following menus.
FAQ Please check the following if the USB connection malfunctions. Case 1 USB cable is not connected or it is not the supplied USB cable. Connect the supplied USB cable. Case 2 The camera is not recognised by your PC. Sometimes, the camera may appear under [Unknown Devices] in Device Manager. Install the camera driver correctly. Turn off the camera, remove the USB cable, plug in the USB cable again, and then turn on the camera. Case 3 There is an unexpected error during file transfer.
FAQ When the movie clip doesn’t play back on the PC When the movie clip recorded by the camera doesn’t play back on the PC, the causes are mostly due to the codec installed on the PC. When the codec to play back the movie clip isn’t installed Install the codec as listed below. [Installing codec for Windows] Installing the XviD codec 1) Insert the CD provided with the camera. 2) Run the windows explorer and select [CD-ROM drive:\XviD] folder and click the XviD-1.1.2-01112006.exe file.
FAQ If a PC connected with the camera stops responding while Windows is starting. In this case, disconnect the PC and the camera and Windows will start. If the problem happens continuously, set the Legacy USB Support to disable and re-start the PC. The Legacy USB Support is in the BIOS setup menu. (The BIOS setup menu differs from the PC manufacturers and some BIOS menus don’t have Legacy USB Support) If you can’t change the menu by yourself, contact to the PC manufacturer or BIOS manufacturer.
FCC notice NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
