00369A DVD-V4700/XAC-ENG 1/9/04 4:29 PM Page i Instruction Manual Mode d’emploi DVD-V4700 www.samsung.
DVD-V4700/XAC-ENG 12/8/03 4:38 PM Page 1 Remote Control Overview
00369A DVD-V4700/XAC-ENG 12/17/03 9:30 AM Page 2 Safety Instructions Table of Contents This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of fire or electric shock to persons. Safety Audio Language . . . . . . . . . . . . . . . . . . . . . . . 16 RISK OF ELECTRIC SHOCK DO NOT OPEN Important Safety Instructions . . . . . . . . . . . . .
00369A DVD-V4700/XAC-ENG 2/9/04 4:43 PM Page 4 Feature Summary Disc Type and Characteristics DVD+VCR Features Disc Markings • Perfect compatibility to play back DVDs, audio CDs MP3, WMA discs, VCD, SVCD, JPEG FILES CDs, or VHS Tapes. • Enjoy a DVD movie while recording a TV show to the VCR. • Auto Setup instantly finds the time and runs channel search. • RF inputs and outputs for all kinds of TVs available. • Composite, S-Video, and Component Video outputs.
00369A DVD-V4700/XAC-ENG 1/9/04 4:30 PM Page 6 Front Panel Overview Front Panel Display 1 2 3 4 1 2 Basic Connections/Auto Setup You will need to connect the DVD-VCR to a TV and run Auto Setup. The Auto Setup will automatically search for channels and then set your DVD-VCR's internal clock. 3 NOTES: • See Appendix A for Advanced Connections.
DVD-V4700/XAC-ENG 12/8/03 4:38 PM Page 8 S-Video/Component Video Connections (for DVD) Basic Connections/Auto Setup Use the S-Video or Component Video connection method only for the DVD player. The tuner and VCR can still be viewed through the RF or line inputs. To activate your alternative (S-Video or Component) video selection, follow the “Alt Video Out” instructions on page 20. Keep in mind that you can choose either S-Video or Component only, but not both.
DVD-V4700/XAC-ENG 12/8/03 4:38 PM Page 10 A/V Receiver Connections To take full advantage of the movie theater experience that DVD offers, you may want to connect your DVDVCR to a complete Surround Sound system, including an A/V Receiver and six Surround Sound speakers. Before You Begin... • If your A/V receiver is equipped with a Dolby Digital Decoder, you have the option to bypass the DVD-VCR’s built-in Dolby Digital Decoder. Use the Digital Audio Out connection below.
DVD-V4700/XAC-ENG 12/8/03 4:38 PM Page 12 Menu Language To change the on-screen MENU language to English, French or Spanish, follow these steps. 1 Open “MENU” Press the MENU button while the DVD is in Stop or Play mode. 2 Select “SETUP” Using the UP/DOWN buttons, move the selection bar to “SETUP” then press ENTER to select.
DVD-V4700/XAC-ENG 12/8/03 4:38 PM Page 14 Auto Channel Memory Auto Channel Memory will automatically seek and store all active channels in your area. 1 Open “MENU” With the DVD in Stop or Play mode, press the MENU button. 2 Select “SETUP” Using the UP/DOWN buttons, move the selection bar to “SETUP” then press ENTER to select. 3 Select “Channel” Using the UP/DOWN buttons, move the selection bar to “Channel”, then press ENTER to select.
DVD-V4700/XAC-ENG 12/8/03 4:38 PM Page 16 Disc Menu Language Audio Language Subtitle Language To set the Disc Menu Language to your preferred language, follow these steps. If your preferred language is available on a DVD, your Disc Menu Language will automatically be set to the language you choose. To set the Audio Language to your preferred language, follow these steps. If your preferred language is available on a DVD, your Audio Language will automatically be set to the language you choose.
DVD-V4700/XAC-ENG 12/8/03 4:38 PM Page 18 DTS Dynamic Compression If your A/V receiver is equipped with a DTS decoder, your DVD-VCR can output DTS digital sound, but you MUST enable this feature in the menu system. NOTE: Select “On” ONLY if you have connected a DTS-equipped A/V receiver to the Digital audio Out (coaxial) on the DVD-VCR rear panel. PCM Down Sampling Dynamic Compression restrains the dynamic range of sounds, i.e. the difference between the loud and quiet passages of a DVD audio track.
