SAMSUNG DVM-Pro 2008 User Guide SAMSUNG DVM-Pro 2008 User’s Manual (Sales mode) English Version 2008 . 02 .
SAMSUNG DVM-Pro 2008 User Guide Contents 1. User’s manual for Sales mode of DVM Pro 1-1. Architecture of sales mode 2. Top Down menu 2-1. File 2-2. View 2-3. Setup 2-4. Help 3. Project 3-1. Project Information 3-1-1. Project name 3-1-2. Country 3-1-3. Customer Information 3-1-4. Designer Information 3-2. Setup Space 3-3. Workspace management 4. Indoor unit 4-1. Workspace 4-2. Add Indoor 4-3. Edit Indoor 4-4. Delete Indoor 4-5. View Indoor 4-6. Setup options 5. Outdoor unit 5-1. Workspace 5-2.
SAMSUNG DVM-Pro 2008 User Guide 6-1. Workspace 6-2. Piping 6-2-1. Select Indoor 6-2-2. Select Piping connection tools 6-2-3. Basic Pipe, Standard Pipe, Manual Pipe 6-2-4. Draw Piping manually 6-2-5. View Diagram 6-2-6. Check System 7. Wiring 8. Control System 9. Report 9-1. Insert Logo 9-2. Reporting Information 9-3. Workspace to include in Report 9-4. Currency 9-4.
SAMSUNG DVM-Pro 2008 User Guide 1. User’s manual for Sales mode of DVM Pro 1-1. Architecture of sales mode -. The sales mode of DVM Pro is an application software to help business of System A/C. It’s configured with Project, Indoor, Outdoor, Piping, Wiring, Control System and Report. And can’t move to next step if no completion of current step because these works would be executed, step by step. 2.
SAMSUNG DVM-Pro 2008 User Guide -.
SAMSUNG DVM-Pro 2008 User Guide -. Languages 2-4. Help : Show the version information of DVM program and user can move to the related web page directly.
SAMSUNG DVM-Pro 2008 User Guide 3. Project : Set Project registration and Workspace. 3-1. Project Information : . User can register the project when start new project. User must fill out all blanks of project registration fields if new project. . Show the related information if it’s current project. 3-1-1. Project name : Enter project name to be registered. 3-1-2. Country : Select country. 3-1-3. Customer information : Enter customer information. 3-1-4. Designer information : Enter designer name. 3-2.
SAMSUNG DVM-Pro 2008 User Guide Bldg Area Floor Area -. Setup building a. Add Building : add the building. -. New building is added if enter building code and name after press [add building]. * Can’t duplicate the code name and the code are configured with alphabet and Arabic. b. Make Floor : Form the floor per each building. -. Select the building to make floor. -. Enter the number of floor for Basement and Ground. -.
SAMSUNG DVM-Pro 2008 User Guide c. Add / delete floor : Can create or delete additional floor after make the floor. . -. New floor is added if enter building code and name after press [add floor]. * Can’t duplicate the code name and the code are configured with alphabet and Arabic. d. Edit Floor height : Edit current floor height. -. Edit the floor height after select the relevant position of floor under title of floor height. -.
SAMSUNG DVM-Pro 2008 User Guide 4. Indoor unit : User can select, add and delete Indoor unit. And can select option per each Indoor unit. 4-1 Workspace : It shows the detailed information about workspace that displays, and can change, and using workspace that is using present in workspace selection window. 4-2. Add Indoor : Can add Indoor unit that wish to use. a. Indoor unit : Select name, type, Model Name.
SAMSUNG DVM-Pro 2008 User Guide after press [edit] button. 4-5. [View Indoor unit] window : It shows Indoor to be used. -. Display Indoor unit name, Model Name, cooling temperature, cooling capacity, Cooling (kW), heating temperature, heating capacity, heating (kW), Indoor unit type, floor, K2 and etc. -. After do [add Indoor unit], it shows the yellow indication in front of the relevant Indoor unit in case of it's selected manually by Indoor unit correction. -.
SAMSUNG DVM-Pro 2008 User Guide 5. Outdoor unit 5-1. Workspace : It shows the detailed information about workspace that displays, and can change, and using workspace that is using present in workspace selection window. -. Choose workspace that wish to work. 5-2. Add Outdoor : Add Outdoor unit to connect the unconnected Indoor unit with Outdoor unit. -. Press confirmation after input the name, combination rate, floor, cooling temperature and heating temperature after press [add].
SAMSUNG DVM-Pro 2008 User Guide -. When add Outdoor unit, Outdoor unit of smallest capacity is added by workspace base. The capacity fluctuates automatically according to modification of the connected Indoor unit. -. Connect Indoor unit that adds to Outdoor unit in existing, or unconnects after add Outdoor unit pressing [add] button in case of there is the unconnected Outdoor unit.
