DVD-P191K DVD Player user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.
precautions 1. Setting up - Refer to the identification label located on the rear of your player for its proper operating voltage. - Install your player in a cabinet with adequate ventilation holes. (7~10cm) Do not block ventilation holes on any of the components for air circulation. - Do not push the disc tray in by hand. - Do not stack components. occurs, leave the player at room temperature until the inside of the player becomes dry and operational. 4.
before you start table of contents Accessories Check for the supplied accessories below Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Setup General Features . . . . . . . . . . . . . . . . . . . . . . . . . .4 Disc Type and Characteristics . . . . . . . . . . . . . . . .5 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Tour of the Remote Control . . . . . . . . . . . . . . . . .
setup General Features Excellent Sound Dolby Digital, a technology developed by Dolby Laboratories, provides crystal clear sound reproduction. Screen Both regular and widescreen(16:9) pictures can be viewed. Slow Motion An important scene can be viewed in slow motion. Parental Control (DVD) The parental control allows users to set the level necessary to prohibit children from viewing harmful movies such as those with violence, adult subject matter, etc.
Disc Type and Characteristics This DVD player is capable of playing the following types of discs with the corresponding logos: Disc Types (Logos) Recording Types Audio + Video VIDEO-CD Audio + Video AUDIO-CD Max. Playing Time Characteristics 12 Cm Single-sided 240 min. Double-sided 480 min. - DVD contains excellent sound and video due to Dolby Digital and MPEG2 system. 8 Cm Single-sided 80 min. Double-sided 160 min.
setup Description Front Panel Controls 2 3 4 5 6 1 1. 2. 3. POWER ON/OFF ( ) Turn on/off and the player is turned on/off. DISC TRAY Place the disc here. 4. DISPLAY Operation indicators are displayed here. 5. OPEN/CLOSE ( )/STOP ( ) Press to open and close the disc tray / stops disc play. MIC Connect Microphone for karaoke functions. 6. PLAY/PAUSE ( ) Begin or pause disc play. Front Panel Display Total playing time/Displays various messages concerning operations such as PLAY, STOP, LOAD ...
Rear Panel 4 ● SETUP 1 2 3 1. AUDIO OUT JACKS - Connect to the Audio input jacks of your television or audio/video receiver. 2. VIDEO OUT JACK - Use a video cable to connect to the Video input jack on your television. 3. COMPONENT VIDEO OUT JACKS - Use these jacks if you have a TV with Component Video in jacks. These jacks provide PR, PB and Y video. - If P-SCAN Video Output is selected in Setup Menu, progressive scan mode will work.
setup Tour of the Remote Control 1 2 3 4 5 11 12 13 14 15 16 6 7 17 18 8 9 10 1. DVD POWER Button Turns the power on or off. 2. REPEAT Button Allows you to repeat play a title, chapter, track, or disc. 3. DISC MENU Button Brings up the Disc menu. 4. BOOKMARK Quickly find bookmark sections of a DVD. 5. 6. STOP Button ( ) ) SKIP Buttons ( / Use to skip the title, chapter or track MENU Button Brings up the DVD player’s menu. 7. 8. ENTER/π/†,√/® Buttons This button functions as a toggle switch.
connections Choosing a Connection The following shows examples of connections commonly used to connect the DVD player with a TV and other components. - Refer to the user’s manual of the additional components you are connecting for more information on those particular components. Connection to a TV (For Video) 1 Using video/audio cables, connect the VIDEO (yellow)/ AUDIO (red and white) OUT terminals on the rear of the DVD player to the VIDEO (yellow)/AUDIO (red and white) IN terminals of TV.
connections Connection to a TV (Interlace) - Connecting to your TV using Component video cables. - You will enjoy high quality and accurate color reproduction images. Component video separates the picture element into black and white(Y), blue(PB), red(PR) signals to present clear and clean images. (Audio signals are delivered through the audio output.) 1 Using component video cables, connect the COMPONENT VIDEO OUT terminal on the rear of the DVD player to the COMPONENT IN terminal of TV.
Connection to a TV (Progressive) 1 Using component video cables, connect the COMPONENT VIDEO OUT terminal on the rear of the DVD player to the COMPONENT IN terminal of TV. Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of TV. Turn on the DVD player and TV. WHITE BLUE GREEN RED RED 3 Press the input selector on your TV remote control until the Component signal from the DVD player appears on the TV screen.
connections Connection to an Audio System (2 Channel Amplifier) 1 Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of the Amplifier. 2 Using the video signal cable(s), connect the VIDEO, COMPONENT OUT terminals on the rear of the DVD player to the VIDEO, COMPONENT IN terminal of your TV as described on pages 9 to 11. WHITE RED 3 Turn on the DVD player, TV, and Amplifier.
