User manual

This menu is used to set the current time. You must set
the time first to use timer recording.
You must have the antenna/cable connected to
set the Auto Clock. See pages 16-18 for Antenna
connections.
30 - English
System Setup
Quick Recording Setting
It takes about 10 seconds for a disc to load (initialize)
every time you turn on the unit. To bypass this
initialization process, you can set the Quick Recording
feature to On. This enables you to record immediately
without having to wait for the disc to load.
1
With a disc inserted and the unit in Stop mode, press
the MENU button on the remote control
2
Select Setup using the …† buttons, then press the
ENTER or
√ button.
You can't use the Setup functions while playing a disc.
3
Select System using the …† buttons, then press the
ENTER or
√ button.
System menu will be displayed.
4
Select Quick Recording using the …† buttons, then
press the ENTER or
√ button.
Quick Recording menu will be displayed.
5
Select On using the …† buttons, then press the
ENTER or
√ button.
System
DVD-Recorder
Title List
Playlist
Disc Manager
Timer Rec.
Setup
CM Skip Time : 15 Sec
√√
EP Mode Time : 6 Hours
√√
Chapter Creator : Off
√√
Quick Recording : Off
√√
■
The Quick Recording is set to Off as
default.
NOTE
DVD-RW(VR)
RETURNENTERMOVE
EXIT
Clock Set
1
With the unit in Stop mode/No Disc mode, press the
MENU button.
2
Select Setup using the …† buttons, then press the
ENTER or √ button.
3
Select Clock Set using the …† buttons, then press
the ENTER or √ button.
Clock Set menu will be displayed.
4
Select Auto Clock Set using the …† buttons, then
press the ENTER or √ button.
5
Select the sub menu(Clock Data CH, Time Zone
or Daylight Saving) using the
…† buttons, then
press the ENTER or √ button.
Auto Clock Set
Clock Set
DVD-Recorder
No Disc
Timer Rec.
Setup
Auto Clock Set
√√
Manual Clock Set
√√
RETURNENTERMOVE EXIT
Auto Clock Set
DVD-Recorder
No Disc
Timer Rec.
Setup
Clock Data CH : Automatic
√√
Time Zone : Automatic
√√
Daylight Saving : Automatic
√√
RETURNENTERMOVE EXIT