User manual
42 - English
Recording
You may control a Digital Camcorder using the IEEE1394
(DV) interface.
Check that the disc has enough available space for the
recording. Adjust the record mode. See page 26 to see how
to connect the camcorder to your DVD recorder.
1
Press the OPEN/CLOSE button, and place a
recordable disc on the disc tray.
2
Press the OPEN/CLOSE button to close the disc tray.
Wait until “LOAD” disappears from the front panel display.
3
Press the REC MODE button repeatedly to select
the recording speed(quality).
➞
SP
➞
LP
➞
EP
➞
XP
4
Press the INPUT SEL. button to select DV.
If the input is set to DV, a playback/record menu that
enables Digital camcorder control appears on the top
of the screen.
5
Select the PLAY ( ) icon on the upper part of the
screen to playback the camcorder and find the
starting position to copy.
6
To start recording, select REC( ) icon in the top side
of the screen using the
œ√
buttons, then press the
ENTER button.
To stop recording
Press the STOP ( ) button to stop or finish
recording in progress.
•
When using DVD-RAM/DVD
-
RW/ DVD
-
R discs,
the message ‘Updating the information of disc.
Please wait for a moment’ is displayed
.
■
You can not change the record mode and
input source while recording.
■
Recording will stop automatically if there is
no free space left for recording.
■
Up to 99 titles can be recorded onto a
DVD-RAM/-RW/-R disc.
■
DVD-RAM/DVD
-
RW discs must be
formatted before starting to record. Most
new discs are sold unformatted.
■
Do not use DVD-R authoring discs with
this unit.
■
To access on-screen controls during
recording, press the
œ
or
√
buttons.
■
When copying from a camcorder and the
end of the tape is reached (no Video), the
screen may turn blue or purple.
NOTE
●
Record Mode XP (01:11)
SELECTMOVE RETURN
DV
The DV device is connected
Copying from a Camcorder
Before you start
√