Getting to Know your camera Instructions Use this camera in the following order. Setting up the application software Take a picture Insert the USB cable Check the camera's power Check [Removable Disk] To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. (p.79) Take a picture. (p.
Danger Warning DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Do not attempt to modify this camera in any way. To do so may result in fire, injury, electric shock or severe damage to you or your camera. internal inspection, maintenance and repairs should only be carried out by your dealer or Samsung Camera Service centre.
Caution CAUTION indicates a potentially hazardous situation which, if not avoided, may result in a minor or moderate injury. Leaking, overheating, or damaged battery could result in fire or injury. - Use battery with the correct specification for the camera. - Do not short circuit, heat or dispose of battery in fire. - Do not insert the battery with the polarities reversed. Remove the battery when not planning to use the camera for a long period of time.
Contents 021 022 022 022 022 024 025 026 027 028 030 031 032 032 033 033 034 034 035 035 036 036 037 4 Things to Watch Out for When Taking Pictures Using the camera buttons to set the camera POWER button SHUTTER button ZOOM W / T button Face Detection(FD) button Function Description / Info / Up button Macro / Down button Focus lock Flash / Left button Self-timer / Right button MENU / OK button E (Effect) button E (Effect) button : Colour Fn button How to use the Fn menu Size Quality / Frame rate Metering
Contents 046 046 046 047 047 048 048 049 049 Settings Formatting a memory Initialisation File name Imprinting the recording date Auto power off Selecting Video out type Auto Focus lamp Selecting a battery type PLAY 050 Starting play mode 50 050 050 051 051 051 052 052 052 054 054 055 055 055 056 Playing back a still image Playing back a movie clip Movie clip capture function Playing back a recorded voice Playing back a voice memo LCD monitor Indicator Using the camera buttons to set the camera Thumbnai
Contents SOFTWARE 077 Software Notes 77 6 077 078 079 081 084 085 088 088 089 System Requirements About the software Setting up the application software Starting PC mode Removing the removable disk Samsung Master Setting up the USB Driver for MAC Using the USB Driver for MAC FAQ
System chart Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre. Included items Camera AA Alkaline Batteries AD81-00867A USB cable AD81-00734A User manual, Product warranty AD68-03325A SD/SDHC memory card / MMC (see p.
Identification of features Front & Top Mode dial Shutter button Power button Speaker Flash Self-timer lamp / AF sensor Lens/ Lens cover USB / AV connection terminal DC input connection port Microphone 8
Identification of features Back Camera status lamp Zoom W button (Thumbnail) Zoom T button (Digital zoom) Face Detection(FD) button E (Effects) button LCD monitor Strap eyelet Fn / Delete button 5 function button Play mode / Printer button 9
Identification of features Bottom / 5 Function button Battery chamber cover Self-timer lamp Memory card slot Icon ✢ Battery chamber Tripod socket Status Description - For the first 7 seconds, the lamp blinks at 1 second intervals. Blinking - For the final 3 seconds, the lamp blinks quickly at 0.25-second intervals. ✡ Blinking For the 2 seconds, the lamp blinks quickly at 0.25-second intervals.
Identification of features Connecting to a Power Source Mode icon We recommend batteries for a digital camera (Within a year from the date of manufacture). The batteries are listed below. - Non rechargeable batteries : 2 X AA Alkaline (High Capacity) - Rechargeable batteries (Optional) : SNB-2512 (Ni-MH) Refer to page 16 for more information about the camera mode setting.
Connecting to a Power Source Inserting the memory card Insert the battery as shown Insert the memory card as shown. - If the camera does not turn on after you have inserted battery, please check whether the battery (+ / -). - When the battery chamber cover is opened, do not force the battery chamber cover, this may damage it. - Turn off the camera’s power before inserting the memory card.
Instructions on how to use the memory card Be sure to format the memory card (see p.46) if you are using a newly purchased memory card for the first time, if it contains data that the camera cannot recognise, or if it contains images captured with a different camera. Turn off the camera power whenever the memory card is being inserted or removed. Repeated use of the memory card will eventually reduce the memory card’s performance. Should this be the case, you will need to purchase a new memory card.