Connection to an Audio System (Dolby Digital, MPEG2 or DTS Amplifier) 1 ● CONNECTIONS If using a coaxial cable, connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of the DVD player to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier. 2 Using the video signal cable(s), connect the VIDEO COMPONENT OUT terminals on the rear of the DVD player to the VIDEO, COMPONENT IN terminal of your TV as described on pages 9 to 11. 3 Turn on the DVD player, TV, and Amplifier.
basic functions Playing a Disc Before Play - Turn on your TV and set it to the correct Video Input by pressing TV/VIDEO button on the TV remote control. - If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input. After plugging in the player, the first time you press the DVD POWER button, this screen comes up: If you want to select a language, press π/† button, then press the ENTER button.
Using the Search and Skip Functions Note Title During play, you can search quickly through a chapter or track, and use the skip function to jump to the next selection. Searching through a Chapter or Track DVD 2X, 4X, 64X, 128X VCD 4X, 8X CD 2X, 4X, 8X Chapter ) button on the Note - The speed marked in this function may be different from the actual playback speed. - No sound is hearing during search mode (Except CD).
basic functions Using the Title Menu Using the A-B Repeat function 1. During stop mode, press the MENU button on the remote control. 2. Press the π/† buttons to select Title Menu, then press the ® or ENTER button. 1. Press the REPEAT A-B button at the point where you want repeat play to start (A). 2. Press the REPEAT A-B button at the point where you want the repeat play to stop (B). 2. To return to normal play, press CANCEL button again.
advance functions Adjusting the Aspect Ratio (EZ View) 1. During play, press the INFO button on the remote control. 2. Press the π/† buttons to select Shortcut, then press the ENTER button. 3. Press the √/® buttons to select EZ View, then press the ENTER button. 4. Press the √/® buttons to select the desired item. WIDE SCREEN EZ VIEW If you are using a 16:9 TV For 16:9 aspect ratio discs - WIDE SCREEN Displays the content of the DVD title in 16:9 aspect ratio.
advance functions Press AUDIO / √ button at remocon repeatedly to select the desired Audio on MPEG4 then press the ENTER. MPEG4 Note AUDIO PCM 1/2 2. To remove the AUDIO icon, press the CANCEL or RETURN button. - This function depends on what subtitles are encoded on the disc and may not work on all DVDs. - A DVD disc can contain up to 32 subtitle languages. - To have the same subtitle language come up whenever you play a DVD; Refer to “Using the Subtitle Language” on page 25.
DVD Shortcut Bookmark Enter Bookmark Enter VCD Shortcut 3. Press the √/® buttons to select Bookmark, then press the ENTER button. 4. When you reach the scene you want to mark, press the ENTER button. Up to three scenes may be marked at a time. Clips Menu for MP3/WMA/ JPEG/MPEG4/CD Audio 1 - - Note - Depending on a disc, the Bookmark function may not work. Recalling a Marked Scene 1~3. The first 1~3 steps are the same as those for “Using the Bookmark Function” on page 18. 4.
advance functions Folder Selection - Random: Song files which have the same extension will be played in random order. The folder can be selected in Stop or Play mode. - To select the Parent Folder Press the RETURN button to go to parent folder, or press the π/† buttons to select “..” and press ENTER to go to the parent folder. - To select the Peer Folder Press the π/† buttons to select the desired folder, then press ENTER.
This unit supports all resolutions up to maximum below. MPEG4 Playback MPEG4 Play Function AVI files are used to contain the audio and video data. Only AVI format files with the “.avi” extensions can be played. 1. Open the disc tray. Place the disc on the tray. Stop a i a i a i a 4 T b b i 4 Enter Return 720 x 480 @30fps 720 x 576 @25fps : Maximum bitrate : 4Mbps Note • Some MPEG-4 files created on a personal computer may not be play back.
