DVD Player DVD-P148 DVD-P248K AK68-00411A
Precautions 1. Setting up * Refer to the identification label located on the back panel of your player for its proper operating voltage. * Install your player in a cabinet with adequate ventilation holes. (7~10cm) Do not block ventilation holes on any of the components for circulation of air. * Do not push the disc tray by the hand. * Do not stack components. * Be sure to turn all components off before moving the player. * Before connecting other components to this player, be sure to turn them off.
General Features Disc Type and Characteristics Excellent Sound Note Dolby Digital, a technology developed by Dolby Laboratories provides crystal clear sound reproduction. * Discs which cannot be played with this player. • DVD-ROM • DVD-RAM • CD-ROM • CDV • CDI • HD layer of super Audio CD • CDGs play audio only, not graphics. Screen Both regular and widescreen(16:9) pictures can be viewed. Slow Motion An important scene can be viewed in slow motion.
Description-Front Panel Description-Rear Panel DVD-P148 EZ VIEW STANDBY/ON PLAY LOADING Pr COAXIAL 1 4 5 6 7 8 9 1011 12 COMPONENT VIDEO OUT 13 R VOLUME DIGITAL ECHO VIDEO OUT 3 4 S-VIDEO OUT LOADING PLAY MAX MIN 1 2 3 4 5 6 7 8 9 10 11 12 13 Front Panel Controls 1. STANDBY/ON ( ) • When the player is plugged in, the Power LED lights. If you press the STANDBY/ON button to turn on the player, the LED goes out. 2. MIC • Connect Microphone for karaoke functions. 3.
Tour of the Remote Control Tour of the Remote Control DVD-P148 6. STOP Button ( DVD-P248K ) 6. STOP Button ( 7. MENU Button 1 7. MENU Button • Brings up the DVD player’s setup menu. 11 8. RETURN Button 2 • Brings up the DVD player’s setup menu. 11 1 8. RETURN Button 2 • Returns to a previous menu. • Returns to a previous menu. 9. REPEAT A-B Button 9. KARAOKE Button • Use to mark a segment to repeat between A and B. 12 13 14 3 4 4 11.
Choosing a Connection Choosing a Connection The following shows examples of connections commonly used to connect the DVD player with a TV and other components. Connection to a TV (For Video) TV (Normal, Widescreen, Projection, etc..) Before Connecting the DVD Player Method 1 Method 2 Method 3 Method 4 Good picture Better picture Best picture Optimum picture • Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.
Playing a Disc Using the Search & Skip Functions 7. Step Motion Play (Except CD) Before Play Press the STEP button on the remote during play. - Each time the button is pressed, a new frame will appear. - No sound is heard during STEP mode. - Press the PLAY/PAUSE ( ) to resume normal play. (You can only perform step motion play in the forward direction.) • Turn on your TV and press the TV/VIDEO button to select the video mode. • Turn on your Audio System and select AUX, CD or DVD.
Using the Display Function To access the desired title when there is Title more than one in the disc. For example, if there is more than one movie on a DVD, each movie will be identified. Using the Disc and Title Menu Using the Function Menu Using the Disc Menu Using the Function Menu 1. During the playback of a DVD disc, press the MENU button on the remote. 1. Press the MENU button during playback. 2. Select Disc Menu using the UP/DOWN buttons, then press the RIGHT or ENTER button.
Program Play & Random Play Program Play (CD) 1. Press the PROG button. 2. Use the LEFT/RIGHT buttons to select PROGRAM. Press the ENTER button. 3. Use the LEFT/RIGHT/UP/DOWN buttons to select the first track to add to the program. Press the ENTER button. The selection numbers appear in the Program Order box. 4. Press the PLAY/PAUSE ( ) button. The disc will be played in programmed order.