Instructions on how to use the memory card The camera can use SD/SDHC Memory Cards and MMC (Multi Media Cards). When using a 256MB MMC memory, the specified shooting capacity will be as follows. These figures are approximate as image capacities can be affected by variables such as subject matter and memory card type.
LCD monitor indicator The LCD monitor displays information about the shooting functions and selections. [Image & Full Status] No. Description 1 Recording mode Optical / Digital Zoom bar / Digital Zoom rate Voice Memo / 3 Without Sound Number of available shots remaining 4 Remaining time Icons Page p.11 2 p.22 Ï/Ç p.39/41 4 p.14 00:00:00 p.14 No. Description Icons Page 5 Memory card icon / Internal memory icon Ö/× - 6 Battery p.12 7 Image Size p.
Starting the recording mode How to use the Auto mode ( μ ) How to use the Program mode ( ) Select this mode for quick and easy picture taking with minimal user interaction. Selecting the automatic mode will configure the camera with optimal settings. You can still manually configure all functions except the aperture value and shutter speed. 1. Insert the batteries (p.12). Insert the batteries taking note of the polarity (+ / -). 2. Insert the memory card (p.12).
Starting the recording mode How to use the Manual mode ( ¸ ) How to use the DIS mode ( ) You can manually configure all functions aperture value and shutter speed. Digital Image Stabilisation (DIS) mode. This mode will reduce the effect of camera shake and help you get a well-exposed image in dim conditions. 1. Select the MANUAL mode by rotating the mode dial. 2. Press the Fn button and menu for the shutter speed and aperture value will display.
Starting the recording mode Using the Photo Help guide mode ( ` ) Available functions of the photo help guide Function that can be used when focusing is difficult Functions that can be used when the image is blurred Function that can be used when filming in the dark Function that can be used when adjusting the picture brightness Function that can be used when adjusting the picture colour Helps the user learn the correct picture taking method and includes solutions for potential problems that ma
Starting the recording mode How to use the Portrait mode ( ) Please select this mode for quick and easy portraits. Select Portrait mode using mode dial. The scene modes are listed below. [Nightscene] ( ) : Use this for shooting still images at [Children] ( ) : To take a picture of fast moving [Landscape] ( ) : To take pictures of distant scenery. [Close Up] ( ) : Close-up shooting for small objects [Text] ( ) : Use this mode to shoot a document. night or in other dark conditions.
Starting the recording mode How to use the Movie clip mode ( ´ ) Pausing while recording a movie clip (Successive Recording) A movie clip can be recorded for as long as the available recording time of the memory capacity allows. This camera allows you to temporarily stop during unwanted scenes, while recording a movie clip. Using this function, you can record your favourite scenes into a movie clip without having to create multiple movie clips. 1. Select the Movie clip mode by rotating the Mode dial.
Things to Watch Out for When Taking Pictures Pressing the shutter button down half way. Lightly press the shutter button to confirm focus and flash battery charge. Press the shutter button all way down to take the picture. [Lightly press the shutter button] [Press the shutter button] Under certain conditions the auto focus system may not perform as expected. - When photographing a subject that has little contrast. - If the subject is highly reflective or shiny.
Using the camera buttons to set the camera ZOOM W / T button The recording mode function can be set up by using the camera buttons. If the menu is not displayed, this button works as the OPTICAL ZOOM or DIGITAL ZOOM button. This camera has a 5X optical zoom and a 5X digital zoom function. Using both will offer a total zoom ratio of 25X. POWER button Used for turning the camera’s power on / off.
ZOOM W / T button WIDE Zoom Optical zoom WIDE Images taken using the digital zoom may take a little longer for : Pressing the ZOOM W button. This will zoom out from the subject i.e. the subject will appear further away. Pressing the ZOOM W button continuously will set the camera to its minimum zoom setting i.e. the subject appears at its furthest from the camera.
