User manual

English - 41
Recording
To pause recording
Press the PLAY/PAUSE ( ) button to pause
recording in progress.
Press the PLAY/PAUSE ( ) button again to resume
recording.
To stop recording
Press the STOP ( ) button to stop or finish
recording in progress.
• When using DVD-RAM/DVD - RW/DVD - R discs, the
message ‘Updating the information of disc. Please
wait for a moment.’ is displayed.
■
You can not change the recording mode
and input source during recording.
■
Recording will stop automatically if there is
no free space left for recording.
■
Up to 99 titles can be recorded onto a
DVD-RAM/-RW/-R disc.
■
Recording will stop automatically if a copy
protected image is selected.
■
If you are using a Cable Box(no antenna),
you cannot watch a different cable TV
program from the one you're recording.
■
DVD-RAM/DVD -
RW discs must be
formatted before starting to record. Most
new discs are sold unformatted.
■
Do not use DVD-R authoring discs with
this unit.
NOTE
Check that the disc has enough available space for the
recording. Adjust the record mode.
1
Press the OPEN/CLOSE button, and place a
recordable disc on the disc tray.
2
Press the OPEN/CLOSE button to close the disc tray.
Wait until “LOAD” disappears from the front panel
display.
3
Press the INPUT SEL. button to select the input
source according to the connection you made.
The front panel display changes in the following
sequence:
➞ Channel Number ➞ AV1 ➞ AV2 ➞ DV
4
Press the REC MODE button repeatedly to select the
recording speed(quality).
➞ SP ➞ LP ➞ EP ➞ XP
5
Press the REC button.
Before you start
Record Mode XP (01:11)
Recording : AV1
Recording from External
Equipment