advance functions • Before beginning the Slide Show, the picture interval must be set. CD-R JPEG Disc - Only files with the “.jpg” and “.JPG” extensions can be played. • • • : When this icon is selected and ENTER is pressed, the pictures change automatically with about a 6 second interval. : The pictures change automatically with about a 12 second interval. - If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
karaoke function Karaoke Functions Operation Sequence Mic Volume / Key Control 1. Playback the Karaoke Disc containing the wanted songs. - Press the KARAOKE button to select Mic Volume and then press KARAOKE button again to select keycon. Note - If you hear feedback(squealing or howling) while using the karaoke feature, move the microphone away from the speakers or turn down the microphone volume or the speaker volume. - When playing MP3, WMA, DTS and LPCM disc, the karaoke functions will not operate.
changing setup menu Using the Setup Menu The Setup menu lets you customize your DVD player by allowing you to select various language preferences, set up a parental level, even adjust the player to the type of television screen you have. Setting Up the Language Features If you set the player menu, disc menu, audio and subtitle language in advance, they will come up automatically every time you watch a movie. Using the Player Menu Language 1.
Using the DivX Subtitle Language 1. With the unit in Stop mode, press the MENU button. 2. Press the π/† buttons to select Setup, then press the ® or ENTER button. 3. Press the π/† buttons to select Language Setup, then press the ® or ENTER button. 4. Press the π/† buttons to select Audio, then press the ® or ENTER button. 5. Press the π/† buttons to select the desired language, then press the ® or ENTER button.
changing setup menu ❶ Dolby Digital Out - PCM : Converts to PCM(2CH) audio. Setting Up the Display Options - Bitstream : Outputs Dolby Digital or DTS via the digital output. Select Bitstream when connecting to a Dolby Digital or DTS Decoder. ❷ MPEG-2 Digital Out - PCM : Converts to PCM (2CH) audio. - Bitstream : Converts to MPEG-2 Digital Bitstream (5.1CH). Select Bitstream when using the Digital Audio Output. ❸ Dynamic Compression Display options enable you to set various video functions of the player.
❹ TV System - Auto - NTSC : In case of using NTSC disc Setting Up the Parental Control • If your TV system only has PAL-Video input, you must choose “PAL”. When you choose “PAL”, Interlace output format is PAL 60 Hz output. - PAL : In case of using PAL disc Setting Up the Rating Level • If your TV system only has NTSC-Video input, you must choose “NTSC”. 1. With the unit in Stop mode, press the MENU button. 2. Press the π/† buttons to select Setup, then press the ® or ENTER button.
changing setup menu To make the setup menu disappear, press the MENU button. For example, if you select up to Level 6, discs that contain Level 7,8 will not play. 4. Press the π/† button to select Change Password, then press the ® or ENTER button. Enter your new password again. PARENTAL SETUP Rating Level :Kids Safe Change Password Changing the Password 1. With the unit in Stop mode, press the MENU button. 2. Press the π/† buttons to select Setup, then press the ® or ENTER button.
reference Firmware upgrade 2. Press the √/® buttons to select Total, then press the ENTER button. Introduction What improvements are made depends on the upgrade software you are using as well as the software that your DVD-player contained before the upgrade. How to make an upgrade disc Write the downloaded file onto a blank CD-R or CDRW disc, using the following settings: 1. You have to download a new file through Download Center of Samsung Internet Site (www.samsung.com). 2.
reference Troubleshooting Before requesting service (troubleshooting), please check the following. Problem No operations can be performed with the remote control. Disc does not play. Action • Check the batteries in the remote control. They may need replacing. • Operate the remote control at a distance of no more than 20 feet. • Remove batteries and hold down one or more buttons for several minutes to drain the microprocessor inside the remote control to reset it.
Specifications General Power Requirements AC 110-240 V, 50/60 Hz Power Consumption 8W Weight Dimensions 1.3 Kg 360mm (W) X 203mm (D) X 37mm (H) +5°C to +35°C Operating Humidity Range 10 % to 75 % DVD (DIGITAL VERSATILE DISC) ● REFERENCE Operating Temperature Range Reading Speed : 3.49 ~ 4.06 m/sec. Approx. Play Time (Single Sided, Single Layer Disc) : 135 min. CD : 12Cm Disc (COMPACT DISC) CD : 8Cm (COMPACT DISC) VCD : 12Cm Reading Speed : 4.8 ~ 5.6 m/sec. Maximum Play Time : 74 min.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Region North America Latin America Country CANADA MEXICO U.S.A ARGENTINE BRAZIL CHILE NICARAGUA HONDURAS COSTA RICA ECUADOR EL SALVADOR GUATEMALA JAMAICA PANAMA PUERTO RICO REP.
Memo
Memo
Memo
AK68-01777D