Face Detection(FD) button Face Detection(FD): This mode detects the face position of the subject automatically and then sets the focus and exposure. Select this mode for quick and easy face picture. Ä Selectable modes: Auto, Program, Manual, DIS, Portrait, Children, Beach & Snow, Self Shot, Café 1. Press the FD(Face Detection) button ( ) in the selectable modes. The FD icon will be displayed on the screen left side. 2.
Face Detection(FD) button Function Description / Info ( î ) / Up button Self Portrait While the menu is showing, the Up button operates as a direction button. If the menu screen does not appear, information or function descriptions of the current filming image (filming mode) can be accessed through the liquid crystal monitor by pressing the Function description/ Information ( î ) button.
Macro ( e ) / Down button While the menu is showing, press the DOWN button to move from the main menu to a sub menu, or to move down the sub menu. When the menu is not showing, you can use the MACRO / DOWN button to take macro pictures. The distance ranges are shown below. Press the Macro button until the desired macro mode indicator appears on the LCD monitor.
Macro ( e ) / Down button Focus lock Available focusing method, by recording mode ( o : Selectable, " : Infinity focus range) To focus on a subject not positioned in the centre of the picture, use the focus lock function. Mode Auto macro Š ‰ ✆ ÿ _ † o Mode Super macro Macro Normal o o o o o o o o o o o o Macro Normal o o o SCENE Auto macro Super macro Using the Focus Lock 1. Ensure the subject is in the centre of the autofocus frame. 2. Press the SHUTTER button halfway.
Flash ( # ) / Left button When the menu is displayed on the LCD monitor, pressing the LEFT button makes the cursor shift to the left tab. When the menu is not displayed on the LCD monitor, the LEFT button operates as the FLASH button. If you press the shutter button after selecting the Auto, Fill-in, [Selecting the Auto flash] Selecting the flash mode 1. Press the Mode button to select a RECORDING mode with the exception of the Movie clip mode or the DIS mode.(p.16) 2.
Flash ( # ) / Left button Flash mode indicator Icon ^ ] # Flash mode Auto flash Auto & Red eye reduction Fill in flash Description If the subject or background is dark, the camera flash will operate automatically. If a subject or background is dark, the camera flash will work automatically and will reduce the red-eye effect by using the red-eye reduction function. The flash fires regardless of the available light.
Self-timer ( ✢ ) / Right button When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor shift to the right tab. When the menu is not displayed on the LCD monitor, the RIGHT button operates as the Self-timer ( ✢ ) button. This function is used when the photographer would also like to be in the image. If you operate the Self-timer button during the self-timer operation, the self-timer function is cancelled. Use a tripod to prevent the camera from shaking.
Self-timer ( ✢ ) / Right button MENU / OK button Motion Timer MENU button - When you press the MENU button, a menu related to each camera mode will be displayed on the LCD monitor. Pressing it again will return the LCD to the initial display. - A menu option can be displayed when the following are selected : MOVIE CLIP and STILL IMAGE mode. There is no menu available when the voice recording function is selected.
E (Effect) button It is possible to add special effects to your images by using this button. Available Effects, by recording mode † Š ‰ ✆ â o o o o o o o 1. Select a desired sub menu by pressing the Up/Down button and press the OK button. ( o : Selectable) Icon „ … ˆ ä Û o o o o This button will not operate in DIS, Voice recording mode and some scene modes (Nightscene, Text, Sunset, Dawn, Backlight, Firework, Beach&Snow).
Fn button How to use the Fn menu You can use the Fn button to set the following menus. ( o : Selectable) Š ‰ ✆ ÿ _ ³ † Page Size o o o o o o o p.34 Quality/ Frame rate o o o o o o o p.34 Metering o o o o p.35 Drive o ISO o o White Balance o o EV o o o 1. Press the Fn button in an available mode. 2. Select a desired menu by pressing the Up / Down button. And then a sub menu will be displayed at the bottom right of the LCD monitor. p.35 SIZE p.
Size Quality / Frame rate You can select the image size appropriate for your application. You can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality. (Unit: pixel) Icon Still image mode , ; .
