HT-E350K HT-E353K HT-E353HK HT-E355K Digital Home Entertainment System user manual Imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.
Safety Information Safety Warnings TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury. CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Precautions • Ensure that the AC power supply in your house complies with the identification sticker located on the back of your product. • Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (7.5~10cm). • Do not place the product on amplifiers or other equipment which may become hot. Make sure the ventilation slots are not covered. • Do not stack anything on top of the product. • Before moving the product, ensure the Disc Insert Hole is empty.
Safety Information Cautions on Handling and Storing Discs Small scratches on the disc may reduce sound and picture quality or cause skipping. Be especially careful not to scratch discs when handling them. Holding discs • Do not touch the playback side of the disc. • Hold the disc by the edges so that fingerprints will not get on the surface. • Do not stick paper or tape on the disc. Disc Storage • Do not keep in direct sunlight • Keep in a cool ventilated area • Keep in a clean Protection jacket.
Contents SAFETY INFORMATION 2 GETTING STARTED 7 CONNECTIONS 13 20 Safety Warnings Precautions Accessories Cautions on Handling and Storing Discs Licence Copyright Copy Protection 7 7 10 10 11 12 Icons that will be used in manual Disc Types and Characteristics Description Front Panel Rear Panel Remote control 13 17 18 19 19 Connecting the Speakers Connecting the Video Out to your TV Connecting Microphone Connecting the FM Antenna Connecting Audio from External Components 20 20 21 21 21 21 21 21 22 2
Contents BASIC FUNCTIONS 26 ADVANCED FUNCTIONS 26 26 27 27 31 33 Disc Playback Audio CD(CD-DA)/MP3/WMA Playback JPEG File Playback Using the Playback Function Sound Mode Listening to Radio 34 34 USB Function USB Recording 35 36 37 39 Troubleshooting Language code list Specifications OpenSSL License 34 OTHER INFORMATION 35 • Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Make sure to check the following terms before reading the user manual. Icon d B A G D ! ✎ Term Definition DVD This involves a function available with DVD-Video or DVD±R/±RW discs that have been recorded and finalised in Video Mode. CD This involves a function available with a data CD (CD DA, CD-R/-RW). MP3 This involves a function available with CD-R/-RW discs. JPEG DivX CAUTION This involves a function available with CD-R/-RW discs. This involves a function available with MPEG4 discs.
Getting Started Disc Types and Characteristics Disc types that can be played Disc Types & Mark (Logo) Recorded Signals Characteristics DVD video VIDEO DVD-VIDEO DVD-R/DVD-RW IN DVD video FORMAT DVD+R/DVD+RW IN DVD video FORMAT AUDIO AUDIO CD AUDIO AUDIO CD AUDIO-CD DivX + VIDEO DATA CD CD-R/CD-RW in AUDIO CD FORMAT CD-R/CD-RW in DATA CD FORMAT that contains the following kinds of files and conforms to ISO 9660 LEVEL 1/LEVEL 2, OR JOLIET (EXTENDED FORMAT) -MP3 files -JPEG Image files -MPEG 4 V
01 Getting Started DVD±R/±RW, CD-R/RW Discs • Software updates for incompatible formats are not supported. (Example : QPEL, GMC, resolutions higher than 800 x 600 pixels, etc.) • If a DVD-R/-RW disc has not been recorded properly in DVD Video format, it will not be playable. Supported Formats (DivX) This product only supports the following media formats.If both video and audio formats are not supported, the user may experience problems such as broken images or no sound.
Getting Started Description Front Panel 1 2 3 4 5 6 7 8 9 10 5V 500mA MIC 1 MIC 2 11 1 DISC TRAY Insert disc here. 2 DISPLAY Displays the playing status, time, etc. 3 USB PORT Connect here and play files from external USB storage devices such as MP3 players, USB flash memory, etc. The USB memory that requires high power (more than 500mA at 5V) may not be supported.
