Upgrade guide

1) Press OPEN/CLOSE to open the disc tray.
2) Insert the update CD-R disc with the software update, label facing up.
3) Press OPEN/CLOSE to close the disc tray.
※
It takes about 1~2 minutes before the mesage below appears.
※
If you don't see the message above, try another disc.
Generally, this is caused by disc quality and by disc creating problem.
4) Press the ENTER button on the remote control in order to update your unit.
5) It takes about 1~2 minutes to complete the update.
6) In order to update a drive firmware, the message below will be displayed on the screen after flash
update. ( if the message isn't displayed, please try it once more from 1'st step.)
7) Press the ENTER button on the remote control.
8) After removing the update disc, turn off the unit with power button.
And after closing a try with power button, the update is complete
After checking old and new version, select "Yes" or "No"
with "
◀
"or"
▶
" on the remote control.
※
The Version is indicated by "XX.X.ModelName"
Flash Update
Do you want to update F lash-firmware?
Version: XX.X.XXXXX -> XX.X.XXXXX
Yes
No
【
Remote Control
】
2
No
Drive Update
Do you want to update Drive-firmware?
Version: XX.X.XXXXX -> XX.X.XXXXX
Yes No