Metering Drive mode If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures. You can select continuous shot, and AEB (Auto Exposure Bracketing). [Multi] : Exposure will be calculated based on an average of the available light in the image area. METERING However, the calculation will be biased towards Multi the centre of the image area. This is suitable for general use.
ISO White balance You can select the ISO sensitivity when taking pictures. The speed or specific light-sensitivity of a camera is rated by ISO numbers. The white balance control allows you to adjust the colours to appear more natural. [Auto] : The camera's sensitivity is automatically changed by variables such as lighting value or subject brightness.
White balance Exposure compensation Using the Custom White Balance This camera automatically adjusts the exposure according to the ambient lighting conditions. You can also select the exposure value by using the Fn button. White balance settings may vary slightly depending on the shooting environment. You can select the most appropriate white balance setting for a given shooting environment by setting up the custom white balance. 1.
Recording ( You can use the menu on the LCD monitor to set up recording functions. The items indicated by are default settings. Sharpness Mode Menu Sub menu Soft+ Sharpness ( Recording ) Available mode Soft Normal Vivid Vivid+ - Foucs Area Center AF Multi AF p.39 Voice Memo Off On p.39 Voice Record Voice Mute - Off Nightscene Scene p.41 Children Landscape Close up Text Sunset Dawn Backlight Firework Café p.38 p.
) Auto Focus type You can add your voice-over to a stored still image. (Max. 10 sec.) RECORDING Sharpness Foucs Area Voice Memo You can select your preferred Focus Area according to the shooting conditions. Voice Memo Center AF Multi AF Voice Record Back Sharpness Foucs Area Voice Memo Voice Record OK Set [Center AF] : The rectangular area in the center of the LCD monitor will be focused [Multi AF] : This camera selects all of available AF point from the 9 AF points.
Recording ( ) Pausing while recording a voice Voice Recording A voice can be recorded for as long as the available recording time (Max. 10 hour) allows. RECORDING Sharpness Normal Foucs Area Center AF Voice Memo Off SH Voice Record Press the shutter button to record a voice. - Press the shutter button once and voice is recorded for as long as the available recording time (max:10 hour) allows. The recording time will be displayed on the LCD monitor.
Recording ( Sound menu ) In this mode, you can set up sound settings. You can use the setup menu in all camera modes, except Voice Recording mode. The items indicated by are default settings. Recording the movie clip without voice You can record the movie without voice. RECORDING Voice Mute Select [On] of [Voice Mute] menu in the Movie clip mode. ( Ç ) icon will appear on the LCD monitor. Press the Shutter button and a movie will record for as long as the memory capacity allows without voice.
Sound ( ) Volume Beep Sound You can select a volume of start up sound, shutter sound, beep sound and AF sound. If you set sound to ON, various sounds will be activated for camera startup, when buttons are pressed, so that you can be aware of the camera operation status.
Setup menu In this mode, you can set up basic settings. You can use the setup menu in all camera modes, except Voice Recording mode. The items indicated by are default settings. Mode Sub menu Menu Mode Date & Time Page " Language p.
Display ( " ) Language Setting up the Date / Time / Date type There is a choice of language that can be displayed on the LCD monitor. Even if the battery is removed and inserted again, the language setting will be preserved. You can change the date and time that will be displayed on the captured images and set up the date type. Setting [World Time] enables you to display the local date and time on the LCD monitor when travelling overseas.
Display ( " ) Start up image Quick view You can select the image that is first displayed on the LCD monitor whenever the camera is turned on. If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Quick View] setup. Quick view is possible only with still images.
Settings ( ” ) Formatting a memory Initialisation This is used for formatting the memory. If you run [Format] on the memory, all images, including the protected images, will be deleted. Be sure to download important images to your PC before formatting the memory. All camera menu and function settings will be restored to their default values. However, values for DATE / TIME, LANGUAGE, and VIDEO OUT will not be changed. 46 - Sub menus [No] : Settings will not be restored to their defaults.