01 Getting Started Rear Panel 1 2 3 SPEAKERS OUT FRONT SURROUND CENTER FRONT SUBWOOFER SURROUND FA NET (Only For Service) SPEAKER IMPEDANCE : 3 4 5 6 VIDEO OUT AUX IN FM ANT HDMI OUT 1 FA NET (Only for Service) Used for the service repair. 2 SPEAKERS OUTPUT CONNECTORS Connect the front, center,surround speakers and subwoofer. 3 VIDEO OUT JACK Connect your TV's Video Input jack (VIDEO IN) to the VIDEO OUT jack.
Getting Started Remote control Tour of the Remote Control Turn the product on and off. Cut off the sound temporarily. Select the desired Dolby Pro Logic II audio mode. Press numeric buttons to operate options. 8,9 Microphone volume button: Adjust the microphone's volume. 0. ECHO button: Adjust the echo level of the microphone. 1. S.VOL button:Regulate and stabilize the volume level against a drastic volume change. FUNCTION MUTE DSP/EQ Select the desired DSP/EQ audio mode.
02 Connections Connections This section involves various methods of connecting the product to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord. Connecting the Speakers Position of the product SW Place it on a stand or cabinet shelf, or under the TV stand. Selecting the Listening Position The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV.
Connections Speaker Components HT-E350K (L) (R) (L) (R) SURROUND FRONT CENTER SUBWOOFER Assembled Speakers Speaker Components HT-E353K HT-E353K (L) (R) CENTER SPEAKER STAND BASE SUBWOOFER FRONT STAND (L) (R) SPEAKER CABLE CENTER SURROUND FRONT SPEAKER SCREW (5×15): 8EA HT-E353HK (L) SURROUND SPEAKER SUBWOOFER HT-E353HK STAND DRIVER (R) (L) (R) SURROUND SPEAKER FRONT SUBWOOFER CENTER SURROUND STAND NUT SUBWOOFER FRONT SPEAKER STAND BASE HT-E355K CENTER SPEAKER HT-E355K
02 1 Stand Base Connections Installing the Speakers on the Tallboy Stand 2 * HT-E353K - FrontSpeakers HT-E355K - Front/Surround Speakers Stand 1. Turn the Stand Base upside-down and connect it to the Stand. 2. Insert three screws (5*15, For connecting Stand & Stand Base) clockwise 3 into the three holes marked using a screwdriver as shown in the illustration. 4 Speaker ! CAUTION : When you use a torque screwdriver, be careful not to put excessive force. Otherwise, it runs idle or can be damaged.
Connections Connecting The Speakers 1. Press down the terminal tab on the back of the speaker. (HT-E353K/355K Only) 2. Insert the black wire into the black terminal (–) and the red wire into the red terminal (+), and then release the tab.(HT-E353K/355K Only) Black 3. Connect the connecting plugs to the back of the product by matching the colours of the speaker plugs to the speaker jacks. Red Connecting the wall mount 1.
02 Connecting the Video Out to your TV Connections Choose one of the two methods for connecting to a TV. METHOD2 (supplied) VIDEO OUT FM ANT AUX IN HDMI OUT METHOD1 METHOD 1 : HDMI Connect an HDMI cable (option) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV. METHOD 2 : Composite Video Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO IN jack on your TV.
Connections HDMI FUNCTION HDMI Auto Detection Function • What is the HDCP? • HDCP (High-band width Digital Content Protection) is a system for protecting DVD content outputted via HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a display device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized copies from being made.
02 SPEAKERS OUT FRONT SURROUND CENTER FRONT SUBWOOFER SURROUND FA NET (Only For Service) SPEAKER IMPEDANCE : 3 Connections Connecting the FM Antenna VIDEO OUT AUX IN FM ANT HDMI OUT FM Antenna (supplied) 1. Connect the FM antenna supplied to the FM Antenna jack. 2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface. ✎ NOTE This product does not receive AM broadcasts.
Setup Before Starting (Initial Settings) 1. Press the POWER button when it is plugged in TV for the first time. Initial Settings screen will be displayed. Setting the Setup menu The access step may differ depending on the selected menu. The GUI (Graphical User Interface) in this manual may differ, depending on the firmware version.