Selecting the Audio Language Selecting the Subtitle Language You can select a desired language quickly and easily with the AUDIO button. You can select a desired subtitle quickly and easily with the SUBTITLE button. Using the AUDIO button Using the SUBTITLE button 1. Press the AUDIO button. 1. Press the SUBTITLE button. 2. The Audio changes when the button is pressed repeatedly. - The audio languages are represented by abbreviations. 3. Press the AUDIO button to select Stereo, Left or Right.
Using the Bookmark Function This feature lets you bookmark sections of a DVD or VCD (MENU OFF mode) so you can quickly find them at a later time. Using the Bookmark Function (DVD/VCD) 1. During play, press the MENU button on the remote. 2. Use the UP/DOWN buttons to highlight Function, then press the RIGHT or ENTER button. Using the Zoom Function Clips Menu for MP3/WMA/JPEG Recalling a Marked Scene Using the Zoom Function (DVD/VCD) 1. Open the disc tray. 1.
Folder Selection MP3/WMA Play The folder can only be selected in the Stop mode. • To select the Parent Folder Press the RETURN button to go to parent folder, or use the UP/DOWN buttons to select “..” and press ENTER to go to the parent folder. • To select the Peer Folder Use the LEFT/RIGHT buttons to highlight left window. Use the UP/DOWN buttons to select the desired folder, then press ENTER. • To select the Sub-Folder Use the LEFT/RIGHT buttons to highlight right window.
Picture CD Playback Note • If no buttons on the remote control pressed for 10 seconds, the menu will disappear. Press the INFO button on the remote control to display the menu again. • Press the STOP button to return to the clips menu. • When playing a Kodak Picture CD, the unit displays the Photo directly, not the clips menu. CD-R JPEG Discs • Only files with the “.jpg” and “.JPG” extensions can be played.
Vocal Function Using the Setup Menu Setting Up the Language Features (DVD-P248K Only) Types of Karaoke disc • DVD Karaoke Disc Channel Karaoke -Channel 5CH. DVD 2CH.
Setting Up the Language Features Setting Up the Audio Options Using the Audio Language Using the Subtitle Language 1. With the unit in Stop mode, press the MENU button. 1. With the unit in Stop mode, press the MENU button. 1. With the unit in Stop mode, press the MENU button. 2. Select Setup using UP/DOWN buttons, then RIGHT or ENTER button. 2. Select Setup using UP/DOWN buttons, then RIGHT or ENTER button. 2. Select Setup using UP/DOWN buttons, then RIGHT or ENTER button. 3.
Setting Up the Display Options Setting Up the Display Options 1. With the unit in Stop mode, press the MENU button. Still Mode These options will help prevent picture shake in still mode and display small text clearer. 2. Select Setup using UP/DOWN buttons, then RIGHT or ENTER button. 1. Auto : When selecting Auto, Field/Frame mode will be automatically converted. 3. Select Display Setup using UP/DOWN buttons, then press the RIGHT or ENTER button. 2.
Setting Up the Parental Control CREATE PASSWORD Troubleshooting 5. Select Rating Level using UP/DOWN buttons, and press ENTER or RIGHT button. Before requesting service (troubleshooting), please check the following. Problem Re-enter Password - - - - 0~9 • Check the batteries in the remote. They may need replacing. • Operate the remote control at a distance of no more than 20 feet.
Specifications General Power Requirements AC 110~240 V, 50/60 Hz Power Consumption 12 W Weight 1.8 Kg Dimensions Operating Temperature Range Operating Humidity Range DVD (DIGITAL VERSATILE DISC) Disc 10 % to 75 % Reading Speed : 3.49 ~ 4.06 m/sec. Approx. Play Time (Single Sided, Single Layer Disc) : 135 min. Reading Speed : 4.8 ~ 5.6 m/sec. Maximum Play Time : 74 min. CD : 8Cm (COMPACT DISC) Reading Speed : 4.8 ~ 5.6 m/sec. Maximum Play Time : 20 min. Reading Speed : 4.8 ~ 5.6 m/sec.