Settings ( ” ) File name Imprinting the recording date This function allows the user to select the file naming format. There is an option to include DATE / TIME on still images. [Reset] : After using the reset function, SETTINGS the next file name will be set Format from 0001 even after formatting, Reset Reset File deleting all or inserting a new Imprint Series memory card.
Settings ( ” ) Auto power off Selecting Video out type This function switches the camera off after a set amount of time in order to prevent unnecessary battery drainage. The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI. : The power off function SETTINGS Format will not operate.
Settings ( ” ) Auto Focus lamp You can turn on and off the Auto Focus lamp. - Sub menus [Off] : The AF lamp will not light up in low light conditions. [On] : The AF lamp will light up in low light conditions. SETTINGS Reset File Imprint Power Off Video Out AF Lamp Off On OK Back Set Selecting a battery type If a battery type is selected, the camera will be optimized according to the selected battery type.
Starting play mode Turn the camera on and select Play mode by pressing the play mode button ( Î ). The camera can now play back the images stored in the memory. If the memory card is inserted in the camera, all the camera functions apply only to the memory card. If the memory card is not inserted in the camera, all the camera functions apply only to the internal memory. Playing back a movie clip 1. Select the recorded movie clip that you want to play back by using the Left/Right button. 2.
Starting play mode Movie clip capture function Playing back a recorded voice You can capture still images from the movie clip. 1. Select the recorded voice that you want to play back by using the Left/Right button. 2. Press the play & pause button ( Ø ) to play back a recorded voice file. Play - To pause a recorded voice file, while playing it back, press the play & pause button again.
LCD monitor Indicator Using the camera buttons to set the camera The LCD monitor displays shooting information about the displayed image. In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions. Thumbnail ( º ) / Enlargement ( í ) button You can view multiple pictures, enlarge a selected picture, and crop and save a selected area of an image. No.
Thumbnail ( º ) / Enlargement ( í ) button The maximum enlargement rate in proportion to the image size Image enlargement 1. Select an image that you want to enlarge and press the enlargement button. 2. Different parts of the image can be viewed by pressing the 5 function button. 3. Pressing the thumbnail button will zoom back to the original full sized image.
Info( î ) / Up button Play & Pause ( Ø ) / Down button When the menu is displayed on the LCD monitor, the UP button operates as a direction button. When the menu is not displayed on the LCD monitor, pressing the Info button will display image information on the LCD monitor. In Play mode, the play & pause/ down button works as follows: Info ( î ) button Info ( î ) button - If the menu is displayed Press the DOWN button to move from the main menu to a sub menu, or to move down the sub menu cursor.
Left / Right / Menu / OK button Delete ( Õ ) button LEFT / RIGHT / MENU / OK buttons activate the following. This deletes images stored on the memory card. - LEFT button : While the menu is showing, the LEFT button operates as a direction button. While the menu is not showing, press the LEFT button to select the previous image. - RIGHT button : While the menu is showing, the RIGHT button operates as a direction button. While the menu is not showing, press the RIGHT button to select the next image.
E (Effect) button : Resize Change the resolution (size) of pictures taken. Select [Start image] to save an image to be the start-up image. 1. Press the play mode button and press the E button. 2. Press the Left / Right button and select the [RESIZE] ( ) menu tab. 3. Select a desired sub menu by pressing the Up / Down button and press the OK button.
E (Effect) button : Rotating an image E (Effect) button : Colour You can rotate the stored images by various degrees. It is possible to add colour effects to your images by using this button. 1. Press the play mode button and press the E button. 2. Press the LEFT / RIGHT button and select the [ROTATE] ( ) menu tab. 3. Select a desired sub menu by pressing the Up / Down button and press the OK button. 1. Press the play mode button and press the E button. 2.
E (Effect) button : Colour Custom colour You can change the R (Red), G (Green) and B (Blue) values of the image.
Setting up the play back function using the LCD monitor PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as follows. To capture an image after setting up the play menu, press the PLAY mode button or shutter button. Menu Tab MULTI SLIDE SHOW ( ) Main Menu Sub Menu Secondary Menu Page Show Play / Repeat Play - p.