03 You can configure various display options such as the TV Aspect, Resolution, etc. TV Aspect Depending on the type of television you have, you may want to adjust the screen setting. • On : The original resolution of the DVD disc will be output to the TV direct. • Off : The output resolution will be fixed according to the Resolution previously set, regardless of the resolution of the disc.
Setup Adjusting Front/Surround Bal. You can select between 0 and -6. The volume decreases as you move closer to –6. Audio Speaker Setting Speaker Size You can set the Speaker Size of the Center and Surround Speakers, as well as Test Tone in this mode. Settings Delay Time Speaker Setting Speaker Size ► Sound Edit Delay Time Test Tone mMove Adjusting Center/Surround/Subwoofer Level The volume level can be adjusted in steps from +6dB to –6dB.
03 Setup Ideal Center Speaker placement Test Tone Settings Speaker Setting Speaker Size Sound Edit Delay Time Test Tone Ideal Surround Speaker placement Place all speakers within this circle. Df: The distance from Front Speaker Dc: The distance from Center Speaker Ds: The distance from Surround Speaker Setting the Center Speaker If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms. Otherwise, change the setting according to the table.
Setup Speaker Selection The audio signals transmitted over the HDMI Cable can be changed Home Theater/TV Speaker. • Home Theater : Video is transmitted over the HDMI connection cable only, and audio is output through the product speakers only. • TV Speaker : Both video and audio signals are transmitted over the HDMI connection cable, and audio is output through your TV speakers only. ✎ NOTE The default setting of this function is Home Theater .
03 You can select the language you prefer for on-screen menu, disc menu, etc. OSD Language Disc Menu Select the language for the on-screen displays. Select the language for the disc menu displays. Setup Language Change Password Select Change and enter the 4-digit password to set the parental lock using the number buttons on the remote control. Settings Display Parental Rating : Off Audio Password : Change ► System Language Audio Select the language for disc audio.
Basic Functions Disc Playback Audio CD(CD-DA)/MP3/WMA Playback 1. Press the OPEN/CLOSE () button. BA 2. Place a disc gently into the tray with the disc's label facing up. 3. Press the OPEN/CLOSE () button to close the disc tray. Track01 1/17 ✎ NOTE Resume function: When you stop disc play, the product remembers where you stopped, so when you press PLAY button again, it will pick up where you left off. (This function works only with DVDs.
04 Using the Playback Function Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then played back with this product. Forward/Reverse Search dBAD 1. Insert a JPEG disc on the disc tray. 2. Press the ◄► buttons to select Photo, and then press the ENTER button. Press the buttons for Search Function. 3. Press the ▲▼ buttons to select the folder you want to play, and then press the ENTER button. 4.
Basic Functions Step Motion Play Using the Title Menu dD Press the PAUSE button repeatedly. • The picture moves forward one frame each time the button is pressed during playback. ✎ NOTE No sound is heard during step motion playback. For DVDs containing multiple titles, you can view the title of each movie. TITLE MENU 1. During playback, press the TITLE MENU button on the remote control. 2. Press the ▲▼◄► buttons to make the desired selection, then press the ENTER button.
04 Displaying Disc Information 1. During the CD/ MP3 playback, press the REPEAT button repeatedly to select the repeat mode you want. B d 1/1 2/20 (Repeat Off Repeat Track Repeat All Random Repeat Section A-B) 0:05:21 1/1 EN 5.1CH 1/1 EN 1/1 A Change Select (Repeat Off Repeat Track Repeat Dir (Directory) Repeat All Random) D A-B Repeat Playback dB 1/6 1/1 1/1 EN You can repeatedly play back a designated section of a DVD or CD. Change Select 1.
Basic Functions TOOLS menu Title( ) : To access the desired title when there is more than one in the disc. For example, if there is more than one movie on a DVD, each movie will be identified as a Title. Chapter( ) : Most DVD discs are recorded in chapters so that you can quickly find a specific chapter. Playing time( ) : Allows playback of the film from a desired time. You must enter the starting time as a reference. The time search function does not operate on some discs.