DVD-V4700/XAC-ENG 12/8/03 4:38 PM Page 20 Alt Video Out Black Level 1 Open “MENU” Press the MENU button while the DVD is in Stop mode. The Black Level feature adjusts the reference level of black in the video signal to one of two choices: • Off - Standard NTSC black level. Yields consistent contrast through all sources. • On - Enhanced black level, for increased contrast during DVD playback. 1 Open “MENU” Press the MENU button while the DVD is in Stop mode.
DVD-V4700/XAC-ENG 12/8/03 4:38 PM Page 22 Special Playback Features During DVD/CD playback you can select from the following special playback options. To resume normal playback, press the ❿ll (PLAY/PAUSE) button. 1 PAUSE Press the ❿ll (PLAY/PAUSE) button on the remote control during playback. • The picture will pause and the audio will mute. • To resume playback, press the ❿ll (PLAY/PAUSE) button. • If the player is left in Pause mode for 5 minutes, it will stop automatically.
DVD-V4700/XAC-ENG 12/8/03 4:38 PM Page 24 Title/Chapter/Time Selection To view the current Title, Chapter/Track, and counter position, press the INFO. button during DVD playback. The Information screen can also be used to quickly choose a title, chapter/track, or playing time. Subtitle Angle View ➢ To make the screen disappear, press the INFO button again. Title 1 View the Display During DVD/CD playback, press the INFO. button on the remote control.
DVD-V4700/XAC-ENG 12/8/03 4:38 PM Page 26 A to B Repeat A to B Repeat feature enables you to repeat the designated section on a DVD or CD. To activate, mark where to start(A) and where to end(B) of the section you want to watch. 1 Select A-B Repeat Function Press the REPEAT button while in Play mode, then use the Left/Right buttons to select A-B Repeat. • When you select A-B Repeat, “A-” will be highlighted. NOTE: The menu will display “Track” in place of “Chapter” if you are playing a CD.
DVD-V4700/XAC-ENG 12/8/03 4:38 PM Page 28 Special VCR Playback Features Function (DVD) Use this feature to check your DVD. 1 Open “MENU” With the DVD in Play mode, press the MENU button. 2 Select “FUNCTION” Use the UP/DOWN buttons to highlight “FUNCTION” then press the ENTER button. 3 Select “DVD Function” Using the UP/DOWN buttons to highlight “DVD Function” then press ENTER to select. 4 Select “Title Menu” Highlight “Title Menu”, then press the ENTER button.
DVD-V4700/XAC-ENG 12/8/03 4:38 PM Page 30 Variable Search System 5 Select “Auto Repeat” Move the selection bar to “ Auto Repeat”. It sets the VCR to play a tape repeatedly [unless a tape control is activated (stop, fast forward or rewind)]. n Off On Press the SEARCH button to display the search screen in the stop mode. When a program is recorded, the starting point is given an Index mark for easy location. However, the VHS Index Search System (VISS) cannot recognize index marks made by old VCRs.
DVD-V4700/XAC-ENG 12/8/03 4:38 PM Page 32 One-Touch Recording (OTR) Record Speed How to Set a Timer Recording One-Touch Recording (OTR) allows you to add recording time in 30-minute increments up to 4 hours at the touch of a button. You can slow down the recording speed from SP to SLP in order to fit six hours of programming on a T-120 tape. 4 Set “Time/Date/Speed” Repeat Step 3 above to set start time, end time, date and record speed. Date can be set for one time, daily or weekly recording.
00369A DVD-V4700/XAC-ENG 12/9/03 9:18 AM Page 34 Technical Specifications ELECTRONICS AUDIO 2 Stereo audio inputs, RCA Connector, -8dbm, 47KΩ, front and rear Inputs VIDEO 2 Composite video inputs, RCA Connector, 75Ω, 1Vp-p RF Antenna or CATV Input, F-Connector, 75Ω AUDIO 1 Stereo audio outputs, RCA Connector, -8dbm, 1.5KΩ AUDIO (DVD only) 2 Digital audio output (1 coaxial, 1 Optical) Samsung Limited Warranty Samsung Electronics Canada Inc.
00369A DVD-V4700/XAC-ENG 2/9/04 4:44 PM Page 36 SAMSUNG ELECTRONICS CANADA, INC. HEADQUARTERS SAMSUNG ELECTRONICS CANADA, INC. 7037 FINANCIAL DRIVE MISSISSAUGA, ONTARIO L5N 6R3 CANADA MADE IN KOREA TEL: 1-905-542-3535 www.samsung.