Setting up the play back function using the LCD monitor Menu Tab Main Menu Type Quality ❹ Date File Name Reset Sub Menu Secondary Menu Page Auto - Plain - Photo - FastPhoto - Auto - Draft - Normal - Fine - Auto - Off - On - Auto - Off - On - No - Yes - Ä Menus are subject to change without prior notice. 60 Starting the Multi Slide Show ( ) Images can be displayed continuously at pre-set intervals.
Starting the Multi Slide Show ( ) Selecting Images Configure Multi Slide show effects You can select image to view Unique screen effects can be used for the Multi Slide Show. 1. Use the Up / Down buttons to select the [Images] menu and press the Right button. 1. Select the [Effect] sub menu by pressing the UP / DOWN button and press the RIGHT button. MULTI SLIDE SHOW Show Images All Effect Date Interval Select Music 2. Select a desired sub menu by pressing the Up / Down button.
Starting the Multi Slide Show ( ) Playback ( à ) Setting play interval Voice memo Set the Multi Slide Show play interval. You can add your voice to a stored still image. 1. Select the [Interval] sub menu by pressing the UP / DOWN button and press the RIGHT button. 2. Use the Up / Down buttons to select the desired interval. 3. Press the OK button to save the configuration. MULTI SLIDE SHOW Show Images Effect 1 sec Interval 3 sec Music 5 sec 10 sec OK Set Back MOVIE file is displayed.
Playback ( à ) Deleting images Protecting images This deletes images stored on the memory. This is used to protect specific shots from being accidentally erased (Lock). It also unprotects images that have been previously protected (Unlock). 1. Press the Up / Down button and select the [Delete] menu tab. And then press PLAYBACK Voice Memo the Right button. Delete Select Protect All 2. Select a desired sub menu by pressing DPOF the UP / DOWN button and press the Copy to Card OK button.
Playback ( à ) DPOF(Digital Print Order Format) allows you to embed printing information on your memory card’s MISC folder. Select the pictures to be printed and how many prints to make. The DPOF indicator will display on the LCD monitor when an image that has DPOF information plays back. Images can then be printed on DPOF printers, or at an increasing number of photo labs. This function is not available for Movie clips and Voice recording files.
Playback ( à ) 2. Press the Right button again and [Index] sub menu will display. PLAYBACK Standard Index Size 1. Press the Up / Down button and select the [DPOF] menu tab. And then press the Right button. No Yes OK Set Back 3. Select a desired sub menu by pressing the UP / DOWN button. If [No] is selected : Cancel the index print setting. If [Yes] is selected : The image will be printed in index format. 4. Press the OK button to confirm the setting.
Playback ( à ) Copy To Card When this menu is selected without inserting a memory card, This enables you to copy image files, movie clips and voice recording files to the memory card. If there is not enough space available in the memory card to 1. Select the [Copy To Card] menu tab by pressing the Up / Down button. And then press the Right button. PLAYBACK Voice Memo Delete Protect DPOF Copy to Card 2.
PictBridge You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. Movie clips and voice files cannot be printed. Setting up the camera for connection to the printer 1. Connect the camera and printer with USB cable. 2. Select the [Printer] menu by pressing Up / Down button and press the OK button.
PictBridge : Picture Selection PictBridge : Print Setting You can select images you want to print. You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and File Name Print menus for printed pictures. Setting the Number of Copies to Print 1. Press the Menu button and the PictBridge menu will display. PICTBRIDGE 2. Use the Up / Down buttons to select Images One Pic Size All Pics the [Images] menu and press the Layout Type Right button. Quality 3.
PictBridge : Reset Important notes Initialises user-changed configurations. Be sure to observe the following precautions! 1. Use the Up / Down buttons to select the [Reset] menu tab. And then press the PICTBRIDGE Layout Right button. Type 2. Use the Up / Down buttons to select the Quality Date desired sub menu value, and then press File Name No Reset Yes the OK button. OK Set Back If [No] is selected : Settings will not be reset.
