Quick Guide

English14
Installation
Installation
A
1⁄"
4. While holding the custom panel, attach
it to the door and insert the custom
panel xers (A) into the corresponding
holes at the top of the door as shown.
5. Push the custom panel downward to x.
CAUTION
Do not let the custom panel extend more
than 1⁄" from the top of the dishwasher.
6. Adjust the spring level while the door
is approximately opened at 30 degrees.
The door should hold its position, and
should not fall open.
CAUTION
• Do not adjust the spring level while the
door is completely opened.
• If the custom panel weighs more than
15.5 lbs (7 kg), the door may fall open.
Custom panels weighing more than
15.5 lbs (7 kg) are not recommended.
DW60R2014(A5)_IM_DD81-02707A-01_EN.indd 14 2021-03-09  3:43:02