DVD-C350 DVD-C350K DVD-C450K DVD Player User Manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.
precautions 1. Setting up - Refer to the identification label located on the rear of your player for its proper operating voltage. - Install your player in a cabinet with adequate ventilation holes. (7~10cm) Do not block ventilation holes on any of the components for air circulation. - Do not push the disc tray in by hand. - Do not stack components. - Be sure to turn all components off before moving the player. - Before connecting other components to this player, be sure to turn them off.
Note - Discs which cannot be played with this player. • DVD-ROM • DVD-RAM • CD-ROM • CDV • CDI • CVD • CDGs play audio only, not graphics. - Ability to play back may depend on recording conditions. • DVD-R, +R • CD-RW • DVD+RW, -RW (V mode) - The unit may not play certain CD-R, CDRW and DVD-R due to the disc type or recording conditions. COPY PROTECTION Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVD player directly to your TV, not to a VCR.
Tour of the Remote Control DVD-C450K 1 2 12 3 4 5 6 7 14 15 13 16 17 18 8 9 10 19 20 21 11 DVD-C350K DVD-C350 1 11 2 12 13 3 4 14 15 5 16 6 7 17 18 8 9 10 19 20 21 1. DVD POWER Button Turns the power on or off. 2. REPEAT Button Allows you to repeat play a title, chapter, track, or disc. 3. DISC MENU Button Brings up the Disc menu. 4. BOOKMARK Quickly find bookmark sections of a DVD. 5. SEARCH Buttons ( / ) Allow you to search forward/ backward through a disc. 6. STOP Button ( ) 7.
- Set the Video Output to I-SCAN/P-SCAN in the Display Setup menu. You can use the VIDEO SEL. button to change the Video Output mode. Note - What is "Progressive Scan"? Progressive scan has twice as many scanning lines as the interlace output method has. Progressive scanning method can provide better and clearer picture quality.
To access the desired title when there is more than one in the disc. For example, if there is more than one movie on a DVD, each movie will be identified. Most DVD discs are recorded in chapters so that you can quickly find a specific passage. Allows playback of the film from a desired time. You must enter the starting time as a reference. The time search function does not operate on some disc. Refers to the subtitle languages available in the disc.
Selecting the Subtitle Language You can select a desired subtitle quickly and easily with the SUBTITLE (π) button. Using the SUBTITLE / π button (DVD/MPEG4) 1. Press the SUBTITLE (π) button. The subtitle languages are represented by abbreviations. The subtitle changes when the button is pressed repeatedly Press SUBTITLE (π) button at remocon repeatedly to select the desired subtitle language on a MPEG4 then press the ENTER. 2. To remove the SUBTITLE icon, press the SUBTITLE (π) button.
- When naming your MP3 or WMA files, do not exceed 8 characters, and enter “.mp3, .wma” as the file extension. General name format : Title.mp3. or Title.wma. When composing your title, make sure that you use 8 characters or less, have no spaces in the name, and avoid the use of special characters including: (.,/,\,=,+). - Use a decompression transfer rate of at least 128 Kbps when recording MP3 files. Sound quality with MP3 files basically depends on the rate of compression/ decompression you choose.
Playing Media File Using the USB Host feature (Only DVD-C450K) You can enjoy the media files such as pictures, movies and tunes saved in an MP3 player, USB memory or digital camera in high audio by connecting the storage device to the USB port of the DVD Player. Using the USB HOST feature 1. Connect the USB device to the USB port on the front of the unit. 2. Press the π/† buttons to select a file in USB. Press ENTER to Open file.
Slide show - When you press the ENTER/PLAY at JPEG file,it will go to full screen mode and automatically slide show. Note - Depending on a file size, the amount of time between each picture may be different from the manual. - If you don’t press any button, the slide show will start automatically in about 10 seconds by default. CD-R JPEG Disc - Only files with the “.jpg” and “.JPG” extensions can be played.
- Select “Original” if you want the default soundrack language to be the original languange the disc is recorded in. - Select “Automatic” if you want the subtitle language to be the same as the language selected as the audio language. - Some discs may not contain the language you select : in that case the disc will use its original languange setting. Setting Up the Audio Options Audio Options allows you to setup the audio device and sound status settings depending on the audio system in use. 1.
Reference memo Troubleshooting Before requesting service (troubleshooting), please check the following. Problem Action The screen is blocked • Press the ■ / button (in front panel) for more than 5 seconds under no disc inside. All settings will revert to the factory settings. Forgot password. • Press the ■ / button (in front panel) for more than 5 seconds under no disc inside. All setings including the password will revert to the factory settings. Don’t use this unless absolutely necessary.
memo
memo
memo
$POUBDU 4".46/( 803-% 8*%& *G ZPV IBWF BOZ RVFTUJPOT PS DPNNFOUT SFMBUJOH UP 4BNTVOH QSPEVDUT QMFBTF DPOUBDU UIF 4".