SAMSUNG DVM-Pro 2008 User Guide -. If there is “ ” ICON In front of Outdoor unit ”, user must add more Indoor than combination rate. -. How to do if ondoor unit were connected with more Indoors than the combination rate ? . Add Outdoor unit. . Move Indoor unit toward Outdoor which was added. . User must adjust the combination rate. 5-3. Edit Outdoor -. Edit outdoor after press "Edit" button after select Outdoor unit to be edited if need to edit Outdoor unit.
SAMSUNG DVM-Pro 2008 User Guide 5-4. Delete Outdoor unit -. When delete Outdoor unit, it shows message that "do you want to delete the selected “Outdoor xx?" if press “delete” button after select Outdoor unit to delete. It would be deleted if presses “yes”. Now Indoor units had connected with the deleted Outdoor unit would be moved to “unconnected Indoor unit” window on right-side lower column. 5-5. Copy Indoor -.
SAMSUNG DVM-Pro 2008 User Guide 5-6. Compensate Outdoor -. Outdoor Compensation can operate after refrigerant piping is linked, and it's not activated in case of there is more than combination rate. -. Select Outdoor unit to need [Compensate Outdoor]. -. Press '[Compensate Outdoor] button. -. Select the area to need [compensation option] among compensation and heating compensation selects necessary segment. -. Choose installation position of Indoor unit and Outdoor unit. -.
SAMSUNG DVM-Pro 2008 User Guide 5-7. Window of Outdoor Information -. The detailed information regarding Outdoor unit and Indoor unit on the right-end screen is seen automatically. Impossible to edit the detailed information.
SAMSUNG DVM-Pro 2008 User Guide 5-8. Indoor units not yet attached -. In case of there is unconnected Indoor unit, piping connection mode is not activated. -. Delete it by delete command after select no needful indoor among unconnected Indoor unit 6. Piping 6-1. Workspace : It shows the details information about workspace that displays and can change, and uses workspace that is using present in workspace selection window. -. Choose workspace that wish to work. 6-2. Piping 6-2-1.
SAMSUNG DVM-Pro 2008 User Guide 6-2-4. Draw Manual Pipe : User can edit the Piping at free. -. If check manual Pipe], piping connection tool is activated. -. Remove Net : It shows [Remove Net] if press a right mouse on the Ref Joint that is blue triangle part of piping system diagram or on the Indoor unit. If select [Remove Net], the pipe at lower of the selected Ref Joint will be disappeared and next Indoor of Ref Joint will be moved to No-linked Indoor. -.
SAMSUNG DVM-Pro 2008 User Guide -. After [Remove Net] -. If remove net, square empty box appears and inserts the connection tool in the box and can connect user free piping. -. After insert piping connection tool -. It's inserted if put in empty quadrilateral attracting Indoor unit that unconnect after link the connection tool. -.
SAMSUNG DVM-Pro 2008 User Guide 6-2-5. Viewing Diagram -. Full size : View the diagram on a large scale. -. Vertical : View the vertical diagram after check [vertical]. 6-2-6. Input Pipe length [Input Pipe length] shows if presses a right mouse on Ref Joint that is blue triangle part of piping system diagram or Indoor unit. can input length of each piping, and give an effect to [check system] if the length is inputted. 6-2-7.
SAMSUNG DVM-Pro 2008 User Guide -. If didn't set piping length at free, enter the piping length with clicking Apply piping length, "Do you apply the piping length of all visible units?" If window that will apply together comes out, press “yes”. -. Press [Yes] after enter piping length to apply. -. Press beginning button. In case of there is no issue, it shows [Check system] completion message. and an addition refrigerant quantity appears in window of [Check system].
SAMSUNG DVM-Pro 2008 User Guide -. If press close button, all inspections are expressed blue to piping system diagram, and it means that it's no issue to show blue color. -. If there is any issue while checking the system, it shows error message. if confirm the system piping diagram, pipe that problem happens was expressed in red color..
SAMSUNG DVM-Pro 2008 User Guide 7. Wiring : Show electricity wiring state of indoor & outdoor units. 7-1. Workspace : It shows details information about workspace that displays and can change, and uses workspace that is using present in window of workspace selection.. -. Choose workspace that wish to work.
SAMSUNG DVM-Pro 2008 User Guide 7-2. Select Outdoor unit : Can select wiring schematic diagram of Outdoor unit wanting in the same workspace. 8. Control system : Form control system. -. Press addition button, and input a name. -. Include Outdoor units to add in control using middle transfer button. * It's excepted in control if it’s checked in K2 options among Indoor unit. -. Press [Setup system]. -. Continue the decided steps after selects control system, and presses confirmation.
SAMSUNG DVM-Pro 2008 User Guide -. If is ended, control diagram appears on screen. 9.
SAMSUNG DVM-Pro 2008 User Guide 9-1. Insert Logo : Store image file of logo to be used in report. 9-2. Report contents : equipment list, Indoor unit specification, Outdoor unit specification, piping, wiring diagram and estimates. and displays or prints ONLY the checked report. 9-3. Workspace to include to report : when print out report, can choose workspace Outdoor unit etc. that wish to display to user at free. 9-4. Currency : Can choose currency. 9-5.