Important notes - This camera is not waterproof. To avoid dangerous electrical shocks, never hold or operate the camera with wet hands. - If you use this camera in wet places, such as beach or pool, do not let water or sand get inside the camera. Doing so may result in failure or may permanently damage the unit. Extremes in temperature may cause problems. - If the camera is transferred from a cold to a warm and humid environment, condensation can form on the delicate electronic circuitry.
Warning indicator There are several warnings that may appear on the LCD display. [ Card Error!] Memory card error $ Turn off the camera power and turn it on again $ Insert the memory card again $ Insert and format the memory card (p.46) [ Card Locked! ] The memory card is locked $ SD/SDHC memory card : Slide the write protect switch to the top of the memory card [ File Error! ] File error $ Delete the file. Memory card error $ Contact a camera service centre.
Before contacting a service centre Please check the following The camera doesn’t switch on There is low battery capacity $ Insert fresh batteries. (p.12) Battery is inserted incorrectly with the polarities reversed. $ Insert the battery according to the polarity marks (+, -). The camera power ceases while in use The battery is exhausted $ Insert fresh batteries. The Camera is turned off automatically $ Turn on the camera power again.
Before contacting a service centre The flash does not fire Flash off mode has been selected $ Dis-engage flash off mode The camera mode can't use the flash $ Refer to the FLASH instruction (p.
Specifications Image Sensor - Type : 1/2.33" CCD - Effective Pixel : Approx. 10.2 Mega-pixel - Total Pixel : Approx. 10.3 Mega-pixel Lens - Focal Length : SHD Lens f = 6.3 ~ 31.5mm (35mm film equivalent : 38 ~ 190mm) - F No. : F2.8 ~ F4.6 - Digital Zoom : ·Still Image mode :1.0X ~ 5.0X ·Play mode : 1.0X ~ 12.0X (depends on image size) LCD Monitor - 2.
Specifications - Movie Clip ·With Audio (recording time : memory capacity dependent) ·Size : 640x480, 320x240 ·Frame rate : 30 fps, 15 fps ·5X Optical Zoom and Mute in Zooming ·Movie Editing (Embedded): Pause during recording, Still Image Capture Storage - Media ·Internal memory : About 17MB flash memory ·External Memory (Optional) : MMC card (Up to 2GB guaranteed) SD card (Up to 4GB guaranteed) SDHC card (Up to 4GB guaranteed) - File Format ·Still Image : JPEG (DCF), EXIF 2.2, DPOF 1.1, PictBridge 1.
Specifications Dimensions (WxHxD) - 98.8 X 63 X 25.6mm (excluding protrusions) Weight - Approx. 160g (without batteries and card) Operating Temperature - 0 ~ 40°C Operating Humidity - 5 ~ 85% Software - Samsung Master, Adobe Reader Specifications are subject to change without prior notice. All trademarks are the property of their respective owners.
Software Notes Please ensure that you read the instruction manual carefully before use. - Under no circumstances should all or part of either the software or the user manual be reproduced. - Copyrights for software are licensed only for use with a camera. - In the unlikely event of a manufacturing fault, we will repair or exchange your camera. We cannot, however, be held responsible in any way for damage caused by inappropriate use.
About the software After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following window should automatically run. Samsung Master : This is the all-in-one multi media software solution. You can download, view, edit and save your digital images and movie clips with this software. This software is only compatible with Windows. 78 You should allow 5 ~ 10 seconds for running the automatic setup program according to the capability of your computer.
Setting up the application software To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. 2. Install DirectX, Samsung Master and Adobe Reader by selecting a button shown on the monitor. If a recent version of DirectX has been installed on your computer, DirectX may not be installed. You can visit the Samsung web-site through the internet. http://www.samsung.
Setting up the application software 3. After restarting the computer, connect the PC to the camera with the USB cable. 4. Turn the camera power on. The [Found New Hardware Wizard] will open and the computer will recognise the camera. Ä If your OS is Windows XP / Vista, an image viewer program will open.
