Upgrade guide

Write the downloaded file onto a blank CD-R or CD-RW disc, using the following settings:

1) Download the software update files from the Samsung Internet Site.

( GLOBAL DOWNLOAD CENTER at www.samsung.com )

2) Write 2 files to 1 disc using the CD-RW of your computer.

-Notice-

Please check your correct model name at near label rating before downloading the firmware.

( Ex. DVD-R120/ XAA, DVD-R120/ XET etc...)

■

Recommended Application Program

●

Nero Burning / Easy CD Creator ..etc

■

Option

●

Multisession ; No Multisession

●

Character set ; ISO9660 or Joliet Format

●

Finalize & Disc at once

NOTE

It is very important ; Please read the below notice below before updating your unit.

The following events may interrupt the update process and MAY RESULT IN PERMANENT

DAMAGE TO THE UNIT WHILE UPDATING.

Ⅰ

. Unplugging the power cord.

Ⅱ

. Power Outage.

Ⅲ

. Dirt or Scratches on the disc.

Ⅳ

. Opening a disc tray during processing.

How to make an update disc

Update procedure

Firmware Update of a DVD-R120

WARNING

Check Point

PAGE 1
Firmware Update of a DVD-R120 How to make an update disc Write the downloaded file onto a blank CD-R or CD-RW disc, using the following settings: 1) Download the software update files from the Samsung Internet Site. ( GLOBAL DOWNLOAD CENTER at www.samsung.com ) 2) Write 2 files to 1 disc using the CD-RW of your computer. - Notice Please check your correct model name at near label rating before downloading the firmware. ( Ex. DVD-R120/ XAA, DVD-R120/ XET etc...
PAGE 2
1) Press OPEN/CLOSE to open the disc tray. 2) Insert the update CD-R disc with the software update, label facing up. 3) Press OPEN/CLOSE to close the disc tray. ※ It takes about 1~2 minutes before the mesage below appears. Flash Update Do you want to update Flash-firmware? Version: XX.X.XXXXX -> XX.X.XXXXX Yes No No 【 Remote Control 】 After checking old and new version, select "Yes" or "No" with "◀" or "▶" on the remote control. ※ The Version is indicated by "XX.X.