04 GIGA You can adjust the brightness of the display on the main unit. The GIGA Sound Function amplifies bass and improves bass twice as much for you to appreciate powerful real sound. The GIGA Sound feature will be applied only to the subwoofer. MY KARAOKE Press the DIMMER button. Press the GIGA button. Sound Mode P.BASS The P.BASS function provides a bass boost to reinforce the low frequencies. The MP3 ENHANCE function provides better sound quality by upscaling the sampling frequency. Press the P.
Basic Functions DSP (Digital Signal Processor)/EQ Dolby Pro Logic II Mode • DSP (Digital Signal Processor) : DSP modes have been designed to simulate different acoustic environments. • EQ : You can select POPS, JAZZ , ROCK, or USER to optimize the sound for the genre of music you are playing. You can select the desired Dolby Pro Logic II audio mode. Press the PL II button. DSP /EQ Press the DSP/EQ button.
04 Using buttons on the Remote Control 1. Press the FUNCTION button to select FM. 2. Tune in to the desired station. • Preset Tuning 1 : You must first add a desired frequency as a preset. Press the STOP () button to select PRESET and then press the TUNING/CH ( ) button to select the preset station. • Manual Tuning : Press the STOP () button to select MANUAL and then press the TUNING/CH ( ) button to tune in to a lower or higher frequency.
Advanced Functions USB Function USB Recording Playing Media Files using the USB Host Feature You can enjoy media files such as pictures, movies and music saved on an MP3 player, USB memory stick or digital camera in high quality video with 5.1 channel sound by connecting the storage device to the USB port of the product. 5V 500mA MIC 1 MIC 2 1. Connect the USB device to the USB port on the front panel of the product. 2. Press the FUNCTION button to select USB.
06 Other Information Refer to the chart below when this product does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off the product, disconnect the power cord, and contact the nearest authorized dealer or Samsung Electronics Service Centre. Symptom Check/Remedy I cannot eject the disc. • Is the power cord plugged securely into the outlet? • Turn off the power and then turn it back on. Playback does not start.
Other Information Symptom Check/Remedy • The product is not working. (Example: The power goes out or the front panel key doesn't work or a strange noise is heard.) • The product is not working normally. The rating level password has been forgotten. Can't receive radio broadcast. • Press and hold the STOP () button on the remote control for longer than 5 seconds with no disc (reset function). Using the RESET function will erase all stored settings. Do not use this unless necessary.
06 Other Information Specifications Video Output Composite Video Video/Audio HDMI 2.04 Kg 430 (W) x 61 (H) x 230 (D) mm +5°C~+35°C 10 % to 75 % 60 dB 10 dB 1% Reading Speed : 3.49 ~ 4.06 m/sec. Approx. Play Time (Single Sided, Single Layer Disc) : 135 min. Reading Speed : 4.8 ~ 5.6 m/sec. Maximum Play Time : 74 min. Reading Speed : 4.8 ~ 5.6 m/sec. Maximum Play Time : 20 min. 576i(480i) 1 channel : 1.
Other Information HT-E353K Speaker system Speaker Impedance Frequency range Output sound pressure level Rated input Maximum input Dimensions (W x H x D) Weights 5.1ch speaker system Front 3Ω 140Hz~20KHz 86dB/W/M Surround 3Ω 140Hz~20KHz 86dB/W/M Center 3Ω 140Hz~20KHz 86dB/W/M Subwoofer 3Ω 20Hz~160Hz 88dB/W/M 35W 35W 95W 95W 70W 70W 190W 190W Front : 89 x 1053 x 71 mm (stand base : 229 x 229) Surround:77 x 107 x 68 mm Center : 228 x 77 x 70 mm Subwoofer : 154 x 299 x 285 mm Front: 2.
OpenSSL License The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL please contact openssl-core@openssl.org. OpenSSL License Copyright (c) 1998-2007 The OpenSSL Project. All rights reserved.
OpenSSL License Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Area ` North America Canada Mexico U.S.A Contact Centre Web Site 1-800-SAMSUNG (726-7864) 01-800-SAMSUNG (726-7864) 1-800-SAMSUNG (726-7864) www.samsung.com www.samsung.com www.samsung.
AH68-02460K Code No.