Setting up the application software PDF documents of user manual are included in the Software CD-ROM supplied with this camera. Search the PDF files with Windows explorer. Before opening the PDF files, you must install the Adobe Reader included in the Software CD-ROM. To install the Adobe Reader 6.0.1 correctly, Internet Explorer 5.01 or later has to be installed. Visit "www.microsoft.com" and upgrade the Internet Explorer.
Starting PC mode Connecting the camera to a PC Downloading stored images You can download the still images stored on the camera to your PC's hard disk and print them or use a photo editing software to edit them. 1. Connect the camera to your PC with the USB cable. 2. On your computer's desktop display, select [My computer] and double click [Removable Disk $ DCIM$ 100SSCAM]. The image files will then be displayed.
Starting PC mode 4. A pop-up menu will open. Click the [Cut] or [Copy] menu. - [Cut] : cuts a selected file. - [Copy] : copies files. - By using [Samsung Master], you can see the stored images in the memory directly on the PC monitor and you can copy or move the image files. We recommend that you should copy the images to the PC to 5. Click a folder where you want to paste the file. view them. Opening images directly from the removable disk may be subject to unexpected disconnection.
Removing the removable disk Windows 2000/XP/Vista (The illustrations may differ from those shown depending on the Windows O/S.) 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, please wait until the lamp has finished blinking and is constantly on. 5. A [Safe to Remove Hardware] window will open. Click the [OK] button. 6. A [Unplug or Eject Hardware] window will open. Click the [Close] button and the removable disk will be removed safely. 2.
Samsung Master You can download, view, edit and save your images and movies with this software. This software is only compatible with Windows. To start the program, click [Start $ Programs $Samsung $ Samsung Master]. Downloading images 1. Connect the camera to your PC. 2. A window for downloading images will be displayed after connecting the camera to your PC. - To download the captured images, select the [Select All] button. - Select desired folder in the window and click the [Select All] button.
Samsung Master Image viewer : You can view the stored images. - Image viewer functions are listed below. Ì Menu bar : You can select menus. File, Edit, View, Tools, Change functions, Auto download, help, etc. Í Image selection window : You can select the desired images in this window. 7 Media type selection menu : You can select image viewer, image edit and movie edit functions in this menu. 8 Preview window : You can preview an image or a movie clip and check the multi media information.
Samsung Master Movie edit : You can get the still image, movie clip, narration, music files together in a movie clip. Ä Some movie clips that were compressed with a codec that is not compatible with the Samsung Master can’t play back in the Samsung Master. Ä Refer to the [Help] menu in Samsung Master for further information. - Movie clip edit functions are listed below. Ì Edit menu : You can select the following menus. [Add Media] : You can add other media elements to a movie.
Setting up the USB Driver for MAC Using the USB Driver for MAC 1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver. 2. Check the MAC OS version during start-up. This camera is compatible with MAC OS 10.3. 3. Connect the camera to the Macintosh and turn the camera power on. 4. A new icon will be displayed on the desktop after connecting the camera to the MAC. 1. Double click a new icon on the desktop and the folder in the memory will be displayed. 2.
FAQ Please check the following if the USB connection malfunctions. Case 1 USB cable is not connected or it is not the supplied USB cable. $ Connect the supplied USB cable. Case 2 The camera is not recognised by your PC. Sometimes, the camera may appear under [Unknown Devices] in Device Manager. $ Turn off the camera, remove the USB cable, plug in the USB cable again, and then turn on the camera. Case 3 There is an unexpected error during file transfer. $ Turn the camera power off and on again.
FAQ When the DirectX 9.0c or later is not installed $ Install the DirectX 9.0c or later 1) Insert the CD provided with the camera 2) Run the windows explorer and select the [CD-ROM drive:\ DirectX] folder and click the DXSETUP.exe file. The DirectX will be installed. Visit the following site for downloading the DirectX.http://www.microsoft.com/directx If a PC connected with the camera stops responding while Windows is starting. $ In this case, disconnect the PC and the camera and Windows will start.
FCC notice NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
MEMO 92
